Master class: do-it-yourself soft headboard for a bed

Hello everyone, dear friends! Today we’ll talk to you about a soft headboard for a bed with your own hands. To be more precise, I’ll tell you about 3 ways to make it yourself.

Two methods are quite simple, and the third requires certain skills and abilities. One mistake can completely affect the entire product, it will have to be made again or the idea will be abandoned altogether.

Each master class presented is very popular, there are many photos and videos about them. It is not surprising that in most cases the headboard is made according to one of these schemes.

Let's tell you how to make a beautiful and practical headboard yourself at home, what you will need to buy for this, and how to make a step-by-step important element of any bed.

Upholstered headboard - a new design for your bedroom

This element is made by hand if there is a desire to update the bed. The structure must be stationary, rigidly fixed, and ensure reliability and safety. If you are deciding how to make a headboard for a bed with your own hands, consider different upholstery options. The dimensions of the structure are determined in accordance with personal preferences. So, the headboard is made in two versions:

1. wider than the bed, and depending on the size of the room, the length of the protrusions on both sides can be significant or small;
2. the headboard matches the width of the bed.

The height can be any. The standard value of this parameter is 39 cm. However, in most cases this element is made taller. When decorating, different ideas are used, but the headboard of the bed must simultaneously fit into the interior of the room and be in harmony with the design of the piece of furniture. The determining criteria are:

• upholstery colors;
• presence/absence of a pattern;
• screed method.

All these points should be thought through before starting to manufacture the structure, since it is not always possible to change the headboard of the bed. This is the main reason why you need to consider options that can be easily repaired, because this part of the piece of furniture wears out quickly.

First check if it's a real mattress

You may have an old or incompatible box or frame spring, so be sure to check this before you embark on your how to harden a soft mattress journey. You can test this by placing the mattress on the floor and sleeping that way for one or two nights. If you have been able to improve your sleep quality and notice that it has actually made your mattress firmer, you should consider the following options:

• Get a new box spring/frame
• Insert a plywood board between the mattress and frame to add support.
• Leave the mattress on the floor

The quickest solution here is to just leave it on the floor until you figure out what to do next.

Where can I place it?

Beds with soft headboards are often placed in niches or alcoves. In this case, the backrest becomes a high soundproofing shield, preventing the passage of waves both from the bedroom and from the outside. Art Nouveau headboards can play the role of a screen if the bed is located near a window or in the corner of the room. Such a screen or shield will create a safe and comfortable corner, protecting the sleeper from drafts, prying eyes and bright sunlight if the room is on the east or southeast side.

If the location of the room allows you to install the bed exclusively next to the door, which is not very good, then choose an English-style headboard with “ears” covering the sides of the bed. When installed in a corner or near a window, arched structures are suitable, which will smooth out the lines and beautifully limit the space of the sleeping place. In this case, the headboard can be wider than the bed, creating a massive and reliable screen.

Master class headboard in the form of soft squares

It’s easiest to make a soft headboard with your own hands in the form of individual squares. Even a beginner can cope with this process.

The production of the backrest begins with measurements. The width of the product should correspond to the width of the bed or slightly exceed it. The height is determined taking into account individual preferences and the desired effect.

Let's consider the stages of creating a headboard from 18 squares, arranged in 3 rows of 6 pieces (the size of each depends on the dimensions of the finished canvas).

First you need to purchase a sheet of plywood of the required size, mark a 3x6 grid on it and cut it using a hand saw or electric jigsaw. Then divide the fabric into squares with a margin of 5-10 cm on each side. If foam rubber is used for filling, at this stage you need to cut it into pieces equal to plywood squares.

To assemble, a piece of fabric is laid face down on a flat surface, foam rubber is placed on top of it, and then a square of plywood follows. To prevent displacement during upholstery, it is recommended to glue the foam rubber to the plywood. Do not use staples as this will cause deformation of the filler.

Armed with a stapler, you need to carefully, without allowing the components to move, secure the edges of the fabric around the perimeter, forming folds at the corners.

If padding polyester or batting is used instead of foam rubber, plywood is immediately laid on the fabric and 3 sides are nailed with staples. Then the element is filled through the resulting pocket, trying to place most of it in the center. Finally, the open side is closed and the edge of the fabric is secured with staples.

According to the diagram, the remaining squares are made and, using construction adhesive, they are attached to a large sheet of plywood, placing the parts as close as possible so that gaps do not form.

The final stage is hanging on the surface, creating a soft bed wall.

Materials

You can design the headboard yourself using a variety of materials. There are many ideas for decorating it with wood. You can use smooth painted boards or knotty ones with minor processing. The main role is assigned to the harmonious combination with the overall interior of the room.

If you are decorating a room in the Baroque style, a headboard in the form of a fence will not suit you, and every person should understand this. Even if your bedroom has a simple interior, which includes a classic set from a furniture showroom, the picket fence described above will also be inappropriate.

Metal headboards are considered the old-timers of the bed kingdom. They are actively used in various interiors, because such material is suitable for a romantic bedroom, as well as for a strict Scandinavian setting.

Mosaic and stone can be used as an alternative material for the headboard. From them you can make interesting patterns with elements of sea pebbles, tiles and even glass pieces.

Textiles, like wood, are often used to decorate beds. The material can bring a cozy atmosphere to the room. A wide selection of materials allows you to realize even your wildest fantasies. For example, heavy velvet will be relevant for Rococo or Baroque, and golden satin will be suitable for an Empire room.

A leather headboard is a stylish option. Some people prefer the eco-leather option because it is more budget-friendly. Based on the embossing and coloring of the material, such headboards will harmoniously fit into any interior.

A laminate headboard looks good on the wall. Many people decide to decorate the space above the bed using this material. The headboard is original and stylish.

How to attach it yourself?

You can attach the headboard in several ways:

• to the wall, which is located above the bed. You will need to screw two hinges with self-tapping screws to the back of the headboard. The element is hung on bolts;
• to the frame. This method involves drilling a pair of holes on the sides of the outer part of the bed frame. The headboard will be screwed through these holes using screws;
• You can also make the headboard as a free-standing structure. You can purchase ready-made wooden legs or build them yourself. The legs are screwed to the headboard, and the structure itself is installed between the bed and the wall.

Interesting headboard solutions

The product can be decorated taking into account the original data. So, if the bed already has a headboard, it is restored, the old covering is removed, and the shape is changed if necessary. In this case, it is advisable to use buttons covered with the same material as the entire structure as decoration for the head of the bed.

If a piece of furniture did not previously have a headboard, you can create a structure of any shape. For example, a product made from scraps and pillows looks attractive. If you have the skills to work with wood, you can create a figured headboard for a bed. Another way to make this piece of furniture attractive is photo printing.

We advise you to study - How to choose a jigsaw - detailed instructions

From pillows

This option will not look solid, because there will be leaks in the structure. The main elements are small pillows. You can sew them yourself or make them to order.

A frame is used to fasten soft structural elements. It is made from bars of the required length with a section of 50x50 mm. It is recommended to paint the frame in a tone that will fit into the overall scheme of the interior. The pillows are connected to each other at four points. The design will look neater if you sew soft elements only in the corner areas.

Soft from rags

For work you will need 2 sheets of plywood. The end result will be something like a quilted headboard. One sheet of plywood needs to be cut according to the size of the existing scraps. The second will act as the basis of the structure. To get a soft headboard, cut pieces of plywood need to be combined with foam rubber. For this, an adhesive composition is used. Pieces of material are pulled on top. They are glued along the edges on the back side and additionally secured with a furniture stapler.

Then the products are fixed to the frame in the form of a sheet of plywood. Self-tapping screws, nails or glue can be used for this. The latter option is preferable, since it allows you to obtain a structure without visible defects.

Quilted using the carriage tie technique

This is the name of an ancient method of decorating pieces of furniture and vehicles (carriages). It is still in use today. The design is based on a sheet of plywood or MDF. For upholstery, it is better to use a material that looks expensive: velvet, velor, leather. Classic carriage pattern: squares, diamonds. If desired, you can create a different pattern or ornament. For this purpose, fastening elements with small caps should be used.

In addition to the set of tools, a crochet hook is prepared. With its help, a cord will be drawn through the holes on the sheet. Buttons should match the trim. If you couldn’t match them by color, you can cover them yourself using upholstery material. Buttons must have an eyelet. Instructions:

1. Foam rubber is cut out according to the dimensions of the plywood sheet. Holes are made in it with the required pitch, which is determined from a previously drawn up sketch.
2. The holes are cut with a sharp knife or a hardened metal tube.
3. The filler blank is applied to a sheet of plywood and the markings are transferred to it.
4. Drill holes.
5. The headboard is covered with fabric using the previously described technology.
6. Pieces of lace (15 cm long) are attached to the buttons. To secure them you will need a crochet hook.
7. To cover the headrests with buttons, you need to constantly check the distance between them using a ruler.
8. The laces are fixed on the back side using a furniture stapler.

Filler

A soft headboard implies the presence of filler. Previously, in the manufacture of such structures that can be found in old solid oak products, foam rubber and batting were used. Today, the choice of fillers is much wider; it depends on the manufacturer and cost of the bed. You should choose a filler based on your preferences:

In modern production, molded polyurethane foam is often used when making a bed from solid wood. The bottom line is that the filler is molded to fit the headboard blank, which makes this option clearly tailored to the dimensions of the frame. Replacing such a molded part will be problematic, and DIY repair is not recommended.

For those who like to tinker and repair with their own hands, it is often recommended to use batting, padding polyester and foam rubber. These materials are cheap, but their shelf life is significantly shorter than that of more modern solutions. In addition, if the litter is of poor quality, it can become a breeding ground for dust mites and trap excess moisture.

FAQ

Can a mattress pad make a bed firmer?

Yes, but not a topper. Some toppers are hard and some are soft. Both work well for creating a firmer or softer bed.

Which is better: a softer or a firmer mattress?

Generally speaking, medium-firm mattresses are most compatible with most people, and very soft mattresses are generally not recommended for anyone, as they typically lack support (which can lead to back and joint pain). When looking at medium-soft and medium-firm mattresses, it largely depends on body weight and personal preference, but medium-firm mattresses are slightly better for back and stomach sleepers, while both are good for side sleepers.

Does the mattress strengthen the plywood?

Without a doubt. Plywood cut to fit your bed can eliminate some of the issues that can occur with the frame/box spring and provide more support to the mattress. This way, you can sleep on a firmer mattress.

Is a firm mattress suitable for combination sleepers?

This should be fine as long as you don't spend a lot of time sleeping outside. If you do this, you will wake up with a sore shoulder and possibly some pain. It is better to opt for a medium-hard mattress. If you only sleep on your stomach and back, you can use a firm mattress without any problems.

What is the difference between a mattress protector and a mattress topper?

The mattress covers are thin and soft. They should not make the mattress harder. Mattress toppers can be hard or soft and are usually several inches thick.

Reviews of related products:

• Reviews of the best mattresses Reddit
• Mattresses without fiberglass
• Non-memory foam mattresses

Psst...the sleep review industry is full of liars, sharks and thieves. It's the modern version of getting ripped off at your local mattress store. So why should you trust us?

Subtleties of reupholstery

Many people decide to reupholster their headboard to give it a more attractive look. The most popular type is the carriage tie, which has been known since the 18th century. Previously, such trim was featured on carriages, hence the name. Today, this method is used in the design of furniture, as well as other decorative elements. The second name for the upholstery is capitonne.

To make the result of your work look impressive, you need to cover the headboard with expensive and rich material that will look good with a large number of folds. Such materials include velor and suede. Many people decide to cover their headboard with leather.

To carry out the reupholstery, you should prepare the following set of tools:

• furniture board or plywood, which will be used as a base;
• high quality fabric. You should purchase material with a margin of 30 cm more than the length and width of the plywood;
• foam rubber, the thickness of which is 5 cm. It should also be adjusted to the parameters of the selected plywood;
• padding polyester;
• buttons covered with fabric. They must have an ear;

• drill;
• knife;
• crochet hook;
• glue;
• laces. You can use rope or twine. Select the thickness taking into account the diameter of the button eye;
• stapler for furniture;
• wall fastenings and screws.

Subtleties of constriction:

• For such activities, you should choose a plywood sheet in the shape of a rectangle. If you wish, you can cut out the original shape that you like best;
• cutting of foam rubber is carried out based on the dimensions of the plywood itself. You will need to mark the material, indicating the area where the buttons will be attached. Most often, buttons are placed in a checkerboard pattern. Using a sharp knife, make button holes in the foam sheet;
• It is very convenient to make holes using a metal tube heated over a fire. You need to heat the pipe on a gas burner and quickly make holes. In one approach you can get about 2-3 holes. Do not forget to place a piece of board under the material so as not to damage the floor surface;
• Now you can put the material on the plywood and use a pencil to mark the places for the holes and make them with a drill. Use an 8mm wood drill bit;

We advise you to study - Types and rules for choosing diamond cutting discs for angle grinders

• the next step will be to glue the foam rubber to the plywood, taking into account that the holes for the buttons in both sheets are identical;
• On top you need to place one layer of padding polyester. Don't forget to leave a 5cm seam allowance for each side. The fabric is placed on the padding polyester, the supply of which is 10 cm on each side. Once you complete these steps, you can turn the future headboard over and secure the fabric to the plywood using a stapler;
• At this stage you can start preparing the buttons. You can reupholster them with textiles yourself or give them to the craftsmen. Thread a string through the eye of each button. Use laces that are at least 15 cm long and tie them in a knot. A crochet hook will be needed to thread the lace through the plywood;

• feel the hook on the fabric side. Use a ruler to measure the distance to a nearby button and make a small hole. You can use nail scissors for this purpose. Using a hook, pick up a button with a lace and thread them through the hole;
• the lace must be taut and properly attached with staples to the back;
• The last step is to secure and mount the headboard to the wall. For this purpose you will need self-tapping screws.

What levels of sustainability are there?

Mattress firmness is best described on a scale of 1 to 10, with 1 being the softest and 10 being the firmest mattress. This is by no means an accurate or scientific representation, but it does help buyers know a rough estimate of the firmness of the mattress they are considering purchasing.

Most mattresses range from 4 to 6 (medium soft and medium hard, respectively). For example, all Purple mattresses are medium to medium firm, while Sleepy offers a range of medium-soft to firm. If you're looking to buy a firmer mattress, the Sleepy's Rest Model is the one to look at.

the full scale looks like this:

• 1 — Extra-soft
• 2-3 - Soft
• 3-4 — Medium-soft
• 4-6 — Average
• 6-7 — Medium-sized company
• 7-8 — Firm
• 9-10 — Extra-Firm

Headboard options

If you decide to purchase a bed with an upholstered headboard, then it is worth exploring a wide selection of models, each of which will have its own advantages.

With some design solutions you can find a bed with a curved headboard. In this case, it can act as a separate element of the interior, separating the sleeping area from the window or wall. Such headboards can significantly exceed the width of the bed, separating not only the bed, but also the bedside tables. The task of such a large-scale interior element is to combine all the items of the bed into a single ensemble.

Another option that lovers of comfortable rest will certainly appreciate are beds with an adjustable headboard. They are comfortable, soft, beautiful, they are part of the body of the product and can take different angles, which allows you to take the most comfortable position. There are models with mechanics and electric drive. The backrest becomes vertical and can be fixed in a “reclining” or horizontal position. A very convenient option if you are used to watching TV or reading in bed.

Types of backs: description and photo

Bed headboards differ in type, shape, height and material:

• Soft, hard and combined. For the first option, a fabric that is pleasant to the touch is selected and attached to the finished frame. Filler is placed inside. Fabric headboards create coziness and are very comfortable for relaxation. The most comfortable ones are upholstery made from natural fabrics. This includes leather, eco-leather, suede, velor, and other types of textile material.
• For solid backs, you can take chipboard, laminate, MDF, metal or wood. With such fabrics, the product lasts a long time and is inexpensive.

  Tip To give furniture an unusual look, soft and hard fabrics are often combined in one version. It can be velor with silk, synthetics, leather, or other combinations.

• Combination makes the product unusual and different from standard types of beds.

Soft figured headboard:

Solid rectangular wood headboard:

Combined headboard (combination of hard and soft materials)

High curved headboard:

High soft headboard:

Corner headboard:

DIY wooden headboard

This style is great for a classic bedroom design. Here's how to make a DIY headboard for a queen size double bed. Measure the frame brackets and determine how tall the headboard is needed. It will be at least a meter. Trim the wood on a miter saw and sand the edges and all sides (especially the faces). Then measure and cut each board into 60 cm pieces, making 12 pieces in total. Sand all edges and surfaces by hand using fine-grit sandpaper. In general, this is the beginning, how to proceed further, read the instructions on the author’s website, he was not lazy and described everything in great detail. For clarity, view the step-by-step photos of the master class below in the gallery.

Photo source: www.instructables.com/id/Bedroom-Headboard-Queen-Size/

Beautiful wooden headboard

The idea for this project came from a need for a headboard and a strong desire to not spend a fortune on a piece of wood from a typical furniture store.

Probably many will agree that a finished project using recycled wood can be no worse than one made from new boards. How to make a beautiful wooden headboard, see the step-by-step photos below.

Photo source: www.instructables.com/id/Rustic-Pallet-Headboard-queen-Size/

Wooden headboard with lighting

A stylish headboard can make a bedroom feel cozier, or at least much better than just a bare wall. And the bed will become an attractive piece of furniture and help define the design of the room. Headboards have their own history; in the old days, headboards were used to provide warmth. They were typically made of wood, often carved with intricate designs. Taller and more ornate headboards became a symbol of status and wealth. Today things are simpler, headboards hold the mattress in place, keep our pillows from falling off and rubbing against the walls, and provide a comfortable place to support pillows for reading or eating breakfast in bed if you so desire. As for the design, many people prefer a simple rustic, or as they call “farm” style, such as you see in this example. You can read how to do this in the instructions on the author’s website.

High wooden headboard

If you prefer a simple style, here's an example of how to make a tall board headboard with your own hands. In this case, the structure is assembled without a frame; the boards are simply nailed to the wall. Not very practical, but simple and reliable, only if you do not plan to make a rearrangement in the near future. A short instruction on how to prepare and secure the boards can be found on the website. Although the idea is clear even without a step-by-step guide. The work is not difficult, but the effect is obvious; your bedroom will look completely different.

Photo source: www.furnishhome.ru/article-1893-derevyannoe-izgolove-dlya-krovati-svoimi-rukami.html

Wooden headboard for single bed

Just an example of how to make a wooden headboard for a semi-tray bed with your own hands.

Instructions and a list of materials can be found on the website, link under the gallery. Below in the gallery there is a master class with step-by-step photos.

Photo source: www.instructables.com/id/Beetle-Kill-Pine-Headboard-and-Frame/

Substrate treatment

To make a bed headboard with your own hands, you need to process the base. If the base is an old bed, first of all you need to rid the frame of the previous covering. Then, on the inside, along the length, boards or plywood cut along the contour are bolted. If desired, you can increase the length of the headboard using special bars, placing them on brackets for soft covering. Don't add a lot of details. If you need to make a wooden headboard of the bed with your own hands, then wooden boards are used as the material for the backrest, which can be arranged in any order.

Then you need to make holes at the headboard using a drill. To do this, you can use a perforated panel on which the marks are visible. But these devices have a high price, quickly become unusable, and it is irrational to use them to mark the necessary places.

A master class on making a bed with your own hands clearly demonstrates all stages of work. The production stages are as follows:

• determine the main point of the head of the bed;
• connect the found point with the middle hole on the perforated mesh;
• from this place, retreat down four rows - this is where application should begin;
• Use a marker to place marks through the holes in the required places;
• you need to mark the first point. It is considered fourth down from the center. Then you need to find the eighth point - it is located at the eighth horizontal mark. So we mark the points to the end of the row in both directions, then we make such marks vertically;
• the entire headboard should be marked in this way in a checkerboard pattern, with four points retreated horizontally and vertically from the marked ones;
• marks must be placed on the entire top of the headboard;
• 10 centimeters should be left along the entire perimeter of the headboard;
• Using a drill, we begin to drill holes. You shouldn’t make them too big, a diameter the size of a needle will suffice. If there is a frame at the back of the product, it must be drilled.

You can trace the holes that have already been moved on the perforated plate so as not to forget what has already been done. There is no need to apply dots to the very edges of the headboard, leave a few centimeters untouched

Key points when choosing a headboard

The main parameters when choosing a headboard are appearance and comfort. For those who spend a lot of time in bed reading books and watching movies, a soft headboard is more suitable.

Taking into account the fact that people will often lean on the headboard of the bed, you should choose upholstery fabric that will be easy to care for (wear-resistant artificial or natural leather would be the best material).

We advise you to study - How to install a shower cabin in a private house

The hard back option is suitable for those for whom the design of the product is more important than comfort and functionality (for example, it is very uncomfortable to lean on a wrought-iron headboard and place a pillow on it). Here you can experiment with the shape of the backrest, taking into account the interior and concept of the bedroom. Suitable materials include wood, metal, and plastic profiles.

Regarding the choice of headboard fabric, you should pay attention to the following nuances:

1. the backrest made of the selected fabric should fit into the interior of the bedroom;
2. It is desirable that the fabric be wear-resistant and care for it does not bring inconvenience;
3. When choosing textiles with large patterns (flowers, geometric shapes) in bright colors, it is recommended to limit the interior to only these prints, so as not to overload the appearance of the room.

Having considered the following styles of room interiors, you can decide on the appearance of the headboard for the bed, which will fit harmoniously into the bedroom, create coziness and determine the necessary accents:

The classic style assumes the correct geometric shape of the furniture. Pastel, calm shades combine with the color of wood. Often, for a classic-style bedroom, wooden headboards or rich options with carriage stitch are chosen.

Design techniques

A high headboard is regarded by designers as an excellent opportunity to add individuality to the interior. They use non-standard shapes, bright upholstery, decorative trim, and even install built-in lighting elements. A bed with a high headboard can be a structure that reaches the ceiling in height. At the same time, soft elements will create a single composition with the overall interior design and set the dynamics.

If you need to combine a decorative and functional surface in a small room, then a headboard for a bed with shelves will be an excellent solution. This option is suitable for both a children's room and an adult's or couple's bedroom.

When choosing a design option, it is worth remembering that such products often require a high-quality approach to the arrangement of the interior as a whole. Otherwise, the original bed with a headboard will look alien without the support of other interior elements. By choosing a bed with a designer upholstered headboard, you will make it the central element of the room, which will set the tone for the rest of the interior.

Can a soft mattress cause back pain?

Yes. Soft mattresses are suitable for smaller people (up to 130 pounds) and side sleepers. Sleeping position plays a big role here - back sleepers and sleeping stomachs are likely to have back pain, especially lower back pain.

Making the mattress firmer will make it easier for backs to achieve proper spinal alignment. This will also provide some relief for stomach sleepers, although their sleeping position is a challenge in itself.

Upholstered headboard with a pattern of nail heads

Materials and tools:

• plywood sheet;
• a piece of thick fabric (canvas for paintings was used in this project);
• nails;
• glue (spray glue was used in the project);
• padding polyester or batting;
• scissors;
• furniture stapler.

Progress

Cut a rectangle of the desired size from a sheet of plywood.

Place 3-4 layers of batting or padding polyester, leaving a margin of 10 cm on the sides.

Using spray adhesive, glue the first layer of batting to the plywood, then subsequent layers to the previous one.

Staple the batting to the back, keeping the material taut.

Turn the headboard right side out. Spray the surface of the batting with spray adhesive and, starting on one side, carefully roll the fabric onto the batting. Press and smooth the fabric well so that there are no bubbles, folds or distortions.

After the glue has dried, attach the canvas to the back of the plywood. Stretch the fabric well, wrap it around the frame and secure it with a furniture stapler.

Using nails you can make any ornament, including one imitating a carriage tie. For this headboard, we made a neat thin frame around the perimeter. To make one, mark two points with a pencil in adjacent corners at equal distances from the sides.

Drive the nails in there, but not all the way, but so that they stick out above the surface. Tie the string around the head of one nail, pull it tight and tie it around the second. So we made a straight line so as not to draw on light fabric with a pencil.

Then use a pencil along the line to mark places to drive in nails at equal distances from each other. Make small marks that will overlap the nail head.

Hammer the nails. Instead of nails, you can use furniture tacks.

Attach the headboard to the wall using fasteners.

How to make it on the wall yourself?

You need to attach a large sheet to the wall. You can make several squares of the same size or combine them with different ones. The easiest way to work is to use synthetic winterizer or foam rubber. For finishing, artificial or natural fabrics are suitable, which look very impressive on the finished product.

The difference between the product and other options is that it should fit snugly both to the bed itself and to the wall. On the side of the wall there is no need to transform the surface or decorate it, but on the visible side (where the head will lie) you need to do everything as beautifully as possible. It is not necessary that the backrest be fixed tightly to the wall - it is enough that it is slightly pressed.

When stretching the fabric, do not stretch it too much. There should be no wrinkles or dents. Soft elements are nailed to the headboard or to the wall with hooks. If you are making several shaped squares, then it is best to take chipboard or plywood.

A padding polyester is glued to the base, and the surface is covered with fabrics with bright patterns. Then the frame is decorated. You need to carefully consider its dimensions for an accurate fit. Only after the dimensions completely match is it firmly installed so that the final action can then be performed. After putting on the cover, the headboard can be installed in place.

You can make the headboard of the bed yourself. To do this, you need to take the necessary tools and select materials, determine the length, width and shape of the backrest. After the necessary calculations, purchase beautiful upholstery fabric.