Formulas for calculating the additive map for drawer guides

Preparing for furniture assembly: marking and adding chipboard with your own hands

After the furniture parts have been cut to size and all visible ends have been glued with edges, you can proceed to the stage of preparing the furniture assembly.
It consists of two parts - marking the holes and adding laminated chipboard with your own hands. This is a rather important stage, the accuracy of which determines the appearance of the furniture and the quality of the assembly. Strictly speaking, many craftsmen neglect marking and adding chipboard, preferring to use clamps and drill straight away. But this requires having several corner clamps in your arsenal and skill in handling them. Constantly pulling parts together at right angles in order to accurately drill and tighten them onto confirms, and then unscrewing them is quite labor-intensive and time-consuming. It is much more efficient to first mark the parts for fasteners, drill holes, and then assemble the furniture.

Instructions for assembling a kitchen by modules

At the stage when the parts of the headset lie in a threatening stack, you think about how not to miss and not make “spare” holes. You should pick up a tape measure and put the sketch and details of the furniture in front of your eyes. You need to learn to read details.

Namely, to highlight parts that are identical in functionality. The set consists of modules. Which have basically the same design. The structure always consists of a bottom, sides, horizons, planks and shelves. They almost always have the same additive.

Kitchen layout

First of all, using a tape measure, I arrange them by name, while not forgetting to mark each detail in the document:

1. sides of upper cabinets
2. horizons
3. bottom
4. sides of the lower cabinets
5. slats
6. boxes
7. removable shelves

Within walking distance of you, there is a service for calculating cabinet furniture.

Then, making sure that all the parts are available, I begin marking. I briefly described how to do this in this article. The topic is worthy of a separate article, subscribe to updates and you will be one of the first to receive it.

Kitchen Additive

Now I load 5k and 8k drills, and add all the parts according to separate layouts. This allows us not to make the same movements many times, assembling each module separately.

I keep checking the sketch of the headset. I try to minimize holes on visible furniture panels. If the design allows, eliminate them altogether, replacing them with decorative corners or furniture dowels.

Additive of parts made of chipboard, laminated chipboard

Additive (drilling) is the drilling of blind and through holes for connecting furniture parts to each other, using standard fasteners, as well as drilling or tapping mounting holes for installing furniture fittings or mechanisms. Neva Furniture Corporation has sufficient production capacity to provide high-quality chipboard additives. By additive, or drilling, we mean drilling various holes (through and/or blind), which provide reliable connection of various furniture parts using standard fasteners, as well as the installation of various mechanisms and/or furniture fittings. The precision of adding chipboard and laminated chipboard guarantees the highest quality of assembly, strength and durability in the use of any furniture products.

Furniture production is distinguished by a lot of nuances and features, the knowledge of which directly determines the quality, aesthetics and performance indicators of manufactured furniture. The chipboard additive is one of the most important production processes, ensuring impeccable assembly accuracy, which implies the ideal appearance and performance characteristics of the finished furniture.

These prices are valid only if the additive pitch is 32 mm. between holes (calculation from the center of the hole). If this requirement is not met, the price of filler work increases by 100%

The most common furniture fastenings

Various eccentric couplers

Corner connection

Dowel connection - classic

Features of additive work

• Typical additives are used primarily in the manufacture of cabinet furniture.
• Individual additives are used when creating products not based on standard samples. To order such work, it is necessary to provide the company with a detailed marking drawing indicating the type designations of the holes, their diameter and depth.

The perfect fit is possible!

Our company carries out professional chipboard additives on high-precision machines, so we guarantee an ideal additive for any furniture. The company’s specialists scrupulously monitor the process, minimizing the possibility of an error of even one or two tenths of a millimeter. Unconditional quality, speed and reasonable prices are the main three pillars on which the work of the Nevsky Furniture Corporation is based.

Chipboard, laminated chipboard additive

This service is necessary in several cases:

1. Assembling the product using standard fasteners. Blind or through holes are drilled into the parts.
2. Installation of furniture fittings and mechanisms. The mounting holes are drilled and tapped.

The chipboard and laminated chipboard additive itself comes in two types:

1. Typical additive.

Produced according to sketches of the entire product. Usually all drawings are provided by the customer.

1. Individual additive.

In this case, diagrams are provided for individual parts with more detailed markings and symbols.

If you do not have the necessary drawings or simply find it difficult to draw up specific diagrams, we advise you to contact the Raspilen company. Our specialists will help you draw up the necessary sketches, give some professional advice, and also solve other problems related to the addition of chipboard and laminated chipboard.

Sketch

Sketch

- this is a graphic drawing (sketch) of the appearance of the designed product, with preliminary overall dimensions, made in isometry (Wikipedia). rice. 1

rice. 1

A sketch is necessary for a general understanding and representation of the type and purpose of the proposed furniture structure. This is the first step towards realizing your plans.

To correctly draw up a sketch, it is necessary to determine the place where the designed structure (furniture) will be located. Consider ergonomics, i.e. ease of use, will it interfere with free passage, opening doors, pulling out drawers, etc. Figure 2 shows examples of typical mistakes made when designing furniture. Non-retractable drawers: a) the width of the aluminum profile of the sliding doors is not taken into account. b) the “protrusion” of the window sill is not taken into account.

Sequential stages and sizes for additive

The additive scheme consists of several successive stages. First you need to do some preparation. The working surface must be flat and free of dirt. You can place a rubber sheet, stretch film, or polyethylene foam under the door. To prevent the facade from changing position, you can use clamps. Before applying the additive, you should take care of safety precautions. It is important to wear protective gloves and goggles.

Marking

Next comes the marking. This is an important event that determines the accuracy of installation and functionality of the door. You can take a ready-made drawing of the door for the hinges or independently calculate the position of the fittings.

If you calculate the dimensions for the additive yourself, you need to rely on several rules. So you need to retreat 1.1-1.2 cm from the edge. This is an important accuracy criterion that must be observed. The first and last fasteners should be located at a distance of 7-15 cm from the sides of the doors. The number of hinges is determined by the dimensions of the facade.

Installation

After marking is completed, they proceed to drilling. It is prohibited to use high speeds when performing manipulations. The optimal amount is 1500 rpm. Otherwise, the material will begin to burn and the cutter will become dull. If a hand drill is used, the movements should be smooth and of small amplitude. This will help improve sampling efficiency.

The depth of the hole can only be controlled manually. For this reason, you need to periodically stop the drilling process to measure the depth. The optimal depth is on average 1.2 cm.

Then they move on to the simplest stage - fixing the loops. The fastener is inserted into the prepared hole. Then the bowl is leveled using a square. Places for fastening are marked with a marker. Fixation is carried out with two self-tapping screws. It is necessary to perform core punching first.

If there are minor inaccuracies, you should not pay attention to them. The permissible error is up to 1 mm.

If you have experience with additives, you can screw on the fasteners without preliminary marking. An experienced craftsman can use a square for work.

This primitive, simple additive can be done with your own hands in a quiet home environment. Mechanized work requires special equipment and skills to work with professional tools. You can make a special machine for additives yourself or purchase a cheap vertical type option. Working with such equipment will reduce time and labor costs. It will be possible to perform the additive faster and better.

Types of additives and their characteristics

The main difference between one drill and another is the type and complexity of the work performed. So, if the client is ready to independently provide his own plan for the placement of all points, this will be an individual addition, and if the holes are made according to a standard pattern, then such drilling will be considered standard.

1. When the customer specifies the locations and diameter of the holes that he needs, this work is called individual and involves clarifying several nuances, namely: the type of holes, depth and size.
2. In the production of ready-made cabinet furniture from chipboard and laminated chipboard sheets, standard drilling is more typical, when it is necessary to receive only a general drawing of the product from the client. The cost of such work is less, but the first option has its undeniable advantage: an individual additive allows you to implement much more daring design solutions in your work.

Working sketch

The next step is to draw up a working sketch. The difference between a working sketch and just a sketch is as follows. Having finally decided on the purpose and type of the future product, having specified its overall dimensions and the dimensions of the internal openings, it is necessary to make a working sketch. In the working sketch, it is necessary to take into account the thickness of the material (Fig. 3).

How and what measurements should be taken to correctly draw up a working sketch? What room features need to be taken into account? You can read all this by following the links: kitchen, wardrobe, hallway.

Thus, the working sketch should include:

a) all overall dimensions of the product

b) all dimensions of product openings

c) all thicknesses of materials of product parts

d) detailed drawings of all shaped products (radius, curved, etc.)

That's all (!). It happens that Customers forget to write down some size of the future product. And if the detailing (the next step after the working sketch) is done by us, then by coming to us with such an “incomplete” sketch, you will simply waste a lot of time.

Now about the detailing.

Furniture addition

Nowadays, many people make furniture to order, because it is much more practical than purchasing ready-made options in regular stores.

High-quality furniture additive

Custom-made furniture is assembled the way you want it to be, so everything turns out at the proper level. But it is important that the addition of the furniture is correctly designed so that no problems arise with further assembly. This is an excellent solution for those who prefer practicality and efficiency in everything.

Furniture addition

Need for use

To begin with, it is worth telling what a furniture additive is and why it is necessary to use it. This is a process during which basic holes are drilled into finished furniture so that standard fasteners can later be installed in them. This makes the assembly process as easy as possible in the future, and people do not have problems with this process. Therefore, it is important that everything is carried out exactly according to all the characteristics of standard furniture, and that everything turns out at the highest level.

We are pleased to offer our services in this process, which are in particular demand. Because our specialists are professionals who know a lot about what they do and can provide excellent results. The most important thing is that the efficiency of work has been tested over a long period of continuous work, therefore, every person is interested in cooperating with us. We find an individual approach to each project, so everything turns out to be of high quality, practical and very convenient. Our clients are satisfied, and we are glad that we can cater to your individual wishes.

High quality and reliable

Our furniture addition is a professional service that is convenient and practical to use. We are always happy to offer optimal opportunities and excellent results to ensure that every person is satisfied. At the same time, our company is a specialist with extensive experience; we have been working with orders of this type for a long period of time and always provide optimal results. We use modern materials, excellent equipment, all this helps to speed up the process of our work and at the same time achieve durability and strength. Our work is:

• Practicality;
• Efficiency;
• Durability of the result.

Entrusting the work to specialists of this type is an excellent solution for anyone who prefers reliability and practicality. You should not refuse this opportunity, because our work is also distinguished by its affordable price range. Usually, people think that using this type of service is too expensive, so they try to purchase ready-made furniture. Together with us, you can save money and arrange everything in the most attractive way, easily and simply!

Additive

• Furniture manufacture
• Cutting laminated chipboard
• Measurer services
• Design services
• Assembly services
• Delivery
• MDF facades
• Chipboard colors
• Egger chipboard
• Chipboard edges
• Milling of chipboard, laminated chipboard
• Additive

Advantages

Performs additives on furniture parts. What is this?

During the corresponding technological procedure, blind as well as through holes are drilled in furniture parts. This process is required in order to further assemble the structures with the installation of fasteners.

The process involves drilling or tapping mounting holes, which are subsequently used to install fittings and various mechanisms.

How to place an order for an additive?

• Write by email or
• Submit your application online

Production address: St. Petersburg, st. Kirishskaya, 2a Opening hours: 10-18 (weekdays, no lunch)

Furniture additive: types

There are 2 types of additive services:

• Its typical variant is when the process is carried out on the basis of sketches of products provided by the client;
• Individual additive - when the customer’s drawings are used for each part, the marking dimensions are applied, and all the necessary holes are marked.

A typical additive is used for the manufacture of cabinet furniture frames. To order the appropriate service, you will only need a dimensional and assembly sketch with notes on the desired types of fasteners and their location.

The second type of additive is possible only if the client has a sketch for each part being added with markings indicating the type of hole, its diameter, and depth.

Why is an additive needed?

Any modern furniture requires the presence of fasteners and fittings. Both elements require additives. Without it, it will simply be impossible to assemble furniture. But the procedure must be performed at a high-quality level, for which special machines are used that make holes with an accuracy of 0.1 mm. Poor quality of the additive will lead to sad results - you won’t be able to assemble beautiful furniture. Petrostil LLC, having the necessary equipment and a staff of qualified craftsmen, guarantees that the additive will be performed at the highest quality level.

Limited Liability Company Petrostil LLC 195299, St. Petersburg, Kirishskaya st., 2-a

vote

Article rating

The New View furniture factory has been providing services in Krasnodar for more than four years:

• Cutting laminated chipboard. (we will bring it to our workshop and cut the chipboard without chips from any base in Krasnodar)
• Edged chipboard. (we will finish with high-quality edges using any of your or our edges)
• Additive for laminated chipboard (we add kitchens, cabinets, any cabinet furniture)
• Furniture assembly. (we can assemble Kitchens, Wardrobes, Sliding Doors, Cabinet Furniture)

Our ten advantages:

1. We draw up cutting maps (you only give us the dimensions of the parts indicating where to cut)
2. We do the detailing from your drawing (we only need a drawing with the general dimensions of the furniture from you)
3. We assemble Kitchens (with your or our fittings and facades)
4. We assemble compartment doors (all components are yours or ours)
5. Delivery of material to the workshop (we can purchase chipboard, edges, fittings, etc.)
6. Loading and Unloading in the workshop (takes place in a warm and covered room)
7. Production takes 2-3 days on average (we don’t charge for urgency)
8. High-quality cutting and edging (always sharpened saws, chipboard without chips)
9. Eco leather sticker, chipboard gluing, production and edging of any radii
10. Reasonable prices for all types of work