Do-it-yourself fishing chair: folding and with a back, drawings

Fishermen have to wait a long time for a bite, so many take a folding chair with them. This simple accessory allows you to relax and enjoy the process. Modern manufacturers offer a wide range of special equipment. However, making a fishing chair with a backrest with your own hands is not so difficult, following the step-by-step recommendations of experts.

When fishing while standing or sitting on a mat, your back and legs become numb

What to look for when choosing a fishing chair?

The main indicators that you need to pay attention to first:

Strength. How much weight can it bear?
Weight. Fishermen often have to get to their fishing spot on foot, and they always want to get rid of extra pounds of carrying weight.
Sustainability. There are no perfectly flat surfaces when fishing, so the chair must maintain a vertical position in all situations and not fall along with the fisherman during any movement.
Compactness. An important factor when transporting and carrying.
Stay on the surface. Some structures, for example, with tubular legs, are pressed under the weight of the fisherman into a soft surface, such as sand, black soil, etc. For such cases, legs with a larger area of contact with the ground are more suitable.

Convenience and comfort

All chair models offer their own level of comfort for which they are designed. This should be taken into account when choosing, since if you plan to go on long fishing trips, when you need to rest and relax, then perhaps you should choose a chair with a back and armrests, or a folding chair. When you can lean back and take a nap for an hour.

You can complement the chair with the necessary attributes that will be very useful during fishing. For example, install a holder for a fishing rod, you no longer have to cut rods from branches, install a fish bag, a table for changing bait, a sun umbrella, and footrests.

In fact, there are a lot of options on how to equip your fishing spot. If you approach this wisely, the process of fishing will be much more enjoyable.

Material

The main materials for making chairs are the following materials:

Tree.
Plastic.
Metal.

Chairs are mostly made from wood independently. One of the most affordable materials that can be easily processed. Such chairs are strong, reliable and durable.

Let's celebrate! In production, they prefer to use tubes made of plastic or metal. Such a design may even be inferior to wood in some respects. It all depends on the quality of the material, its strength and elasticity. If the material bends in your hands, then you should not hope that it will be able to withstand more than 80 kg of live weight.

Dimensions

Overall dimensions of compact chairs (LxWxH): 320x410x432 mm;
Overall dimensions of chairs with back (LxWxH): 410x450x735 mm;
Overall dimensions of the seats (LxWxH): 741x600x380/740 mm.

Additional options

In order to make a fisherman’s vacation more comfortable, various manufacturing companies offer their clients many additional options. How useful they are, of course, is up to the fisherman to decide.

Let's mention only the most popular ones:

Back.
Rod holder.
Shelf or table;
Bag or container for fish.

They really simplify the fishing process and make it more comfortable.

Options and drawings of folding chairs for fishing

Before making a folding chair for fishing yourself, select a convenient or simple option and draw a sketch. The required dimensions are applied to the drawing. Experts consider the following designs to be the most convenient:

lounge chair; If you plan to go fishing for several days, a convenient folding one will allow you to stretch your legs
folding chair; A chair with a back and armrests allows you to avoid straining the muscles of your back and legs
box-chair; The design allows you to store fishing equipment and sit at the same time, suitable for short-term fishing
simple folding chair;

The model's light weight and small dimensions make it easy to transport

Once the design has been determined, they move on to detailing in the drawing. Correct calculation will make the summer fishing chair comfortable.

Simple folding chairs are made from wooden slats, plastic or metal pipes Attention! All dimensions are indicated on the drawing. If necessary, draw the component parts separately for clarity. A detailed drawing allows you to more accurately calculate the amount of material required

To draw a sketch, no special skills are required. It is enough to schematically designate the design and calculate the consumables.

Simple chair models are easy for an inexperienced craftsman to make with his own hands

Manufacturing stages

Taking into account your own skills in making products from different materials, as well as personal wishes, you can build your own chairs for feeder fishing of varying complexity.

Simple model

To make the simplest model of a feeder chair, you will need three interlocking metal pipes with a diameter of 20 mm, material for the seat and back, strong threads, 4 bolts and nuts. Necessary tools: electric drill, hacksaw, grinder. Manufacturing technology:

The short sides of the seat are stitched with two wide strips and secured at the bottom with a limiter made of a thin strip. In this case, the fabric is sewn directly onto 2 metal pipes, which will serve as the legs of the chair. The material on the back is also stitched along the short sides.
At the junction of the legs, holes are drilled in the middle of the long sides and connected crosswise to the fasteners.
A pipe is attached to one of the legs, which will serve as a backrest.

With adjustable legs and backrest

A chair with a back is a more complicated version of a feeder chair. Material required to assemble such a chair: steel pipe for the frame with a diameter of 20 mm, fastenings (bolts, nuts), textiles for the seat and back, threads, rubber nozzles for the legs, anti-corrosion compound. The tools used are the same as for the simple model. Assembly algorithm:

The metal pipe is cut into several parts: for the legs and seat - 8 pieces of 55 cm, for the back - two pieces of 70 cm, one piece - 30 cm.
On two pipes, which are intended for sitting, two fasteners are installed at a distance of 6 cm from the beginning and end.
Another fastener is attached to one of these pipes, with which the back will be mounted. The fastener is located at a distance of 9 cm from the beginning of the pipe.
To complete the manufacture of the chair frame, the prepared corrugated pipes with fasteners are connected by two more pipes. Thus, 4 metal pieces measuring 55 cm were used.
Pipes measuring 70 cm prepared for the backrest are connected to a pipe 30 cm long using fasteners.
The remaining four 55 cm pieces, which will serve as legs, are attached to the ends of the frame tubes. They are equipped with rubber nozzles.
At the last stage of making the chair, textiles are stretched over the seat and back. Holes are made on the short sides of the tarpaulin, and the material is pulled together using an elastic band. The elastic will allow the seat to sag a little under the weight of the angler. The back textile is pulled together along the long sides.

Made from polypropylene pipes

A simple option for making a feeder chair, for which you will need: PVC pipes with a diameter of 25-32 mm, fittings connecting the parts of the chair, durable textiles for the seat, fasteners, threads. Tools for assembly: pipe cutting scissors or a hacksaw, soldering iron. A guide on how to make a fishing chair from polypropylene pipes with your own hands:

The tube is cut into pieces: 16 parts for the back, legs, and seat, the length of which you can choose yourself.
We connect the pipe sections with fittings. For convenience, assembly should begin from the back, then the seat and handles are fastened together.
For the seat and back, take material that is stitched along the short sides with holes for inserting pipes.
After checking the structure for stability, it is disassembled, the material is stretched onto the appropriate sections of pipes.
At the final stage of assembly, the parts are soldered or secured with glue.

Read The best spinners for pike and how to make a choice

Folding chair

To assemble a folding chair, you will need a polypropylene pipe with a diameter of 25 mm, fittings, material for the seat, threads, 2 bolts, 2 nuts. Guide on how to make a folding chair:

The fabric is cut to a size of 18 cm. It is stitched along the short sides so as to create holes into which the pipes will be inserted.
The pipe is cut into pieces: 4 pieces of 40 cm and 4 pieces of 20 cm.
Long pipes have holes drilled in the middle for bolting.
Short 20 cm sections of pipe are inserted into the prepared fabric. Corners are put on the ends.
2 rectangles are formed from all pipe sections measuring 20 x 40 cm. They must be connected with fabric.
The rectangles are connected to each other with bolts and nuts in the drilled places. It is not recommended to tighten the nuts too tightly so that the chair folds effortlessly.

For structural strength, glue or welding can be used in the places where the fittings are attached. This folding fishing chair will serve for a long time thanks to the material from which it is made, it will be easy to carry, and the chair will not take up much space in your backpack.

Fishing backpack chair

A universal model can be considered a model of a backpack with a chair. This backpack will be an ideal companion on any trip.

It is characterized by the reliability of prefabricated fastenings, as well as a universal aluminum frame in the assembly. Such a chair is not only an opportunity to sit comfortably in nature, but also to carry the necessary things over a long distance.

Its mesh pockets can hold everything you need. The fishing line, fishing rod, and bait are placed here. This backpack is a guarantee that your fishing gear will always be at hand.

QUALITY AND CONSTRUCTION OF A FISHING CHAIR

The most common options for chairs of this type are options with and without backrest.

A stool without a back is simpler to make and less expensive in terms of material, however, the first option is much more convenient to use. The back of the chair can be made of wood, that is, the product will be of one-piece construction, or the seat and back are made of durable fabric that is stretched over the base frame.
You can also divide chairs according to the type of legs - they can be straight, crossed or solid. The material for the chair can be metal, plastic or wood. Making metal or plastic chairs will require special tools and skills, so making them yourself can be quite difficult.
The option with a wooden chair is the simplest, thanks to the wide range of materials, their affordable price and the ease of use of wood.

At first glance, the drawing of this object rather resembles a Rubik's cube, and it is not at all clear how one can build something following it.

However, the finished chair suggests a slightly different thought - everything ingenious is simple.

Remember that the middle bars are placed in the same way as the outer, wide ones.

A folding chair, as a rule, consists of 2 planes connected by hinges, as well as a device that regulates the angle of the backrest. Basically, the seat and backrest are made in the form of a frame, made of light metal, on which fabric is stretched, according to the principle of the well-known folding bed. By the way, if you try, you can make a fishing chair from an old folding bed at a minimum cost.
Box chair. The simplest design consists of a cabinet of a certain height (about 40 cm), on top of which a soft seat is mounted. It also serves as the top cover of the cabinet and has the ability to open. Fishing accessories and fish are stored inside the cabinet.

Chair with back and armrests. It can be made either folding or solid, but a minibus is needed to transport it, since it will not fit in a regular car. The one-piece version is highly reliable, but you have to pay for it with useful space. The most suitable option is a folding chair. To make such a chair you will have to work hard. For the manufacture of such a structure, lightweight materials should also be used, but with acceptable strength.
Chair-lounger. The most complex design, the manufacture of which will require a lot of personal time and money. In this case, you will also have to give preference to the folding option. In any case, this is the most suitable option. Its operating principle is similar to a folding chair. It can also be made from 2 folding parts. The only difference is that the parts are made, for example, from plywood and upholstered with soft material. Therefore, this design may take up more space, but it is somewhat more reliable.

Folding chair - consists of a seat and backrest connected by a hinge.
Armchair with backrest. Models of this design are either solid or folding. A folding fishing chair is more mobile and can easily fit in a backpack, while a solid product is considered more durable.
Lounge chair. Chairs of this design, in turn, are divided into prefabricated, solid, and folding.
Armchair with shelves. The main feature of the model is special devices for placing gear and other fishing accessories on it.

The easiest option to make with your own hands is a folding bed; it can be made from any materials with the least amount of money and time; a lounge chair is a more complex design.

Folding bed With backrest With shelves

This is interesting: Slingshot for fishing - how to make it yourself, popular brand models

What is a fishing chair?

A fishing chair is a structure made of a seat and folding supports. Such fishing accessories are usually made of lightweight material and are compact in size. This allows you to take them with you, even if you go to a river or pond on foot with a backpack.

You can buy it in a store or make it yourself, especially since it is not at all difficult.

It is worth considering that the more comfort you demand from a fishing chair, the more bulky the design you will get. Since one of the main requirements for such a chair is a minimum of occupied space when folded, the design contains many moving joints and this has a bad effect on the reliability of the product.

For lovers of classic fishing, using a regular fishing rod or feeder, a chair is a must.

Chair-lounger

A lounge chair is a rather bulky design, the use of which is appropriate if you are going fishing not for one day, but for a long period. One of the advantages of such a product, as the name suggests, is that the chair has a back that can be fixed in a lying, semi-lying and sitting position. This allows the fisherman to fully rest during the day, when the bite usually stops.

Many anglers take similar structures with them if fishing is planned for a long period.

Armchair with backrest

This model is less bulky and weighs less than the previous one. The chair allows you to relax your back when sitting for a long time, so it is very popular among older fishermen.

This is quite a useful thing, because it allows you to relax your back, which is important, especially for older anglers.

Box chair

The box chair has no back and is heavy. However, its advantage is that it can be used not only as a seat, but also as a backpack. Fishermen store and transport all fishing gear and accessories in it. The catch is also placed there. Due to its considerable weight, this model is practically not used in the summer. But lovers of winter fishing appreciated all the advantages of this model and consider it an indispensable thing that every fisherman should have.

This design has a number of advantages compared to other models, since you can not only sit on it, but also store fishing equipment, as well as caught fish.

Regular folding chair

The simplest model, which consists of two side legs connected crosswise, and fabric stretched between their edges. The main advantages are, firstly, compactness, and secondly, low weight, which is achieved through the use of lightweight materials in manufacturing. In fishing stores, such chairs are presented in a large assortment, so it is not difficult to choose a folding chair that suits your height.

Naturally, such a chair does not have the necessary level of comfort, but it has many advantages.

Description of work stages

It is important to pay attention to the safety of high chairs: Avoid sharp corners, cracks, cracks, cracks, cracks, cracks, gaps between structural elements, as well as unevenness and other defects. To give the top beam an attractive appearance, it can be rounded. The carved rod is designed with all possible patterns in every way, but no sharp corners

The carved rod is designed with all possible patterns in every way, but no sharp corners

To give the top beam an attractive appearance, it can be rounded. The carved rod is designed with all possible patterns in every way, but without any sharp corners.

In this case, the parts are secured with wooden skewers and glue, but other methods such as nails, furniture scales or self-tapping screws can be used.

Read Fishing in the Kaliningrad region

For additional fastening of bolts, you can use through pins (diameter 6-35 mm).

Chair assembly:

Step 2: Attach the front legs, remaining cross members and stems to the structure.

Step 3: Attach the top, cut and middle crossbars to the back legs (attached at the same height as the seat).

Step 4: Use a special tool, a connecting screw, to make sure that all parts are glued together as securely as possible. It is designed in such a way that the parts are located close to each other.

Step 5: Once all the bottom slats and legs are securely attached, attach the two-panel seat to the base of the chair. For added security and durability, secure the panels with pre-drilled pins after the glue has dried. If the seat boards partially protrude from the floor, the protruding ends should be removed with a chisel.

DIY feeder chair. Part 1

Having seen it one day at a neighbor's place on the ice, an ice fishing enthusiast becomes eager to have his own comfortable feeder chair. But the cost of even the simplest seats for winter fishing in ruble terms is now so substantial (from 7,000 rubles without body kit!) that if a person does not have a significant amount of free money, it is impossible to justify the purchase by any catches or desire for convenience.

Tools in your hands!

It is quite possible to get a comfortable and reliable seat for feeder fishing without breaking another hole in the family budget - you can make it yourself at home. To perform this work, no special skills of a locksmith or a master of sewing on a sewing machine are required.

Everything can be done by a person with average abilities to design and make something; all he needs to do is be determined and stubborn.

After the design of the fishing chair has been thought out, the necessary sketches and outlines have been made, it is necessary to calculate the amount of materials.

If the dimensions of the product are approximately one and a half meters in height and half a meter in width, then you will need materials that can partly be bought in a store, and partly found at home.

It is difficult to choose a more suitable material for the frame of a future chair than a profile pipe. The main advantages of this material:

cheapness;
high strength;
weldability;
ease of machining.

Necessary materials

Materials from which most homemade feeder chairs of simple designs are made:

pieces of plywood 8 mm thick;
steel pipes with a diameter of 20-25 mm with walls whose thickness is not less than 1.5 mm, cutting elements from these pipes for one chair will be: 55 cm - 4 pieces, 70 cm - 2 pieces, 30 cm - 1 piece;
pieces of fabric with foam padding for covering the seat and back: 800x400 mm – 1 piece; 700x400 mm – 1 piece;
bolts with nuts and wings of various lengths for assembling legs, seat and back;
furniture bolts for connecting the seat to the back;
steel plate for thrust bearings 3 mm thick;
staples for a construction stapler 6 mm;
primer and dye for processing the chair frame - in the minimum volume available on the sales counter.

For the feeder, the size of the seat-chair of the universal version is almost the same - 1.5x0.5 m. The given quantities and sizes of elements are based on a simple version without side armrests and an additional shelf for the legs.

If the craftsman considers these elements of the chair to be useful, then he will additionally need the materials of the listed nomenclature, but in a different quantity. Drawings of do-it-yourself corrugated pipe seats can be found in abundance on fishing equipment websites.

Foldable design

One of the most successful designs is a feeder chair with insulated foam upholstery. To stick foam rubber onto plywood, you will need titanium glue, and it is more convenient to prime and paint the finished frame using spray cans. It is better to choose a matte black paint color.

An important detail is that the chair for winter fishing must be foldable, since it will constantly have to be transported, carried, moved every time you go fishing.

It is permissible to make all frame elements from a round aluminum pipe of sufficient strength, in which case the chair will be much lighter. But welding aluminum at home is problematic.

Popular search queries for video clips on the Internet are: “Do-it-yourself feeder chair”, “Make your own feeder chair”, “Chair for a winter feeder”.

Plastic fishing stool

Since wood is extremely afraid of water, some prefer to use another material - almost weightless plastic, which, moreover, does not tolerate any moisture. To build a lightweight structure you need to prepare:

pieces of plastic pipes - 4 x 350 mm, the same number of 500 mm;
plastic corners;
thick fabric;
fastening: bolts with nuts.

Long elements are connected in pairs in the middle crosswise using bolts. They are not tightened tightly, otherwise the structure will be difficult to fold. Corners are attached to the ends of the tubes, into which short elements are then inserted.

After receiving the frame, a piece of suitable size is cut out of the material for the seat. It is sewn on a machine, the seat is put on the upper elements, dismantling one of the sides. To secure the legs, a narrow strip of the same fabric is sewn at the bottom. Those who wish can also provide it with a backrest, making it in the same way. It is rigidly mounted to the top of the stool - to the frame of the front legs. The chair is made from metal pipes in the same way.

Algorithm

Many fishermen use the following pattern for making a chair:

cut the plastic tube into 8 separate parts. 4 of their parts should be 50 cm long. The rest can be up to 35 cm in size;
A canvas is prepared from a prepared piece of tarpaulin, which then serves as a seat. The other part of the tarpaulin usually serves as a kind of jumper in the design of the high chair. The width and length of these parts are measured in advance;
then you need to connect the two tubes crosswise. All structural elements are secured with bolts;
in the upper area and lower area, the components of the high chair are secured using plastic corners.

Thus, the frame can be called ready. Next, you need to take several pieces of tarpaulin and hang them around the structure.

Note!

Features of catching carp in winter.
Balancer for perch: fishing technique and basic tactics for using the balancer (90 photos)
How to choose bed linen - instructions for beginners

A thin strip of fabric should be attached to the lower elements of the support. It will serve as an excellent limiter. A homemade model is not only a cheaper option, but also an opportunity to show your creative inclinations.

Photos of a fishing chair perfectly illustrate how beautiful and versatile it is possible to make a chair. Lovers of fresh air and pleasant time with friends will always appreciate this piece of furniture with flattering reviews.

Primary requirements

Interesting fishing spots are often located in very inaccessible regions and remote from civilization. This imposes certain additional requirements on all equipment. And city fishing, in the absence of a personal vehicle, forces you to be more careful in choosing gear and additional equipment.

Read: Catching asp in autumn and selecting the best baits

Typically, homemade fishing chairs, chairs and platforms require:

Sufficient strength. Tourist and fishing furniture must have a sufficient margin of safety in order to withstand the weight of the owner and additional body kit. And it should also be taken into account that the load increases significantly at the time of casting.
Sustainability. Fishing places are rarely convenient for the arrangement of chairs or armchairs. And when fishing and recasting, the unstable structure can simply fall back or to one side. Sand, clay soil, viscous silt, stones and other options require stability, as well as, ideally, adjustable length of the legs, which will allow you to set your place exactly, regardless of the terrain.
As compact as possible in transport position. The space in the trunk of a car is not unlimited, and if you do not have your own vehicle and you have to use public transport to get to the fishing point, then this parameter becomes even more important.
As little mass as possible. This parameter does not fit well with the requirements for the greatest possible strength, since the only way out is to use lighter materials, which sometimes comes at the expense of strength characteristics.
Availability of materials. If you need to buy only a few parts in a hardware or other store to make a chair or armchair, that’s one thing, but it’s a completely different matter if you need to buy all the materials and tools for the job. In the latter case, a more rational solution would be to buy a ready-made chair in a fishing store.
Ease of manufacture. If the design requires any special, advanced skills in working with wood or metals, then this is not the most suitable option. Ideally, such furniture should be made in a few hours.

Important! The sizes of chairs or armchairs must be selected taking into account the volume of possible clothing. Few people limit themselves only to summer fishing, and fishing in the fall or spring often requires more than one layer of warm clothing

Tourist and fishing furniture must take into account the possibility of accommodating such additional volume.

Master class on sewing a chair cover

Sewing a chair bag looks complicated. With some research and a little patience and work, even a beginner can handle this task.

The success of the event is determined by the configuration of the department and the complexity of the reference model. It's best to start with a simple chair and inexpensive fabric.

Let's look at the step-by-step process of sewing upholstery on a chair with a rectangular back and seat with your own hands.

We take measurements

For sewing, the chair cover must be measured by the rectangular back and seat:

Distance from the top of the seat back to the floor;
Back height;
Seat depth;
The width of the chair (in our example, the width of the back and seats are the same);
Leg height.

We are building a drawing

It is recommended that you create a schematic drawing before committing to a full-size attachment.

Our model has only three parts: a long rectangle covering the back, seat and floor distance at the front and back, and two rectangles with side panels from the floor to the seat.

The width of the main rectangle corresponds to the width of the chair, adding 2 cm on each side.

The length of the rectangle is determined by the height of the backrest from the floor, from the top of the chair to the seat, the depth of the seat and the height of the feet. It is worth increasing by 1.5 cm on each side.

Transferring the pattern to fabric

Since the chair model we are looking at does not involve a complex pattern, we can go through the step of constructing the design on the paper and assembling the paper pattern on the chair. You can cut out the binding parts directly on the fabric using these diagrams.

The fabric can be applied with chalk, soap or a simple pencil. The ruler is convenient to use, since all sides of the cut are straight.

Sewing a cover

As soon as the details of the future sleeve are cut out, we can start sewing. Sequence of operations:

Remove the side seams of the seat back;
Bend and sew the side and bottom slits of the seat back;
Sew the sides of the cover to the seat;
Pivot and stitch the side and bottom cutouts of the side and front panels of the lid;
Machine for internal seams and overlock cuts (Overlock is a special sewing machine for overlock cuts).

Tip: If you don't have a serger, you can sew zigzag stitches or stitches by hand. The stitched lid is unscrewed and the seams are ironed.

Our hand-stitched suitcase is ready!

Simple chair made of plastic pipes

You can also make a folding chair for fishing with your own hands from what is left, for example, after replacing old water pipes with plastic ones. Such pipes are distinguished by good strength and low weight, which allows you to take the chair without any problems, including to places where you need to travel for a long time on foot. The manufacturing sequence is approximately as follows:

First of all, you should cut the pipes. To make such a chair you will need 8 parts: 4 pieces 50 centimeters long, and 4 pieces 35 centimeters long.
From dense fabric (tarpaulin is excellent for such purposes), it is necessary to cut out 2 parts, one of them will actually be the seat (the length must be chosen so that the piece can be folded in half), the other will be used as a jumper that improves the stability of the structure.
Pipe sections 50 centimeters long are connected in pairs with bolts in the middle crosswise. Using corners, short pieces are attached to long pieces, after which the chair frame is ready.
A large piece of tarpaulin is used to cover the top of the structure, and a smaller piece is used to connect the legs of the chair in order to prevent their excessive opening.
The tension of the bolts should be adjusted so that the finished product folds and unfolds without much effort.

A finished fishing chair made from plastic pipes is light and relatively compact; the main drawback is the lack of a backrest, which will make a long fishing session not very comfortable.

How to make a fishing chair from a profile with your own hands

A folding fishing chair should be durable. Therefore, some craftsmen make it from a metal profile. The size of the material is chosen 1.5 * 2-2.5 so that the design does not turn out to be bulky. Thickness 2-3 mm for strength. Make a fishing chair with your own hands from professional pipe using the following steps:

Sections are cut from the profile pipe according to the dimensions shown in the drawings. Using a welding machine, assemble the legs and back
A through hole is made in the center of the legs. The two parts are secured together with a nut and bolt. Check the operation of the rotating element. The parts are painted with moisture-resistant metal paint.
Two rectangles are cut out of tarpaulin or an old jacket. The side seams are laid.
Place the fabric on the frame for the back and seat.
The seat and backrest are secured with bolts and nuts.

To avoid injury during operation, welded parts are carefully ground with a grinder.