Bed in the wall: TOP-200 ideas with photos in the interior 2022

SHARE ON SOCIAL NETWORKS

FacebookTwitterOkGoogle+PinterestVk

A bed built into a closet is not just a modern piece of furniture with a complex mechanism: it is used to create a comfortable space in a limited area. From this article you can learn about the main advantages and disadvantages of such products, study their specifics and structure, and also become familiar with the rules for choosing and placing these structures that are easy to use.

The built-in bed is very convenient when you need to optimize space in a small area

Design features

Beds with raised mattresses, which can be inserted into a closet, mounted on a wall or as a shelf, come in two types: vertical and horizontal.

Horizontals can be single or one and a half. They do not take up the entire height of the cabinet, and the upper shelves can be used for storing things. Such models are good for children and teenagers, as an option for guests.

Vertical folding beds can be any width, from 90 to 210 cm, but require high ceilings. Consider for yourself: a comfortable mattress length is 200-220 cm, more space on the frame, on the cabinet frame. In total, the ceiling height for a 200 cm mattress must be at least 220 cm, and for longer ones - even more.

Also note that a folding or lifting bed is attached to the wall. In this case, the load-bearing capacity of the wall must be sufficient to withstand significant loads that occur when lowering or raising the mattress. Such actions will have to be repeated often to ensure that the wall is reliable (partitions made of plasterboard, as well as walls made of aerated concrete, are not suitable).

The folding bed can be a single bed, a large single bed, or a double bed. The mattress can be foam or spring. Three types of mechanisms are used: springs, pneumatic lifts and remotely controlled electric drives.

Advantages and disadvantages

A folding modern bed that is built into a closet is a convenient device. Thanks to this element, you can fully use the space of the living room or bedroom, which are often cluttered with large products. Advantages of this model:

functionality - due to the presence of a special mechanism, the bed can be unfolded at night and assembled in the form of a cabinet during the day; large size - when folded it has dimensions of 1.4x19 meters, when unfolded it occupies almost 2.5 square meters of the total area of ​​the room; beautiful design - the outside of the cabinet can be decorated to look like wood. If you need stylish models, you can purchase products with patterns, designs, colors and other decorative elements; you don’t need to constantly tuck it in after sleep, just fasten your underwear with special belts and put the place to sleep in the closet; makes cleaning the room easier. No need to constantly crawl under the bed to remove accumulated dust; There are models designed for both one and two; This model can be easily installed in children's rooms. Models available that are designed for small spaces

These elements will be convenient for children, because for a children's room it is important to preserve more free space for play; the base of folding upholstered furniture can be vertical and horizontal; children's products can have beautiful drawings from children's cartoons and other favorite characters; Installing this product allows you to save almost 50-70% of the living room space.

However, in addition to its advantages, this type of cabinet may also have disadvantages:

• high cost - these models have a high cost, which is much higher than the cost of ordinary beds;
• a very problematic installation that requires special care;
• some are afraid to purchase this product because they think that its mechanism may work spontaneously and the structure will simply fall out of the cabinet.

Positive and negative sides

Like any other piece of furniture, a folding bed has its advantages and disadvantages.

The advantages of furniture include:

1. Saving useful space is the main task of a built-in bed. When assembled, the piece of furniture looks like a wardrobe, and at night it turns into a comfortable bed;
2. Variety of Patterns: Furniture designers have come up with different styles and types of similar patterns. It's easy to find an option in a classic vintage style or in a high-tech style. The outside surface of the product is sometimes decorated with mirrors, which visually increase the volume of the room. This is very good for small rooms;
3. Functionality of the product - at the base of a bunk bed, special partitions serve as supports, which turn into shelves when the bed is raised;
4. With a built-in bed, you can change the interior of the room by disassembling and assembling the bed.

Along with the advantages, the product has several disadvantages:

1. The high cost is explained by the installation of expensive lifting mechanisms in the furniture structure. The price of a bed consists of several factors: the material of the product’s construction, upholstery, mattress, installed lifting mechanisms;
2. The need for daily bed transformation;
3. Unreliable lifting mechanism in low-quality models. Some owners of such furniture fear that the bed will collapse at the most inopportune moment - when a person is sleeping;
4. Unlike stationary furniture, you cannot sit on folding furniture at any time. To rest it needs to be disassembled.

Ways to save space when placing beds

When living conditions are limited by the size of the living space, a variety of layouts come to the rescue, making it possible to unload the space as much as possible.

Built-in bed

If there is a lack of free space, bunk bed systems can be a great help for families with children. In some cases, it is convenient to install beds that extend onto podiums.

Podium bed

Very functional folding designs.

The most common models of transforming beds:

• sofa beds;
• tables-beds;
• beds built into wardrobes.

Furniture manufacturers offer many interesting and functional solutions. In one-room apartments it is often simply impossible to do without installing a bed that can be stored in a closet.

Built-in wardrobe bed

Folding bed: types

The desire to sleep on a good bed is understandable and logical - only comfortable sleep allows you to quickly recover. But it is not always possible to install a normal bed. Our apartments are not only not very large, but there are often not enough rooms.

This means you need to make the room multifunctional (combine a living room or office with a bedroom) or accommodate two or more children in one room. So we need to look for a solution. One of them is a folding bed or a folding bed. There are different types, so you can find a solution for every occasion.

Bed built into wardrobe

The bed size for the folding bed built into the closet can be any size from a single bed to a double bed (Euro). There can be two separate beds. The main thing is that there is a place where you can install and secure cabinet furniture (do not forget about the need for rigid and reliable fastening).

There are several ways to make this piece of furniture attractive. After all, a bed built into a closet should look attractive not only when open, but also when folded. The first way: the bed is hidden in the closet, behind the doors. According to the type of execution, doors can be regular hinged or with compartments. Neither is perfect.

The bed, built into a closet with a hinged door when lowered, is almost half covered. Not everyone likes it, and it’s not very accessible.

The second option is a bed built into the closet. Here the situation is better: the headboard in the closet is only 30-40 cm, which practically does not interfere. But there is another drawback: adjacent sections of the cabinet are blocked by a sliding door. That is, while the bed is open, the closet cannot be used.

Only three-door wardrobes are free from this drawback. Three doors sliding on three rails. All of them can be “oriented” in one of the parts. The other two appear to be open. In the case of a built-in folding bed, this is only possible for narrow models. After all, the width of neighboring areas should be slightly wider. That is, the wardrobe itself should be slightly longer than three times the width of the bed.

With a bed width of 120 cm, this is 380 cm and no less. Such a wardrobe cannot be installed anywhere, but if the bed is even wider... The doors are pulled apart and block access to the wardrobe

The third option is the most common. The headboard is crafted to resemble the adjacent wardrobes. The problem here is the legs. They are difficult to hide. Sometimes they stick out like a bee's antennae, which is unsightly.

Some companies make these legs in the form of canopies protruding from the cabinet. Some are ready to put up with such a disadvantage, while for others it is absolutely not suitable.

There is also an option with shelf legs. It is much nicer, but also more expensive, since it has additional mechanisms and stops.

Folding bed

This type of upholstered furniture is in great demand. The main requirement is ease of use of the product. Folding beds in the interior of a small room help create the image of a bedroom combined with a living room or children's room.

The strength of such products is their ability to simultaneously create comfort and save space. Furniture can be folded and disassembled, relieving the interior of congestion. The type of folding bed can be vertical or horizontal. A folding bed provides space for other activities.

In appearance, the folding design is completely different. In stores you can see both budget options and quite expensive things. If for various reasons you still can’t buy furniture, it’s not difficult to do it yourself.

you just need to properly prepare the necessary material and equipment. For installation, the walls must be reliable and durable, made of material that can withstand heavy loads. It cannot be used as a base for installing cots, plasterboard walls or partitions, or light wood walls.

Hidden

The most effective and affordable method of solving the shortage of square meters is the use of a hidden structure inside the apartment. Modern standard beds occupy almost the entire area of ​​the room. For this reason, there is nowhere to place more furniture and simply nowhere for everyday hanging out. A hidden bed solves this problem.

The sleeping place is very quickly hidden in a special niche in the wall. In addition, when assembled, it practically does not differ from the surface of the entire wall or cabinet. The outer side of hidden furniture is matched to the tone and quality of the surrounding material. The wall of the cabinet next to the bed will not be any different, but will look like a single whole.

Designers have developed many practical ideas for creating hidden furniture. For example, when he gets up, the bed turns into a shallow closet with shelves. Or an option when a large mirror is attached to the bottom of the product from the outside, which in a vertical position increases the space of the room.

You can apply a drawing or attach an original image to the surface of the furniture. They will serve as part of the interior decor of the room.

Transformer

A transformable bed that folds into a wall or a closet includes two types of furniture: a functional closet and a comfortable sleeping place. When assembled, the bed does not interfere with anyone and is invisible. If necessary, the structure lowers and opens the bed for sleeping, where you can relax. Also, storage boxes are often added to the design of the bed.

There are models of beds in which, when raised, the bottom turns into a sealed system. Here the shelves can be folded and the hanger holders can be pulled out. After folding, the items on the hanger are neatly placed in a niche under the mattress.

A built-in convertible bed is a good solution to take advantage of the free space in apartments with a small living space. Having decided on the choice of this type of furniture, before purchasing it, you should carefully study the types of transformable furniture products from various manufacturers.

Types of structures and transformation mechanisms

Bed with extra bed

According to the type of mechanism for lifting and unfolding, wardrobe beds have 2 options: gas and spring system:

• Gas shock absorbers have gas inside, which, in turn, presses on the piston, due to this, the bed lowers smoothly and slowly, without the risk of dropping it on itself. Such a wardrobe-bed will please you with its long service life, but the price for such quality is appropriate (you will have to pay a little more than for the above mechanism).
• The design of the spring release mechanism itself is simple and easy to use. The springs are stretched by the weight of the bed, and thus it lowers to the floor. As experienced craftsmen say, such a mechanism will last less than a gas one, since frequent use of the spring causes the curls to weaken and become deformed over time, so such a transformer costs much less.

Based on the design of the folding mechanism, there are vertical folding wardrobe beds and horizontal folding ones:

A vertical folding bed is much more practical and convenient in its functionality. This is due to the fact that during the day it hides in the closet, freeing up a large space for the work area. Very often the closet is equipped with built-in shelves, cabinets or a full-length mirror

It is very important that the wardrobe-bed stands on a flat surface (sometimes you have to level the floor), otherwise, due to skew, the wall-mounted folding mechanism may jam and work poorly

There are improved 3-in-1 models, where there is a closet itself, a small sofa, a prefabricated one with a bed in the middle (or on the side). This option is very practical and functional in that at night there is a full-fledged sleeping bed, and during the day there is a small corner sofa and a large, spacious closet. For very small rooms, a tilt-and-turn or swivel bed is suitable. The principle of operation of such a folding sleeping box is very simple: thanks to special fastenings, you need to turn the main body and pull it out towards you. In the usual assembled state, this is an ordinary cabinet with books or necessary things arranged.

Types of mechanisms

Furniture production does not stop and is constantly developing. Popular models become obsolete over time and are replaced by new ones that are also gaining wide popularity. Beds built into walls and wardrobes have not lost their position for many years and remain in demand. They earned their fame thanks to special mechanisms that allow them to be lifted vertically without much effort.

The lifting device is an important design element of a convertible bed. Thanks to these modules, the entire structure, which weighs several tens of kilograms, can be easily lifted and turned into a vertical fragment of a wardrobe or wall. Several lifting devices are common:

• Manual method;
• Spring mechanism;
• Gas elevator.

The first option is the cheapest, but also the most capricious, requiring periodic adjustments and some effort when lifting furniture. The mechanism does not contain additional springs and shock absorbers; lifting is carried out entirely manually.

The second method is less labor intensive. The spring version already has special shock absorbers in the form of coil springs, which allow you to lift the net without much effort.

The coil springs are made of durable carbon steel wire. The service life of such mechanisms reaches 70 years, and this is with daily transformation of furniture. The only drawback of the device is the appearance of noise during operation. Springs can stretch over time and need to be replaced.

The third option is the most convenient and complex. The operation of the module is based on the action of piston devices filled with compressed air. When changing the position of the folding bed, the lifting mechanism smoothly changes the position of the furniture. In this case, you don’t need to make any special efforts; the device will do everything itself. Gas lift is by far the most expensive of all types of devices.

There are device models equipped with an electric drive with remote control. This is a great way to transform furniture for people with disabilities or those who appreciate all things technological.

The lifting mechanism is the main element of the transforming bed

A standard bed with a berth and an orthopedic mattress weighs on average about 35 kilograms. Raising it on the wall and turning it into a wardrobe, without accessories, is a rather complicated and troublesome process. For this purpose, transformers use special mechanisms that facilitate the process of lifting furniture and allow even a small and fragile girl to perform these actions. To do this, you can use the following elements:

• Separate springs;
• Gas lift;
• Gas spring blocks.

Designers have developed many varieties of such beds in different styles.

The lift-spring type is the most cost-effective and at the same time problematic. Unlike springs, gas systems rise smoothly and do not require much effort or constant adjustments.

By the way, mirrors in the interior visually enlarge the space and are an important element in the design of rooms with a small area.

The hanging system of the bed is also an important nuance.

The hanging system of the bed is also an important nuance. Ball bearings ensure no play, smooth movement of the bed and a silent process. This element is not a mandatory part and is installed at the request of the customer or buyer.

The versatility of the bed allows it to be used, for example, as a shelf for accessories during the day.

Manufacturing materials

The warranty period for such beds varies from 3 to 10 years. This directly depends on the material of manufacture, the reliability of the mechanism and the overall quality of the product. Most often, models are sold without a mattress, so they are purchased separately. The following factors influence the choice:

1. Owner's age. Ideal support and comfort are personalized for each age category.
2. Weight. If the owner weighs more than 90 kg, then he needs to choose an option with greater rigidity.
3. Lifestyle. Professional athletes need a firm mattress. For sedentary people, this factor is not so important.
4. Health. Often a physical condition requires a specific orthotic design that minimizes discomfort.

Mattresses differ not only in the degree of hardness, but also in the type of filler. The option that retracts into the wall most often consists of the following material:

1. Foam rubber. Used as an additional layer - as a base. It is impossible to provide perfect back support.
2. Coconut fiber. Natural filler, optimal for orthopedic mattresses. One of the most expensive goods.
3. Latex. Stretchy and elastic option. Suitable for products with increased rigidity and load capacity.
4. Olofiber. Artificial raw materials with good consumer qualities. Breathable material that remains functional for many years.

Foam rubber

Coconut fiber

Latex

Olofiber

The basis of the furniture is chipboard, natural wood. The frame of transforming beds is also equipped with metal elements. Laminated chipboard or MDF are inferior in quality to natural wood. Plastic facades are becoming increasingly popular due to their appearance and budget cost. For the inside of the product, it is better to choose a functional solution. After harvesting the bed, there should be no empty walls.

An original solution is a seamless mirror or a full-size cabinet with shelves. When choosing, pay attention to the following criteria:

• frame strength;
• warranty period of the mechanism;
• sphere;
• quality of the mattress, if any;
• functionality;
• type of mechanism;
• style of room decoration.

The last factor plays an important role. In an expensive interior, a plastic bed will look out of place. The chromatic range, texture, and quality of the material are reflected in the aesthetic aspect.

Wood

MDF

Chipboard

How to create your own furniture masterpiece

First of all, checking the drawing, you need to cut out all the parts from the chipboard using a jigsaw. The resulting furniture parts can be immediately coated with furniture varnish, or this can be done after the assembly is completed. Experienced craftsmen recommend pre-painting, and after completing the assembly, use only polish.

In process and production

Assembly

The parts are ready, now you can connect them together:

First, the cabinet box is assembled. The side, top and bottom parts are connected to each other with self-tapping screws (it is recommended to lubricate the joints with any wood glue to enhance strength). The resulting box in the corners is reinforced with corners. Now you should take care of the height above the floor. A low cabinet height will force the mattress to be anchored too low and the bed will not be very comfortable. The resulting structure is attached to the wall using dowels. The fastening must be as strong as possible, because the frame with the mattress is quite heavy

It is very important that the frame is set strictly at level; misalignment when installed to the wall will cause a malfunction in the operation of the lifting mechanism. If mezzanines or side tables are planned, they are assembled and installed at this stage. The doors are now being installed

This can be done at the final stage, but craftsmen recommend installing them before the lifting mechanism is installed - this makes it easier to tighten the door hardware bolts and adjust the doors to open smoothly. If the furniture has not yet been painted, now you need to varnish it. Next, the bed frame is assembled (you can use a ready-made one from an old bed, making additional sides for it). The frame must have sides, a headboard and provide for the possibility of rigidly securing the mattress. Externally, the frame looks like a box with blank sides, the bottom of which consists of lamellas. The frame is also varnished; folding or retractable legs are installed on it in the foot part.

Installation of the lifting mechanism

The most crucial moment. Extreme precision is required here, otherwise lifting the bed will require significant effort. Before installing the selected lifting device, you must carefully read the attached installation instructions. But there are several general rules for installing all lifts:

• First, the parts of the lift are attached to the surface of the cabinet, and then to the frame. The height of fastening the parts is calculated as follows: subtract the height of the cabinet legs from the height of the bed legs, put the resulting size on the inside of the furniture, and the depth will depend on the thickness of the mattress.
• Do not attach the lift parts to all the screws at once. Beginners may have problems with level installation and will have to rearrange the fasteners. It is recommended to secure the structure onto 4 furniture corners and try folding and unfolding the empty frame several times and closing the doors. If everything works without effort and nothing prevents the doors from closing, then you can tighten the remaining screws.

Decoration

Handles are installed on the cabinet doors and decorative trims are glued. It is recommended to hide the screws on the outer surface under the decorative trim.

The resulting product is coated with polish. After installing the mattress with bedding, it can be used for sleeping.

The tutorial on how to make a bed that folds up against the wall is simple. The most critical stage in it is only the adjustment of the lift parts for its smooth operation, but this can also be dealt with if you follow the installation instructions. But upon completion of the work, you can get significant space savings due to the retractable bed and beautiful furniture in the interior.

Product dimensions

The width of the standard model of bedroom furniture ranges from 39 to 70 cm; for double beds it reaches two meters or more. Traditionally, products are characterized by the following dimensions:

• single bed - 80 × 180, 90 × 200 cm;
• one and a half - 120 × 180, 140 × 200 cm;
• double - 160 × 190, 180 × 200 cm.

Classic vertical models of standard size are suitable for small apartments, where assembled functionality is no less important. Horizontal ones are often designed in the form of chests of drawers, which are less functional. The size is selected based on the user’s weight (the wider the bed, the greater the load capacity) and height.

The parameters may be affected by the square of the room. The bed should be placed against the wall, not against the side walls. The owner should walk freely on both sides, linen drawers should slide out easily, and the furniture itself should rise and fall without touching foreign objects.

A bed with a lifting mechanism does not hide the space in the apartment; it allows you to create a functional work area. Thanks to the design features of modern models, you can rationally organize space.

Additional drawers, compartments for linen, and storage systems will be a pleasant bonus. When choosing, it is important to consider the durability of the mechanism, the quality of the product itself and the permissible load capacity.

Assembly sequence

This process can be divided into 2 main stages: assembling the frame (cabinet) and making the stock.

Stage 1. Drill the prepared chipboard parts under the confirmations so that the sidewalls are the external parts, and the ends and stiffeners are the internal ones. To do this, holes are drilled in the sidewalls in the plane of the parts with an 8 mm drill, at a distance of 9 mm from the end cuts (for the upper and lower parts) and at the same distance from the rear long side in the places where the stiffeners are attached.

Immediately install the resulting structure in the designated place. Fastening to the wall is carried out using anchor bolts using reinforced corners 60x60 mm. When installing with a level, check the verticality of the structure. Strengthen parts of the lifting mechanism inside the box. Fastening is done using self-tapping screws.

Wardrobe-bed diagram.

Stage 2. The key to successful manufacturing of this part of the structure will be the accurate measurement and adjustment of its parts. The width of the mattress binding must be provided in advance so that its surface is slightly higher than the frame boards.

Assembling the mattress box is carried out according to the same principle as for the cabinet. Holes for confirmations are drilled in the planes of the side boards and at the ends of the head and foot of the bed. The bottom of the box can be made from a furniture facade or laminated chipboard. The lower, reverse side of the bottom will serve as the facade of the wardrobe-bed when assembled. Here you can strengthen a small shelf for souvenirs, handles so that the folding bed can be conveniently unfolded, and decorative fittings that will make the panel resemble the front of a cabinet.

On the outer surfaces of the sidewalls, in marked places, the mating parts of the lifting mechanism should be installed on self-tapping screws. Attach the folding legs according to their design. Connect the parts of the lifting mechanism and place the mattress on the bed.

After this, you need to adjust the bed with a lifting mechanism so that in working condition its legs are on the floor. To do this, the bed with the mattress is placed in the sleeping position. If it does not lower enough and the legs hang without support on the floor, then a board or chipboard of suitable size and weight is additionally reinforced under the mattress so that the folding bed can be folded out completely under its own weight.

When installing a home-made bed, the main attention should be paid to securely fastening the box to the wall. You should not skimp on fasteners, since when using a mechanism with gas springs, the force of their compression can tear out a box that is not firmly installed and lead to injury to a person on the stock

Photos of built-in beds in the interior of rooms

Photos of examples of using a bed in the wall in different rooms.

To the living room

In the hall, a bedroom built into a closet or shelving is an excellent solution for rational use of usable space.

In the bedroom

Due to the huge number of varieties and different characteristics of furniture, it is especially effective to place a built-in model for adults inside the bedroom and significantly save every square meter during the day.

To the nursery

For a small nursery for a schoolchild, a boy or a girl, a multifunctional bed built into a closet or set with an add-on, shelves, drawers and a workplace is perfect. In a room for two, a two-story wall structure would be appropriate, which can also be equipped with a desk or a two-seater model with a second pull-out level under the first.

Cabinet

A bed in an office is probably not the most popular use for convertible furniture in living spaces, but it is quite common in very spacious homes. Sometimes, when working for a long time, it is more convenient to spend the night in the office than to come to the bedroom, risking waking up the family.

The bed is integrated into the closet, which fits perfectly into the overall picture of the room. This could be part of a bookcase or an imitation surface for a painting or panel.

In offices, horizontal models of transformable beds are often used. They are compact, designed for sleeping space, require less usable space and can fit seamlessly into home office furniture solutions.

But in some cases, installing a vertical folding bed is justified. Here is an example of using a vertical bed built into a built-in wardrobe with smooth fronts.

To the balcony

For a loggia, this option looks quite interesting and practical. When assembled, the structure can be a closet or other storage system, and when disassembled it can become an excellent sleeping place for a good rest.

Auxiliary room

In private homes or large apartments, the folding bed can also be integrated into a closet located in a utility room - hallway, hallway, space near the stairs and even in the laundry room. This option for arranging a bed is suitable for occasional use by late guests.

Indeed, very often homeowners do not have the opportunity to allocate a separate room for receiving guests, because it is obvious that most of the time the room will not be used.

Pros and cons of furniture

The advantages of furniture of this type are:

• practicality and convenience
• various variations of design solutions
• simplicity and ease of use
• space saving
• the ability to hide the sleeping place from strangers if necessary
• These beds do not need to be constantly laid out and made
• such a design solution can easily be afforded by a family with an average income

• unreliability of the design if purchased from a low-quality manufacturer
• If used carelessly, such beds often fail
• folding and unfolding the bed every day (although this takes a few seconds)

Design of beds that retract into the wall

A murphy bed can easily become the focal point of a room. To create a similar effect, it is advisable to use bright colors and spectacular decorative elements. For example, cabinet doors can be decorated with carvings, paintings, photo prints and mirrors, which in turn will further increase the area of ​​the room, or decorated with glass inserts with polished patterns applied.

In addition, a niche in the wall of a folding model can be decorated with wallpaper with a colorful and original print, soft panels, lighting, natural finishing materials or their imitation.

Wardrobe bed ideas in different styles

This folding wall structure will look good in a variety of design styles, such as minimalism, hi-tech, loft or modern. For example, wood products will become a harmonious element of vintage Provence, rustic country or classic style.

Tips for choosing beds

Basic recommendations for selection:

• When purchasing this product, first of all you need to make sure that it is safe so that the bed does not break during sleep or fall out during assembly.
• For a small space, a bed in the wall with a vertical folding mechanism is best.
• When choosing a design for a children's room, special attention should be paid to the fastening and transformation mechanism. It is better to give preference to gas lift, since, unlike springs, it will not lose elasticity.
• When choosing a nightstand, it is advisable to choose a bed with a solid base, and not on separate legs.

Where is the best place to order and what to pay attention to

Like most other furniture, a built-in folding bed can be ordered from a private owner or from a factory or furniture workshop. In this case, it is better to order from a place where the production of such furniture is not one-time, but pre-production.

The fact is that for each order you need to select your own mechanism. If you choose the wrong one, the bed will be difficult to lift or may rise spontaneously. Both options bring little joy, but the second is much worse, as it can lead to injury.

Shelves are optional but allow for fuller use of space.

When choosing a manufacturer or buying a ready-made option, ask about the warranty on furniture. It is normal that the furniture itself is given a warranty period of at least 1.5 years, and the mechanism is given a warranty period of at least 5 years. Also inspect the locking system in the closed position, check how easily the mechanism operates.

If you choose a folding bed built into a closet, pay attention to the appearance of the closet when closed. After all, during the day it will remain in this form and should look good. You can also see that the bed frame is not much larger than the mattress. A bed with a frame protruding 10 cm beyond the mattress is very uncomfortable and risks permanent bruises.

How to choose the right bed front

The body of a transforming bed is usually made of MDF or laminated chipboard that imitates natural wood. Natural wood is used as one of the elements of lifting beds, as it significantly increases the weight of the structure, so it is important to use reinforced lifting mechanisms. Using natural wood to make the body or facade of furniture significantly increases its cost, since wood is an expensive material that requires the use of expensive mechanical elements and fittings. Agree, a bed-cabinet made of natural wood with cheap accessories looks uncomfortable and strange.

Every day it is necessary to assemble, fill and disassemble the bed-wardrobe.

The body of a transforming bed is usually made of MDF or laminated chipboard that imitates natural wood.

Today, plastic facades, as well as mirror and combined ones, are widely used. This finishing material can be used in any modern interior. Particular attention should be paid to the mirror facade. Mirrors visually enlarge the space, making it larger and lighter. You can also decorate it with matte or colored designs, photo printing or sandblasting.

Psychological discomfort.

This type of facade should be chosen in accordance with the overall interior of the room for a harmonious combination.

Even if you choose the cheapest mechanism, the cost of the finished product will be several times higher than the price of a classic bed model.

Agree, a bed-cabinet made of natural wood with cheap accessories looks uncomfortable and strange.

DIY bed in the wall

Not everyone can afford professional installation of such a mechanism, but this does not mean that one should abandon an interesting idea. It is quite possible to assemble such a bed at home.

Step 1. The first step is to assemble the frame of the future bed. To do this, it is recommended to use self-tapping screws and glue. In order for the self-tapping screws to hold the structure as effectively as possible, it is necessary to properly prepare the surface.

Step 2. In order for the bed to work for a long time, it is necessary to strengthen the box with crossbars, securing the lower part to the bottom.

Step 3. Next, we perform a similar operation with the front wall of the future bed.

Step 4. Attach the decorative parts to the side walls using glue and self-tapping screws, keeping the level. You can use a special tool for this.

Step 5. Using standard fastening methods, you need to strengthen the back of the box. It should be taken into account that the ends of the “ceiling” equally protrude beyond the edges.

Step 6. Next, the front part of the lining is fixed, similar to the previous one. But it is necessary to take into account that there is 2.5 - 3 cm left on the sides.

Step 7. The next step is to create a box for the future mattress. To do this, you need to connect the side walls, which are made from the cut of the board, and attach them to the bottom of the plywood. You can use a saw or jigsaw to cut products.

Step 8. Next comes the creative stage of work, that is, creating a mock-up of the side, which will be visible when assembling the bed. Decorative elements are attached using glue or nails with decorative plugs.

Step 9: Magnetic devices can be used to secure the bed. It is worth paying special attention to this stage, as these supports prevent the bed from falling out during assembly. In addition to magnets, various types of loops can be used.

Step 10. After completing the previous stages of work, the stage of decorating the bed is carried out, for example, painting the surface.

Step 11. At the end of the work, the box is fixed by screwing screws or an elastic but durable strip is attached.

Self-installation

A folding bed can be installed by professionals who assemble furniture. But this is usually not cheap, and if the owner has the necessary tools and basic skills, you can install the bed yourself. Assembly instructions are included with each bed purchased by the manufacturer.

The sleeping place has three main structural components, the fastening of which requires special attention. The base, which is fixedly fixed to the wall, must be very strong, since the hinges and the bed are heavy

A fixed base is attached to all surfaces: walls, floor and ceiling. It looks like a hollow niche.

Nuances of self-installation

Installing a transformable bed has some nuances:

1. The vertical plane on which the structure is fixed must be very strong, with a thickness of at least 2 bricks. If the wall is plasterboard, the fasteners must be long so that they pass through the plasterboard and the concrete and brick wall to which they will be attached. If the fastening is not done securely, the box may come off the wall at the most inopportune moment and lead to injury to people.
2. If the furniture is made of chipboard, it is better to strengthen the base with metal corners or wooden boards. Mainly the vertical pillars of the box are strengthened.
3. To securely fasten a bulky structure, you need to ensure that all surfaces are smooth, without distortions. In some cases, before installation, you need to level the floor and walls so that the bed stands securely.

Sometimes they make the built-in stock themselves. If it is not difficult to make the box and the sleeping place itself, then the lifting device must be reliable, and it is advisable to purchase it from the manufacturer. A self-made mechanism is not always reliable, and since the bed structure is heavy, it can cause many injuries if it falls. The structure should be lifted and secured with ease and fixed for the required period of time.

Securing the mattress

The frame for the sleeping place itself can be made independently from metal corners, chipboard or plywood. To prevent the mattress from slipping when the bed is folded, you need to make a small edge along the edge or secure it with slings and belts. The mattress should fit tightly to the frame. If necessary, it should be easy to remove. Materials should be light and durable.

Photo