How to hide and decorate computer wires under the table: lifehacks, devices and original design solutions

In this article we will look at how to hide computer wires under the table in an unusual, stylish, practical and interesting way.

Home computer equipment is connected to the network using a considerable number of different wires. Due to the lack of many stationary sockets, you have to supplement this rather large set with extension cords and adapters. All these wires often interfere with work, getting underfoot. As a result, the risk of breaking any of them increases several times. In addition, such a “web” does not look very aesthetically pleasing. It will be better for everyone if the wires are carefully hidden, and we will tell you in detail how to do this in this material.

Slitting process

Why bother with “disguising” the electrical wiring if you can first attach it to the main wall, and then simply plaster it on top.
The technique is called “hidden” and the sequence of actions is not always exactly the same. Most often, a team of plasterers does their job valiantly, and then they are replaced by electricians who begin to reformat the world in their own way, in accordance with the tasks assigned to them. This is strongly reminiscent of the joke about two soldiers from a construction battalion, one of whom was digging holes, and the other was burying them after him (there was no third one, who was supposed to plant trees, but an order is an order). To carry out wiring, electricians are forced to make channels for wires and holes in the plaster with a hammer drill - to punch the surface. Not everyone and not always want this burdensome procedure:

• Scoring damages existing plaster. It is extremely rare to be able to break through neat channels. And even if this can be done, the final layer of plaster in the areas of gating will still have to be restored after laying the cable. It is worth recognizing that the technique is very multi-iterative.
• Grooving is associated with increased generation of dust, which will be everywhere in the apartment. If we are not talking about the initial arrangement, but about repairs, then you will definitely have to re-glue the wallpaper and update the ceiling.
• Long-term unpleasant sound impact of a hammer drill. Even if you carry out repair work at strictly prescribed hours by law, your neighbors will still not thank you.
• The wiring turns out to be completely hidden. There will never be access to it now.

The purpose of the thesis of this section is not at all to discredit one of the most universal construction technologies that provides great opportunities (slating)

In relation to electrical wiring, I would like to emphasize that the design and aesthetic appeal of the method comes at the price of safety. Electricity is not something to joke about, and communications tend to fall into disrepair. It would be good to replace them

But if the wires in the apartment are laid in channels drilled into the wall, then you can simply forget about it. Replacing the wiring is only possible by laying a new cable and disconnecting the old one (from both ends)

It would be good to replace them. But if the wires in the apartment are laid in channels drilled into the wall, then you can simply forget about it. Replacing the wiring is only possible by laying a new cable and disconnecting the old one (at both ends).

In this regard, it would be nice, of course, to get an alternative. There is such a way - it is laying electrical cables in an open way. The features and capabilities of this path are described below.

⇡#Conclusions

To be honest, while writing the article, I couldn’t help but feel that Captain Obviousness was closely watching me - the things that were discussed in this article were too obvious. However, as practice shows, for many users some of the described techniques turn out to be a discovery, and I am sure that this material will be useful - a topic that clearly shows what the user’s system unit can look like externally and how to achieve this should be on our website. Among our (by no means all) readers there is an opinion that all these glasses, lights and other modding decorations are not needed. I hold a different opinion and, taking advantage of my official position, I declare this openly. The main thing is that in the pursuit of beauty, other components of the computer do not suffer: performance, reliability and functionality.

We would like to express our gratitude to representatives of ASUS and Corsair for the equipment provided for testing.

Useful tips

In order not to get confused when masking the wires and not to get into trouble during repairs, they must be marked in advance. This will help you immediately find the right cable later. It is better to separate low-power wiring from power wiring, without connecting it into a single bundle. Wires from the antenna and the Internet should be placed separately from others so as not to spoil the signal quality.

Cables should have the shortest possible length and the minimum number of connections: this increases their safety and reduces the risk of injury. It happens that the braid of hidden cables frays due to poor placement, so in dangerous places the wiring must be checked more often. If you need to mask wiring, you can use any ideas, especially since the range of tools and materials for decoration is now huge!

Hide wires from TV

With a TV the situation is a little more complicated, because in this case the wires are always visible. But, here are the following solutions to this situation.

First way

To hide the wires from the TV on the wall, just use the “Cable Box”, in the photo you will find an idea of ​​​​what it is.

This is the final result.

Second way

Suitable for people who do not want to make repairs. This way you can get a chic design, and the wires in this case will only highlight your interior. The method is chic, however, not everyone likes it.

As you can see, hiding wires on the wall is incredibly easy.

Third option

It is suitable only in cases where repairs are just beginning. After all, all the wires can simply be hidden behind the wall. It looks like this:

If necessary, you can stretch another wire, or get an existing one.

Fourth option

The most popular one is to hide the wires under the baseboard. In order not to be verbose, I found this video for you.

https://youtube.com/watch?v=FaTMwyWp4fA

In this way you can hide wires from: air conditioning, home theater, music center. Although it is better to hide the wire from the air conditioner in a cable channel, because running it under the baseboard is not a good idea; it will have to be removed sooner or later.

Decoration

In addition, electrical cables can be decorated, making them part of the interior. This will require a little imagination and free time. The easiest way to hide the cords is this way:

• disguise them behind a flower arrangement;
• apply silicone pads;
• use decorative panels;
• do a twist.

If you need to remove extension cords, decorative boxes are suitable. They are sold in stores or you can make them yourself. They contain all communications - cords, tees, charger.

Silicone tips

Silicone overlays to match the wallpaper or, conversely, contrasting ones can be purchased at hardware stores. Consider all the colors of the interior so that nothing stands out from the overall design of the room.

There are also sets with decorative elements - birds, flowers. And if you want to make jewelry for silicone pads yourself, then you will need available materials and time.

Plant branches

You can place a composition of indoor plants under the TV panel - the greenery will cover the wires and draw attention to itself. Crafts made from dried flowers or herbs are also a good way to disguise electrical cables.

Decorative panels

The television cord and connected cables can be hidden behind a decorative panel made of wood, plastic or metal. And the panel itself can be decorated with thick fabric, artificial flowers, branches, images of birds and animals. You can complement the composition with photo frames and indoor plants.

Twisting

If the wires are long enough, you can not hide them at all, but make a picture out of them on the wall. It can be a geometric pattern or a more complex shape.

First, use a simple pencil to outline the contours of the picture, and then lay the cords along the markings. You must first take into account their length, since they should not be overly stretched.

The problem of the aesthetics of television communications today can be solved in many ways. You can hang your TV on the wall without wires by hiding them in the walls, floor or furniture. Electric cables can also be integrated into the interior as decoration.

Due to such an abundance of options, everyone will choose the one that suits them, taking into account their personal requirements and capabilities.

Hiding with furniture

Another way to hide wires is to use furniture, both regular and special. For example, the wire from the computer can be secured under the tabletop using double-sided tape (not very secure, but easy to change position), a construction stapler or self-tapping screws. In the latter case, it is better not to drill the table itself, but to use a metal mesh or perforated screen, and then attach the wires to it with zip ties or ordinary office binders.

Use wire mesh to avoid drilling into the back of the table

The surge protector can be easily hidden in the same way by screwing it under the table or securing it to the back surface of the workplace. The wires that will go to it should be secured with thick tape or using plastic ties.

When there are few wires, you can get by with one such hole.

If the TV is on a cabinet and not hanging on the wall, then the wires can be easily hidden behind the furniture, and the accompanying equipment (for example, a TV set-top box) can be placed inside it.

Drill a hole in the TV stand to hide the wires from the router, set-top box and other peripherals

If you are just planning to buy furniture, then pay attention to tables with niches, plugs, shelves and drawers designed specifically for pulling wires. As a rule, such solutions are found in tables and cabinets designed for offices. . A plug on the table will solve the problem with wires

A plug on the table will solve the problem with wires

You can also consider a completely hidden computer installation - buy or make a table with a closed compartment for the system unit, keyboard and other peripherals.

Another option to hide wires using furniture

Organize your cable storage

Organizing them correctly will help you get rid of tangled wires. First, collect cords from phones, players, game consoles, and tablets throughout the house. Then take boxes (preferably prettier ones), place cardboard dividers inside them, label the location for each cable (so you don’t get confused later) and lay everything out neatly. To prevent the wires themselves from getting tangled, use regular cable ties.

1 / 0

iheartorganizing.com

2 / 0

iheartorganizing.com

3 / 0

iheartorganizing.com

If you don't want to deal with boxes, buy a basket and save up more toilet paper rolls.

onecrazyhouse.com

If the wires don't bother you, you can simply attach a label to each one to make it easier to distinguish between them. For example, like this:

thescoopnewspaper.com

Camouflage covers

You can make your own cover for one or several cords at the same time from plastic bags cut into long, narrow strips. A kind of “sleeve” is knitted or crocheted from them, into which all the necessary wiring is inserted. To hide an extension cord with charges in this way, a handbag of suitable size is knitted or sewn.

Some stores offer decorative collapsible plastic covers in the form of tree branches, colored tubes, and shiny snakes. This design does not have the protective properties of cable ducts, but it is acceptable to cover “ugly” wires with it. If desired, a special spiral braid can be purchased - it is flexible, has an aesthetic appearance, and allows you to hide both one element and many wires.

Installation of the junction box

There are some nuances here too. It’s worth starting with the fact that in rooms with concrete walls it is recommended to use diamond-coated drill bits, since the more common models with pobedit coating wear out quickly, and you will have to buy additional drills. They can only be used in houses with walls made of finblocks. Typically, when working with finblocks, it is prohibited to use diamond-coated crowns for the same reasons.

Before milling begins, a hole with a diameter equal to the drill is made in the center of the installation, which will make the work much less difficult. Experts recommend choosing boxes with a diameter of 6-7 cm; this will be quite enough for 6 cores. If you plan to connect several sockets in a row, the place for them is leveled.

Wiring diagram

Safe wiring cannot be achieved without prior planning in the form of a work plan.

For home use, you can get by with a handwritten plan on paper. It is enough to measure the required distances with a tape measure and put them on the drawing. But to increase reliability, knowledge of electrical circuits and experience as an electrician will be required.

If you do not have the required knowledge, you can always use the services of specialists. Most often they use Elektrik 7.8 software. It greatly simplifies wiring design. There is no charge for using the program. The specialist will quickly build and calculate complex circuits thanks to a well-thought-out algorithm. Visio is also used to design the lighting circuit.

After drawing up the project, the locations of sockets and switches are marked on the walls. It is worth considering the feasibility of such a location. In practice, you often have to give up some connection points.

How to secure wires near a desktop

If the table is installed against a wall, you can cover the hanging wires with a beautiful curtain, panel, or secure them with decorative hammocks. For an extension cord that is constantly getting in the way on the floor, a small box is suitable; it will also protect it from dust. Be sure to make several holes in it to bring the cable out.

If you are a device lover, an interesting idea for grouping wires is to install a decorative stand in the form of an electrical tower on the work surface. You can also put an unusual box on the table with holes for the output of wires, which can be easily connected to the equipment at any time. It won’t take up much space, but at the same time, it will hide the clutter and allow you to conveniently organize chargers for gadgets and headphone cables.

Is there a mess under the desk in the office? There is a solution!

Is there a mess under the desk in the office? There is a solution! You just need to call me and I'll fix everything.

Are you tired of wires that keep everyone tripping? Something always doesn't work because someone accidentally pulled it out. And the worst thing is that this horror has already lasted, as clients told me, for 3 years.

It's time to stop this, all you need to do is call the master, that is, here is the number for me

+79221642071 Nikolay

Okay, anyway, do you have a few questions, how to hide wires under the table? Yes, everything is very simple, you just need to stock up on electrical tape, plastic ties (clamps), if you have a hammer in the house or something heavy and hard, even a stone, then you can also buy small clips with nails.

And on a creative journey, my only advice is to turn off your computer or whatever you have or ask to save more often. Otherwise, when untangling the wires, you will have to disconnect something.

Here in the photo, of course, there is a more complex process of hiding the wires in an aluminum threshold, but take note.

This is what the wires look like for every personal computer user

And like this, after my arrival.

Well, I’ll tell you how to do it, everything is simple, first of all, start from the top of the whole process, from the monitor and using electrical tape or zip ties, just start collecting everything in a bun.

Just leave a spare wire under the mouse and keyboard for a moment, otherwise you won’t be able to move it or move it later. And just like that, we slowly go down to the bottom to the system unit, here I also nailed the wires to the table with brackets, they are available in any hardware store.

If you have any extra length of wire left, fold it into a bundle and wrap or tie it into your existing braid. And here in the photo it turned out absolutely gorgeous, I secured the surge protector using self-tapping screws to the table, and tied the wires in a way we already know. In my opinion, I hid these wires from the computer well, I really like it myself, and most importantly, nothing dangles under my feet and does not collect dust and food debris.

Well, I think I clearly explained to you what exactly needs to be done with the wires under the table? And even more so, the price of such a question is a penny. Here's what the things you'll need look like.

Insulating tape

Plastic ties or clamps

Cable clips on tape, you don’t even need a hammer or a screwdriver, just glued it in and stuck the wire in, an excellent option, just wipe the dust off the table, otherwise everything will fall off in half a year.

The clips for the wires with the nail will definitely not fall off.

Well, that's all, good luck to you in your creative tidying up under the table.

If you don’t want to buy or do anything, just call me in Yekaterinburg.

+79221642071 Nikolay

External camouflage

If the methods discussed above are not available for implementation, do not despair. To beautifully and wisely hide numerous cords, you can use the opposite method, which involves external camouflage. If you approach the issue wisely, numerous wires will in no way spoil the interior, but, on the contrary, will give it exclusivity and an unusual appearance.

Let's look at how to hide the wires outside. The options are as follows:

• Imitate a tree branch. You can easily decorate a computer or television cable by using it to create a small branch decorated with homemade flowers, leaves or birds. This solution will transform the interior, giving it uniqueness and brightness.
• Make a tree. If the wire is one and a half meters long or more, there is no need to cut it - it will turn into a nice “tree”. To fix the cord, special fasteners are used, with the help of which the necessary outlines are set.
• Power station. Fans of original design can imitate the supports on which the wires will be attached. This method allows you to solve two problems - make the wires invisible to the eye and create a basis for teaching your children.
• Complex drawings. If you have free time and imagination, you can hide the wires on the wall by creating an original landscape. Here the main emphasis is on the contrast between the shade of the wallpaper (paint) and the cable. Separately, it is worth considering elements that allow you to highlight the wiring.
• Fence. One of the best options is to mount the wires at the top of the baseboard. But to hide them from view, you should make wooden blanks shaped like a fence, and then secure them with double-sided tape. This method is suitable for a corridor or a child’s bedroom. For greater originality, each element of the “fence” can be painted in a different color.
• Car track. This option is the most labor-intensive, because its implementation requires time. To create a road, cardboard is used, from which the required object is cut out. Next, the paper is painted in a color that matches the interior.
• Other methods. In addition to the options listed above, wires can be hidden under door frames, behind indoor plants, under the carpet or behind furniture.

Remember that it is better to develop a plan for masking wires in advance, and then strictly adhere to it.

Lots of creative ways to hide wires are shown in this video:

Decor with stickers, stickers, improvised means

Decorative elements that help hide or neatly secure numerous cords are sold almost everywhere and are quite inexpensive. In this way you can decorate the cord coming from the sconce above the bed in the bedroom. You can decorate the cable from the TV or the cord from the heater running along the floor using a “toy” mini-fence glued to the baseboard. If you plan to carefully hide many elements behind a fence, tie clamps are used.

Decorative clamps are now sold in all electrical stores. They are an adjustable flexible clip decorated with leaves, flowers, butterflies, birds, and houses. In romantic interiors, laces are decorated with sparkles and feathers, in a children's room - with stickers depicting fairy tale characters and favorite cartoons.

Wi-Fi Almighty, or how to cover all devices with the Internet

Of course, you already have a Wi-Fi router. But whether you use it to its full potential is a question.

Use a Wi-Fi adapter

How many times have I seen this picture: I have a laptop, but the Internet works via cable. The reasons are different: some cannot find the drivers, others have a problem with the hardware. But everything can be resolved. Drivers can be selected by any computer technician with straight hands, and a burnt-out Wi-Fi module can be replaced with an external USB adapter.

A regular system unit can also be connected via Wi-Fi. To do this, you will need the same USB adapter or PCI card with external antennas.

Cover all corners

The signal from the router may go out due to improper location, microwave ovens, reinforced concrete structures and other obstacles

Therefore, please take into account the following:

• place the router in the center of the apartment (office);
• place the router at a distance of at least 1 m from the floor;
• do not place near a microwave oven;
• If your gadgets support Wi-Fi 11ac standard, use a dual-band router. It will help avoid interference when working in overloaded airwaves. This is true for apartment buildings, where almost every family has Wi-Fi.
• if the router's power is not enough, use Wi-Fi repeaters to distribute the signal evenly throughout the room.

⇡#Option two - improved

Those who periodically read “Computer of the Month” know that the assemblies offered in each issue are, let’s say, typical. Thus, the components we offer are compatible, the assembled system unit will work and have a certain level of performance and functionality. But then, if you want to change something, you will need to act on your own. For example, if you want to assemble a completely silent system, then with a high degree of probability you will have to replace the fans in the case. Or choose another, more expensive case.

The same goes for when you want a system with nicer cables. I noticed that the topic of beautiful cable management is very popular in the West, but in our country, in my opinion, it is not widespread enough. Well, we will correct the situation.

Making your system prettier is quite simple - for example, it will be enough to buy braided extension cables for the main power supply cables. It is quite possible to find them in our computer stores. A huge selection of similar products is presented on AliExpress and Computeruniverse - I’m sure you won’t have any difficulties purchasing an extension cord of the right size and color. For our black and white assembly, we purchased a simple white set for the main power supply wires (24 pin ATX, 4+4 pins EPS, 6 pins PCI-E and 8 pins PCI-E). Rubber clamps were included with the cables. I’ll note right away: the more clips, the better and more convenient, they can always be ordered separately on AliExpress, as they say, at a price of three yuan per bag.

There will be no problems connecting such extension cords.

And it seems like we slightly added to the assembly with the standard Corsair RM850x power supply, but how it has changed! As the movie character of the inimitable Yuri Yakovlev would say, what beauty, beauty!

This set of cables cost me 25 euros excluding delivery. Yes, it won’t increase FPS in games, but the main message of today’s article is precisely that not everything is measured by performance. I have repeatedly noted in my articles that we only live once. And if you want to buy a specific device, then why not treat yourself to your loved one?

Hiding wires in the wall

Laying the wire in the groove
First, using a wall chaser, after removing the remaining plaster and concrete, you need to cut a groove in the wall in which all the wires will be hidden. The wiring must be placed in a protective sheath - corrugation, which serves to protect against external adverse influences. Then the wires should be laid in the cut channels, after which the wall must be plastered.

To hide the wires in the wall, you have to break its integrity, and you often don’t want to do this, since this will damage the interior, in addition, the work is associated with dust and debris, and subsequently the wall must be reconstructed, which involves certain costs. Therefore, you can use other, more profitable methods, in which you do not need to resort to chipping the wall.

Wire on the wall

Mounted on the wall

If you have artistic taste, you can fix the wire on the wall and make a picture out of it. It is quite clear that a native, one and a half meter wire will not be enough for these purposes. Choose a suitable design and transfer its outlines to the wall, making a light-colored drawing with a simple pencil. Now you need to calculate the required amount of wire. To do this, you can attach a nylon thread to the wall so that it repeats the pattern. Then its distance can be measured. Don’t forget to add the length from the drawing to the outlet and to the source of electricity consumption - add a meter in reserve and you will get the required amount.

Wire manufacturers most often do not offer an abundance of wire colors, so you have to choose from what is available - black or white. If these colors do not suit you, then you can buy an extension cord, which can be pink or red. Don’t rush to rely on your opinion - try attaching a strip of colored fabric to the wall and you will immediately see whether the chosen color is suitable and will harmonize with the overall decor.

Decorated wire is not noticeable

If you decide to do everything simply but tastefully, then you can attach the decor to the wire or come up with your own, something original.

Alternative Methods

Wires covered with cloth

You can find a different approach - to mask the wires rather than hide them, and existing elements of the room will help in this, for example, door frames, baseboards, ceiling moldings, as well as heating risers. With the right approach to work, the laying of wires can be made almost invisible, which will have a beneficial effect on the interior of the room. Typically, low-current wires (Internet and telephone) do not cause any difficulties in laying; they can be hidden in baseboards, under metal thresholds or in platbands. When laying the power cable, a different approach is needed.

Often, all electrical communications in our time are laid using a hidden method, but due to various circumstances this installation option is impossible, for example, when, during repairs, it becomes necessary to install additional sockets or switches.

Hiding the wire in the cable channel

Cable channel
Almost always in the house there is a section of wiring that needs to be trenched into the wall or closed using a cable channel, which is a plastic box - it will protect the electrical wires from mechanical damage. The box has an attractive appearance and in this case it can be used as a decorative element. This option is also a solution to fire safety problems.

Laying the wire in the bathroom can be especially difficult when the walls and floor of the room are completely tiled. If there is a suspended ceiling in the bathroom, the wires can be hidden in it, and if this is not possible, then a cable channel will help in this situation.

⇡#Option three - advanced

I think you have noticed that, while touching on the topic of cable management, we are at the same time touching on such a computer hobby as modding. Previously, enthusiasts independently “cut out” windows in the case; now manufacturers offer such services, essentially, by default. Glass, lighting, non-trivial appearance of computer hardware - these are all echoes of the fact that people are tired of monotony, I’m sure of it.

The option presented above with the purchase of braided extension cords is relevant for non-modular power supplies, that is, for devices that have detachable cables. In the first part of the article, I already drew your attention to the fact that with the advent of cases equipped with a shutter that covers the power supply, you can safely install a non-modular power supply into the system, since a bunch of unused wires will not spoil the whole picture.

Until now, I have not deliberately touched upon the topic of modularity of modern power supplies. With a device that does not have detachable cables, everything is clear: as a rule, other things being equal, such a power supply simply costs less. There will be no problems with it during assembly - you just have to carefully fold the tail of unused cables. In the case of the Corsair Carbide SPEC-06, this is easy to do with or without a hard drive cage.

There are partially modular power supplies on sale - as a rule, among their detachable cables there are 24- and 8-pin wires connected to the motherboard. Indeed, there is no point in unfastening them, because not a single desktop PC will work without connecting these wires. But then we connect only those wires that we need: PCI-E, Molex, SATA.

With completely modular blocks the situation is much more interesting. Indeed, in some cases the ability to unfasten all the cables is very useful - I mainly encounter this need when assembling compact PCs. However, recently the complete modularity of the power supply has become its modding attribute.

Thus, the white version of the Corsair RM850x is equipped with fully braided cables. I think that the person who bought such a power supply will want to assemble the system as carefully as possible. This device is not the first, which by default is equipped with fully braided cables, and therefore we can safely talk about the next trend.

Here I would like to note that Corsair was one of the first to pay attention to modding power supplies. Sets of individually braided cables that fit many of this manufacturer's fully modular power supplies have been on sale for a long time. You can buy them in many places - for example, in the German Computeruniverse store.

I have already noted the fact that more and more cases are appearing on sale, in which all the walls are made of glass. Therefore, cable management in such devices must be approached very carefully. Here's a clever trick for you.

Let's imagine that the hero of this article - Corsair Carbide SPEC-06 - has both walls made of tempered glass. In the case of a blank metal door, we did not complicate our lives and laid the cables coming from the body along the rubber plugs. However, these wires can be easily hidden in the opening between the barrier wall and the motherboard. Naturally, this must be done before installing the motherboard, and then immediately check whether the cables are long enough to connect them. In case the length was not enough, I had a plan “B”: “roll up” all these wires in a white braid, which I bought in advance on AliExpress.

There is one more problem left to solve. Most of the Corsair Hydro Series H100i RGB PLATINUM 240 wires were hidden behind the radiator, but there was a SATA cable required for the water block backlight to work - it must be connected to the power supply. Here a 50-centimeter SATA extension cable came to my rescue, which I bought for 80 rubles. There was enough free space behind the barrier wall to carefully lay all the SATA cables along the edge and secure them with double-sided adhesive tape.

I ended up hiding most of the messy wiring. All that remains is to install the white Corsair RM850x and connect all the braided cables. The disadvantages of this power supply package include a small number of plastic clips. The drawback is not critical; I used additional clamps purchased on AliExpress (94 rubles for 12 pieces). I made four more clips myself, cutting them from steel tape and painting them with matte paint.

In the lower part of the case, as you can see, a rather large tail of wires turned out to be uncovered. It, of course, could have been pulled together into a more compact bundle, but I simply installed a perforated steel plate, bought for 60 rubles at the nearest hardware store. In my opinion, it turned out quite nice.

On the other side - even more so.

Hide a cable channel or decorative box in a cable

Using a product like this is a simple and inexpensive method to hide the wiring from the TV. You can find plastic, metal and combination types on the market. This way to hide wiring is not only stylish, but also safe. The boxes comply with fire regulations.

The main thing is to choose the right size of the material, taking into account all the cables that need to be placed in it, and also calculate the length to the outlet. This material is produced in pieces 2 m long, which must be connected with special elements (connectors, plugs, tees, corners in different directions when turning, etc.). The color of the box is selected in accordance with the wall cladding.

Decorative boxes can turn cable networks from your TV into a piece of themed wall decor.

• Lined with brick, they are suitable for decorating a room in a modern style.
• For loft, products in the form of pipes of small diameter are used.
• Those who prefer eco-style should take a closer look at wood-look options.

In addition, such an element can be easily painted to match the color of the wallpaper or decorated with wooden boards that imitate the texture and shade of wall cladding.

Cable laying rules and sequence of actions

The coaxial wire combines two functions - transmitting a signal from the receiver to the display device and protecting it from external electromagnetic radiation. To ensure the best quality signal, the antenna cable must be installed correctly to maintain these characteristics.

First of all, you need to draw up a small length diagram with a minimum number of adapters and joints. Already at this stage it is necessary to provide a method of masking, since not only the design, but also the necessary strength of the protective coating depends on this. In a private house, part of the conductor may be located on the street

Therefore, when choosing a suitable model, you should pay special attention to its density and the presence of a moisture-proof layer

Coaxial cable installation in branched systems is carried out using plugs, adders, splitters, sockets, etc. The more there are, the stronger the signal attenuation will be. To eliminate this problem, you need to choose only high-quality products.

After planning the passage of the television cable in an apartment or private house, all the necessary equipment is purchased. Then they begin installation, which starts from connecting directly to the antenna, connecting to all connection points, checking and decorating. The process requires adherence to several rules:

• It is not recommended to bend the wires and leave them where they can be easily damaged;
• the distance from electrical wiring must be at least 10 cm;
• in case of deformation of the outer shell, you need to replace the damaged area or seal it with plastic, otherwise the protective screen will begin to corrode and the signal will deteriorate;
• when laying in a groove with subsequent sealing, you need to place the conductor in the protective channel;
• if the cable length from the receiver to the decoder exceeds 40 m, you need to install a signal amplifier;
• To facilitate further maintenance, all wires must be described by attaching plastic tags to them.

Internal disguise

The best option is to hide the cables at the stage of major repairs. There are several ways here.

Conceal the wires in the wall. This technology can be used before or after wallpapering. To begin with, the paper is cut with a sharp knife, after which the edges are moved apart and fixed with needles. Next, using a puncher or manually, a groove is made for masking. After completing this work, the cable is laid in the prepared recess, and the groove is closed with alabaster or plasticine. The final stage involves applying glue to the wallpaper and fixing it in place.

How to hide wires under wallpaper is shown here:

Hide wires in the floor. There are several options here.

Conceal the wires in the floor plinth, where there is a cell for the wires. When purchasing, it is important to pay attention to the design of the product, in the central part of which there should be a special recess. It is into this that the wires are laid. This method is distinguished by its versatility and ease of execution. Hide the wiring in the groove

The principle here is the same as in the case of wall mounting

Using a hammer drill, a recess is made into which excess commutation is placed. After this, the groove is filled with cement and leveled to the floor level. Fill with cement. If the quality of the flooring in the room leaves much to be desired, you can make a new screed by hiding the wires in it. The latter must be corrugated

The principle here is the same as in the case of wall mounting. Using a hammer drill, a recess is made into which excess commutation is placed. After this, the groove is filled with cement and leveled to the floor level. Fill with cement. If the quality of the flooring in the room leaves much to be desired, you can make a new screed by hiding the wires in it. The latter should be corrugated.

https://youtube.com/watch?v=PRFIgW8aitI

Remove wiring from the ceiling. There are two options:

• Hide the wires in a plasterboard niche installed around the perimeter.
• Hide the wires in the gap between the tension fabric and the main ceiling. In the latter case, it is worth warning the craftsmen in advance about your decision, otherwise you will have to use other options.

Barsky recommends

To make your work as enjoyable as possible, approach the design of your workspace as professionally as possible. The furniture manufacturer and official distributor No. 1 in Ukraine - Barsky invites its customers to evaluate high-tech innovations in the world of office and home furniture solutions.

Adjustable tables with a solid drawer are the optimal solution for the office and home.

And so that shopping brings only joy, we offer convenient purchase options with boring for businesses and individuals. Also for our customers - free delivery and guaranteed quality of all products. For more detailed information, see the company contact department and product catalog.

How to hide wires from charging

Modern people often have to charge several devices at the same time. When they are all inserted into one “tee” or “multi-tailed” charging is used, with three to five cords for different devices, all elements are collected under one office clip and attached to any nearby surface. Some purchased options are separator boxes with four to six shaped holes through which only the “tails” of the charges come out.

A similar product can be easily made with your own hands by upgrading a simple shoe box covered with fabric and wrapped in colored paper.