How to make a screen from plastic pipes with your own hands for kindergarten

The creative development of preschool children within the kindergarten is one of the important stages in the formation of a growing personality.

The group environment and surrounding objects promote curiosity, creativity, bold trials and discoveries.

Taking into account the fact that the child spends most of the daytime in a group, the surrounding space and interior in it become part of the gaming and educational process. The more opportunities children have to realize their own fantasies, the easier it is for a teacher to direct the learning process in the right direction.

The child treats objects and space as a resource, seeing in them opportunities for realizing his plans.

One of the interior details that can help in the creative development and organization of group life is a stylized screen. Being an important attribute of theatrical performances, with a touch of mystery, it evokes genuine delight and curiosity among children.

The simplest puppet theater attracts children much more than painted fictional characters.

Depending on the size, with the help of a screen you can stage scenes both for puppet theater and for real small actors, adding entertainment to the process and increasing interest.

The screen in this case becomes an urgently needed item.

If the group’s budget does not allow for purchasing a ready-made option, but the children have a desire to organize a theater club, you can make your own screen from plastic pipes for the kindergarten with your own hands.

The design of this multifunctional device is very simple.

Choosing the screen design we need

A lightweight DIY screen made from plastic pipes will not require much time to make, but it will fit perfectly into any interior and will last a long time.

The child treats objects and space as a resource, seeing in them opportunities for realizing his plans.

The screen can be made for different purposes - for fencing off space, for garden fairy-tale performances, for a tabletop theater, etc. The size of the product depends on the room in which it is intended to be used. The standard design has three sections, but a screen for zoning a large space should consist of at least 5-6 cells.

One of the interior details that can help in the creative development and organization of group life is a stylized screen.

Note! In order for the screen to be stable, its total length at the base should not be less than its height. Stability is also provided by an increase in the number of sections.

A frame is constructed from pipes, which is then decorated and decorated based on the purpose of using this item.

What it is

A screen can be called a structure containing various hidden elements. With its help, you can organize skits, performances, use it for a puppet theater, conduct a master class in a kindergarten, and much more.

Preparation of all materials and tools

Very often, plastic pipes remain after renovation of premises and can be used for folk crafts, including screens for kindergartens. If you don’t find any, the materials can be bought at your nearest hardware store, and they are inexpensive.

Making a screen from plastic pipes with your own hands will not require large expenses.

Before purchasing, you need to accurately determine the dimensions of the future product, make a drawing of the required frame, calculate the pipe footage from it, as well as the number of plastic corners (fittings) and double-sided fasteners.

You will need propylene pipes of various lengths, plastic corners and double-sided fasteners to connect the sections to each other.

For example, a traditional three-leaf screen made of polypropylene pipes consists of flaps that require pipes of sizes 60-80 cm (top and bottom width, 6 pieces) and 100-120 cm (side height, 6 pieces). Thus, the total footage of the pipes should be approximately 10-12 m.

Note! As a rule, the standard length of plastic pipes in stores is 5 m. Keep this in mind when calculating the length of the required pipes for the product, because they all must be solid.

For the standard screen in question, you will also need 12 corners, or fittings (4 for each section), as well as 6-8 double-sided connecting fasteners.
For drapery in sections of the screen you will need fabric and materials for decoration.

You can use any available fabric to sew covers.
It must be remembered that it must be durable and easy to wash. The set of tools and materials for the work should include a hacksaw for cutting plastic, an iron for heating the ends of pipes before joining (or buy special glue for PVC), and alcohol wipes for degreasing the surface. Having a special plumbing apparatus for welding plastic pipes will greatly simplify the work.

A special machine for welding plastic pipes made of propylene, which is used by professional plumbers during installation, can be a good help.

Attention! A child can help in the process of making a screen, but work with glue or iron should only be carried out by an adult using all safety measures!

A few words about design options

Before making the furniture in question, you should decide on its tasks and design.

Most often, shelving from the following types of pipes is installed in the garage:

Wall-mounted - are a stand-alone structure that is not attached to the wall. Thanks to this, the product can be transported. Another advantage is that the structure does not put a load on the walls, which is important when they are not very strong, for example, framed or covered with plasterboard;

Wall-mounted furniture can be moved from place to place

Stationary - unlike wall-mounted ones, they have racks only on the front side, so the load-bearing function of the rear racks is performed by the wall to which the shelves are attached. That is why such models are called stationary;

Stationary rack attached to the wall

Cantilever - unlike stationary ones, these products have rear supporting posts, as a result of which the shelves are attached in a cantilever manner, i.e. only from the back side, while the front side simply hangs in the air. The frame of such a product can be attached to the wall or be portable.

Note! Console models take up a little space, but have a small load capacity, so they are not suitable for storing heavy items.

The photo shows a diagram of a cantilever structure made of profiled pipes

Hanging - unlike all the products described above, they are hung on the wall, so the entire load falls on the walls, not the floor. In essence, these are ordinary shelves, but larger in size and connected to each other by construction sites. They can be either console or regular, i.e. with front pillars.

Hanging rack does not rest on the floor

The most versatile are wall-mounted and stationary structures, as they allow you to store everything from tools and all kinds of small items to wheels and various heavy objects. If the garage is small, it makes sense to use suspended structures installed under the ceiling, as a result of which the lower part of the garage will be unloaded.

The process of making a screen from plastic pipes with your own hands

Having prepared the materials, you can immediately begin work.

Once the dimensions of the future screen have been determined, you need to cut the PVC pipes to the desired length.

First, you need to cut pipes of the required length, 4 for each section (2 for specifying the width, 2 for the height). The ends of each tube must be degreased with alcohol.

How to connect pipes correctly

When connecting with glue, it is necessary to apply the product to the ends of the pipes, and after the plastic has softened (after 1-2 minutes), insert it into the hole in the corner. Excess glue should be immediately removed with a dry cloth.
The ends of the tubes can also be heated using an iron. To do this, you need to place a sheet of paper on the cut of the pipe, and then press the sole of the hot device and hold for several seconds, after which you immediately insert the tube into the fitting.

We fasten the section frames using corner joints.
In this way, all sections are fastened from the tubes; they must be identical in length and width.

Connecting sections

The parts of the future screen need to be connected to each other, waiting 15-20 minutes after gluing the parts.

Here you will need either a special apparatus or a little physical effort to heat and insert the plastic pipe profile into the corner.

Double-sided fasteners are installed on one side of the section, after which the side of the next section is attached to them. The fasteners should be evenly distributed along the entire length (standardly there are three of them - at the top, bottom and in the middle).

Peculiarities

Metal pipes are made from different raw materials:

cast iron;
carbon and stainless steel;
brass;
aluminum and other composite materials.

Their cutting is carried out using a mechanized or automated method using various equipment. The use of a machine for cutting and trimming pipes allows you to cut pipes more accurately, quickly and efficiently in comparison with manual cutting.

A distinctive feature of the products of the first group is their versatility. They are comfortable and light weight. This allows them to be used in different conditions, in addition to the workshop, during pipeline installation and repair. They are easy to install on pipes by one worker.

In addition, they provide for easy adjustment of the pipe diameter. Essentially, these are mobile or portable units, which, depending on the type of cutter, can be:

oxygen gas;
plasma;
water jet.

Models may have auxiliary rotating devices to make pipe cutting easier. Analogues of mechanical cutting are needed to cut and obtain the ideal chamfer, which is characteristic of new factory pipes. These devices do not generate sparks during use, so they are used in work with oil and gas pipelines, in which open flames are unacceptable. They are equipped with a mechanized trolley to allow movement around the pipe using a chain.

Design and decorations

Designing a screen is the most creative and enjoyable part of the job, in which you can realize all your ideas. If the screen is intended for a kindergarten, it should be bright and attractive.

Fastenings made from Velcro tape or loops are sewn or glued along the top side of the future cover.

To disguise the plastic, the finished frame can be painted with acrylic paints and dried well. Details can be made in different colors to make the product even more decorative and bright.
The openings of the sashes need to be draped with fabric covers so that the screen acquires its main function - fencing off the space. It is better to take a material of natural composition so that the product does not become electrified and does not attract dust. The covers are sewn to the size of the sashes; they can be in the form of free-flowing curtains, attached only to the upper slats, or in the form of canvases, attached along the entire perimeter. Fastenings for fabric can be in the form of loops, fabric ties, decorative bows, Velcro, rubber tensioners, etc.
The functionality of the screen is significantly expanded if the product is supplemented with patch pockets for storing toys and hanging clothespins for displaying children's drawings and crafts.

You can make drapes of different styles in order to use the screen for different purposes - for example, winter/summer decor, decorations for different types of children's performances and fairy tales.

You can stick colorful appliqués or sew small pockets onto stretched covers.

Where to begin

Polypropylene is a fairly versatile, durable and multifunctional material. It’s not for nothing that some even make bunk beds out of it, without worrying about strength and stability at all.

As with the manufacture of any other furniture from polypropylene pipes, before creating a decorative screen, you should determine the design and dimensions of the future structure.

Master classes on creating screens

A successful master class on making a screen from plastic pipes with your own hands embodies the idea of creating an entire children's house on its basis - for this purpose the door and windows are decorated on covers.
Another master class gives advice on using screens for children's creativity - appliqués and children's crafts are attached to the covers.
If paper wallpaper sheets are attached instead of fabric covers, the screen can be used for collective drawing by children, creating large posters - for example, for the holidays.
The design can serve as a basis for activities with children; counting material, letters, and materials for the development of logic and imagination can be attached to it.

Use of ventilation pipes in everyday life

Ventilation pipes with a set of connecting and fastening parts are usually called air ducts. They are designed to ensure air circulation and are installed in those rooms where there is no access to natural air movement or there is an additional need for ventilation: in kitchens, bathrooms, toilets.

Before the appearance of plastic parts on the market, air ducts were made of zinc-coated alloy; they are still often found in production shops or in catering establishments (their introduction is associated with high temperatures).

But for implementation in everyday life, that is, for installing ventilation in apartments and cottages, polymer products are more suitable.

They have the following advantages:

have less weight than iron ones, so they are easier to install with your own hands;
smooth walls have little resistance to air movement;
airtight, as they have no seams;
resistant to high humidity, do not rust;
On sale you can always find a set of fittings suitable for the cross-section.

Products that meet GOST standards and have certificates of conformity are allowed for sale, so we can talk about the safety of plastic parts.

https://www.youtube.com/watch?v=4wC36soTX8k

Pencil case in the kitchen: is it necessary, what functions does it perform, which one to choose?

To make your own screen based on polypropylene, you will need a little of your time and a certain amount of materials. You can highlight the idea in the photo, copy the options you like, and assemble them step by step with your own hands. Please note that the main task is to create a strong, stable and safe structure, since it will constantly be exposed to certain influences. That is, you need to make a partition conscientiously, with an eye to active use. Also exclude any heavy or sharp elements.

Usually a screen is made of 3 elements. This is one central part and two sidewalls, which, due to their mobility, can be transformed into different shapes. But you can add as many sections as you need.

Consider the possibility of changing covers in advance. The easiest way is to attach Velcro around the perimeter of the pipes themselves, with the help of which the replaceable fabric will be held.

The covers will need to be sewn on the opposite side to ensure a strong adhesion to the Velcro. Or vice versa.

Polypropylene is excellent for such tasks. This is an easy-to-process and affordable material. It makes a strong and stable frame. There are also no complaints about durability. Therefore, there are several good reasons to choose polypropylene pipes. The connection will be made using plastic fittings, so do not forget to buy the required number of connecting elements. The formation of a strong connection is carried out with a special soldering iron. You can use another heating option, but using a soldering iron is preferable.

Now all that remains is to tell you how the structure is assembled and what the home craftsman needs to take into account.