In the 21st century, more and more people prefer to buy sliding sofas rather than beds. The reason for this decision is practicality. The furniture does not take up space in the bedroom and folds easily. But it is not enough just to know about the existence of a product; before purchasing, some features are taken into account. The editors of the YaNashla website have prepared for you a rating of the best sofas for daily sleep for 2022.

Before the purchase

There is no need to buy the first option you like right away. It is important to know that most models are divided into two types:

• Guests. The peculiarity of this option is its low cost. But the furniture is intended for infrequent use, as the mechanism wears out quickly. Therefore, the choice should be approached with caution.
• For daily use. This is an excellent, but usually expensive option that will last a long time. The retractable mechanisms are convenient and do not wear out as quickly as in the previous model.

The purchase will be profitable and enjoyable only if a person is willing to take the time to study some of the characteristics. There are not many of them here, but you should know about them, as they will help you find a suitable option in a short time.

Dimensions

To find a suitable option, the area of ​​the room is taken into account, after which the dimensions of the sofa are determined. If a person has an average build and short stature, then finding a good option will not be difficult, it is only important to know:

• For one person, the optimal size is 80x200 cm;
• If you buy a double version, it is recommended to pay attention to models where the dimensions are 150x200 cm.

The dimensions described above may be inconvenient for tall people; in this case, you need to select a sleeping place based on your height. There is nothing complicated, especially when calculating the length, because you need to add 20 cm to your height. But you will have to try hard to determine the width. To begin, the user needs to fold his arms across his chest, then spread his elbows to the sides. Next, you will need the help of a second person to measure the distance from one elbow to the other. Adds 10 cm to the result obtained.

Sofa shapes

Sofas are:

• straight;
• corner;
• with ottoman;
• modular;
• island.

Straight sofas are a classic. There are a lot of variations. There are any sizes and colors.

collectmoments/Flickr.com

Straight sofas, like corner sofas, are usually placed along the walls and are often equipped with built-in tables, a minibar and folding shelves. It is comfortable to sleep on such sofas.

jiva/Flickr.com

Corner sofas should not be identified with sofas with an ottoman. In the East, this is the name of a type of wide soft ottoman. In our furniture industry, an ottoman is understood as the protruding part of a sofa. Often without armrests, but with a storage niche.

Modern sofas with an ottoman in the interior successfully serve as corner sofas, saving space in small rooms, and often serve as the main sleeping place for the owners.

Maxim Kachurovskiy/Flickr.com

Island sofas can be round or semicircular, oval and rectangular. These are expensive and status sofas. As a rule, they do not sleep on them. They are placed in the center of spacious rooms to create a relaxation area. It is desirable that the “island” be approached from all sides.

Modular sofas consist of several parts and can be combined in different ways. Modules can be used as separate furniture elements. It may contain a module with a sleeping place, but most often such sofas are designed for beauty and relaxation.

Thanks to their versatility and variety of shapes, modular sofas are perfect for studio apartments.

Scott Allen/Flickr.com

Three popular transformation mechanisms

Today, most manufacturers produce models that have various folding mechanisms. Often people are only interested in three popular performances:

• Eurobook. The main feature of this option is simplicity, while the reliability of the furniture is at the highest level. A person can use the product constantly, and wear will be minimal. There are no complex design solutions here, everything is elementary and does not break. In this case, the product does not need to be moved away from the wall to unfold it, unlike a standard book.
• Accordion. Another popular option that folds forward. Therefore, before transformation, it is important that there is nothing in front. The advantage of this design is that a person can put an orthopedic mattress on the sofa, which will be a convenient solution and will allow you to relax with pleasure.
• Dolphin. This mechanism is most often used in corner sofas. Transformation does not require force because the actions are performed with one hand. Everything is simplified and practical. Of course, the mechanism is complex, but durable, so frequent use is not a problem.

Lifehacks for those who choose a sofa

1. Decide where the sofa will be. Draw a plan on paper. This will make it easier to navigate the store. Calculate whether there will be enough space for walking when the sofa is unfolded.
2. Decide on the function of the sofa: guest or for daily sleep. Also think about who will sleep on it: a child weighing 40 kg or an adult man for a hundredweight. Based on this, choose a mechanism.
3. In the store, carefully examine the transformation mechanism. Its metal parts must be thicker than 3 mm, carefully painted and securely connected to each other.
4. Sit or even lie down on the sofa. Estimate the density of the filler. Pay attention to the sounds the sofa makes when you move. Creaking is a sure sign of a poorly glued frame.
5. Pay attention to the evenness of the seams and rows of staples. These are the nuances that distinguish a conscientious manufacturer from an amateur. Look at the back of the sofa. If you plan to place it not against the wall, but in the center of the room, it should also be neatly upholstered.
6. If the manufacturer's warranty is less than 18 months, choose another one.

Comfortable filling

Modern sofas may have a different transformation mechanism, but have poor filling, which will affect the quality in a couple of years. In addition, if the furniture is too hard or soft, this will certainly affect the condition of the spine. Such a device cannot be called useful. To avoid this, you should purchase orthopedic mattresses.

It is important to know that most manufacturers of such mattresses use the same base as a sofa. Therefore, constant back support is provided during rest. To change the hardness or softness to suit your own preferences, toppers are used. The most important thing when choosing a filler is to focus on your own weight.

It is also important to know about popular fillers that have a supporting effect:

• Independent spring block. This option is often used in the manufacture of orthopedic sofas. The top layer is made of polyurethane foam or its varieties. This helps achieve the required strength. Such a product can withstand a load of up to 110 kg, which is a good indicator, but the cost for this option is higher.
• Polyurethane foam. To make sofas, a special layer of furniture foam rubber is used, and its density must be equal to or greater than 30 kg per cubic meter. meter. A distinctive advantage of this design is elasticity and resilience. Such sofas hold their shape well and do not deform from frequent use. But there is also a significant drawback - the withstand load, which is only 70 kg. Therefore, it is recommended to buy a sofa for children or thin girls.
• Bonnell spring block with polyurethane foam. The peculiarity of the filling is its popularity and service life. This option has been used in the furniture industry for over 100 years and still remains relevant. There are two reasons for this - low cost and load-bearing capacity.

You can read more about these and other sofa fillings here.

Availability of drawers for linen

Of course, someone may say that this is an unnecessary attribute, but as practice shows, it is better to overpay for additional convenience than to fill your closets with bedding. A person no longer has to think about where to store a sheet, pillow, pillowcase, blanket or blanket. Everything will be under the sofa. Even refilling the structure will become easier; you just need to fold everything, pull out the drawer and put it away.

Why buy a topper

More and more people are buying a topper along with their sofa. The product is a thin mattress, the height of which reaches up to 7 cm. To make the product, various fillers are used, which are applied on top of a standard mattress. The topper is useful because it performs three useful options at once:

• Leveling the surface. In most sofas for sleeping, a person is faced with such a problem as an uneven surface. But as it turned out, it can be easily solved with the help of a topper. In this case, no action is required, just lay it down.
• Some models have good orthopedic properties. But some products, on the contrary, are hard, it all depends on the chosen filler and the preferences of the buyer.
• The topper protects the outer part of the structure from wear and tear, so the sofa will look like new for a long time.

Filler material

Hypoallergenic materials at the base of mattresses (foam rubber, synthetic padding and silicone) are soft. They are comfortable to lie on, but these fillers quickly sag. With regular use at night, over time, a feeling of discomfort appears from body contact with the hard base of the sofa.

Polyurethane foam with a height of at least 10 cm and a density of 30 kg/m3 or more is the optimal filler option in terms of price and quality ratio.

The best sofa for sleeping has a high-quality orthopedic mattress with a height of at least 15-20 cm. Its composition can consist of several functional layers consisting of polyurethane foam, latex, holofiber or coconut fiber. Latex is a natural material that will last longer than artificial polyurethane foam, but mattresses with it are much more expensive than those made of foam rubber or polyurethane foam.

Soft mattresses are purchased for older people so that the product follows the curves of the human body.

How to extend service life

Any expert will confirm that a high-quality sofa should last at least 15 years, and only then start to break down. If this happens earlier, it means either the person used the design incorrectly or bought a low-quality product. Even a cheap sofa can last 10 years if you care for it properly. To do this you only need to perform a few steps:

• Never exceed the maximum bed load. The sofa is sensitive to any changes. You shouldn’t think that if a person weighs a little more than permissible, then there won’t be any problems.
• Children should be explained that the sofa is not a trampoline, so they cannot jump on it. And adults are not recommended to stand up to their full height, as this spoils the inside.
• In order for the mechanism to serve for a long period, it must be periodically maintained: cleaned of dust, dirt, lubricated dry places, etc.
• The fastening must be periodically tightened or simply checked. This will help avoid unforeseen situations;
• To clean the sofa, you do not need to use folk remedies; it is better to use a special vacuum cleaner or contact a cleaning service. It is important to understand that dry cleaning will cost less than completely replacing upholstery materials.

Book

The photograph shows one of the main drawbacks of almost all “books” - the joint between the structures.

An old, time-tested device that was widely used in Soviet folding sofas. Simply pull the lower part up (as if tilting the seat) until it clicks, and then release. The back will take a horizontal position, forming a spacious sleeping surface.

This is a simple but reliable mechanism that will last for many years. Fragments of the structure are located inside, but they are compact, so you can arrange storage space under the seat. For example, you can put bed linen and other bedding there.

Advantages:

• simplicity and reliability;
• low price;
• there is free space for storing things;
• It folds and unfolds easily - even a child can handle it.

The “book” has several disadvantages:

• For correct operation, free space is required; it cannot be placed close to the wall.
• A deep depression forms in the middle, which can affect your sleeping comfort. This deficiency can be corrected with the help of a topper - a thin mattress up to 10 cm thick.

Top best models with Eurobook layout mechanism

GRAND Dallas

A high-quality model, created using high-quality materials. There are two sleeping places. A convenient transformation method will prevent damage to the mechanism and main parts. Decorative pillows included. There are comfortable armrests that do not lose their attractive appearance over time. Birch plywood and coniferous timber were used to make the frame; these species are known for their good strength characteristics.

The average cost is 58,700 rubles.

GRAND Dallas

Advantages:

• Convenient transformation;
• Removable pillow covers;
• Good filling;
• Linen box;
• Durability.

Flaws:

• Not found.

Sofa League Chester

A good and budget option that is suitable for installation in a corner. The design is double and can withstand high loads. The height of the product is 90 cm. The corner location can be either on the right or on the left, which is a convenient solution. Sold in 5 popular colors, so finding a product to suit your own decor will not be difficult. Fabric upholstery has good wear-resistant parameters and will last for a long time.

The average cost is 39,500 rubles.

Sofa League Chester

Advantages:

• Low cost;
• Attractive execution;
• Reliability;
• Durable design;
• Convenient transformation;
• Location of corners.

Flaws:

• Not found.

Solo-M “FRANKO”

Attractive design that is made of durable materials and will last for a long period. The product is suitable for installation in both the living room and bedroom. Sold in several colors, including orange, which will add unusualness. Spring block type - independent springs. Back cushions included. Below there is a linen drawer, which has good capacity.

Average price: from 39,000 rubles.

Solo-M “FRANKO”

Advantages:

• Attractive execution;
• Optimal height;
• No need to move away from the wall when transforming;
• Wall back;
• Convenience;
• 120 kg per bed.

Flaws:

• Not detected.

Top popular accordion models

Sirius Solaris

An expensive option, made in a modern style. Installation will require a lot of space, since the width of the structure is 1950 meters. Various materials were used in manufacturing, but they are united by good strength characteristics. The transformation mechanism is a metal frame accordion. The outer part is made of matting and microvelor, which has a positive effect on the strength characteristics.

Sold at a price: from 56,300 rubles.

Sirius Solaris

Advantages:

• Attractive execution;
• Convenient folding;
• Ergonomics;
• High backrest;
• Double model;
• Strength.

Flaws:

• No linen drawer.

Accordion Vegas 1600

A high-quality model that will last a long time and will not break due to frequent use. The products have an attractive design. When creating the frame, reliable materials were used that can withstand high loads and not deform. Polyurethane foam was used as filler. The sofa is completely collapsible, which will be convenient if the user decides to upholster it.

Sold at a price: from 38,000 rubles.

Accordion Vegas 1600

Advantages:

• Beautiful style;
• Price;
• Reliable mechanism;
• Good armrests;
• High quality upholstery.

Flaws:

• Not found.

Nepal-Furniture Lux “Accordion Lux-1,2” Ottoman 650

A durable option that is made of wood, metal, polyurethane foam, fabric and artificial leather. Optimal dimensions allow the structure to be placed almost anywhere. Number of beds – 2. Transformation occurs quickly and does not require any effort, but also guarantees reliability. Suitable for installation in the bedroom, living room, nursery and country house. There is a headrest, which will allow you to sleep more comfortably.

Sold at a price: from 35,000 rubles.

Nepal-Furniture Lux “Accordion Lux-1,2” Ottoman 650

Advantages:

• The armrests are made of natural wood;
• Good and durable upholstery;
• Does not require much space;
• Withstands high loads;
• The length of the angle may vary.

Flaws:

• Not detected.

Choosing the Right Size

A mattress width of 0.8 m to 1.2 m is enough for the comfort of one sleeper; for two people, the size should be increased to 1.4 meters or more. Standard models of sofa beds have a length of 1.9-2.05 m. This value is calculated based on the average height, to which 15-25 cm is added for the convenience of body positioning.

Creating comfortable conditions for sleeping depends on the dimensions of the sofa when unfolded.

Important! If the future owner is taller than 1.9 meters, you will have to order the production of a sofa bed taking into account individual parameters. The most economical option in this case would be to order a “clamshell” model. Corner structures or sofas with a “book” mechanism will cost the owner more – during their manufacture, the increase in size occurs due to a change in the area of ​​the frame.

Rating of popular dolphin type models

Color of Sofas Amsterdam NEXT

A reliable option that has a high service life and will last for a long period. The product is suitable for daily use, with minimal wear on the mechanism. There is a box for linen, which allows you to put all the necessary things. The upholstery is made of fabric that does not deteriorate from frequent use. Polyurethane foam and hallcon were used as filler. There is a 5-year warranty on the metal frame.

The average cost is 46,400 rubles.

Color of Sofas Amsterdam NEXT

Advantages:

• Attractive appearance;
• Reliability;
• Convenience;
• Durable frame;
• Long service life.

Flaws:

• Not found.

mobi Nicole

A good corner model that will last a long time and will not deteriorate from daily use. Each part is produced in Russia, which has a positive effect on durability and cost. The folding mechanism is convenient and reliable, so with proper use, the design will last over 10 years. Filling: polyurethane foam on a block of flat springs. The set includes pillows that are soft.

Sold at a price: from 41,000 rubles.

mobi Nicole

Advantages:

• Convenient accommodation;
• Attractive design;
• Beautiful pillows;
• Reliability;
• Strength.

Flaws:

• Not detected.

Furniture-Holding LIME

High-quality folding design that attracts the user with its appearance and soft upholstery. There are soft armrests that retain an attractive appearance throughout the entire period of use, while their wear is minimal. The only drawback of the design is the lack of a linen drawer, but this problem can be solved if a person has a spacious chest of drawers.

If you use a topper or orthopedic mattress, the appearance will never deteriorate. The product is suitable for installation in the living room or bedroom. The transformation mechanism is covered by a long warranty. Fabric type: flock.

Sold at a price: from 54,500 rubles.

Furniture-Holding LIME sofa

Advantages:

• Attractive execution;
• Convenient transformation, which is carried out with one hand;
• Style – neoclassical;
• Durable frame;
• Bed height – 46 cm;
• Good armrests.

Flaws:

• Not found.

General requirements and selection criteria

The size and design of the product, shape (straight or angular), the color scheme of the upholstery are important, but not essential parameters that you should pay attention to when buying a good and reliable sofa bed.

Manufacturers have taken care of many options for choosing models, from the type of spring or springless mattress to the folding mechanism.

A piece of furniture interior that is planned to be regularly used for night sleep should be selected taking into account the following criteria:

• ease of use of the folding mechanism;
• quality of frame material;
• the presence of an orthopedic mattress;
• bed size;
• quality of upholstery material and wear resistance parameters of fabric;
• composition of the filler or designs of spring blocks.

This is not only a space saver, but also an opportunity to purchase a children's sofa with an orthopedic mattress.

The best would be a sofa with an orthopedic mattress, which quickly transforms into a bed, has a reliable folding mechanism and a place to sleep with a sufficient degree of rigidity. Hypoallergenic and durable upholstery materials increase the service life of the structure.

At night it turns into a wide bed on which two people can easily sleep.