DIY podium bed: step-by-step instructions, drawings and dimensions

Building a podium is a controversial decision for a nursery. On the one hand, the presence of an elevation in a room opens up wide possibilities for organizing space. On the other hand, such a design is considered unsafe for an active baby, as it can cause injuries.

If you decide to design a children's room with a podium, try to make it as safe and functional as possible. How to put this into practice? This will be discussed below.

How to assemble a support frame

1. First, horizontal load-bearing bars measuring 47 by 27 millimeters must be attached to the side of the headboard, side block and back section.
2. After this, the support bars should be installed. They are the ones who will bear the entire load. These parts must be arranged so that there are three bars on the back and the same number on the head of the bed. One block should be in the center and two at the edges. The remaining two will be needed for the side block. They are placed quite close to each other near the central section.
3. Next, on the previously installed load-bearing bars you need to cut grooves that will be intended for the central crossbar. Do not forget to pre-drill holes for screws with a diameter of 4.5 millimeters.
4. Next, screw the T-shaped stops tightly. They are needed to maintain the parallel front slats in a normal position. The fasteners are inserted from the side of the drawers.

DIY podium bed: photo

What are the advantages and disadvantages of a bed with a podium

The design with a podium allows you to bring some zest to the interior. This is an ideal solution for those who are tired of boring and familiar designs. Many different styling options allow you to realize even the most daring ideas.

Such a design solution can change the atmosphere.

Among other advantages of the design, the following should be highlighted:

• Zoning. Dividing into zones allows you to show the room in a favorable light. This solution makes it possible to transform the room beyond recognition and visually expand the space. This is achieved due to the absence of clear boundaries and contours. The bed on the podium becomes an organic part of the design, so it does not cause any feeling of discomfort. All details stand out naturally.
• Practicality. Such a product significantly enlivens the entire interior of the apartment and brings some zest. This increases the useful storage space. The area in the podium can be equipped with a cabinet, which will significantly reduce the need to purchase large-sized furniture from the installation. This space can be equipped differently. Often, the retractable base of the podium allows you to hide communication lines that do not fit well with the overall style idea in the apartment. You can install the structure yourself. This is not difficult if you have all the necessary materials and tools for the job.
• Space saving. The design allows you to significantly save space. For example, you can advantageously divide an area for receiving guests and for children to play. This solution looks good in the bedroom, children's room, and living room.
• Design. Externally the room is transformed. The podium bed gives an unusual appearance, attractiveness, and sophistication. This is the best option for anyone who wants something new and original.

A podium bed creates visual boundaries and naturally breaks up an open space.

In this case, you should pay attention to some design flaws that may interfere with the installation. When choosing, you should take into account the fairly large sizes of the podium

This creates some inconvenience and brings unnecessary hassle to the lives of apartment owners. This drawback significantly limits design options in old-type apartments with low ceilings.

Thanks to such a product, it is possible not only to bring newness to the interior, but also to use the podium as functionally as possible to store things.

Among the disadvantages, cumbersomeness should be noted. The structure is difficult to dismantle or move if necessary. Extensive reinstallation work will be required. Also, it is quite difficult to sit on such beds and then get up. This is bad for older people who have joint problems. In all other cases, using beds on the podium is convenient and profitable.

If you have ready-made parts, the structure can be easily assembled with your own hands.

Small apartment: you definitely need a podium

Is it possible to make a podium in a small apartment? Installing flooring with a modest area requires a balanced approach.

Khrushchev apartments have low ceilings and small rooms. Because of this, a limitation is imposed not only on the area of ​​the podium, but also on its height. To prevent the room from seeming even smaller and the ceilings lower, it should be low.

In small apartments it is better to make the podium low

If a low podium does not solve the problems with arranging a sleeping area and the multifunctional use of the flooring itself, then it is better to abandon the idea. This also applies to rooms in which there is an excess of furniture.

Even a small apartment can look very modern with a multifunctional interior. In this case, pieces of furniture combine several functions, move, change position and purpose.

Drawers and shelves for books at the ends will be a good way out. To save space, cabinets and drawers can be located not only under the podium panel, but also on the sides.

Storage boxes are a great space saver

The presence of a sloping ceiling is not in itself a contraindication to installing a podium.

Should I order it or make it myself?

Models with a podium will definitely attract the attention of everyone entering the room

Therefore, it is important to make all the design reliably, highly durable and beautiful.

You can make a simple traditional podium without retractable or opening structures with your own hands if you have tools, high-quality materials and minimal experience in performing this type of work. In this case, the required amount of material must be clearly calculated, drawings must be made and calculations made.

Having no experience in work, it is better to trust the specialists

If there are neither appropriate qualifications for such work, nor sufficient free time, the work can be entrusted to professionals. This also applies to complex systems with opening doors, pull-out drawers and roll-out mechanisms.

How to make a podium bed with drawers?

This model makes it possible to create a large and comfortable storage system. This design can be placed in any corner of the room.

The drawing gives a general idea of ​​the relationships between elements. It can always be modified to suit your needs.

Manufacturing

The manufacturing process of this model begins with:

1. Structural design. The drawing should indicate the dimensions of the frame, headboard, size of sides, number and location of drawers.
2. Next, we begin assembling the podium. This design will consist of 3 parts. The side block must be attached to the backrest at an angle of 90 degrees. The central block will divide the product into two equal parts. If you want to build a collapsible structure, then the headboard is fixed with standard bolts or nuts.
3. Next, blocks are assembled from the timber. Holes for fasteners are drilled in the parts. The joints must be additionally coated with glue and secured with clamps.
4. Now we attach the central block to the bed structure. It is secured with four spacer elements. In this case, the top panel must be recessed deep into the structure.
5. Now you can move on to constructing a frame for the mattress. Supporting bars are attached along the entire perimeter using screws. To give the product strength and reliability, the joints are coated with glue.
6. Next, support bars are installed that will take on the entire load. On them we lay the base of the bed, assembled from OSB sheets or slats.
7. The final touch will be installing the sides.

Finishing

The finishing of this model is practically no different from the one described above.
If the podium bed was made of wood, then the elements are sanded, treated with an antiseptic, and covered with stain and varnish. The ideal option for decorating facades would be to order ready-made elements from a furniture company. They can be made from different materials, but it is better to give preference to plastic or MDF.

As for the design of facades, their surface can be glossy, matte with ornaments and patterns, with an interesting texture. In other words, use your imagination, but at the same time take into account the overall interior of the bedroom.

Advice: if you are serious about saving space in your apartment, try making a bed-wardrobe, a bed-chair or a lift-up bed. You may also be interested in a wardrobe or beds made of timber, solid wood, chipboard, pallets and boards.

How to choose a mattress

The comfort of the sleeping place on the podium is regulated thanks to the properties of the selected mattress. Its dimensions depend on your wishes. The podium should extend 20-30 cm beyond the area allocated for the sleeping area. It is strongly recommended to buy orthopedic mattresses, since the surface of the podium does not have any special anatomical properties.

To purchase a mattress you will have to consider:

Hardness level

For people weighing more than 100 kg, a mattress with a reinforced spring block (F3) is recommended; in the case of a standard body build, a medium-hard product (F2) is suitable; for those weighing up to 60 kg, you should pay attention to a soft spring block. Age. People under 25 years old should buy springless hard mattresses filled with coconut coir.

For people over 25 years old, a mattress with an independent spring block will be suitable. Upholstery option. The best solution would be covers made of natural fabrics (cotton, jacquard) with mesh-shaped ventilation holes on the sides.

A high-quality mattress will allow you to properly distribute your weight. In a lying position, the shoulders and hips should “sink”, and the mattress should support the lower back, cervical region and legs.

Types of single bed designs

A single bed is a versatile and compact sleeping option. They are usually used in small spaces or children's rooms. Its main advantage is that it does not take up much space. Plus, the bed may have a lifting mechanism or drawers that will allow you to use the space under it for things.

There are also transformable beds. Such structures can be folded, which also frees up space in the room. There are a great many types of single beds. For example, cribs. They are selected primarily based on the child’s age.

If he is just getting used to sleeping alone, then it is better to pay attention to low cribs with sides on the sides

A bed with a side will look interesting in the room.

Such models are made of wood so that the baby does not get injured on metal slats or corners. For older children, you can already consider options without sides. It is better to stick to the same wooden design, since even older children are very active and love to play in their room, and a metal product will be more dangerous.

Metal beds are quite dangerous.

There are the following types of single beds for adults:

1. Standard version with headboard.
2. Sofa-Ottoman is a low bed that can be supplemented with armrests or a backrest.
3. Transformer is a multifunctional model that combines a bed with a table or wardrobe).
4. Retractable. It is placed on a podium and installed only in rooms with high ceilings.
5. Folding. Fixed in the wall.

Today there are many types of beds.

Each type is selected taking into account the size of the room and the style of the room. The standard version or Ottoman can be placed almost anywhere, but the folding version is ideal for narrow but long rooms

If we consider the style of the room, then the type of bed can be any, but its design or decoration needs to be given special attention

Create a drawing

Drawings of the podium bed are drawn up based on exact measurements of the room and the planned dimensions of the mattress. Small rooms are simply covered with a podium into parts with different heights; in other cases, the length of the bed (as well as the dimensions of the drawer with the sleeping bed) is adjusted to the mattress.

The width of the furniture varies from 1.2 to 1.5 m for children’s models, 1.7–1.9 m for double models. The height of models with drawers of any type varies between 40–70 cm.

Deviations in the smaller direction are not recommended; in the larger direction, they are permissible when installing the bed in a room with high ceilings and strengthening the strength of the frame.

Detailed sketches of beds are made on paper or electronically, using online editors or furniture design programs. If you lack experience, you should use ready-made drawings, scrupulously observing the specified indents and gaps. It is also very important to purchase materials of a given thickness.

If it is necessary to change the length or width of the frame, the dimensions of the retractable elements and external facades are simultaneously adjusted.

The intervals between adjacent boxes and the specified gaps must remain unchanged. In particular, the width of the drawer placed under the bed in any case should be 2.5 cm less than the box itself, and the minimum permissible distance from the bottom to the floor is 1 cm.

Photos in the interior

In addition to the fact that a podium bed becomes an excellent decoration for any interior, due to proper placement it can zone the space and improve its ergonomics.

Examples for a studio apartment

Installing a podium bed is one way to delimit a studio. If you build a structure near a window, the podium can be equipped with a work area or a place to relax, and a roll-out bed can be placed inside it. This solution allows you to equip a small studio with two full-sized beds or one large double bed.

The photo shows a podium bed in a niche in the design of a studio apartment.

Bed on a podium in the interior of a children's room

Both a classic stationary design and a podium with a pull-out bed, additional drawers or shelves are suitable.

The advantage of a roll-out bed is that it really saves square meters and provides the opportunity to organize other areas in the room, such as a study area. In addition, built-in beds are very convenient for the bedroom of two children.

Vertically retractable single models are placed on the right and left sides at the bottom of the podium, steps are installed in the middle, and a work area is organized on top of the structure. During the day, the beds can easily be moved inside and provide free space for games.

In the photo there is a children's room with a podium bed with two sleeping places.

Bedroom with a podium under the bed

If there is a shortage of usable space, a model with a retractable sleeping bed would be an excellent option. The podium under the bed can also serve as a closet and help solve the problem of storing bed linen and other things.

If the ceiling in the bedroom is high enough, it is possible to install a bed on a podium up to 1 m high, which will act as a full-fledged wardrobe.

In the photo there is a white podium bed in the interior of the bedroom.

Podium bed in the living room

In a one-room apartment, where the living room is also a bedroom, a roll-out bed disguised in a podium is a winning design idea. This design is also suitable for those who like to receive guests and need additional sleeping space.

The podium bed can be used as a sofa. To do this, you just need to pull out the sleeping place halfway and decorate it with pillows. In this way, you will not only save space, but also refuse to buy standard upholstered furniture.

The steps of the podium design are equipped with drawers, cabinets or roll-out coffee tables. The end parts of the product often have niches in which books, magazines or discs are stored.

The photo shows the design of a modern living room with a podium structure, equipped with a roll-out sleeping bed.

Podium bed under the kitchen

A podium with a retractable bed on which a working kitchen segment is arranged helps to zone and optimize the space.

However, in this case, it is important to correctly distribute the uniform load on the podium structure and ensure that materials that are resistant to humidity and temperature changes are used in its manufacture. You should also ensure proper waterproofing of the area under which the sleeping bed is located.

Ideas for a balcony or loggia

A comfortable sleeping area will be organized on the territory of the insulated loggia or balcony. It is quite possible to assemble such a podium yourself. To do this, you need to accurately measure the balcony space, prepare all the necessary materials and tools. Chipboard sheets, plywood, wooden beams, furniture panels and metal corners are used to form the frame. After the podium is erected, it is replaced with a soft mattress instead of a bed and turned into a place for relaxation.

The photo shows a podium bed with shelves on the loggia.

Prices

The price of podium beds depends on several factors, each of which should be taken into account.

• Size - it is clear that the larger the area and height of the structure, the higher the final cost of the product. Not only the consumption of materials matters, but also the reinforcement of the frame. If for a simple low structure a wooden beam is sufficient, then a high podium is built on a metal frame.
• Material - chipboard, fibreboard, solid wood, respectively, provides a different order of prices.
• The correct geometric shape in all cases costs less than a curved complex contour.
• Design - a pull-out bed will cost more than a box due to the complexity of the device and material. The more devices that need to be installed into the podium, the higher its cost.
• The company's rating, distance from the warehouse, installation conditions will also affect costs in one way or another.

Structures with an area of ​​6 square meters. m. and with one podium bed you can buy no less than 35 thousand rubles. A podium for boxes with a lower height - at least 30 thousand rubles. Products are assembled depending on complexity within 2–4 days.

In order to save money and if you have the appropriate experience, you can try to make a podium bed yourself.

DIY podium

If you want to make an elevation in the bedroom with your own hands, you need to make several important calculations:

• calculate (at least approximately) the pressure on the floors;
• calculate the pressure on the podium itself.

On average, in an apartment the pressure on the floors will be 400-600 kg. per square meter, and the pressure on the podium itself will be 200-300 kg. per square meter.

First of all, you should prepare the area for the future podium and remove the flooring at the installation site. The next step is to install the elevation frame. Mount the bars at right angles to each other, and then fix them with screws or nails. Metal corners can also be used to securely fasten the podium elements.

If the podium does not have niches or storage systems, fill the internal space with foam plastic or mineral wool: this way you will be able to avoid the booming sound that may subsequently appear when walking on the surface of the podium. After the frame is made, you can begin covering it with plywood or other sheet materials. To do this, holes of a certain size are drilled in the beams and in sheets of plywood, into which fasteners are then inserted. Once you have finished covering the frame, you can begin laying the flooring of your choice.

Regardless of what kind of podium you make, solid (monolithic) or framed, be sure to use a laser or water level. Mark lines on the walls - they will indicate the upper boundaries of the future structure.

Decorative podium

How to make a frame for a decorative podium with unusual lines and shapes? If you want to make, for example, a border in the form of a wavy line, draw this line on the floor, and then place the bars along it. They should be located vertically, about fifty centimeters from each other.

The height of the beams is the height of your future decorative structure. This way the decorative, complex side of the podium is completed - and the rest of the frame can be made in the usual way. Boards should be installed on the vertical beams, which also bend and take the shape you need. Of course, these boards will be thin - after all, it is difficult, if not almost impossible, to bend dense boards.

How to complement and decorate the podium?

In order for your podium to be beautiful and functional, provide drawers in the frame for storing things (for example, bed linen, etc.), and also install electrical wiring. If you place several lamps on the decorative side of the podium, the effect will be amazing, especially in the evening and at night. The wiring runs inside the frame using a special corrugation.

As for storage systems, you can use either one large box or many small boxes where you can place absolutely any things you need. For example, a structure made on a wooden frame can replace a fairly large wardrobe or chest of drawers.

Creating a stylish and comfortable podium is quite a complex and responsible matter. Of course, implementing such a design in the bedroom yourself is only possible if you have certain skills in construction and repair. But if you doubt your abilities, you should entrust such work to a professional. A reliably and high-quality podium is a real decoration of your bedroom. This is exactly the detail that will make the room spectacular, bright and individual!

Design and decoration

The design of the podium depends on its size and, to some extent, on the style of the room. Visually, it is perceived as part of the floor or a piece of furniture, so it rarely becomes a color accent - the shape is more important here.

• A small podium for one roll-out bed is not so much a zone as it is a piece of furniture. Its color and contours should be close to the color and appearance of the rest of the children's furniture: light wood, chipboard or MDF with colored acrylic facades.
• The elevation with drawers is also not a zone, but a large bed and is decorated to match the color and style of children's furniture. Various decorative techniques are used.

For example, in a nautical-style room, the podium is painted blue, and fences imitating deck railings are fixed.

Children's bed-podium (photo)

In a nursery for small children, regardless of gender, it is recommended to install a canopy or curtains to separate the bedroom area from the play area.

A large podium provides more opportunities.

• The color palette is based on the floor covering. It is not recommended to use the same material: the zone has already been selected, so it should also be different in color. As a rule, matching shades are selected. But if the room is decorated brightly, in the style of nature and travel, for example, then the elevation can also be painted in a bright color: green, turquoise, a combination of green and gold, and so on.
• If the podium is made of solid wood, it’s not a bad idea to leave it in its natural form, sanded and varnished, of course.
• The shape is traditionally a square or rectangle, occupying the entire space from wall to wall. However, the structure can be angular and only touch two walls. In this case, you can install a wardrobe or a rack with open shelves as a third “wall”.
• The curved podium looks very nice. It is more difficult to choose a pull-out bed, but the effect is worth it.
• Partitions – it is necessary to fence off an area, play or sleeping, while the child is still small. You can install stationary railings or use baby gates. Also used as a partition, but for older children, is a shelving unit or chest of drawers with drawers that slide out in both directions.

Types of designs

There are a large number of different types of installations, which differ not only in external, but also in design features. They are assembled in different ways and consist of a large number of different parts and elements for assembly.

Frame traditional podium

The most common options due to their lightness and a large variety of different stylistic solutions. Made from lightweight wooden sheets. Some models are made of high-strength steel. Such materials allow you to create a structure yourself if you buy all the necessary materials.

Each version of the podium bed has individual design features that allow you to choose the right model.

There are many different models available on the modern market, which allows you to choose the best option for everyone. Such products are the best solution for decorating a children's room.

Pull-out design with drawers

This is a fairly common type of installation. The beds are installed on a pull-out base. They can be removed at any time to free up space in the room. This solution is common in small apartments and private houses.

Due to the retractable bed, the podium can be used as usefully as a relaxation area with a sofa, a gaming or work segment.

You can store any things on top of the podium. This place can be equipped as a work or play area, depending on the purpose of the room.

With monolithic base

Large and massive structures with high strength and durability. An entire section of living space is used as the base of the structure. After selecting a location, a frame is installed and filled with concrete. After drying, the base is covered with the material from which the floor covering is made.

This model is distinguished by a solid podium, which mainly performs decorative functions.

The bed frame and the bed itself are installed on top. This installation will last for many years due to its manufacturing from reliable materials. The main disadvantage is the lack of mobility. There is no possibility to move the structure if desired.

Installation Features: 7 Important Recommendations

When ordering a podium bed or installing the structure yourself, you need to take into account the features of such an interior solution:

If the podium includes not only a sleeping area, but also a passage area, it must have sufficient sound insulation. The non-standard curved shape of the top shield of the podium should have a frame of the same shape. Structural strength is more important than saving materials. When choosing a place to install a podium structure, try to place it in the same place where a regular bed would look natural. If the podium is technical, hiding communications, it is important to maintain access to them. Otherwise, you will have to disassemble the entire structure to repair the cable or fix a water leak. When ordering a concrete podium, a careful calculation of the load on the building’s floors should be carried out

Therefore, it is recommended for private houses and first floors. The podium should not block the passages or clutter up the space.

We do not close the passages in the room

Types of such beds

Podium beds vary in:

• frame material - wood or metal;
• shape - rectangular, square, semicircular, asymmetrical;
• dimensions - average width - 80-120 cm, length - 185-220 cm;
• height - usually 40-75 cm;
• functionality - the presence of additional sections for storage, folding tabletops, etc.

For creative, creative people who welcome everything new and unusual in design, this is a great opportunity to add some zest to a familiar interior.

The main thing is to take care of the reliability of the retractable mechanism and the strength of the frame, since regular everyday use requires greater wear resistance.

Types of structures

According to their design features, podiums with a bed are distinguished:

• strictly functional - their base allows you to hide defects in the designed space and communications. Usually has several storage drawers;
• decorative - decorate the room, create the necessary accent, zone the space;
• combined options - combine both types.

In order to roll out the bed, there must be free space.

The following types of structures are also distinguished:

• with a monolithic podium - the “box” itself is made in one piece, it is strong, durable, looks solid, has a lot of weight, and is suitable for installation in a private home;
• with a frame base - traditional frame construction. Here the bed is placed on top of the podium. This bed decorates the interior; it is lower than other models, usually does not have storage systems, but is complemented by bedside shelves and a luxurious headboard;
• combined (multifunctional) - this structure contains a spacious storage system, many shelves, drawers, niches, which allows you to replace an entire chest of drawers or cabinet. The storage compartments are camouflaged and are made from several sides. The platform here is high and voluminous - there are steps for it;
• retractable – functional, practical, this is the best option for cramped rooms. The sleeping place hides in the podium and extends on rollers. A work or play area or another full-fledged bed is placed on top;
• mobile – is a platform with storage systems. At night they put a mattress and bedding on it, during the day they clean it, using the space for other purposes;
• balcony type - placed in the space of an insulated balcony, loggia. It is smaller in size than a room bed and has storage systems;
• round - looks impressive, luxurious, but is only suitable for a spacious square-shaped room. The bed will become the “semantic center” of the room; it is usually placed in the center, in a niche or in a corner, complemented by a soft headboard and several shelves;
• with built-in lighting - an original idea for decorating a podium, creating the effect of a bed “floating” in the air. An LED strip is mounted along the platform cover, under its steps, and multiple storage sections are placed inside.

Types of structures by organization

There are many models of raised decking with a bed. All of them are divided into three main types:

• Traditional.
• Improved.
• Retractable.

Creates more space

The choice of a specific type of structure should take into account:

• visual image;
• financial opportunities;
• room style;
• the need to install additional work and sleeping places;
• room parameters (ceiling height, area, regular or irregular shape, arches, ceiling beams).

There is no clear opinion about the podium bed even among designers. Many are confident in the advisability of such an organization only for very large premises. But not everything in this matter is clear. It is possible to install it even in a modest-sized apartment with a not very favorable layout.

Be sure to consider the style of the room

The frame version has a relatively simple organization. It uses metal, wood or a combination of several materials.

The average height of the podium in an ordinary apartment is from 0.25 to 0.55 m. If you need to organize storage systems, then the height should be about half a meter.

Often the podium has a rectangular shape. But this requirement is not considered mandatory. The round, semicircular shape also looks no less interesting.

It is basically rectangular in shape

The podium usually has a completely flat top floor. But perhaps even a wide mattress can be placed in the recess below the sides. This will make it possible to use the protruding planes as bedside tables and additional shelves.

Traditional podium

This type is the simplest to implement. It looks like a rigid frame made of wood with a covering of wear-resistant material and a mattress on top. The height of the flooring is usually about half a meter.

The casing is made from the following materials:

• linoleum;
• skin;
• wood;
• carpet, etc.

Traditional podium option

One of the easiest ways to decorate the outside of the podium is to paint it in several layers. The right shade will create a harmonious space in the room, where each element has its place.

Improved version

This type of bed is similar to the previous one, but with added functionality. The podium has retractable storage chambers for things: for bed linen, clothes, etc.

The decorative and originality of the structure is combined with practicality of use. Storage systems in the form of drawers can be combined with open shelves for books, souvenirs, frequently used small items, and blankets. A system of entire segments with different appearances is welcome.

The option is supplemented with functionality

Retractable mechanism

A bed with a pull-out system is a comfortable sleeping place that can be pushed under the podium. The roll-out device allows you to use the resulting free podium for organizing a workplace or storing things.

In withdrawable systems, it is necessary to pay attention to the quietness of the drawout. To do this, the wheels must have a high-quality rubber coating that does not scratch the floor and makes it possible to move the bed out and in quietly

Plastic wheels are not suitable. If used frequently, they may leave marks on the floor. In addition, plastic has a short service life and quickly becomes unusable.

Pay attention to the quietness of the withdrawable mechanism

Nuances and important design points

One of the most important nuances is the choice of material for the structure. We have 4 choices:

Wood. If we decide to create a house structure with our own hands, we should focus on this material. Wood is easy to cut and process. But it is recommended to choose hard wood, and take care of protection from moisture in advance. Screws and bolts are suitable as fastening parts. The strength of a wooden bed will depend on the quality of the chosen material, fastenings, and correct assembly. Metal. Processing is several times more difficult, since it requires the use of a welding machine. You can use only bolts as fastenings, but this is only suitable if welding is not possible

You need to pay special attention to the fastening parts, since they break most often. The material itself is very durable

A combination of bolting and welding can also be used to allow the structure to be disassembled if it needs to be moved. Combination of materials. We can use both wood and metal. This will make assembly work easier, and the weight of some structural parts will be lower. You can use strong metal to create fastenings and places that need to be made strong. And wood is suitable for parts that are difficult to process. This will solve all the problems that arise during assembly. Sheet materials (MDF, plywood and fiberboard). With their help, the place to lie can be made as flat as possible. In addition, they are suitable for creating additional devices (bedside tables and shelves next to the bed). We need polyurethane foam or foam rubber to create soft areas of the bed.

We suggest you familiarize yourself with Withdrawing money from an LLC through your own individual entrepreneur

What is a podium bed and what are its functions?

A podium bed is a sleeping place located either on a rectangular platform rising above the floor level, or hidden in the platform itself. The height can vary, from a few millimeters to tens of centimeters. Low platforms serve two functions:

• Aesthetic.
• Zoning.

A low podium zones the room and looks aesthetically pleasing.

In both cases, the visual perception of the interior space changes.

Higher podiums may add the following features:

• Storage. The platforms are equipped with hidden niches, drawers, built-in cabinets, and shelves. The bed itself can “hide” in the area.
• "Disguise" of communications.
• Correction of room configuration deficiencies.

A high podium can perform many more functions.

Drawings, dimensions, diagrams and projects (+ sketches)

When calculating the dimensions of a future structure, it is taken into account how many people will sleep on it, their height, weight, and the availability of free space in the room. For a children's or teenage bed, the size of the structure is 70 by 160 cm, for an adult – 80 by 190 cm, for two – 150 by 200 cm, the “king” version – 220 by 240 cm. For particularly “obese” residents, weight from 150 kg, the frame will require additional strengthening.

The podium visually and practically separates the sleeping area, which is especially important for one-room apartments and studios.

Podium beds come in different designs. Luxurious upholstery, multiple draperies are suitable for a classic style, rough untreated boards are suitable for a rustic style. A platform decorated with shiny metal elements is suitable for high-tech, a low one, decorated with small pillows - for Japanese. In a minimalist, modern interior, the crib is hidden in the podium, like all storage spaces - in the room, at the same time, there is nothing else.

Podium: development stages

An ideal children's room with a podium and pull-out beds can be built with your own hands, therefore, preparation is needed for such a procedure.

Adults need to provide a children's bedroom with a similar design with the most necessary accessories; the interior will be completed with the presence of curtains and other textile elements.

It will also be easier for you to form your vision of space.