Bed in the wall: TOP-200 ideas with photos in the interior 2022

Design features

Beds with raised mattresses, which can be inserted into a closet, mounted on a wall or as a shelf, come in two types: vertical and horizontal.

Horizontals can be single or one and a half. They do not take up the entire height of the cabinet, and the upper shelves can be used for storing things. Such models are good for children and teenagers, as an option for guests.

Vertical folding beds can be any width, from 90 to 210 cm, but require high ceilings. Consider for yourself: a comfortable mattress length is 200-220 cm, more space on the frame, on the cabinet frame. In total, the ceiling height for a 200 cm mattress must be at least 220 cm, and for longer ones - even more.

Also note that a folding or lifting bed is attached to the wall. In this case, the load-bearing capacity of the wall must be sufficient to withstand significant loads that occur when lowering or raising the mattress. Such actions will have to be repeated often to ensure that the wall is reliable (partitions made of plasterboard, as well as walls made of aerated concrete, are not suitable).

The folding bed can be a single bed, a large single bed, or a double bed. The mattress can be foam or spring. Three types of mechanisms are used: springs, pneumatic lifts and remotely controlled electric drives.

Advantages of a folding design

These are very functional products that in many respects are not inferior to ordinary beds. During use, you can experience a lot of benefits:

• compactness and space saving;
• mobility - after use, the bed is assembled and put away in the closet;
• Possibility of use as an extra bed or for frequent moves;
• combination of several functions, for example, the “folding bed-stand” model;
• ease of unfolding and assembly;
• good ventilation;
• benefits for the spine when using a lamella design or an orthopedic mattress.

Despite these advantages, which can be seen in the photo of a folding bed, there are also some disadvantages.

Firstly, not everyone may like to regularly spend time unfolding and assembling.

Secondly, canvas and spring structures tend to sag over time.

Thirdly, the included mattress is not always of high quality and comfort, so you will have to take care of a new, more advanced model.

Positive and negative sides

Like any other piece of furniture, a folding bed has its advantages and disadvantages.

The advantages of furniture include:

1. Saving useful space is the main task of a built-in bed. When assembled, the piece of furniture looks like a wardrobe, and at night it turns into a comfortable bed;
2. Variety of Patterns: Furniture designers have come up with different styles and types of similar patterns. It's easy to find an option in a classic vintage style or in a high-tech style. The outside surface of the product is sometimes decorated with mirrors, which visually increase the volume of the room. This is very good for small rooms;
3. Functionality of the product - at the base of a bunk bed, special partitions serve as supports, which turn into shelves when the bed is raised;
4. With a built-in bed, you can change the interior of the room by disassembling and assembling the bed.

Along with the advantages, the product has several disadvantages:

1. The high cost is explained by the installation of expensive lifting mechanisms in the furniture structure. The price of a bed consists of several factors: the material of the product’s construction, upholstery, mattress, installed lifting mechanisms;
2. The need for daily bed transformation;
3. Unreliable lifting mechanism in low-quality models. Some owners of such furniture fear that the bed will collapse at the most inopportune moment - when a person is sleeping;
4. Unlike stationary furniture, you cannot sit on folding furniture at any time. To rest it needs to be disassembled.

Advantages and disadvantages

The folding design helps in organizing a place to relax in apartments and country houses. The products are ergonomic; when folded, they are stored under the sofa, behind the closet. Therefore, the interior of small rooms will not be overloaded. Transformers are folded and unfolded after and before bedtime.

The folding bed with mattress is light, so it unfolds on its own. The designs have affordable price categories. The piece of furniture is mobile, so it is used when traveling. The transformable bed is comfortable and practical, due to which it replaces a full-fledged place for rest. The structures can withstand a lot of weight. Beds from reliable manufacturers are durable. During operation, only mattresses will need to be replaced, which is beneficial and budget-friendly.

Folding products when folded allow you to save room space. The ease of transformation is achieved due to the presence of two halves, which turn into a comfortable surface. The furniture is ergonomic and can combine several functions: a folding bed and a cabinet, a bed and a pouf. Ventilation of the mattress is provided by a lattice base. If necessary, lamellas that fail can be easily replaced.

Disadvantages appear when used incorrectly: when the permissible weight limit is violated, when used carelessly. For regular use, the structure must be deployed daily, which can be inconvenient.

Folding bed: types

The desire to sleep on a good bed is understandable and logical - only comfortable sleep allows you to quickly recover. But it is not always possible to install a normal bed. Our apartments are not only not very large, but there are often not enough rooms.

This means you need to make the room multifunctional (combine a living room or office with a bedroom) or accommodate two or more children in one room. So we need to look for a solution. One of them is a folding bed or a folding bed. There are different types, so you can find a solution for every occasion.

Bed built into wardrobe

The bed size for the folding bed built into the closet can be any size from a single bed to a double bed (Euro). There can be two separate beds. The main thing is that there is a place where you can install and secure cabinet furniture (do not forget about the need for rigid and reliable fastening).

There are several ways to make this piece of furniture attractive. After all, a bed built into a closet should look attractive not only when open, but also when folded. The first way: the bed is hidden in the closet, behind the doors. According to the type of execution, doors can be regular hinged or with compartments. Neither is perfect.

The bed, built into a closet with a hinged door when lowered, is almost half covered. Not everyone likes it, and it’s not very accessible.

The second option is a bed built into the closet. Here the situation is better: the headboard in the closet is only 30-40 cm, which practically does not interfere. But there is another drawback: adjacent sections of the cabinet are blocked by a sliding door. That is, while the bed is open, the closet cannot be used.

Only three-door wardrobes are free from this drawback. Three doors sliding on three rails. All of them can be “oriented” in one of the parts. The other two appear to be open. In the case of a built-in folding bed, this is only possible for narrow models. After all, the width of neighboring areas should be slightly wider. That is, the wardrobe itself should be slightly longer than three times the width of the bed.

With a bed width of 120 cm, this is 380 cm and no less. Such a wardrobe cannot be installed anywhere, but if the bed is even wider... The doors are pulled apart and block access to the wardrobe

The third option is the most common. The headboard is crafted to resemble the adjacent wardrobes. The problem here is the legs. They are difficult to hide. Sometimes they stick out like a bee's antennae, which is unsightly.

Some companies make these legs in the form of canopies protruding from the cabinet. Some are ready to put up with such a disadvantage, while for others it is absolutely not suitable.

There is also an option with shelf legs. It is much nicer, but also more expensive, since it has additional mechanisms and stops.

Folding bed

This type of upholstered furniture is in great demand. The main requirement is ease of use of the product. Folding beds in the interior of a small room help create the image of a bedroom combined with a living room or children's room.

The strength of such products is their ability to simultaneously create comfort and save space. Furniture can be folded and disassembled, relieving the interior of congestion. The type of folding bed can be vertical or horizontal. A folding bed provides space for other activities.

In appearance, the folding design is completely different. In stores you can see both budget options and quite expensive things. If for various reasons you still can’t buy furniture, it’s not difficult to do it yourself.

you just need to properly prepare the necessary material and equipment. For installation, the walls must be reliable and durable, made of material that can withstand heavy loads. It cannot be used as a base for installing cots, plasterboard walls or partitions, or light wood walls.

Hidden

The most effective and affordable method of solving the shortage of square meters is the use of a hidden structure inside the apartment. Modern standard beds occupy almost the entire area of ​​the room. For this reason, there is nowhere to place more furniture and simply nowhere for everyday hanging out. A hidden bed solves this problem.

The sleeping place is very quickly hidden in a special niche in the wall. In addition, when assembled, it practically does not differ from the surface of the entire wall or cabinet. The outer side of hidden furniture is matched to the tone and quality of the surrounding material. The wall of the cabinet next to the bed will not be any different, but will look like a single whole.

Designers have developed many practical ideas for creating hidden furniture. For example, when he gets up, the bed turns into a shallow closet with shelves. Or an option when a large mirror is attached to the bottom of the product from the outside, which in a vertical position increases the space of the room.

You can apply a drawing or attach an original image to the surface of the furniture. They will serve as part of the interior decor of the room.

Transformer

A transformable bed that folds into a wall or a closet includes two types of furniture: a functional closet and a comfortable sleeping place. When assembled, the bed does not interfere with anyone and is invisible. If necessary, the structure lowers and opens the bed for sleeping, where you can relax. Also, storage boxes are often added to the design of the bed.

There are models of beds in which, when raised, the bottom turns into a sealed system. Here the shelves can be folded and the hanger holders can be pulled out. After folding, the items on the hanger are neatly placed in a niche under the mattress.

A built-in convertible bed is a good solution to take advantage of the free space in apartments with a small living space. Having decided on the choice of this type of furniture, before purchasing it, you should carefully study the types of transformable furniture products from various manufacturers.

How to choose the right folding bed

When choosing a model, you need to check the convenience of the folding mechanism. Difficulties in opening may indicate a poor quality mechanism. The required functions of the product are important. If you have a small room, you can buy a folding bed that contains 3 functions in 1 product. At night the model will become a sleeping place, during the day – a cabinet or table.

For trips outside the city and hiking, small-sized products in the budget category are suitable. Fabric for camping conditions must be wear-resistant - polypropylene, awning. The wire diameter should be from 2 mm, the spring diameter varies from 12 to 15 mm.

For a stationary resting place, models with wooden slats are suitable. Comfortable sleep will be ensured by a durable frame with a thick mattress. Elite folding beds are produced on the basis of slats. The products are equipped with wheels. The permitted load reaches 250 kg. The models are made from environmentally friendly materials, have orthopedic designs, and a durable metal frame.

The mattress in some models must be purchased separately. Orthopedic surfaces are the most comfortable. For filling, natural raw materials (wool, cotton) and synthetic compounds (holcon, polyurethane foam) are used.

Bed dimensions

The length of the product is selected according to the required height. In models for adults, the size should be 15 cm greater than a person’s height. The width suitable for relaxation is from 80 cm. A double bed reaching a width of 120 cm is suitable as a permanent sleeping place. When choosing a folding bed, the height of the product is important. Adults need at least 45 cm from the floor, children - 25 cm.

When purchasing, determine the permitted load on the furniture being transformed, since exceeding the norm will lead to breakage. The parameter depends on the type of structure and varies from 100 to 250 kg.

The value is affected by the frame material and the size of the pipes. For regular use, durable products with a maximum permitted weight of 150 kg are required. Such furniture will replace a full-fledged place to relax.

Transformable models are also produced in non-standard sizes, since the dimensions depend on the option of folding and combining pieces of furniture.

Folding bed design: convenient, practical and rational

When purchasing, you need to select a folding mechanism. The frame includes legs, a base, head parts, and hinge elements for connection. Folding furniture is made of reliable alloys with anti-corrosion coating.

The frame of the folding bed is made of steel or aluminum. Metal frames are suitable for models in an apartment or country house. The material is treated with polymer dyes with corrosion protection. Aviation aluminum is used in structures for hikes and trips outside the city. The material is lightweight, so the products can be transported.

The folding bed structure simply unfolds. Many models fold in half and have compact metal backs. Some beds are equipped with wheels for easy movement around the room.

The frame of a folding bed with slats consists of wooden slats. Curved bars support the orthopedic structure. The elements are slightly springy, which provides comfort and extends the service life of the model. The number of orthopedic lamellas is from 10 to 20 pcs. Wood slats are secured with rubber or plastic holders. The slats are also secured with metal supports on the sides of the structure.

Types of mechanisms

Furniture production does not stop and is constantly developing. Popular models become obsolete over time and are replaced by new ones that are also gaining wide popularity. Beds built into walls and wardrobes have not lost their position for many years and remain in demand. They earned their fame thanks to special mechanisms that allow them to be lifted vertically without much effort.

The lifting device is an important design element of a convertible bed. Thanks to these modules, the entire structure, which weighs several tens of kilograms, can be easily lifted and turned into a vertical fragment of a wardrobe or wall. Several lifting devices are common:

• Manual method;
• Spring mechanism;
• Gas elevator.

The first option is the cheapest, but also the most capricious, requiring periodic adjustments and some effort when lifting furniture. The mechanism does not contain additional springs and shock absorbers; lifting is carried out entirely manually.

The second method is less labor intensive. The spring version already has special shock absorbers in the form of coil springs, which allow you to lift the net without much effort.

The coil springs are made of durable carbon steel wire. The service life of such mechanisms reaches 70 years, and this is with daily transformation of furniture. The only drawback of the device is the appearance of noise during operation. Springs can stretch over time and need to be replaced.

The third option is the most convenient and complex. The operation of the module is based on the action of piston devices filled with compressed air. When changing the position of the folding bed, the lifting mechanism smoothly changes the position of the furniture. In this case, you don’t need to make any special efforts; the device will do everything itself. Gas lift is by far the most expensive of all types of devices.

There are device models equipped with an electric drive with remote control. This is a great way to transform furniture for people with disabilities or those who appreciate all things technological.

Classic design

For such beds, durable fabric is used, such as polypropylene, which is wear-resistant. The fabric is stretched onto a metal frame using springs or directly onto the “skeleton” of the folding bed along its perimeter. This is a lightweight budget model, characterized by high mobility and compactness.

However, the absence of slats makes the rest not so convenient and comfortable. The set does not include a mattress, which is advisable to purchase for greater comfort.

Over time, the canvas sags and stretches. True, there are also more elastic models made of durable fabric that does not fall through. These beds can be used even without a mattress.

Manufacturing materials

The warranty period for such beds varies from 3 to 10 years. This directly depends on the material of manufacture, the reliability of the mechanism and the overall quality of the product. Most often, models are sold without a mattress, so they are purchased separately. The following factors influence the choice:

1. Owner's age. Ideal support and comfort are personalized for each age category.
2. Weight. If the owner weighs more than 90 kg, then he needs to choose an option with greater rigidity.
3. Lifestyle. Professional athletes need a firm mattress. For sedentary people, this factor is not so important.
4. Health. Often a physical condition requires a specific orthotic design that minimizes discomfort.

Mattresses differ not only in the degree of hardness, but also in the type of filler. The option that retracts into the wall most often consists of the following material:

1. Foam rubber. Used as an additional layer - as a base. It is impossible to provide perfect back support.
2. Coconut fiber. Natural filler, optimal for orthopedic mattresses. One of the most expensive goods.
3. Latex. Stretchy and elastic option. Suitable for products with increased rigidity and load capacity.
4. Olofiber. Artificial raw materials with good consumer qualities. Breathable material that remains functional for many years.

Foam rubber

Coconut fiber

Latex

Olofiber

The basis of the furniture is chipboard, natural wood. The frame of transforming beds is also equipped with metal elements. Laminated chipboard or MDF are inferior in quality to natural wood. Plastic facades are becoming increasingly popular due to their appearance and budget cost. For the inside of the product, it is better to choose a functional solution. After harvesting the bed, there should be no empty walls.

An original solution is a seamless mirror or a full-size cabinet with shelves. When choosing, pay attention to the following criteria:

• frame strength;
• warranty period of the mechanism;
• sphere;
• quality of the mattress, if any;
• functionality;
• type of mechanism;
• style of room decoration.

The last factor plays an important role. In an expensive interior, a plastic bed will look out of place. The chromatic range, texture, and quality of the material are reflected in the aesthetic aspect.

Wood

MDF

Chipboard

Product dimensions

The width of the standard model of bedroom furniture ranges from 39 to 70 cm; for double beds it reaches two meters or more. Traditionally, products are characterized by the following dimensions:

• single bed - 80 × 180, 90 × 200 cm;
• one and a half - 120 × 180, 140 × 200 cm;
• double - 160 × 190, 180 × 200 cm.

Classic vertical models of standard size are suitable for small apartments, where assembled functionality is no less important. Horizontal ones are often designed in the form of chests of drawers, which are less functional. The size is selected based on the user’s weight (the wider the bed, the greater the load capacity) and height.

The parameters may be affected by the square of the room. The bed should be placed against the wall, not against the side walls. The owner should walk freely on both sides, linen drawers should slide out easily, and the furniture itself should rise and fall without touching foreign objects.

A bed with a lifting mechanism does not hide the space in the apartment; it allows you to create a functional work area. Thanks to the design features of modern models, you can rationally organize space.

Additional drawers, compartments for linen, and storage systems will be a pleasant bonus. When choosing, it is important to consider the durability of the mechanism, the quality of the product itself and the permissible load capacity.

Photos of built-in beds in the interior of rooms

Photos of examples of using a bed in the wall in different rooms.

To the living room

In the hall, a bedroom built into a closet or shelving is an excellent solution for rational use of usable space.

In the bedroom

Due to the huge number of varieties and different characteristics of furniture, it is especially effective to place a built-in model for adults inside the bedroom and significantly save every square meter during the day.

To the nursery

For a small nursery for a schoolchild, a boy or a girl, a multifunctional bed built into a closet or set with an add-on, shelves, drawers and a workplace is perfect. In a room for two, a two-story wall structure would be appropriate, which can also be equipped with a desk or a two-seater model with a second pull-out level under the first.

Cabinet

A bed in an office is probably not the most popular use for convertible furniture in living spaces, but it is quite common in very spacious homes. Sometimes, when working for a long time, it is more convenient to spend the night in the office than to come to the bedroom, risking waking up the family.

The bed is integrated into the closet, which fits perfectly into the overall picture of the room. This could be part of a bookcase or an imitation surface for a painting or panel.

In offices, horizontal models of transformable beds are often used. They are compact, designed for sleeping space, require less usable space and can fit seamlessly into home office furniture solutions.

But in some cases, installing a vertical folding bed is justified. Here is an example of using a vertical bed built into a built-in wardrobe with smooth fronts.

To the balcony

For a loggia, this option looks quite interesting and practical. When assembled, the structure can be a closet or other storage system, and when disassembled it can become an excellent sleeping place for a good rest.

Auxiliary room

In private homes or large apartments, the folding bed can also be integrated into a closet located in a utility room - hallway, hallway, space near the stairs and even in the laundry room. This option for arranging a bed is suitable for occasional use by late guests.

Indeed, very often homeowners do not have the opportunity to allocate a separate room for receiving guests, because it is obvious that most of the time the room will not be used.

Children's folding beds

Folding products for children must be suitable for age categories. Manufacturers produce designs for young children and teenagers. The models are used as a comfortable sleeping place and have comfortable designs that are not harmful to health. Folding structures for children should be mobile, compact, and lightweight. Therefore, the models are easily transported when traveling outside the city and used on hikes.

Furniture allows you to save space in the room, especially in a room with two or more children. Folding beds with a mattress do not take up much space, they can be easily rearranged and disassembled, freeing up space for study or play. The cost of folding beds is lower than standard bed models. But designs of elite price categories are also produced.

Manufacturers use environmentally friendly and safe compounds for modernized furniture for children's rooms. Folding structures are produced with orthopedic bases to avoid the formation of incorrect posture.

According to their functional purpose, there are folding structures and beds for growth. Folding models are practical and are used as a permanent place to sleep in small apartments.

Products for growth are economical, ergonomic and popular when arranging children's rooms. The size of the bed is increased gradually, which makes it possible for the growing child to use the structure for a long time.

Design of beds that retract into the wall

A murphy bed can easily become the focal point of a room. To create a similar effect, it is advisable to use bright colors and spectacular decorative elements. For example, cabinet doors can be decorated with carvings, paintings, photo prints and mirrors, which in turn will further increase the area of ​​the room, or decorated with glass inserts with polished patterns applied.

In addition, a niche in the wall of a folding model can be decorated with wallpaper with a colorful and original print, soft panels, lighting, natural finishing materials or their imitation.

Wardrobe bed ideas in different styles

This folding wall structure will look good in a variety of design styles, such as minimalism, hi-tech, loft or modern. For example, wood products will become a harmonious element of vintage Provence, rustic country or classic style.

Tips for choosing beds

Basic recommendations for selection:

• When purchasing this product, first of all you need to make sure that it is safe so that the bed does not break during sleep or fall out during assembly.
• For a small space, a bed in the wall with a vertical folding mechanism is best.
• When choosing a design for a children's room, special attention should be paid to the fastening and transformation mechanism. It is better to give preference to gas lift, since, unlike springs, it will not lose elasticity.
• When choosing a nightstand, it is advisable to choose a bed with a solid base, and not on separate legs.

Where is the best place to order and what to pay attention to

Like most other furniture, a built-in folding bed can be ordered from a private owner or from a factory or furniture workshop. In this case, it is better to order from a place where the production of such furniture is not one-time, but pre-production.

The fact is that for each order you need to select your own mechanism. If you choose the wrong one, the bed will be difficult to lift or may rise spontaneously. Both options bring little joy, but the second is much worse, as it can lead to injury.

Shelves are optional but allow for fuller use of space.

When choosing a manufacturer or buying a ready-made option, ask about the warranty on furniture. It is normal that the furniture itself is given a warranty period of at least 1.5 years, and the mechanism is given a warranty period of at least 5 years. Also inspect the locking system in the closed position, check how easily the mechanism operates.

If you choose a folding bed built into a closet, pay attention to the appearance of the closet when closed. After all, during the day it will remain in this form and should look good. You can also see that the bed frame is not much larger than the mattress. A bed with a frame protruding 10 cm beyond the mattress is very uncomfortable and risks permanent bruises.

Orthopedic models

A slatted bed is a full bed with a strong frame and a solid base made of wooden slats. A special mattress is needed for rest, but your back will feel great after sleep.

The advantage of slats is their ability to bend to the shape of a person’s figure without the risk of breakage. The fasteners used provide the best shock absorption for the structure.

The spaces between the wooden planks provide excellent ventilation, resulting in excellent moisture and heat exchange.

For more comfortable use of folding beds, they can be equipped with wheels for moving or a headrest that secures the pillow at the head.

DIY bed in the wall

Not everyone can afford professional installation of such a mechanism, but this does not mean that one should abandon an interesting idea. It is quite possible to assemble such a bed at home.

Step 1. The first step is to assemble the frame of the future bed. To do this, it is recommended to use self-tapping screws and glue. In order for the self-tapping screws to hold the structure as effectively as possible, it is necessary to properly prepare the surface.

Step 2. In order for the bed to work for a long time, it is necessary to strengthen the box with crossbars, securing the lower part to the bottom.

Step 3. Next, we perform a similar operation with the front wall of the future bed.

Step 4. Attach the decorative parts to the side walls using glue and self-tapping screws, keeping the level. You can use a special tool for this.

Step 5. Using standard fastening methods, you need to strengthen the back of the box. It should be taken into account that the ends of the “ceiling” equally protrude beyond the edges.

Step 6. Next, the front part of the lining is fixed, similar to the previous one. But it is necessary to take into account that there is 2.5 - 3 cm left on the sides.

Step 7. The next step is to create a box for the future mattress. To do this, you need to connect the side walls, which are made from the cut of the board, and attach them to the bottom of the plywood. You can use a saw or jigsaw to cut products.

Step 8. Next comes the creative stage of work, that is, creating a mock-up of the side, which will be visible when assembling the bed. Decorative elements are attached using glue or nails with decorative plugs.

Step 9: Magnetic devices can be used to secure the bed. It is worth paying special attention to this stage, as these supports prevent the bed from falling out during assembly. In addition to magnets, various types of loops can be used.

Step 10. After completing the previous stages of work, the stage of decorating the bed is carried out, for example, painting the surface.

Step 11. At the end of the work, the box is fixed by screwing screws or an elastic but durable strip is attached.

Photo