How to install spotlights in drywall?

Today, spot lighting is used very often in houses and apartments. This is due to the ease of installation of the products, as well as their inconspicuousness on the ceiling, which in no way spoils the interior of the room. Next, we will talk about how to properly install spotlights in drywall with your own hands, providing step-by-step instructions and a visual video lesson.

Installing spotlights in a plasterboard ceiling has many advantages, namely:

  • It’s not complicated; even a novice electrician can handle it;
  • takes very little time (fix 1 piece no longer than half an hour if everything is prepared);
  • high-quality room lighting, especially if you use economical LED lamps;
  • The light bulbs hide in the ceiling without spoiling the interior of the room.

Please note that it is recommended to use LED lamps as light sources, because... they have a fairly high luminous flux and service life. In addition, these products allow you to save more than 30% of electricity!

Preparation

Properly organized room lighting provides a pleasant and comfortable pastime, helps decorate the interior or create effective visibility in the work area. However, to achieve high-quality lighting effects, it is important to correctly select the necessary materials, tools, equipment, plan the location, etc. First, let's look at the possible options for tools that may be useful to you for carrying out activities for installing spotlights.

Required tools and materials

In each specific situation, the installation of a spotlight can differ significantly, since the process is associated with the characteristics of the ceiling structures, the stages of repair work and the tools and devices available.

The most relevant tools are for drilling holes in drywall; this process can be carried out using:

  • A special flexible crown for working on plasterboard is the best option, as it is designed specifically for plasterboard ceilings. The set contains several ring-shaped files of different diameters, which are inserted into the drill attachment.


Flexible crowns

  • Circular tile drill (ballerina) , despite the fact that their direct purpose is to work on ceramic surfaces, they do an excellent job with drywall. A significant advantage of such a drill attachment is the ability to set the center of the hole with fairly high accuracy.


Crown on tiles

  • Jigsaw - working with an automatic blade is more difficult than with previous attachments, but it is still possible to make a hole close to round in shape.


Using a jigsaw

  • Drill bits - with its help you can drill a fairly large number of holes in a circle, and break out the inside with your fingers.
  • A hacksaw blade or a stationery knife are the most difficult options, since all the work will have to be done manually.


Using a utility knife
You can take any of the above tools for working on drywall that you have on hand. Most of them can be driven automatically using a drill, a screwdriver, or a hammer drill with a drill function.

To connect spotlights you will need connecting wires or cable. Connecting wires to the lamp can be done using soldering, terminals or sleeve crimping. When working with cable and wire products, you may also need pliers, wire cutters, and pliers to remove insulation. To tighten/unscrew the bolts, you must use slotted and Phillips screwdrivers.

Spot lamp selection

The very concept of a spotlight comes from the English lexicon, where they are called spot. In domestic usage, such lighting devices are called soffits, spotlights or spots; the main difference between such lighting sources is their local location and the same effect. However, the variety of their shapes, design features and design requires a responsible approach to choosing a spotlight model for installation in a ceiling frame. The division is made according to a number of factors, so below we will consider them all in turn.

Based on the type of lamps installed, lighting spots are divided into:

  • Incandescent lamps are the simplest option, but are characterized by very low efficiency, only about 5% of the electricity is spent on lighting and poor light output of 8 - 10 Lm/W;
  • Halogen lamps - have slightly better light output than incandescent light bulbs from 12 to 18 Lm/W, but are not easy to touch with bare hands;
  • Fluorescent light bulbs are a category of gas-discharge lamps that have a high light output of 40 to 60 Lm/W, but contain toxic mercury, which is easily absorbed into drywall. They belong to the category of energy-saving lamps, therefore, despite their high cost, they can significantly save energy.
  • LED light bulbs are the most effective, as they can provide from 90 to 120 Lm/W and are completely safe for humans. They also fall into the category of energy-saving devices. LED lamps are often used for LED lighting of premises.

For spotlights, the most profitable are fluorescent and LED lamps. They generate relatively little heat, consume little electricity, and can provide a wide range of color temperatures - from warm to cold spectrum.

By type of base - there is quite a wide variety of connection options, but in spotlights they are used with base G, E and non-separable models. In the latter, the light bulb is not separated from the lamp; they use built-in lamps and the entire lamp must be replaced.


By type of base

In terms of overall dimensions, they can have different diameters and heights, which must be taken into account in relation to the size of the plasterboard boards in which they will be installed. The height of the ceiling light should be less than the space in the niche behind the drywall so that it fits freely in the hole.

Based on the method of arrangement, recessed and surface-mounted ceiling lamps are distinguished. The first of them are completely hidden under drywall, overhead devices remain outside, and the mounting method is identical to that of a chandelier.


Built-in and overhead

According to their design, they can be stationary or rotary, single or block. Stationary spotlights illuminate only a strictly defined area, while rotary spotlights can change the position of the illuminated area. Single ones contain only one point of the lighting device, while block ones contain several at once in one housing.


Stationary and rotary

How to remove a spotlight from drywall

The outer cover in the form of a ring is attached to the body using protrusions on the inside. Therefore, if necessary, you can separate the part from the reflector and insert it into the hole without a housing. To install the lamp, the reflector with the light bulb is inserted inside the cover and rotated in a horizontal plane at a small angle.

To dismantle the lamp, the procedure is performed in the reverse order - rotate the housing with the reflector, take them out, after which you can replace the lamp, remove the device or perform reverse installation.

Installation Requirements

There are no general requirements for installing spotlights in plasterboard, but there are recommendations regarding some parameters. Firstly, built-in lamps must provide good visibility or local illumination in a certain area. Secondly, the choice of installation location and technical parameters must be consistent with other elements of the lighting system - hanging chandeliers, LED strips, sconces, etc.

Thirdly, it is recommended to maintain the distances between spotlights in the following ratios:

  • If lamps are mounted in rows, then there should be no more than 1 m between them;
  • Within one row, the distance between spotlights should not exceed 1.5 m;
  • If there are several rows, then the point devices should be staggered relative to each other;
  • The distance from built-in spots to walls or windows should be at least 0.5 - 0.6 m.

Lack of light

The fourth argument against spots is that in the end they all provide very little light. No matter how many you place them, no matter how brightly they shine, the room where these light sources are located is always dark.

This happens due to the fact that they shine in a beam and strictly on the floor, and not in all directions.

They cast light cones of light onto the walls, which do not contribute to the normal reflection and propagation of rays. That is, the light does not fulfill its main task - it does not fill the room as with daylight.

Something else can be seen below, but the room as a whole remains poorly lit. This causes discomfort and you always want to increase the number of lamps or their power.

Or additionally turn on a chandelier or table lamp.

Here, read user comments from YouTube.

Selecting an installation location and mounting holes

Installation of spotlights is carried out in accordance with the characteristics of plasterboard structures and the planned quantity. The simplest option is considered to be the option during installation of the frame, when both the placement of electrical wiring and the location of the profile can be adjusted. If the ceiling tiles have already been installed and the finishing work has been completed, then the location will be selected in accordance with the type of structure and installation method.

For recessed spotlights, it is necessary to select a free space in the drywall where there is no metal profile, otherwise you will have to change the sheet of drywall and re-carry out the finishing work. If the marks on the places where the profile was laid have not been preserved, then you can use a magnet to find them.


Profile in hole

If the lamp is overhead, then the installation location is chosen, as for the location of the chandelier. In this case, you can use two methods of fastening: using metal screws or using butterfly dowels. For the first option, select a place where there is a profile behind the drywall. In the second case, the installation location is not tied to the profile; the butterfly dowel is installed under any conditions.

Layout

The principle of installing point lighting devices has no strict boundaries. The location on the suspended structure is determined based on your needs for room illumination or the creation of decorative lighting; perhaps the diagram should become a figure for decorating a plasterboard ceiling. Below are commonly used luminaire placement options:


Lamp layout diagrams

Arrangement options for LED spotlights for plasterboard ceilings

The installation scheme and placement of lighting points on plasterboard depends only on the design of the ceiling. This could be installing lamps in a chain around the perimeter of the room. For such a scheme, stationary unregulated lamps are used.

A fairly popular scheme is in which the ceiling lights are distributed in several groups. In this case, the main part of the light flux is directed not vertically, but at an angle towards the wall.

This is called reflected flux lighting. Very convenient if you need to create an atmosphere of comfort in the room.

Adjustable lamps with LED reflectors are installed in the kitchen and auxiliary rooms. They are most convenient for conditions where they work and require high brightness lighting.

Installation process step by step

To install spotlights in drywall, you will need to perform the following sequence of actions:

  • Apply markings for future installation locations on the plasterboard structure. It is advisable to use measuring devices to ensure that the hole is centered.
  • Select the diameter of the drill bit according to the diameter of the spots. It is desirable that it be a little larger, then the lamp will easily fit into the diameter of the hole.
  • Turn off the power supply to the electrical network at the input panel if the connection and installation of electrical wiring has already been completed. If the power supply system for spotlights is not yet connected, you can skip this point.
  • Drill a hole in the drywall or make one using any of the methods described above.


Make a hole in drywall

  • Pull the power wires out through the holes and clean their edges.


Get the wires

  • Make an electrical connection to the spotlight to the wiring line.


Connecting the lamp to the wiring

  • Hide the wiring in the frame and install the soffit in the drywall, secure it with spring fasteners.
  • Install an LED or fluorescent lamp into the socket. If necessary, secure with a spring pin.


Secure the lamp with a pin

Diameter of the hole for a spotlight in plasterboard

For the vast majority of models, the case size is either 60 mm or 75 mm. But this is precisely the mounting dimension, which is measured not by the rim of the reflector cover, but by the distance between the clamps when folded.

In addition, the round shape of the reflector does not mean that it is necessary to drill a round hole to mount the device on drywall. There are many models, as a rule, these are lamps with built-in motion sensors, in which a hole for installation must be cut in a square or rectangular shape.

Rules and tips

Before installing spotlights, it is advisable to familiarize yourself with the basic tips and rules developed by installation specialists:

  • If you want to regulate the power of the light flux, then before installing the spots you need to select dimmable LED lamps and the same switch.
  • Never use twists for electrical connections; this is an extremely dangerous option.
  • If there are suspended ceilings in close proximity to the spotlight, carefully select the power of the light bulb, as the film may be deformed.
  • When installing halogen lamps in a spotlight, do not touch the bulb with your bare fingers - this will shorten its service life.
  • If you need to power spotlights from low voltage, they are connected via a power supply or transformer. The power of the transformer or unit is selected depending on the power of the lamps.
  • In cases where the installation of a point device requires special care, the mounting springs are tightened with wire, which is cut after installation.

Dimensions of spotlights for plasterboard ceilings

For home lighting, devices with a reflector rim diameter of 85 mm and 106 mm are used. The first type is used for LEDs, halogens and incandescent lamps designed for open-frame installation. The height of the housing can vary from 35-45 cm for LED models, up to 60 mm for halogen and 90 mm for incandescent bulbs.

A larger diameter of spotlights for drywall is used in situations where a fluorescent lamp is used as a light source. They have lower luminous flux density and intensity, so you have to use a larger reflector size so as not to increase the number of lighting points on the drywall. The case height is one of the largest, up to 95 mm.

Preparatory work

If there are several spotlights and they are located at a small distance from each other (up to 500 mm), then it will be enough to stretch the wire to the nearest one. This process is carried out before the installation of the ceiling structure begins. Then, after the ceiling is completely installed, the cable is routed from device to device. Which wire should I use? Of course, from the point of view of ease of connection to the marks, it is flexible multi-core, but from the point of view of quality and reliability of installation, it is necessary to choose the same one as for all wiring. More often it is a hard copper wire, for example VVG-2x1.5.

We fix the wires in the terminal block

If a step-down transformer is used, then there is one important nuance. When using low supply voltage for halogen lamps (12 Volts), the voltage drop in the wires will be of great importance. In short, the wire must have a cross-section of more than 1.5 sq. mm, preferably 2.5. And the length of the cable to each lamp must be the same, so that the voltage drop is the same.

Lighting lamp type

An important role when organizing ceiling lighting is played by the type of lighting lamps that will be used in the lamps. A number of factors will depend on their correct choice - efficiency, durability, lighting quality and, most importantly, safety. What type of lamps can be installed in luminaires intended for installation in plasterboard? Three options can be considered the most successful:

  • Luminescent. This type of light bulb is perfect for any type of ceiling light. Fluorescent illuminators are economical, hardly heat up, and last a long time. The only problem is that they are relatively large in size, which means that the lamps will not be quite miniature.
  • LED. Semiconductor light sources are an ideal option for ceiling lamps, both built into plasterboard and overhead. LEDs are economical, durable, do not heat up much, have good color characteristics and are very compact. The only drawback of such illuminators is their fairly high cost.
  • Incandescent lamps . These can be either the familiar bulbs with a spiral or their halogen counterparts. When choosing this option, it is necessary to take into account that both of them get quite hot. This can be dangerous in terms of fire, and drywall does not like high temperatures.

Particular care should be taken when installing halogen light sources in drywall. The bulb of these lamps, even in open lamps, heats up to 250 degrees Celsius and higher.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]