Bar stool height, size options depending on model

Standard dimensions according to GOST

GOST is a state standard that establishes the basic consumer requirements for products in terms of their quality and safety. The size of the height of a bar stool according to GOST is determined taking into account the anatomical characteristics of a person and the position in which he sits most often, as well as the distance from the floor of the tabletop. According to GOST 17524.2-93, the standard seat height for bar stools is:

• 85 cm - such products are marked with the designation Bh (an abbreviation from the German BarHocker, which means “high”). Designed for bar counters with a height of 130 cm;
• 75 cm - these chairs are marked Th (TresenHocker translates as “low”). Ideal for racks with a height of 110 cm.

Their width and backrest angle (if available) are also specified in the relevant standards. However, they do not play such an important role. In addition to its size, a bar stool differs from an ordinary one in the presence of a footrest, without which it is inconvenient to use.

Before purchasing, you must first decide where and for what purpose the bar counter with chairs will be placed, and only then proceed to selecting the size of the furniture.

Standard standards

In the Russian Federation there are state standards for household furniture (GOST 13025.2-85). The following standard sizes are regulated for chairs and work chairs:

• seat depth - for a chair 360-450 mm, work chair - 400-500 mm;
• the height of the backrest bend from the seat is 165-200 mm;
• seat width - at least 360-450 mm for a chair and 400-500 mm for a work chair.

Modern furniture manufacturers offer customers a wide range of chairs of various sizes. So, their total height can be from 800 to 900 mm, and the height of the chair seat varies from 400 to 450 mm. The backrest width has a minimum size of 350 mm, and the depth can reach 500-550 mm. A model with a total height of 750 mm is considered standard (considering that the average human height is 165 cm). However, you can individually calculate the size based on your height.

An option suitable for the whole family are models with adjustable parameters.

Stools

When producing standard stools, manufacturers are guided by the following dimensions according to GOST: the length of the seat side is at least 320 mm, the height of the legs is at least 500 mm, the distance from the first horizontal bar to the seat is at least 380-420 mm. Many factories today are increasing these parameters. So, in stores you can find stools with a height of 420 mm to 480 mm. This difference is justified by the need to select comfortable models depending on height.

Chairs with backs

The times when stools were used in the kitchen, and only armchairs were present in the living room furniture ensemble, are gone. Today, the presence of a chair with a back is quite acceptable in the kitchen, living room, bedroom, relaxation and work areas. The height of kitchen models with backs is in the range of 800-900 mm. In this case, the distance from the floor to the seat is 400-450 mm. The correct height of the backrest (or the area on which you can lean your back) is at least 450 mm. Exceptions include models for bar counters.

Furniture for cafes and restaurants is characterized by more varied dimensions; its height can reach 1060 mm, back height – 600 mm. In this case, the distance from the floor to the seat should still be within 450 mm. To make rest more comfortable, the backrest can have a smooth physiological bend and be slightly tilted back. At the same time, the stability of the furniture must be ensured by additional structural elements.

Adjustable chairs

The best combination of table and chair heights is selected using adjustable models. Today, options are relevant in which the distance from the floor to the seat can be adjusted from 460 to 600 mm. As a rule, the backrest height is 450 mm and the seat width is 480 mm.

A feature of today's adjustable models is their adaptation to any practical human activity. It can be: medical (for a patient or a doctor), office, children's, kitchen, bar, original designer or orthopedic chair.

Bar

The height of the bar stool does not fit into standard standards. First of all, the size of restaurant equipment and furniture is taken into account. The height of the models can range from 750 to 850 mm, the width can be no less than 460, and the depth can be no less than 320. The tilt radius for standard options is 450 mm, and for lumbar – 220.

Since the legs do not reach the floor when sitting on a high chair, conditions are created for pinching the femoral veins and arteries. Therefore, it would not be superfluous to have an additional footrest on such a chair for support.

Children's models

The correct selection of chairs for children should also be carried out according to the following rules:

1. For children up to one meter tall, the height of the table should be 340-400 mm, the height of the chair – 180-220.
2. For a 6-7 year old student with a height of 110-120 cm, we recommend a chair with a height of 32 cm, and a table, including a dining table, with a height of 52 cm.
3. Older children (121-130 cm) need a table height of 57 cm and a chair height of 35 cm. For heights from 131 to 160 cm, a table height of 58-64 cm and a chair height of 34-38 cm are suitable.

For taller teenagers, it is recommended to purchase a table from 70-76 cm and a chair from 42-46 cm.

When choosing a chair for a schoolchild, it is worth considering the following models:

• writing;
• computer;
• knee orthopedic (as a variety - dynamic).

They can be equipped with armrests, however, orthopedists do not consider this option physiologically correct.

How to determine the height of a bar stool, types of models

Lately, bar counters and chairs have become very popular. This is due to the modern design of the room or the desire to save useful space. They are comfortable and take up minimal space: an ideal solution for a small bar counter or kitchen. When choosing a suitable set, not only the height of the bar stool is important, but also its construction, design, material and room parameters. Furniture should look good and be comfortable.

Types of mechanisms

Screw mechanism

The oldest and simplest technical solution for furniture with manual adjustment. The height changes by rotating the bar stool seat:

• rise - counterclockwise;
• lowering - clockwise.

The screw secures the selected position. If this element is hidden in the leg, it performs only a utilitarian function; if visible, it simultaneously serves as a decorative detail.

Models with a screw mechanism are usually used at home or in establishments that are stylized as old pubs, taverns, etc. They are also appropriate in loft-style interiors.

The seats and legs of stools with a screw adjustment device can be wooden, metal, or plastic. The lifting mechanism itself is usually made of durable metal.

Gas lift

A gas lift is a pneumatic structure with a lifting or rotary-lifting mechanism. Height adjustment is performed in automatic or semi-automatic mode, which is activated by a button/lever under the seat of the bar stool. The cylinder built into the leg contains gas, which is pressed by the piston, the gas compresses the spring, and the seat lowers. The shock absorber makes the movement smooth and limits the range of ascent/descent. The material of the shock absorber affects the life of the furniture: parts made of chrome and brass last longer, plastic parts are less durable, but they are significantly cheaper.

Models with gas lift are designed for intense loads, so they can be used not only at home, but also in office lounge areas and catering establishments.

Periodic monitoring of the condition of the mechanism is required (at least once a year) in order to promptly replace defective parts - eliminate the risk of breakdown and ensure safe operation. In addition, there are restrictions on the use of furniture with gas lift:

• People whose weight exceeds the permissible load (indicated in the instructions) should not sit down;
• it is prohibited to use furniture at temperatures below +4–6 °C;
• You need to adjust the parameters while standing and only then, sitting down on a bar stool, check comfort.

Convenient designs

A bar stool consists of a seat, legs and footrest.

Design, sizes, armrests, etc. Chairs will depend on use.

If you plan to stack chairs on top of each other or under a table to increase space, give preference to models that do not have a back.

These options are not suitable for long parties.

A great idea for bar stools is adjustable seat height.

The footrest also plays an important role - it should match the overall height and provide a comfortable fit on the chair, regardless of adjustment.

The main requirement for bar stools is durability and reliability.

A bar stool may have a rotating mechanism.

Upholstery

Like any upholstered furniture, bar stools with soft seats are upholstered in leatherette, polyurethane, genuine leather, and furniture fabric.

Chairs with genuine leather are included in the expensive price category. Genuine leather is a demanding material that must be treated with care and protected from deformation.

Faux leather or eco-leather, polyurethane materials are practical, wear-resistant and durable. They are easy to clean with a damp cloth and do not lose their shape or appearance.

It is practical to buy chairs made of furniture fabric. It is treated with Teflon impregnation, which protects the outer layer from contamination. A variety of textures and colors of upholstery fabrics allows you to choose furniture to suit classic and modern interiors.

Bar stool dimensions depending on model

The classic “four” is not always suitable for a rack. Sometimes space saving or unusual design is required. There are several models of bar stools: solid, adjustable, folding and semi-baroque.

Height plays a decisive role in the choice. If a person is much shorter or taller than average, it is best to purchase adjustable items with a lifting mechanism, especially for a home with children or frequent guests.

The disadvantages of the folding version include:

• the presence of only one leg, which does not guarantee ideal stability;
• the lifting mechanism will last about a year with frequent use (it is not recommended to operate it while sitting on a chair);
• not all model sizes are suitable for overweight people;
• It is important that such a chair does not become entertainment for the child, otherwise it will quickly fail.

On average, folding seats drop down to 51cm and rise up to 79cm.

The comfortable folding bar stool is designed to save space; You can easily fold the structure and insert it into a small narrow niche. Even a child can handle this. Such models cannot be adjusted in height, so when choosing, you need to focus on the tabletop. They are traditionally made of wood and metal using various inserts: plastic, plywood, rattan, screws. These products are available with one, three or four legs.

Solid models work well in a home where everyone is about the same height, so there is no need to constantly adjust the height of the bar stool. If the design has no zones and the kitchen floor is on the same level everywhere, this is the best choice.

Half-bar models: suitable for kitchens where there is no emphasis on the eating area. In order not to get confused about the sizes, it is enough to make simple calculations. The place should be slightly above the center of the bar - this is an excellent option for eating, socializing and working. For residential premises, a half-bar chair with a height of 60 to 70 cm is suitable if the tabletop is at a level of 90-95 cm from the floor.

The design of the back is also important. The right element will help relax your muscles and allow you to spend time with family and friends. Like all products with a back, the chair must be selected individually, guided by considerations of convenience.

General

Adjustable

Folding

Half bar

Review of popular models

All bar and semi-bar stools are conventionally divided into standard and designer. In a huge amount of bar furniture you can choose models for all styles and trends.

Style and chair

• Laconic models with a low back are suitable for high-tech, modern, pop art, and minimalist styles. Chairs with plastic seats of different colors and shapes are also combined with modern interiors. There are especially many suitable products available in Ikea stores and websites.
• In Provence and country styles, wooden chairs with wicker backs look great. Seat covers with frills, ties, and braid will only complement the picture.

• To match the English classics, gothic, half-chairs with soft seats and wood trim are selected. The color scheme here should be calm, consistent without bright contrasts. More elegant classics prefer royal colors: noble red, rich green, deep blue, golden and light beige, snow-white. Italian furniture is suitable for classic interiors.

• Chairs in plain fabric upholstery with a comfortable soft back and wooden legs are suitable for Scandinavian, Mediterranean style. Malaysian offers a wide selection of bar stools.
• For elegant art deco, you can choose chairs of non-standard models with unique shapes. Metal models with plastic inserts are suitable. The openwork back and ornate legs combine with the lush decoration of the room.

• For the industrial loft style, there are models with a painted metal frame. A wooden or leatherette seat of strict shapes is suitable for a loft interior. Wooden models of the correct proportions will also fit into the design. Stools and half-chairs in a laconic design are also suitable for industrial design.

Complex design

Designer models, distinguished by extravagance, can have the most unexpected shape. Futuristic designs of curved structures, ornate backs, and unique contours of supports will not fit into every interior. Quirky designs resemble a wine cork or a hammock net. Designer models occupy a special niche in appearance and price.

Half-bar stool in the interior

Buying half-bar chairs is not a problem. Properly matching these kitchen cabinets with the rest of your decor is much more difficult.

• wooden semi-baroque chairs go well with classic kitchens (for example, Ingolf) or country-style kitchens, chalets made of dark or light wood;
• metal and steel chairs are the prerogative of high-tech or modern kitchens;
• plastic is widely used in country houses;
• A set of transparent chairs and a table will decorate a small dining room, adding light and visual volume.

Glass fits into almost any room design.

To make semi-baroque armchairs fit harmoniously into the interior, you can change the upholstery or make leather or fabric upholstery in the desired color scheme.

Treating the fabric with a special solution will make it impermeable to liquids. The highlight of your kitchen can be beautiful chair cushions.

Materials

Classic models are traditionally made of wood. It looks impressive with ornamental carvings, curved contours of the armrests, piping, rivets and other decorations used in classic design. Simple stools without decoration will suit different room styles.

Modern products are often presented on chrome-plated metal legs with a plastic seat. Plastic is a multifaceted material that can be shaped into different shapes and painted in different colors. Transparent plastic looks like glass. Chairs with seats made of this material give the setting an urban touch.

Correct dimensions of a bar stool

Before purchasing chairs, you need to decide on the stand.

The seat height for a comfortable and comfortable seat will depend on the height of the counter.

The height of bar counters in retail outlets varies from 1.0 to 1.6 meters. Furniture intended for placement in a home kitchen should not exceed 0.85-0.9 m.

Often the countertop “continues” the kitchen unit and should not extend beyond the countertop.

If separation of zones is necessary, you should give preference to higher options.

Zoning a room with a bar counter is appropriate in studio apartments, when separating the kitchen, dining and living areas.

When buying a bar counter, based on your feelings, wait, sit on a chair and determine which size suits you.

When purchasing or ordering, consider the fact of ergonomics so that chairs, if not in use, can be placed under the table, which will significantly increase the room.

For maximum comfort and convenience, choose options that differ from the table by no more than 30 centimeters.

Banquet products

Tables and chairs of this type are more comfortable than ordinary kitchen ones. Typically, restaurants use half-chairs or chairs with armrests. This creates more convenience and comfort, but takes up less space than when placed in chairs.

This also allows you to save space in the hall and seat more people. However, it must be remembered that the width of one seat must be at least 500 mm in order for a person to feel comfortable at the table.

Restaurant models can have an inclined back, which allows you to take a more relaxed posture and facilitates communication. Also, such chairs are wider, deeper, higher than standard options. At the same time, do not forget about the convenience of the waiters. To do this, the height of the object should not exceed 1000 mm.

What you should pay attention to when choosing products

How to choose the height of a bar stool to suit your interior? The first factor that determines the size of a structure is where it will be used. There are two options:

• Catering establishment

When purchasing furniture for bars, restaurants, clubs and other catering establishments, owners are guided not only by their own ideas about aesthetics, but also by current standards of convenience and comfort, including state ones. As a rule, designs of standard sizes are purchased.

• Home kitchen (living room)

The height of a bar stool for a counter is 90, 110, 85 cm and so on, it is determined taking into account the internal features of the room, the height of the owners and their ideas about practicality. As a rule, people buy custom-made headphones at home rather than typical furniture.

When purchasing seating furniture, consider the following expert advice:

• The product must not be designed in such a way that the legs of a seated person form a 90 degree angle with respect to the hips. This is a forced position in which normal blood flow stops and a feeling of fatigue quickly develops.
• The minimum tilt of the seat relative to the backrest is 5 degrees. With it, the body of a sitting person will not roll down.
• When choosing chairs, it is better to give preference to products with lumbar support (back). The model will take up more space inside, but will make staying at the counter more comfortable.
• The optimal solution for high stools is a seat with a shallow recess. It will securely secure the body of a sitting person, which will eliminate the likelihood of falls and injuries.

If you are buying furniture for a restaurant, avoid options with armrests. Tall, overweight visitors will not feel comfortable.

What nuances are important to consider when buying a kitchen set?

The optimal height of a bar stool for a counter will be determined not only by the requirements of GOST, but also by the specifics of the furniture that you have selected for your kitchen. Home countertops are not always installed at the standard “restaurant” height of 110-130 cm. They are often made as an extension of the kitchen unit at a distance of 80-90 cm from the floor. How to proceed in this case?

Armchairs and stools for non-standard counter options are made to order. When selecting their dimensions, you need to proceed from the rule that between the seat and the tabletop there should be a minimum of 30 cm, a maximum of 40. This distance allows a person to comfortably place his knees under the counter and place his elbows on its working surface. This is the position that is considered the most comfortable. With this in mind, it was determined that the counter should be at least 20 cm higher than a standard kitchen table.

Maintaining the bar stool height standard is especially important if you like to sit cross-legged. In this case, the most comfortable distance to the tabletop will be 40 cm. Avoid purchasing too tall models, even if they seem attractive in appearance: such options will be unsuitable for everyday use, because... It will be impossible to sit on them comfortably.

What is the height of a half bar stool?

The height range of the half-beam product is 60-70 cm. The specific value is easy to calculate - the chair should slightly exceed half the height of the rack. For example, for a rack with a height of 90-95 cm, you will need a model with a height of 63 cm. The standard width of such products is 40-50 cm. However, if you are planning a large number of places, then it is permissible to choose a narrower width.

These specimens look most natural in studio apartments and combined kitchens. Their advantages are ease of use, style, practicality and compactness.

Upholstery material – quality and aesthetics

The back, seat and base of not all bar stool models are made of the same material. For example, ]Cattelan Italia[/anchor] creates stylish and practical examples of bar stools using faux leather for upholstery.

And Gubi chooses the highest quality textiles for the backrest and seat.

The most common materials for upholstering bar stools should be highlighted:

• Fabric and textiles. Smooth and rough, matte and with prints - such materials are quite pleasant to the touch and retain body heat. A wide variety of designs allows them to be integrated into the interior of any style.

• Faux leather. A cheaper analogue of natural material. Leather can frame only the seats and back, or it can be sewn onto the entire structure, forming a complete picture.

• Genuine Leather. Durable and elite material that will emphasize the status of the owner of such a chair. Can take any shape, be of different colors.

In the catalog of the interior design center Decorazzio you can find bar and semi-bar chairs made of all the specified materials.

How to choose the size of the bar counter?

There are no hard and fast rules, the main thing is that you feel comfortable. Therefore, first of all, you should focus on the habits and characteristics of family members. It will be convenient for a tall person to sit on a table with a height of 130 cm, and for a person of average or short height, models of 110-120 cm are suitable.

Also think about what you will do: will you cook? How comfortable is it to be behind the counter in this case?

Height

The standard height of the bar counter in the kitchen is 105 cm - for free-standing models; 90 cm - for those who are an extension of the headset. However, these are conditional values, they depend on the manufacturer and functional characteristics.

For example, the size of a rack combined with a hood ranges from 86 cm to 90 cm. If you plan to make it to order, consider the distance from the floor to the top of the cabinet.

If the set is L-shaped, then you can make the tabletop multi-level using a small add-on. On one side there will be a working area (86 cm), on the other there will be a bar with a height of 110 cm to 115 cm.

High tables, free-standing and adjacent to the wall, are rarely lower than 100 cm. The most common values ​​​​are 120 cm and 130 cm. The easiest way to buy chairs is to buy them.

Width

It also depends on the features. If the counter replaces the dining table, the minimum value is 55 cm, in this case it will not be possible to sit opposite each other, the serving will be parallel.

The tabletop depth per person is 40 cm, including space for common service items such as salad bowls, napkins, spices. If you want a barbell for 4 people, its width will be 70-80cm.

The width of the bar counter in the kitchen in a small apartment can be 30 cm - we are talking about models built into the set. This is an additional work surface, it cannot replace the dining room.

Length

There is no standard here, the size depends on your preferences. The main rule: for a comfortable position a person needs at least 60 cm, but the complexion of family members is also taken into account. Fat people need more space; the same goes for those who like to stretch their elbows.

When choosing the length, do not forget about the seating arrangement and the maximum number of people. The side can be used even if the width of the product allows it. If the room is small, imagine how the bar will be placed; will it interfere with movement around the room?

Instagram @darya_korol_designer

Design features of bar stools

At first glance, the design of the products seems simple. In fact, every detail is carefully thought out. We will tell you what elements the furniture consists of and what role they play.

Bar stool base

The base can be solid or in the form of legs. Depending on the model, the products have up to four supports. The classic version of furniture is pieces on one leg. However, structures with four are considered the most durable and stable.

Models with two and three legs are quite rare. Most often, such products are made to order. The bases are shaped elements equipped with additional lower supports.

Bar stool seat

The seat can be hard or soft. The second option is preferable if family members plan to often enjoy cozy gatherings at the counter.

The soft seat consists of upholstery and filling. The upholstery can be leather or textile. Manufacturers mainly use beautiful and durable materials with interesting textures. For example, velor, jacquard, chenille. The filler is foam rubber, polyurethane foam, and natural latex.

Wooden bar stools sometimes have a hard seat without upholstery. Such models are often found in country, minimalism and loft styles. The furniture looks impressive, but is considered not very comfortable for a long rest at the counter.

Popular seat shapes: round, semicircular, square. The standard width is 35-40 cm. Models with narrower seats are designed for compact racks.

Back

Almost all classic models have a backrest. It can be straight, semicircular, curly, high or low. When choosing, you should focus on personal preferences.

Like the seat, the back can be soft or hard. There is an intermediate option - a combined design. In this case, the upholstery only partially covers the backrest.

Armrests

These are optional design attributes. In the interior there are often models without armrests, which look no less original. It is worth recognizing that sitting on chairs equipped with hand rests is much more comfortable. However, such specimens do not fit into all interior styles.

Step

The footrest is another auxiliary, but optional part. It is very convenient when chairs are equipped with special stands. The elements help you take a more comfortable position when sitting and prevent your legs from getting tired quickly in a static position.

Important! And the footrest of the bar stool makes the structure more stable.

Bar stools with backrest in the interior

Bar stools with height adjustment

Furniture, the design of which allows you to adjust the parameters, is convenient:

• bar stools can be easily adjusted to the height of the tabletop;
• people of different heights will be able to sit comfortably;
• a set of chairs can be moved from the counter to the dining table as needed.

Models with a lift width of 28 cm are available (for example, the seat height can be increased from 51 to 79 cm).

What are bar stools made of?

In the kitchen, any bar stools, no matter what kind of interior it is, Loft or classic, are connected directly to the counter. To “guess”, owners usually select products with adjustable seat height.

Materials and their combinations

The following materials are used in the production process:

• rattan – wicker chairs with a reliable monolithic structure;
• wood is the most popular option for assembling one-piece chairs;
• glass - usually used to create seats for chairs with a steel frame;
• metal – these are solid chairs that can be adjusted;
• plastic - this material is usually used to make height-adjustable models.

Bar stool upholstery

As a rule, chairs are made of wood or metal. At the same time, in rare old products, carved legs and supports are most often restored, old fabric is replaced, and it is also recommended to strengthen the frame. The most important thing when disassembling an antique chair is to ensure that the covering is not damaged.

Upholstery and restoration can be done taking into account the different materials that are available, but when renovating you need to consider:

1. When repairing a high chair for children, it is necessary to pay special attention to the condition of additionally installed parts. In order to protect the baby, they must be carefully secured.
2. If there are cracks or small chips on the bar stool, they need to be repaired using wood putty or a special adhesive solution. In the event of significant damage, all furniture must be replaced.
3. If the bar stool is not damaged, that is, there are no visible defects on it, then you only need to remove the installed upholstery.

Tips for choosing the right height

When choosing the height of bar stools, they basically “push” themselves away from the same parameter as the counter. The seat is considered comfortable if it is located at a distance of 25–35 cm from the bottom surface of the tabletop. The standard height of the bar is also determined taking into account the anatomical characteristics of the person. For artifacts used in retail and government settings, these are 1100 cm, 1200 cm, 1250 cm and 1300 cm.

Variety of chairs for schoolchildren, best brands, selection criteria

Smaller models are often chosen for homes. They are safer, especially when used by children, and create a greater sense of intimacy and comfort. In addition, the contrast with the standard low ceilings of typical apartments in the overall interior looks ugly.

Standard dimensions of a home bar counter: height - 105 cm, length - 120 cm, width - 55 cm. This product is convenient to use as an additional dining surface or table for cooking. The minimum width of the tabletop is 30 cm (it is inconvenient to use if it is smaller).

If the shelving is an integral part of the kitchen cabinet, then when calculating its height, the height of the cabinet front, its base and the thickness of the countertop are taken into account. Typically this size is 860 x 880 x 910 mm.

When choosing, the first thing that puts you off is the size of the rack

For the home, it is better to give preference to a model with a small height.
Depending on the height of the home bar counter, the recommended dimensions of a bar stool that will be comfortable for you are:

Types of high chairs for bathing babies in the bathroom, manufacturers

When choosing bar stools, in addition to the general design and construction, the height of the product plays an important role. This affects not only comfort, but also the safety of its use. The range of models offered by manufacturers is wide and allows you to find an option that meets any need.

Combined counter with kitchen cabinet and matching bar stools

Bar counter instead of a kitchen table

Chair height option for independent bar counter

Size options depending on the type of model

Standard bar stools are stable structures with high legs with a seat and footrest. All of them are divided into several types:

1. Bar stools themselves are similar to regular ones, that is, they have a back. They can be either on four legs (both standard sizes are popular) or on one with adjustable height. The depth of their seat according to GOST is at least 42 cm, width - 38 cm or more. The backrest is considered such if its upper edge is more than 32 cm above the seat. They are very widely used in catering establishments and at home.
2. Bar stools are compact, fit under the bar counter and do not take up extra space. Their seat depth is 30–36 cm, so they are not comfortable enough for home use; more often they are the choice of a mini-cafe. The distance from the seat to the floor depends on the dimensions of the stand.
3. Bar half-chairs - with backrest and armrests. The most convenient option for spending a long time at the counter. Most often, their height is adjustable, and the seat width is larger than that of chairs or stools. They are good not only for cafes or bars, but are also used near reception areas in hotels, private clinics and other similar establishments. They are purchased less frequently for home furnishings, since ordinary kitchen chairs are cheaper and look more comfortable.

There is another category of furniture - semi-bar stools, or so-called hawkers (a smaller copy of bar stools). The only difference is in dimensions; in half-bar stools the seat height is 60–70 cm. They are popular in billiard rooms and restaurants. They are rarely purchased for home use.

Chairs

Stools

Half-chair
Manufacturers offer the following types of furniture:

1. Height adjustable - suitable for any rack size. They are especially convenient if they are used by children and adults. Expensive models are equipped with a gas lift system, while cheap ones are equipped with a backlash mechanism. The rotating mechanism of some models adds comfort.
2. Solid - without the possibility of changing any characteristics, design, appearance. If purchasing a chair with height adjustment is problematic, it is better to choose a good quality, comfortable one-piece one. Moreover, the range of sizes of such models is quite wide.
3. Folding - folding into a flat design, and therefore very convenient for storage. They are usually used in small kitchens for entertaining guests. In terms of dimensions, these are usually not the largest models.

In addition to GOST dimensions, modern furniture manufacturers produce bar stools with a seat located at a distance of 0.55 m to 1 m from the floor. As a rule, such models are ordered individually.

In general, when using a bar stool, comfort largely depends on the correct height of the bar stool rather than on other characteristics - design or style. As for the latter, the dimensions of the product also do not affect it. Any stylistic options are possible - from country, classic and traditional to high-tech, loft or art deco.

Distinctive features of growing chairs, important selection criteria

With height adjustment

Folding

Whole