Kitchen facade in PVC film: features, advantages and disadvantages of coating

One of the most popular and sought-after solutions for decorating kitchen facades is the use of PVC film. You've probably seen this kind of furniture in stores and in friends' kitchens.

Film facades are considered the most affordable and very practical. Let's take a closer look at these products - look at the advantages and disadvantages, and also find out what problems you may encounter when using furniture and how to avoid them.

What is chipboard lamination and how to laminate furniture at home: Review + Video

Furniture lamination is the process of applying a special film or paper to the material, after which its appearance becomes more expensive and elegant. Furniture made from chipboard is subject to lamination - a cheap and therefore in-demand building material that is quite durable, but does not look very presentable.

It allows you to make repairs economically, and laminating furniture at home will smooth out all the shortcomings of the slab and will be a practical, non-wasteful solution.

1. Main questions
2. How to laminate chipboard with your own hands
3. Process
4. Which laminating film should I choose?
5. Preparation for lamination
6. Other methods of processing furniture

Photos of kitchens with PVC film facades

>

Thus, PVC-coated facades are an inexpensive, stylish and practical option for decorating kitchen furniture. A wide selection of shades and textures will help you decorate your kitchen in any style. And if the operating rules are followed, panels covered with film will last a very long time.

Main questions

What is "chipboard"?

Chipboard stands for “chipboard.” From the name you can understand that this is not a separate type of wood, but a mixture of wood shavings, held together with glue and placed under a press. This material is inexpensive and is used instead of scarce wood, it is easy to work with and durable, which is what arouses interest. Thanks to modern decorating techniques, chipboard will become a worthy replacement for expensive wood, the extraction of which, moreover, causes enormous harm to our environment.

ADVICE! Laminated chipboard can be immediately purchased at the factory, it can be made to order, but you can independently process a regular pressed board using laminating agents.

Why laminate chipboard?

Looking at a product made from chipboard, it becomes clear why it is recommended to laminate the raw material. Firstly, it does not look very beautiful, its decorative qualities leave much to be desired. Secondly, lamination will smooth the surface, make it more pleasant to the touch and help avoid the danger of splinters, scratches or snags on thin fabric. Thirdly, the procedure will significantly improve the quality of the product, making it more moisture resistant, which is very useful for kitchen furniture.

Decorative qualities of PVC film facades for kitchen units

Kitchen PVC facades can have a variety of colors and textures. Film manufacturers take into account fashion trends: as soon as a certain material becomes popular, they produce a PVC coating that imitates its shade and texture. Thanks to this technique, you can purchase facades “metal-like,” “wood-like,” or “glass-like.”

The film can be:

• glossy;
• matte;
• mirror

Thanks to modern technologies, various images and patterns can be applied to PVC coatings. 3D drawings that imitate three-dimensional details - stucco molding, milling or decorative carvings - have become widely popular.

How to laminate chipboard with your own hands

Process

Laminating chipboard at home involves applying a special film to the surface.

ATTENTION! It is impossible to reproduce the perfect finishing of furniture at home. Factories immediately produce furniture made from laminated chipboard (chipboard), the quality of which will be better and the service life will be longer, with the remaining savings.

There are several ways to laminate furniture at home:

• — Application of self-adhesive film to the surface. Simply remove the layer of protective paper and carefully apply it to the furniture. After the film has stuck, remove air bubbles with a plastic spatula or cloth.
• — Gluing the film with glue. Universal adhesive is applied to the slab and left for a while, after which a film is applied to it. For high-quality gluing, it is recommended to roll it over and hold it under pressure.

BE CAREFUL! When applying the film, carefully measure the shape and surface area, because if you apply the laminate material crookedly, it will be impossible to reuse it - re-glue it.

Which laminating film should I choose?

For lamination of chipboards, several types of films have been developed, which differ in their properties, composition and cost:

• — Phenolic film. Its properties include increasing the wear resistance of materials in terms of mechanical damage, but also having a low moisture resistance.
• — PVC (Polyvinyl chloride). The functionality of this film is aimed at improving the water resistance of furniture.
• — Melamine film. Its properties include wear resistance and moisture resistance, however, the membrane contains formaldehyde resin, which can cause some damage to health when heated. This product should be used outdoors. Cooled material is not hazardous.

Preparation for lamination

Before applying film to furniture, you need to prepare it for the procedure:

1) First we sand the product. This can also be done with sandpaper - if it is not large in size, or, if it is large in size - with a grinder. Sand until the furniture walls are smooth.

2) Then it is recommended to putty the chipboard, dry it and go over it again with less sandpaper.

IMPORTANT! The smoother the surface, the more accurately the film will sit.

3) Next, the workpiece is treated with a wood primer and dried.

4) It is necessary to cut the film, adjusting it according to the details - take into account the height, width, shape and corners of the furniture.

5) Next, proceed to gluing the film: having freed part of the protective layer, apply it to the surface of the furniture and gradually move along it.

Which film to choose for lamination?

In factory conditions, chipboard lamination is carried out using:

• laminated paper impregnated with resins;
• impregnated papers made from similar materials.

When using resin impregnation, the paper can be given moisture-repellent properties, and a thick layer of material allows for embossing that imitates the texture of valuable wood or stone.

Both natural veneer and thermoplastic synthetic films are used as coating. In each case, the chipboard processing technology is slightly different, but in everyday life all materials with a moisture-resistant coating are called laminated.

When choosing ready-made slabs for making furniture, you should inquire about the gluing method:

• laminated chipboard does not differ in appearance from laminate, but has less coating strength;
• veneered products always have a natural wood pattern; you can consider individual coating plates;
• covered with synthetic veneer (film) differ from natural ones in their low price and the absence of strips of wooden cladding in the design.

Often, when making furniture on their own, craftsmen try to laminate chipboard at home to save money. Due to the complexity of the industrial process, it is not possible to reproduce it, and chipboard cladding is carried out with different types of synthetic film.

There are several types of coating suitable for installation at home:

1. Melamine film. The material contains phenol-formaldehyde resins, which are hazardous to health when heated. Laminating furniture at home should be done with good ventilation. After cooling, the material becomes safe and forms a thick and durable layer with moisture-repellent properties on plywood or chipboard. Melamine is most often used for edge finishing.
2. PVC. PVC membranes may have an adhesive layer, but are sometimes produced without it. In the latter case, you can glue the laminate onto the chipboard using universal adhesives. It is better to choose them immediately when purchasing the material. Treating particle boards with self-adhesive is the easiest way to apply a waterproof and decorative coating.
3. Phenolic film. It is not highly moisture resistant, but it protects surfaces well from mechanical stress.

Having chosen the right material, you can laminate chipboard yourself without special equipment.

Other methods of processing furniture

In addition to simply applying film to glue or gluing self-adhesive tape, there are several other methods for processing chipboard furniture:

• — Laminating. In this method, glue is applied to the product, and then a thermal film of a polymer composition is applied.
• — Veneering. Veneer is a very thin layer of high-quality wood, if natural, if synthetic - paper canvas with imitation of wood patterns. Using molten resins, such material is welded to the base under the influence of high temperatures.

Thus, laminating furniture at home is quite easy and the quality depends solely on your efforts.

Rules for care and operation - how to extend the service life of a kitchen facade with PVC film coating

The quality of care for PVC facades has a serious impact on their durability and appearance.

To make your furniture pleasing to the eye longer, follow these recommendations:

• do not use abrasive and chemically aggressive chlorine-based detergents to clean the panels;
• protect facades from mechanical damage - scratches and impacts;
• do not expose surfaces to temperatures above 70. If a cabinet with a PVC facade is located above the hob, it is advisable to use a powerful hood;
• Film overcooling is not allowed - up to - 15.

But what to do if the PVC film peels off? In this case, you must first check whether the warranty period for the furniture has expired. If not, the manufacturer will restore the furniture himself, but only if you followed the recommendations for caring for the furniture.

If the warranty period has expired or the coating has peeled off due to careless handling of the facades, you can restore the film yourself.

To do this you will need glue or liquid nails. You can also use PVA; PVA Moment Joiner is especially suitable. It needs to be drawn into a medical syringe (you can use a special glue gun) and carefully inserted under the peeled off section of the film. Then press firmly and remove the remaining substance with a cloth.

How to laminate chipboard at home?

Share on social media networks:

• Features of obtaining laminated chipboard
• Do-it-yourself methods for laminating chipboard
• How to laminate chipboard at home: laminating technology
• Selecting lamination film
• Video material

Chipboard is one of the most inexpensive materials, which is still not abandoned in the manufacture of furniture. In general, with proper design, interior items look like a worthy imitation of natural wood and add their own flavor to the overall style. But ordinary chipboard is not suitable for this purpose. The plate looks unpresentable. In addition, there is a risk of getting splinters if you carelessly touch the edge. About 40 years ago, a technology for producing decorative surfaces using lamination was developed. Let's take a closer look at how to laminate chipboard with your own hands at home.

Why is lamination needed?

Cheap and fairly durable chipboard is the most popular material for the manufacture of inexpensive furniture. In their natural form, pressed slabs made from shavings and sawdust do not look very decorative, so manufacturers finish their surface and edges with films of plastic or paper impregnated with synthetic resins. Lamination involves the process of pressing and gluing films onto a board.

The coating not only makes the material more decorative. Laminated chipboard is characterized by higher moisture resistance compared to the original material. This makes it possible to use laminated chipboard for the manufacture of kitchen units and other cabinet furniture that has to come into contact with a humid environment.

Features of obtaining laminated chipboard

Chipboard (chipboard) is used for the manufacture of furniture in the “medium” and “economy” classes. If the surface is covered with a decorative and protective material, then we are talking about laminated chipboard (LDSP).

For cladding laminated chipboards the following is used:

• The plastic is laminated paper, impregnated with a resin composition.
• Paper film impregnated with synthetic thermosetting resins.

When producing chipboard in a factory, a conveyor or short-cycle belt press is used. Under conditions of high pressure and temperature, the resin spreads over the surface and forms a durable, solid web.

• 
  How to choose coffee sets for the garden?

• Features of purchasing custom-made kitchen furniture

• Choosing the perfect sofa

Important! Modern equipment used in enterprises makes it possible to achieve a realistic imitation of the texture of wood, textiles, and ornamental stone. Laminated chipboard is produced with a glossy, embossed surface, as well as with a 3D effect.

Alternative technologies:

1. Another technology for decorating chipboard is often confused with the lamination process: lamination. In classic lamination, the resin is melted and then pressed. Laminating involves gluing. An adhesive is applied to the base, then a polymer thermoplastic film or laminated paper is applied.

Important! This material is less durable and can swell and deform. As for the laminated board, it is a single inseparable whole.

1. There is another technology reminiscent of lamination - veneering. Veneer is the thinnest layer of noble wood. The veneer thickness is from 2 mm. Gluing to the veneer surface is carried out using adhesive compounds: one- or two-component.

Important! The surface doesn't just look beautiful. It is truly unique, since the natural grain of the wood is preserved. Veneer is quite demanding to maintain. It can be painted, varnished, impregnated or waxed. If the coating comes off, experts recommend using universal or carpenter's adhesive.

1. Sometimes you can find such a definition as synthetic veneer. This is a paper canvas with a texture that imitates the unevenness of wood, impregnated with urea resin. Sometimes the surface is varnished.

Important! The material is durable, hard, and feels identical to wood veneer.

Lamination, therefore, is a technology of “welding” decorated paper to a base using synthetic molten resins. The resulting surface is resistant to high temperatures, moisture and mechanical stress.

Two disadvantages and ways to eliminate them

Now let's look at the shortcomings of the material. The most significant is the likelihood of film peeling under the influence of steam, moisture and temperature changes. It is also worth noting that PVC film has the following disadvantages:

• Does not tolerate mechanical damage well. Any impact or cleaning with hard brushes can lead to scratches and defects.
• Cannot be restored. If one cabinet door is damaged, it will not be possible to re-glue part of it. You'll have to remove the door and look for a replacement.

It is worth noting here that many reviews from kitchen owners with film facades talk about precisely these shortcomings.

What can we recommend to make your facades last as long as possible? First, install a good hood. Then the film will have no chance to peel off. Second, choose a reliable manufacturer. Why is it important? If you need to replace the door, you can contact the manufacturer directly and get an identical color and size.

The next photo shows the design of the kitchen with an interesting color scheme for the facades.

In the photo: a film with an interesting pattern is glued to the kitchen facades.

Do-it-yourself methods for laminating chipboard

Of course, it is impossible to accurately reproduce the factory process of chipboard lamination with your own hands. If only because you have neither professional skills nor specialized equipment. In addition, the compositions used for industrial lamination contain toxic substances.

The best option is laminating:

• Chipboard cladding using self-adhesive film. This is a dense canvas made of synthetic material with an adhesive applied to the reverse side.

Important! It is enough to remove the layer of protective paper and glue the film to the surface. Air bubbles can be removed with a plastic spatula or soft cloth.

• Gluing a film of polymer material using universal glue. The glue is applied to the chipboard and left for a short time. Then the film is carefully glued. For better adhesion, it is rolled with a roller or pressed with a press.

Important! Of the two options given, the second one is more reliable. As practice shows, self-adhesive tape has to be re-glued periodically or a new one must be purchased. The savings are quite dubious. The best option is to purchase chipboard with industrial lamination.

• Upholstered furniture in Perm

• Beds with soft panels at the head: stylish solution and comfort

• Ideas for arranging furniture in a small room

Types of PVC film

1. In order to apply a coating to the relief surfaces of MDF products, milled table tops, as well as other paneled surfaces, use a machine with a vacuum press and PVC with a thickness of 0.3-0.5 mm, less often 0.25 mm.
2. To laminate MDF products, a film is used, the thickness of which is 0.3-0.5 mm, and the entire lamination process is done on a special facing machine. This process is also applied to linear products made from materials such as plastic, wood or metal.
3. For laminating smooth surfaces that do not have patterns, use a film whose thickness is 0.25-0.3 mm, no more.

How to laminate chipboard at home: laminating technology

This part of the article is dedicated to stubborn people who are used to doing everything on their own. So, the procedure for gluing a chipboard board with a synthetic film is as follows:

• Cleaning and puttying the slab. The result is an absolutely smooth and even surface.
• Surface primer with any wood composition.
• Open the films. For this you will need: scissors, a pencil and a tape measure. You can get a perfectly smooth edge using a utility knife and a guide.

Important! The centimeter grid on the back of the film makes cutting more convenient.

• Separating the film from the protective base and gluing it to the surface of the chipboard.

Important! To make the film lie evenly, you need to smooth it with a clean, dry cloth from the center to the edges. If you blow the film with a regular hair dryer (in this case you will need an assistant), it will lie more evenly.

Selecting lamination film

The film that is used when laminating chipboard with your own hands is divided into the following categories:

• Melamine. Gives the material additional resistance to moisture and mechanical stress. Melamine film contains formaldehyde resin, which poses a health hazard.
• PVC. Polymer material that does not contain toxic substances. This significantly improves the water resistance of the base. PVC film is excellent for interior finishing work.
• Phenolic film. Compared to the two previous options, it is not very moisture resistant, but it significantly increases the wear resistance of materials.

Kitchen PVC facades - advantages and disadvantages

The kitchen facade in PVC film is a plate covered with a thin layer of polyvinyl chloride.

The advantages of film facades include:

• resistance to deformation and wear resistance;
• PVC is not afraid of moisture and moderate temperature influences;
• a wide selection of shades, coating textures and the ability to purchase a façade of any shape (curved, figured);
• lack of sensitivity to UV rays, due to which the panels do not fade or lose color;
• affordable price compared to veneered, wooden and plastic products.

Film kitchen facades also have disadvantages that you need to know about before purchasing. The first, and most unpleasant one, is that the PVC coating may peel off, especially if the cabinet is located above the hob. In addition, the film is susceptible to mechanical damage and can deteriorate when using cleaning agents with abrasive particles, and is also not subject to restoration (except for cases where it comes off).

Video material

• Is it possible to place a bed opposite the door?
• How to sell furniture active sales?
• Adhesive paper for furniture

So, to laminate chipboard at home, you will need a minimum of tools and materials, as well as an extra pair of working hands. Laminating furniture with film is quite popular; you can use it to laminate facades and tabletops. This way you can get a neatly finished surface without unevenness and air bubbles.

What is chipboard? Features of the technology

Cabinets, cabinets, kitchen sets of middle and economy classes are made from chipboards that have undergone the stage of surface lamination with decorative and protective materials at the factory. These are the so-called chipboards.

The variety of colors and textures of laminated chipboard is amazing

Cladding is one of the final stages of chipboard manufacturing. This uses:

• paper film impregnated with thermosetting synthetic resins;
• laminated paper plastic containing impregnating resin compositions.

For the production of laminated chipboards, short-cycle or conveyor belt presses are used. At temperatures up to 250°C and under the influence of a pressure of 25-30 MPa (25-30 kg/cm 2 ), a physical and chemical process occurs: the resin seems to spread over the surface, seals it and forms a durable single canvas.

The production capacities of large factories make it possible to achieve a complete imitation of the texture of wood, stone, fabric, etc. Often, for individual collections of furniture or decorative finishing works, slabs with gloss, embossing, varnished or with a 3D effect are produced.

Lamination is often understood as another process - lamination. The technologies are similar, the difference is in the fastening composition. If in the first case synthetic resins are first melted and then pressed, then in the second case gluing is used. An adhesive composition is applied to the base plate, then a thermoplastic polymer film or hardened laminate is applied and rolled. This type of coating is weaker to tear off and can swell and get wet. A laminated board is actually a single whole and practically cannot be divided into components.

The next process, similar to lamination, is veneering. Veneer is a thin section of valuable wood with a thickness of at least 2 mm. Glued with special one- or two-component adhesive compounds, the surface turns out beautiful and unique, since there are no two identical layers of wood, and it is this fact that adds attractiveness and beauty to the veneer. The coating requires care and protection from moisture and mechanical damage. HDSP can be painted, varnished, waxed, oiled or impregnated. When peeling off elements, it is recommended to use carpentry or universal adhesives.

Marketers have coined a new term - synthetic veneer. A sheet of textured paper with a decor that imitates wood pores is impregnated with urea resins and dried. Often the surface is varnished. The resulting material is called synthetic veneer, and is glued to the surface of the chipboard under pressure and at high temperature. The coating turns out to be quite hard, dense, identical to natural veneer even to the touch.

Thus, lamination is the process of “welding” paper with decor using a melt of synthetic resins. This is the most reliable and durable method of cladding chipboard. The surface is durable, resistant to elevated temperatures and water, and mechanical damage.

Advantages that will surprise

What other advantages of finishing can be highlighted:

• Environmental friendliness. Modern production technologies make it possible to produce facades from “clean” materials.
• Durability. What is this type of furniture? The basis here is MDF, and the film performs both a protective and decorative function. A quality product will last in the kitchen for many years.
• Resistance to chemical agents. Grease stains, water splashes and even difficult dirt will be easy to remove. Film facades are not afraid of cleaning with powder.
• Resistant to fading. Facades covered with film will not lose their color when exposed to sunlight.

Another advantage of such kitchen furniture is the variety of textures, colors and shades. You can choose a single-color set in a fashionable purple or pistachio tone, in a noble wood color or in a bright pink design.

And one more plus that will appeal to connoisseurs of originality: PVC film lends itself well to embossing, dyeing and other design solutions. If you need curved, shaped facades, this coating will be an excellent decorative option.

The photo below shows kitchens where the furniture facades are decorated with matte and glossy films.

In the photo: a glossy top and matte bottom - a fairly common solution.

Is it possible to laminate chipboard with your own hands?

In an attempt to save money, craftsmen are trying to carry out the chipboard lamination process on their own. If you carefully familiarize yourself with the technology and the installations used, it becomes clear that it is impossible to repeat this at home. The best option is the laminating process:

• The lining is “self-adhesive” - a dense synthetic fabric with an adhesive layer applied to the back side.
• Bonding flexible polymer film using universal adhesive. An adhesive composition is applied to the slab, a short technological break is maintained, then a layer of polymer is carefully applied and pressed with a press or carefully rolled with a roller.

When using self-adhesive film, it is enough to remove the protective paper from the back and apply the coating to the base, rub it in with a rag, plastic spatula or roll it with a rubber roller to remove air bubbles.

The second option is more reliable; in the first, the durability of the cladding is in doubt - most likely, you will have to periodically re-glue the film or replace it with a new one. Obviously, there will be no savings, so it is better to buy industrially laminated chipboard.

How to repaint laminated furniture with your own hands

The question “How to paint laminated furniture with your own hands?” worries those who have decided to update their interior and save money at the same time. And is it even possible to repaint furniture that is considered “disposable”? Furniture made from laminated MDF and chipboard is a budget option that can be easily replaced with a new one with a different color, texture and shape.

However, craftsmen easily take on the task of repainting laminated furniture with their own hands. And if you have the necessary tools and knowledge, this is not at all difficult to do.

We repaint laminated furniture with our own hands - stages of work

Stage 1 - Preparatory

The laminated surface of any furniture is plastic (polyvinyl chloride, PVC), resistant to water. If you paint such a smooth surface, the paint will not stick, even the most expensive and high-quality one. Therefore, the surface must be carefully prepared. First, you should remove all fat from the surface using special solvents and detergents.

Stage 2 - Sanding the surface

To prevent the paint from falling off after application, the top layer must be removed from the laminated surface. Sandpaper is suitable for this. First, you should use a coarser-grain sandpaper to remove the laminating layer, and then sand the furniture with a fine-grain sandpaper. This treatment will create a rough surface on which the paint will adhere better.

Do not forget to use personal respiratory protection when working, as dust from plastic is quite harmful.

Stage 3 - Sealing cracks

To seal cracks and chips, you need to use either a special composition based on epoxy resin or putty (preferably latex). Before treating cracks, they must be primed and allowed to dry. Then the cracks are sealed and the composition is also allowed to dry completely. A small spatula is used as a tool.

Stage 4 - Surface priming

Priming is a mandatory step before painting. A good quality primer will prevent the paint from peeling and bubbling. Give preference to a polyurethane-based primer; this composition sticks to everything, even glass and ceramic tiles.

If such a composition is not available, then you can purchase a primer in cans intended for painting a car. But when working in it, the presence of a respirator becomes a prerequisite. The soil must dry for at least 12 hours.

If you plan to paint the furniture in a specific color, then the primer can also be tinted in the selected shade to create some kind of “background”.

Stage 5 - Painting

Which paint to choose for laminated furniture? This is the first question that craftsmen ask before painting. Of course, it is better to give preference to special paints marked “for furniture,” but alkyd or polyurethane paints are also an excellent solution. But epoxy-based paints, although they give excellent results, take a long time to dry and stink. You can use such paints only if painting takes place somewhere in a garage or shed.

Chalk paint would be an excellent solution, especially since you can make it yourself.

To paint furniture made of laminated chipboard, you can also choose acrylic paints, but in this case you will have to prime it at least twice beforehand.

As a tool, choose a short-pile velor roller - such rollers paint much better than foam rollers and create an even layer. For hard-to-reach places, such as corners, choose brushes of different sizes (you’ll have to check which one is convenient for you - you’ll have to check it in practice).

So, you will have to paint in two layers, allowing the first layer to dry thoroughly. If suddenly for some reason something cannot be painted over, then this place can be decorated, for example, using the decoupage technique.

Stage 6 - Protection

If repainted furniture is exposed to active moisture or wear (for example, kitchen facades or furniture in the hallway), then applying varnish over the paint would be an appropriate solution. Choose acrylic varnish; both glossy and matte varnishes are available. The varnish is applied either with a brush or a roller to completely dry paint.

So, painting laminated furniture with your own hands is not difficult, especially if you know all the nuances. And after proper preparation, you will actually end up with new furniture, perhaps even better than the old one. And, what can I say, this will still help you save on buying new furniture and get a truly exclusive item.

Advantages of PVC film

• Wide range of colors and decors (glossy, matte, smooth, embossed, etc.)
• Wear resistance (resistant to mechanical and chemical stress, temperature changes or loss of color, and does not deteriorate from detergents)
• Environmental friendliness (as manufacturers claim:)

PVC film has a number of advantages, but its main advantage is that it is capable of high-quality coating of volumetric and relief surfaces of parts, in fact, which is its main task.

Laminate countertops: 4 simple and affordable ways to update their design

The countertop is by far the most visible component of a kitchen environment, fortunately or not. Some people are lucky enough to be able to chop garlic on a custom island with a marble slab as a countertop that fits perfectly into their idea of ​​an ideal interior. Others have to be content with an unsightly kitchen set from the distant 80s (or even earlier).

Due to their cheapness and durability, laminated paper-laminated plastic or chipboard countertops are very popular among homeowners, but, unfortunately, after a while they still lose their attractiveness and, in our opinion, require replacement.

Of course, purchasing and installing another countertop will cost a considerable amount. But you can try to update the old one yourself, giving it the desired look. Thin layer concreting Using special materials, you can make your old laminated countertop look new and concrete. This is a real trend of recent years, which goes well with both classic and modern interiors.

The resulting surface will be glossy and even more durable. In addition, the presence of countertops of different types and textures in one space makes the kitchen design voluminous and interesting.

Imitating painting to look like granite An amazingly high-quality imitation of a granite surface can be made using quite affordable methods. Using acrylic paints, sponge-painting techniques, and a special resin compound like Envirotex Lite, you can transform a boring, colorless tabletop into an incredibly luxurious and realistic one (using a blow torch helps increase the elasticity of the finish).

The advantage of this method is that it allows you to give the surface any color and apply grooves and spots on it, which are usually present in the structure of natural granite.

Imitating painting like natural stone To give the surface the appearance of a stone slab (which looks harder than granite), you will need the same paint, transparent glitter (that is, sparkles) and a transparent coating.

The “before” and “after” options presented here are almost the same in color, but the overall impression differs enormously. The glossy finish itself looks more professional and sophisticated. It's hard to believe that this is just a laminated countertop.

Coating with tiles If the surface is damaged quite badly or the painting option is simply not suitable for you, you can resort to another simple but effective way to update the design.

Compared to completely replacing the countertop, tiling does not seem like such an expensive undertaking. In addition, the variety of shapes and colors of this material on the market allows you to create almost any image.

The installation process, as with other surfaces, is quite simple. Just remember that to cover the side edges of the countertop you need to choose tiles with rounded chamfers.

Don’t rush to judge your old countertop, because there are many ways to bring it into perfect shape. We were pleased to tell you about the simplest and most interesting ones today.

I think that any owner of a laminated countertop will find this article useful. Sooner or later, all materials deteriorate, but we don’t know how to restore them. Thanks to the detailed description, you will be able to choose the restoration method to suit your taste and end up with a completely new item. The result looks truly exquisite.

Before reading the article, I didn’t even suspect that the countertop is almost the most noticeable component of the kitchen environment. But it’s true that our gaze often falls on her. A useful article, especially for those who want to change something. Take note.

Lamination currently saves worn-out countertops so much that I would never have thought about the simplicity and price of such a service. Of course it is easier to restore than to replace marble. The resulting view is simply stunning.

So that's it! So here's how to remodel your kitchen table! So here's how you can update your kitchen table with your own hands. Very useful article, everything turned out to be so simple. You can make beautiful tabletops with your own hands. And you don't necessarily need a stone for this. Very useful article!

Very good ideas to update an old kitchen. The countertop is the most frequently used part in the kitchen, so it wears out very quickly. Replacing an old countertop with a new and good one is not always possible, but simply updating the surface is an economical option for many.