How to make a folding chair for fishing: do it yourself

Fans of fishing know that enjoying this process will be much more enjoyable if you take special equipment with you to the pond. The feeder chair serves exactly this purpose - creating a more comfortable environment. There are many options for such chairs in stores, many of them are quite expensive. To save your family budget, you can make a feeder chair with your own hands that fully meets the fisherman’s requirements. This is not difficult to do, you just need to prepare the necessary tools and carefully measure all the parts.

Features of fishing chairs

You can assemble various models with your own hands from various materials. But their basic characteristics remain unchanged. Among the qualities that chairs should have are the following:

Stability. The chair must be stable regardless of the topography of the coastal strip.

Power. The design must withstand the weight of the fisherman and not break after the first use.

Reduced size and weight. Storing a bulky and heavy chair even in a personal car can be problematic. And in cases where it is necessary to overcome a certain distance, any person tries to lighten his burden. A heavy or large chair is unacceptable in such a situation.

Additional accessories

Fishing chairs can be equipped with additional accessories. These could be footrests, sun umbrellas, fishing rod holders, folding tables, fabric side pockets. But do not forget that all this must be somehow delivered to the fishing spot. Therefore, if you go fishing on foot or ride a bicycle, then the best option is the one that weighs less.

It is advisable to store the fishing chair in a specially designated place where it will not disturb anyone and will be protected from moisture.

Making a homemade fishing chair is not difficult and does not take much time, but it will make your fishing much more comfortable.

Many fishermen practice making various accessories with their own hands. Firstly, it is interesting, and secondly, this approach allows you to save significant money.

Recommendations

it is necessary to carefully consider the design of the chair so that it is comfortable and durable;
To create a fishing chair, you should use the highest quality elements so that the product is strong and durable;
Be sure to consider your fishing area to choose a suitable chair design;
Of course, you need to take into account the weight category of the fisherman when starting to create a drawing for making a chair with your own hands;
Before you go fishing, check the strength of the chair; you can put something heavy on it, the weight of which is close to the weight of an amateur fishing chair;
It is best to choose a color scheme that matches the environment. So that sitting in a chair does not cause unpleasant emotions and experiences.

Design options

Before deciding how to make a fishing chair with your own hands, you need to decide what type it should be.

The simplest option is a stool. These are the lightest and most compact models that are easy to carry. Moreover, their manufacturing technology is simpler than other options.

A fishing chair with a back will be more comfortable. Assembling with your own hands is a little more difficult than the previous option. However, it will allow you to relax your back when sitting for long periods of time, which is also important for any angler.

The most comfortable option is a chair that has both a back and armrests. Sitting on it, the angler will not experience muscle tension. True, such models are heavy. But if you go to the fishing spot in a personal car, this is not a problem. One of the modifications of this model can be considered a folding chair. You can also lie down on it.

Experienced fishermen often prefer a wheelchair. You can sit on it. And inside it has storage space where you can hide gadgets, tools or take a photo. This option resembles a home closet. There is only room at the top. In order not to get up every time you need to look at the contents of the drawer, the drawer can be designed as a drawer.

A little about fishing platforms.

Hello friends. Today I would like to talk about fishing platforms. This topic is not so well covered on the Internet, and novice fishermen and those who decide to take up fishing have a lot of questions.

In this article, I will not talk about which platform you should buy. It all depends on your budget and taste preferences. There are a lot of companies producing fishing platforms. There are also craftsmen who collect them with their own hands. For example, my fellow countryman, familiar from the users of the Yaroslavl resource galavl.ru, respected by everyone, “Borisych”. In general, choosing a platform is an intimate matter and everyone will decide for themselves which platform to choose. I want to talk about what the platform consists of, how it can be used, and what the fisherman’s seat is equipped with.

First of all, you need to understand that the platform is designed for weight loads

You need to pay special attention to this. And choose a platform based on your weight

For reinforcement, the platform is equipped with legs of different diameters D25, D36. You need to pay special attention to this. Because It is to this diameter that you will have to select a body kit in the future. The greater the weight the structure is designed for, the thicker the diameter of the supports. Most often the legs are made of aluminum in order to lighten the weight of the structure. In addition to diameter, supports also come in different profiles. Basically they are either round or square. The cross section does not affect the stiffness in any way. And another important factor of the legs is that they are telescopic, or “solid”. Telescopic legs expand the platform's capabilities. Thanks to this design, you have more options for installing the platform according to the height and unevenness of the fishing area. Most supports are equipped with adjustable heels, which also has a positive effect on ease of installation on the shore. So when choosing a platform, pay attention to the heels.

How to disassemble a siger child seat

Most often, the legs are attached to the frame with special wings. This allows you to further adjust their reach and set up your workplace in the way that is most convenient for you. Lambs also come in different shapes and designs. I like the ones shown in the picture below.

The main thing in the entire design is the seat box. Much depends on its configuration. You need to understand that its size and type will determine your comfort while fishing. Almost always, the seat is also a drawer. In it you can store the necessary small things - hooks, leashes, fishing lines and other necessary belongings. Of course, the size of these boxes does not allow storing coils or other bulky items inside, but there are special bags and cases for this.

There are platforms that represent entire constructors. Those. In addition to the standard module of a box with a seat, you can purchase separate modules to suit your needs. For anglers who experience problems associated with back pain, there are special chairs with backrests.

An important element of the platform is the pedana. They can be folding or retractable. It's up to your discretion. There are also detachable pedals. But this is rather an exception. The purpose of this design is extensive. I'll list the main ones. Pedana - allows the angler to sit comfortably in an area where it is necessary to enter the water in order to reduce the casting distance. An example would be reservoirs with wide irrigation, where the depth of the coastline does not exceed 30-50 cm. You can simply bring the platform into the reservoir and comfortably sit at the required distance. This will reduce the required casting distance of the equipment. The Pedana helps you fish areas of the coastline where the water level is inconsistent. By placing yourself on a platform with this device, your feet will remain dry and there will be no need to move your workplace. An important advantage of the pedana is the additional attachment points for attachments. But we will talk about it later. Another advantage, of course, is that you can stand on the pedana while landing fish, this will allow you to drag the fish over steep edges with minimal losses

Believe me, this is very important

The choice of fishing platform depends on your preferences and wallet. Everywhere has its own nuances.

Finishing

To increase the service life of the feeder and maintain its presentable appearance, various upholstery options are used. They depend on the material used and can be as follows:

Wood - treated with an antiseptic composition that actively resists mold and mildew. A primer and varnish or varnish are also applied on top. This set of procedures will help increase the moisture resistance of the tree, as well as its resistance to temperature fluctuations.
Metal. The main problem is rust, which destroys the structure of the pipes and the overall strength of the product. Therefore, anti-corrosion treatment is the main task; painting is allowed.
Plywood (chipboard) - this material must be treated in the same way as wood; antiseptic treatment, priming and painting are carried out.

Requirements for filling coffee bean bags, algorithm for filling granules

In order for a DIY folding chair to retain its appearance for as long as possible and remain reliable, it must be treated with special care. After fishing, the product should be cleaned of adhering dirt and dust, and wipe off moisture. It must be stored in a dry place.

Making a feeding chair with your own hands is quite simple. Although this task requires serious preparation and the availability of tools. When choosing the optimal fishing chair, it is better to choose a combination of a steel frame and a fabric one. It will be durable and resistant to negative external factors.

Treat wooden elements with an antiseptic and paint if desired.

Apply a special anti-corrosion coating to metal parts

After fishing, always clean the chair from adhering dirt and grass.

Materials used

You can assemble a fishing chair with your own hands from various materials. Using available raw materials will significantly reduce the cost of all work.

Wooden chairs are common. Wooden blocks of different sizes are used both to build the frame and to make the seat, backrest and other elements.

Metal pipes are widely used as supports. They can be combined with wooden or fabric seats. The seat is cut from pieces of canvas, leather and other durable fabrics. There are also plastic elements. It is a durable yet lightweight material, ideal for making fishing chairs.

The structures are assembled with your own hands using fasteners. The base is usually assembled using self-tapping screws, bolts, screws, and staples.

Video

Any fishing enthusiast will agree that, no matter how exciting fishing is, staying in one position for a long time causes discomfort. Of course, you can simply sit on the grass or snags, but in this position your legs will quickly become numb and your back will begin to ache. To have everything you need at hand and at the same time relax, you can make a feeder chair with your own hands. It's not as difficult as it might seem. The main advantage is that you can save money.

To make such a seat for feeder fishing, you will need materials that are probably available in any garage or shed. You may have to buy a few things, but the costs will not be as high as if you wanted to buy a folding chair in a store.

Tools

In the process of making and assembling a wooden fishing chair, you will need the following tools:

drill;
screwdriver;
hacksaw;
English keys;
scissors for working with fabric;
sandpaper.

Materials that will be useful:

wood;
bolts and nuts;
paints and varnishes;
brushes

Stool on four plastic supports

Self-erecting folding stool-style fishing chairs are very convenient to use. The base in them is made of plastic pipes. A piece of dense and durable fabric is taken for the seat.

The first step is to prepare the blanks. 8 pieces are cut from a plastic tube. The pieces that will serve as support should be approximately 50-60 cm long; 4 such pieces will be needed. You will also need 4 pieces 35-40 cm long, two of which will go to the lower jumpers between the legs. They will allow you to obtain a more reliable and stable structure. And the two organize the venue.

Long parts are connected in pairs. Each pair is secured with a screw in the middle. You should end up with two parts in the shape of a cross. They are connected to each other at the edges by short elements. You should end up with a smooth texture. The ease of bending (opening) is regulated by the tension of the bolts.

The upper short decks are connected with fabric (for example, tarpaulin). You should sit down. A narrower fabric band is stretched between the bottom pair of sweaters. This will be a limiter that will prevent the chair from bending.

Simple fishing design made from PVC plastic pipes

This version of the chair can be assembled in a few hours according to the following scheme:

The plastic tube is cut into 8 equal parts: 4 parts of 50 cm and 4 parts of 35 cm.
Two identical parts are cut out of tarpaulin or any other fabric. One of them will be a seat, the other will be a jumper to stabilize the product. The width and length of the handle will directly depend on the size of the stool.
Subsequently, the two long pipes are connected by two crossed bolts.
At the top and bottom, long sections are attached to short pipes using plastic corners. As a result, you have a ready-made folding stool design.
Now we take our piece of fabric and fold it in two layers. Next, we cover the top of our structure with it.
A thin strip of fabric needs to be folded in two layers and sewn to the lower supports.

Tip: Avid anglers will also want to make a boat chair and table out of PVC. In nature, a folding table or a comfortable table for a laptop can also come in handy.

How to make a folding fishing boat out of wood?

Let's see how to make a simple wooden fishing chair with four legs. To do this, we will need several wooden beams with a square section of 35-40 cm, from which the legs of the product will be made. The process of making a chair will look like this:

We make holes in the center in the prepared beams.
Next, bend the bars into an X shape and fasten them with bolts.
We do the same with the second pair of beams. As a result, we should get two identical letters X, which we will link together.
The final stage will be upholstering the chair with fabric. Any durable and wear-resistant material (tarpaulin, Bologna fabric, leatherette) is suitable for these purposes.

In order for the chair to last as long as possible, it should be treated with antiseptics and coated with a two-layer water-repellent varnish.

Attention: In order for the folding fishing chair to fold and unfold easily, you need to correctly adjust the tension of the bolts.

Carp chairs

The specificity of carp fishing is such that the fisherman has to spend several days in a row on the shore of the reservoir while waiting for a bite from a trophy fish. That is why a carp fishing chair should have greater functionality and an increased level of comfort.

What to look for when purchasing

A modern carp chair is not just comfortable furniture, but a multifunctional device that provides the angler with maximum comfort while fishing. When choosing this device, you should focus on several indicators:

the maximum load for which the product is designed;
number of possible adjustments;
possibility of installing additional attachments;
transport dimensions of the product;
the presence of a special portable bag;
total weight of the chair;
quality of materials.

Anglers whose body weight exceeds 120 kg should select more durable designs that can function well under significant loads. Information about the maximum load a particular model can withstand must be indicated in the technical data sheet attached to the product. There are many models on the fishing market that are equipped with additional racks and can withstand weights of up to 200 kg.

A good chair has various adjustments to make fishing more comfortable. The backs of modern models can be folded, so the angle of their inclination can be easily adjusted directly during fishing, without getting up from the chair and without stopping the fishing process. Armrests and other elements can always be removed if necessary.

Particular attention should be paid to the racks, each of which must have independent adjustment. At the bottom of each rack there should be a movable element that allows you to install the chair on banks with a steep slope, typical of many reservoirs. This movable element has a rounded shape and a large surface area, which prevents the posts from sinking into soft ground. Each stand must be adjustable in height, which is necessary if fishing takes place in areas with uneven terrain.

A chair with a folding backrest can easily be converted into a small lounger.

Folding chair with metal supports

You can also make folding chairs for fishing with your own hands on metal legs. Their design is similar to the previous version. The only difference is the use of aluminum (or steel) pipes. It is worth noting that this option will have more weight than one made from a plastic tube. But at the same time its reliability will be greater.

The manufacturing process itself is similar. Blanks can be taken of the same size. The only difference is the way the individual elements are connected to each other. Metal will be a little more difficult to work with. Most joints can be welded using tools. Only at the intersection of the legs should there be bolts. Otherwise the chair will not fold.

Arrangement of the feeder's workplace

If you have the right equipment, the only thing left for an ice fisherman to do is set up his workplace well. All elements of equipment used for fishing should be located literally at arm's length from a seated person. This will save him from having to get up often, exposing himself to the cold wind and being distracted from the process of fishing.

The main element of the arrangement is the feeder chair. After all, winter fishing is mainly a passive activity - a person has to sit in one position for a long time. At the same time, the load on the back increases, especially on its lumbar region.

Drawing

Before making a fishing chair, it is best to draw a drawing of it. This will make it more convenient for you to cut materials and assemble the structure into one whole. What is a project? This is an image of the mobile future in three different projections: front, side and top. On this drawing it is necessary to indicate the number of parts, their exact dimensions and options for connecting individual elements to each other. Optimal dimensions of a fishing chair:

width from 270 to 500 mm;
height from 270 to 470 mm.

Almost all fishing chairs will consist of the following elements:

DIY body kit

You can also easily make a homemade body kit for the feeder chair. To do this, you will need plastic plumbing fittings, pipe fasteners, and the aluminum pipes themselves.

There are many design options, and you can choose the one that is most convenient for you. The tubes are connected with fittings (angles or tees) and attached to the legs of the chair. The body kit made in this way is foldable, so you can simply take its parts with you and assemble it on site. The advantage of such homemade products is that they can be made to suit every taste. And you won’t have to spend a lot on purchasing store-bought products.

Wooden chair on four legs

This is another option that will help you assemble a folding fishing chair with your own hands. Drawings prepared in advance will allow you to determine the dimensions of the structure and the required amount of materials.

4 blanks are prepared from wooden blocks, which will serve as supports. The two parts are connected to each other by a screw in the center of the legs. You should end up with two pieces that are somewhat reminiscent of scissors. The parts are connected to each other by wooden boards. They will serve as headquarters. They can be replaced with fabric ones.

The lintels are made from below in the form of wooden beams. The chair will not be allowed to crawl.

Procedure

To make a chair for feeder fishing, you should follow the following procedure:

Decide on a chair option for feeder fishing.
Make your own drawings with dimensions, as well as make diagrams of individual parts for better consideration. It is best to do this on drawing paper.
Make a list of materials for your homemade structure. You need to immediately count their number.
Assemble a homemade chair ready for fishing.

It is very important to pay attention to the dimensions, which should be measured both on the sheet and in real life using a construction ruler.

Quality and structure of the fishing chair

The quality of a fishing chair depends on many factors, including its design. In the manufacture of such accessories, lightweight materials are used that are not particularly durable. Other materials, although durable, have a significant weight. In addition, special tools are required for production.

As a rule, the design of a fishing chair comes down to the fact that the design changes from a working position to a transport one. This approach reduces the usable area occupied by the product. Due to the presence of moving elements, the reliability of the structure is significantly reduced. Therefore, the design should be simple and have a minimum of moving joints.

Before you start making a fishing chair, you should carefully calculate everything and, most importantly, decide on its structure. It is also necessary to have basic skills in working with various materials and tools.

Primary requirements

Think about what rules and parameters should be followed when making a fishing chair with your own hands.

Chair weight. It should be no more than a few kilograms. The ideal option is 3 kg. Due to its light weight, the product can be conveniently transported to the fishing spot if you have to travel on foot or by bicycle.
Durability and reliability. If the mass is too small, it is quite difficult to build a structure that does not bend or break under the weight of a sitting fisherman. The use of even such lightweight materials as aluminum pipes and fabric material does not exclude the weight category of the cargo. Without taking into account the mass of a person’s legs, the residual mass of the body (head, neck, torso and arms) will be 50 kg or more. To this you need to add the mass of spinning rod that the fisherman holds, clothes and items that are put in his pockets. Even with a small safety margin, the permissible load on the chair or stool should be at least 120 kg (it is recommended to take a permissible load that is at least twice the actual one).
Mobility. The handmade chair must be foldable. A simple home or garden chair that does not fold during transportation is difficult to deliver to a fishing spot even in a passenger car.
Stability. The chair should not spontaneously fold into operating mode when the fisherman is sitting.
Inability to fall into the ground or sand. In summer, the surface on which the chair rests can be wobbly. As a result, the thin supporting structure can sink quite deeply. Legs or supports should be equipped with plates that create a large contact area with the ground.

In a swamp, such a design, of course, will not save you, but in other situations it will provide additional resistance to the legs going deeper into the ground.

Wooden four-legged stool with backrest

As in the previous version, you can make your own folding fishing chair with a backrest. This will require some modification to the design. And for this you will need the following materials:

Wooden supports (2 pcs.) Length 91 cm.

Wooden supports (2 pcs.) 55 cm long.

Wooden seat supports 31.5 cm long.

Six tables of different seat sizes (40x7, 39x4, 36.5x4, 36.5x4, 31x4, 30x4).
Wooden back (40x0.7 cm).

Crossbars for connecting planks (1 pc. size 39x5 cm and 2 pcs. size 32x3 cm).

Work begins with preparing the supports. Holes for bolts are made on the outside. Grooves 1.1 cm long and deep are made along the path inside. The supports are connected by crossbars. We coat the joints with glue.

To make it more comfortable to sit on a chair, a bevel is made on the bundle of long supports. The sides of the seat are connected to the beams with dowels and screws.

Drawing a drawing

Everyone went to school and remember the descriptive geometry lessons very well. Therefore, there should not be any problems in applying such a simple design. If something doesn't work, you can't draw an actual drawing, but are limited to regular hand drawings of the parts, indicating their actual dimensions.

A drawing or drawing involves drawing a product from three sides: front, side and top. Side and top views are called projections. The main image is considered to be the front view, the side view is considered to be the right side of the main image, and the top view is the bottom of that image. In this case, the side view and top view should not extend beyond the size of the front view. This can be considered a perfectly executed drawing.

It should be noted that the time of graph paper and whatman paper has passed. Currently, they are being replaced by computers on which special programs are installed to automate the design process, including the stage of creating working drawings. Unfortunately, learning how to create projects on a computer requires experience. Therefore, there is no need to worry about such a simple design, since you can get by with regular freehand drawing.

Calculations

In order not to get confused in the drawings, it is necessary to indicate the actual dimensions of all parts.

After all the dimensions have been determined and all the materials have been prepared, you can move on to the main stage - this is the implementation of the idea in practice. To do this, you need to go to the workshop, which can serve as a balcony, shed or garage, where all the tools and materials are stored.

Fishing chair on three legs

There are chairs of this type. Unfortunately, they are used very rarely, since this design is not very stable.

Armchair with backrest

Making such a chair may take much longer and require more effort.

Production technology:

First, the back with legs is assembled, then the second pair of legs along with the seat. Before installation, you must check that all dimensions match, after which you can begin drilling holes for connections. The legs are connected in the same way as in the first case, with the letter “X” using bolts for connection. The holes for the bolts should be drilled a little larger in diameter so that they fit freely. The seat is connected to the front one. The seat is not rigidly attached to the back, but on hinges to create a folding structure. If desired, the armrests can be attached to the seat. Please note that the folding design and armrests may get in the way.

Fishing box chair

As mentioned above, a chair with a drawer consists of a pedestal with an opening top that acts as a seat. This design is made of lightweight materials such as plywood or aluminum. The upper part of the cabinet is covered with artificial leather and foam rubber. First, foam rubber is laid, then it is covered with an artificial lining. This not only makes the chair soft, but also warms the seat. This is especially true in winter.

Description of work stages

It is important to pay attention to the safety of high chairs: Avoid sharp corners, cracks, cracks, cracks, cracks, cracks, gaps between structural elements, as well as unevenness and other defects. To give the top beam an attractive appearance, it can be rounded. The carved rod is designed with all possible patterns in every way, but no sharp corners

The carved rod is designed with all possible patterns in every way, but no sharp corners

To give the top beam an attractive appearance, it can be rounded. The carved rod is designed with all possible patterns in every way, but without any sharp corners.

In this case, the parts are secured with wooden skewers and glue, but other methods such as nails, furniture scales or self-tapping screws can be used.

Read Fishing in the Kaliningrad region

For additional fastening of bolts, you can use through pins (diameter 6-35 mm).

Chair assembly:

Step 2: Attach the front legs, remaining cross members and stems to the structure.

Step 3: Attach the top, cut and middle crossbars to the back legs (attached at the same height as the seat).

Step 4: Use a special tool, a connecting screw, to make sure that all parts are glued together as securely as possible. It is designed in such a way that the parts are located close to each other.

Step 5: Once all the bottom slats and legs are securely attached, attach the two-panel seat to the base of the chair. For added security and durability, secure the panels with pre-drilled pins after the glue has dried. If the seat boards partially protrude from the floor, the protruding ends should be removed with a chisel.

three legged stool

There are chair options that only have 3 legs for support. There are also designs for similar models. A folding chair for fishing with your own hands, assembled and also at minimal cost, will appeal to many. And it's easy to do. You will need the following materials:

3 legs about 60 cm long (consisting of round wooden blocks).

A piece of fabric in the shape of a triangle (for example, thick leather).

Mounting bolt with ring.

The mounting bolt is long.

Washers (3 pcs. fastening and 3 pcs. finishing).

Nuts (2 pcs.).

A hole is drilled in the center of the cut bars. The same holes are made on the upper sections of the beams. You will need these to attach the fabric to the seat. Holes are drilled in the corners of the fabric for them.

The two legs are connected by a long bolt. A bolt with a ring must be placed on the bolt between the legs. With its help the third leg will be fixed.

The fabric is screwed to the upper section of the legs using decorative washers. After this, a strip of fabric is attached, which will make it convenient to carry the chair.

This version of the chair is very light and compact. Unfolds (assembles) without any effort. And the strap makes it easy to carry. Materials for its manufacture are available. The only drawback is convenience. Three legs do not provide the desired stability. And the small seat does not allow you to completely relax. And the duration is questionable. The fabric begins to tear quite quickly in the corners.