Corner sofa: sizes of the most popular models and the secret of the perfect choice

SHARE ON SOCIAL NETWORKS

FacebookTwitterOkGoogle+PinterestVk

While in the store, the buyer must find answers to many questions and make an informed decision before purchasing a corner sofa: the size and shape of the structure, its design and style, upholstery options and colors - all these points deserve attention. This article will help you decide on the right size piece of furniture that will fit perfectly into the decor of the room.

Manufacturers offer customers a large selection of corner sofas

Dimensions of standard corner sofas: how measurements are taken

A corner sofa is a type of upholstered furniture. Its design consists of two parts, which are located at right angles to each other. In most cases, the length of the base of the sofa is twice the size of its sides. Both structural parts are connected to each other by strong fasteners. Sometimes you can find products on sale in which the side part is a separate part. This option is typical for large modular corner sofas. The side part of the structure is attached to the base and can be removed or rearranged at any time.

When measuring the width of the structure, the base and corner section are taken into account

Taking into account the design features of corner sofas, the length of the body part is measured from the beginning of one section to the end of the other. In this case, the corner area must also be taken into account. To correctly measure the width, you need to take into account not only the corner section of the sofa, but also its base. All obtained indicators must be added to obtain accurate width and length values.

Corner sofa: standard design sizes

According to the standard, the dimensions of a corner sofa are as follows:

1. The length of the structure varies between 2.3-2.8 m.
2. The width of the furniture is 1.5-1.8 m.
3. The depth of the seats is at least 0.5 m, and their height above the floor is 0.35-0.4 m.

The standard length of corner sofas varies between 2.3-2.8 m

However, generally accepted standards are not the only possible values. Manufacturers strive to take into account the needs of all customers, so the dimensions of furniture can be very diverse. Not only compact products with a length not exceeding 2.3 m are on sale, but also very large structures, the size of which is more than 4 m.

Helpful advice! In large-sized sofas, the frame part is subject to serious loads. Therefore, when purchasing such furniture, you should select models with a reliable and durable base.

Many versions of corner sofas are equipped with transformation mechanisms, so they can fully replace a double bed. When the structure is not used for sleeping, it can serve as a comfortable seating area during the day.

The height of the seats above the floor should be from 0.35 to 0.4 meters

The standard parameters of transformers include width; taking this criterion into account, sofas are divided into the following types:

1. Single beds - the length of the bed in such a sofa is 150 cm, width - 70 cm.
2. Double – the width of these structures sometimes reaches 150 cm.
3. Triple - the width of the bed in such models can be up to 2 m.

Sleeping area

The undeniable advantage of modern corner systems is that in terms of functionality they are a universal piece of furniture, and in terms of comfort they are comparable to beds. The most popular models are those in which the sofas are compact in size, but their sleeping area is spacious. Such furniture is suitable for sleeping at night and does not take up much space during the day.

Width is the main standard size according to which corner systems are divided into several varieties. They are presented in the table.

When choosing, special attention should be paid to such characteristics as the comfort of the bed, the overall dimensions of the corner sofas and their equipment.

Bed

Double

Triple room

Non-standard designs: drawings of corner sofas with dimensions

In an effort to maximally cover the needs of all segments of the population, home furniture manufacturers often deviate from generally accepted standards, offering designs with increased or decreased dimensions. Thanks to this, buyers can choose not only soft areas in a classic design, but also furnishings for spacious rooms and rooms with limited space.

Drawing of a custom corner sofa with dimensions

Parameters of compact and small-sized corner sofas

Non-standard products include small-sized structures. They have the same length and width, which is 1.7 m. These sofa options are ideal for a corridor or kitchen. Small-sized models are usually equipped with a folding mechanism. If necessary, they can be easily expanded to create a comfortable place to sleep, which is designed for one person.

In addition to small corner sofas with a sleeping place, in this category of furniture there are models with hidden drawers. They can be used for convenient storage of small household items and dishes. Such product options are usually installed in kitchens in order to save space.

Small corner sofas fit perfectly into any space

Mainly in small-sized structures, corner sections are universal. They can be placed either on the left side of the sofa or on the right. In such models there is no rigid binding of elements, which is usually provided by manufacturers.

There are very small corner sofas for small rooms. In these models, the size of the bed is 1.5x1.5, although there are other modifications with dimensions of 1.3x2 m. Compact sofas are suitable for small studio apartments or Khrushchev-era apartments, where the bedroom area is very small.

Helpful advice! Models with the Eurobook, Dolphin and Click-Klyak transformation mechanism provide a comfortable place to sleep and at the same time retain free space better than others.

Small L-shaped corner sofas are great for square spaces

Non-standard models of corner sofas in small sizes

In stores that sell home furniture, you can find very small models of sofas. In most cases, these designs have the appearance of a book. When unfolded, the size of the bed is 1.25 x 1.4 m.

Non-standard models of small corner sofas have one significant advantage. They can be combined with other compact structures, the dimensions of which, for example, are 0.9x1.68 m. The result is a sofa that can serve as an ottoman. Moreover, both parts of the product are completely independent of each other - if desired, you can easily rearrange the room. However, it must be taken into account that if the model is folded into the “chaise lounge” position, there should be a free space of 50-70 cm between the back of the sofa and the wall of the room.

Small corner sofas can have the same length and width

Small designs include sofas with a chaise longue, as well as trapezoidal-shaped products. The absence of a sidewall and back allowed manufacturers to minimize the size of such models and minimize the area required for their installation.

Children's models of such corner mini-couches as "Malyutka" have a sleeping area of ​​1.85 x 0.7 m with a total design dimensions of 1.3 x 0.75 m.

Parameters of small medium-sized corner sofas

Medium-sized corner sofas are the most widely used. They are in very high demand among buyers. The average parameters of a place to sleep in most of these models are 1.5x2 m. For furniture of this class, this size is considered in a sense a standard.

Medium-sized corner sofas are in greatest demand among buyers.

When assembled, the length of the furniture can range from 2.45 to 2.6 m. This variation in the sizes of small corner sofas is due to their structural diversity. The overall dimensions primarily depend on the width of the armrests. In some models, the design does not provide for the presence of these elements at all.

There are also modifications on sale that have the ability to adjust the position of the armrests and the tilt of the backrest. This feature allows you to achieve maximum comfort.

Important! You should not buy adjustable sofas for the kitchen, since the correct posture for eating is ensured only by a strictly vertical position of the backrest.

The assembled length of a medium-sized corner sofa is 2.45-2.6 m

Taking into account the back, the seat depth of medium-sized sofas ranges from 1.15-1.5 m. In some cases, this figure can reach 1.6 m. The height of the back of the sofa is usually in the range from 0.7 to 0.8 m.

Related article:

Corner sofa: photo of beautiful furniture with a unique design concept

Common design options and types of structures. Selection of high-quality furniture of different styles and colors for different rooms.

Dimensions of large corner sofas for home

As for large structures, furniture in this class includes models with very large dimensions. The length of the berth in such corner sofas is 2 meters or more. Moreover, on sale you can find modifications that are distinguished by a monolithic design or, conversely, are equipped with a transformation mechanism. There are also modular product options, but they are manufactured in accordance with standards.

Large corner sofas can be monolithic or equipped with a transformation mechanism

Additional elements may be included in the set of large corner sofas:

• shelves for storing decorative items;
• tables;
• a small bar with a drink cooling function (usually installed in the middle section of the sofa).

For a sleeping area in a large corner sofa, the size of 2000x1400 mm is considered the minimum, and the maximum dimensions of the sleeping area are 2000x3000 mm.

On sale there are comfortable models of universal corner sofas with a large sleeping area of ​​200x200 cm. They are designed to comfortably accommodate two people, and will not take up too much space when unfolded. Transformable models can be equipped with a chaise lounge, the size of which can be up to 1.9 m, and the length of this element is in the range of 2-2.2 m. These parameters are quite enough so that the module can be used for sleeping without opening the sofa itself.

In addition, in the category of large corner sofas, a special place is occupied by radius structures that look like a semicircle. They have a stylish design and look very presentable.

Mostly radius sofas are designed in techno, loft and hi-tech styles, although customers can order the manufacturer to produce models in a classic style. The size of the structure depends on the number of sections assembled. The main thing is that the sofa allows people to move freely in the room.

As a rule, large corner sofas are made to order

Note! Manufacturers mainly produce large corner sofas in individual sizes to order in a single copy. As a result, the buyer receives a product with a unique design and configuration, which he chooses himself, and can even offer his own furniture sketch.

We should not forget that installing a radius structure requires much more space than a sofa with a classic right angle.

Advantages of custom-made products

Having decided to purchase a corner sofa, the consumer is guided by the criteria of ergonomics and aesthetic appearance. At the same time, the factor of “fitting” of the product into the interior of the room, price, and so on are also of particular importance. It is often difficult to choose a corner sofa model that meets all your needs. This does not mean that the products sold by retail outlets are bad, but for the most part they cannot provide the individuality and uniqueness of the project, taking into account the needs of the discerning buyer.

The advantages of custom-made products are undeniable:

• design taking into account the interior style;
• the ability to select the desired overall dimensions of the model, even the standard height can be changed;
• type of folding and other design features - at the request of the customer;
• organization of the storage system (locations and capacity of compartments and drawers);
• the ability to select materials and components will not only allow you to purchase a piece of furniture that meets all its characteristics, but also save money.

In most cases, a corner folding sofa made to individual sizes costs more than a ready-made analogue. However, the obvious advantages of such a product will more than cover the one-time costs incurred. The main thing is to make prudent choices.

Dimensions of corner sofas and prices: photos of designs with different transformation mechanisms

When choosing a sofa in a furniture store, you may be faced with a huge price range, and the gap between the minimum and maximum cost of products can amount to tens of thousands of rubles.

This difference is explained by the fact that many factors influence the formation of the price of a sofa:

Variant of sizes of a corner sofa with a transformation mechanism “Eurobook”

• transformation mechanism;
• structural design;
• product configuration;
• upholstery material;
• the degree of reliability of the frame and the material from which it is made;
• dimensions of the sofa and the size of the sleeping place.

Models equipped with “Book” and “Click-Click” transformation mechanisms are considered relatively inexpensive. American and French “folding beds”, as well as sofas such as “Accordion” and “Dolphin” have a more complex structure, so their price is much higher. In general, it is justified, since the listed designs are more convenient to use, comfortable and have expanded functionality.

Note! The more complex the transformation mechanism, the higher the cost of the sofa.

If we consider the upholstery material, the price categories are distributed as follows:

1. Inexpensive - jacquard fabrics and cotton.
2. Average price category - flock, eco-friendly leather, velor, chenille.
3. Expensive - animal skins and genuine leather.

The category of budget products includes sofas with a frame made of chipboard and plywood. More expensive designs have a metal or wooden frame. Products made from birch, spruce and pine will cost less than sofas made from valuable wood.

The price of a corner sofa will depend on the design, mechanism, upholstery, dimensions and quality of the frame

The shape of the sofa and its configuration are of considerable importance. Standard size models in a classic design are more affordable. Sofas designed by professional designers are more expensive.

The relationship between sofa sizes and cost: product prices

Since the price is influenced by various factors, when buying a sofa you need to consider all the features of the models you like.

Table of cost of sofas taking into account the size of the bed:

Cost table for sofas with different upholstery:

Note! The cost of the product is also influenced by the manufacturer's brand. Sofas from popular and trusted companies are overpriced.

Cost table for sofas with different transformation mechanisms:

Quality characteristics important to the consumer

Many people are interested in how to choose a quality sofa. In order not to make a mistake when searching, you need to carefully study the features of the models offered for sale. The following data is of greatest importance to the buyer:

1. The material from which the frame is made. The rating of the best options is headed by natural wood, for example, mahogany, oak, beech. However, metal bases are also good, as they are characterized by increased reliability and a long service life.
2. The material with which the furniture is filled. Most often, manufacturers use artificial types for this purpose, for example, foam rubber or foam. If you are planning to buy the best sofa for sleeping, go for a box spring model.
3. Upholstery material. In this situation, much depends on the goals and operating conditions. For the office, as already mentioned, leather products are good, for the bedroom - fabrics, for example, chenille, jacquard or tapestry. Only you can choose which is better, because each option has its own characteristics and advantages.
4. A mechanism used to unfold furniture. Here a lot depends on the conditions of use. If we need a sofa to sleep on every night, we choose products with a sliding mechanism. We pay attention to books and Eurobooks, as well as sofas with folding sides or a roll-out bed. The drawings will help you make the right choice. The listed options are great for equipping a small room. Speaking about their advantages, I would like to note the high reliability of the products. They can be laid out over and over again without fear of breakage.

Also, the quality of the product is determined by the country of origin. The best quality corner sofas are produced in Italy. They are distinguished by aesthetics and high strength.

How to choose a corner sofa? Look through the photos to choose the option that suits all the parameters. A high-quality photograph will help you make the right choice.

Transformation mechanisms in corner sofas: photos of large, medium and small designs

The built-in transformation mechanism allows you to get a comfortable bed from a corner sofa for the living room; the size of the sleeping place depends on the folding method. The most popular models are those equipped with the Dolphin transformation system. In these designs, the sleeping area is located under the seat. To get a bed, you need to roll out this block and then lift it a little. The width of the berth will consist of the width of the roll-out section and the width of the seat itself.

Designs with the Dolphin transformation mechanism have different sizes. These are mainly corner sofas with a sleeping area of ​​160x200, 158x222 and 115x210 cm.

In the corner sofa "Accordion" the width of the berth corresponds to the length of the assembled structure

In sofas with the “Eurobook” mechanism, the seat moves forward, and the backrest is lowered into the space freed up after this. In such models, the width of the berth is formed from the height of the backrest and the width of the seat, and its length corresponds to the length of the latter. With small dimensions of the sofa, equal to 132x210 cm, the size of the seating area is 130x190 cm.

The “French folding bed” transformation system is much less common in corner sofas. It is an unfolding mechanism. The sleeping place in the structure is stored rolled up. During transformation, this part unfolds and moves forward. Typically, the length of this block is 200 cm.

The principle of operation of the “Accordion” transformation mechanism resembles the movement of the bellows of an accordion. The width of the berth corresponds to the length of the assembled sofa, and its length can reach 200 cm. The most common models have a seating area size of 195x140 and 195x120 cm.

Corner sofas with a Dolphin transformation mechanism can have different sizes

Note! The minimum permissible length of a seat designed for two people is 1.2 m. However, sofas measuring 1.9 m are considered comfortable. In such models, the seats will be comfortable for people of different sizes.

Main types of models

A corner sofa is a combination of an armchair and a straight sofa. This configuration allows for efficient use of living space and is great for eliminating blind spots. The main advantage is that additional space is created in the room for relaxing and receiving guests. However, purchasing a corner model requires knowledge of a number of nuances.

The range of corner systems is presented in three types: transformable, modular and monolithic.

The transformable type design is equipped with folding, running or sliding mechanisms that allow it to be transformed into a sofa bed by increasing the overall dimensions. The most common are: Eurobook, tango, dolphin, Spartak, etc. These models have more advantages than disadvantages. A significant disadvantage is the inability to use every day due to the design features. In Eurobook and Dolphin mechanisms, for example, the surface of the folding part is quite hard, and the elastic base is much softer, which creates certain inconveniences. The main advantages of transformers:

1. The design quickly unfolds and this allows you to intelligently use the usable area of ​​the home.
2. Reliability and durability are guaranteed by the minimal use of moving mechanisms.
3. You can get more seats almost instantly.
4. Interior drawers are ideal for storing bedding, eliminating the need for additional closets. This option is especially relevant for rooms whose dimensions do not allow placing a large amount of furniture.

The difference between a modular sofa and other options is that its design basis includes the possibility of transformation due to the arrangement of individual segments, which makes it possible to radically change the configuration. Each component has its own function:

• the straight part of the sofa adjusts its length, thus freeing up usable space;
• the angular segment participates in the formation of one or more protrusions;
• armrests separate parts of the sofa from each other;
• Beanbags are additional soft seats.

Modular corner systems have a number of advantages:

• the size of the sofa, the number of segments and configuration can be determined independently, thus deciding which area to leave free;
• almost all modules are equipped with storage boxes;
• you can instantly change the shape, freeing up the necessary space in the room;
• armrests can replace bookshelves or a coffee table.

The choice of modular designs for small spaces is very limited. When decorating a room, you must strictly follow the rules for choosing corner furniture and take into account design features. Products designed for frequent reorganization are very expensive.

A monolithic structure almost always has the shape of a semicircle and is not dismountable. This option requires large areas and is therefore very often used in public areas or spacious living rooms. The main advantage of the model is its long service life, since the design does not contain transformation mechanisms that can quickly fail. The disadvantages include the inability to straighten out and create a place to sleep.

Transformer

With storage box

Modular

Semicircular

How to choose a corner sofa: tips for choosing furniture and creating an interior

To choose the optimal size sofa, you must take into account the dimensions of the structure when folded and opened. In addition, the size of the sleeping area, the type of transformation mechanism, as well as the presence of additional features, for example, the presence of a bar for drinks, shelves or drawers designed for storing linen, are important.

At the purchasing stage, it is very important to determine the main functions of the sofa.

First you need to decide on the place where the sofa will be installed. Next, the necessary measurements are taken. The corner of the room is measured carefully, and a small margin is added to the result obtained. In addition, you need to determine the size of the space required to install the sofa in the room, as well as the distance to corners and walls.

Then you should decide for what purpose the sofa is installed in the room, and determine what its functions will be:

• zoning of space;
• accommodation of guests;
• a place for permanent sleep.

Don't forget about the number of seats. If the sofa will be used by one person, 1.3-1.4 m will be enough. Quite often, corner furniture is bought by married couples as a relaxation area and a place for permanent sleep. In this case, the minimum length of the product should be 1.7 m, however, models in which this figure varies between 1.8-2.1 m would be more suitable.

Three-seater sofas, the length of which can sometimes reach 3 meters, are in considerable demand among buyers with large families. Before purchasing such a piece of furniture, you must take into account the dimensions of the room in which it will stand. Three-seater sofas usually have a length of 2-2.5 m, and their width ranges from 0.8 to 1 m. Such models are too large for ordinary apartments - they are more suitable for studios.

When purchasing a sofa, you need to consider its folded and unfolded size.

Manufacturers also produce four-, five- and even seven-seater sofas. The height and width of such structures are the same as those of standard models, and the length of the sofa can be any. This indicator is selected in accordance with the needs of the buyer and the quantitative composition of his family. The optimal width of one seat is 0.7-0.8 m. Taking this into account, you can independently calculate the length of the structure you need.

Note! The design of the model is also important. Products made in the high-tech style are more compact than similar modifications in the Baroque style.

Frame of U-shaped sofas

The material and build quality directly affect the service life of the product.
Read also: Euro sofa cover

The most popular material among furniture makers is wooden beams.

Dried hardwood is best suited: beech, oak, walnut. The use of coniferous species: spruce, pine, larch is allowed in products of a lower price range.

Multilayer timber made of plywood has proven itself to be quite good. When assembling a case from chipboard, the final product will be too heavy; in addition, such cases are afraid of moisture, and we should not forget about the harmful fumes of phenol-formaldehyde resins.

The most reliable is a frame welded from profiled pipes and metal profiles. Typically, such designs are used for elements of non-standard shape.

Dimensions of corner sofas for the living room, bedroom and other rooms

Sofas with a corner design are quite often purchased for the kitchen. They provide additional seating, a sleeping area or can be used for storage. The sizes of such models are very diverse. Durable materials with water-repellent properties are used as upholstery.

A folding corner sofa will be an ideal solution for a living room combined with a bedroom

Since the kitchen is a limited space, the use of sofas is allowed, the central part of which is much smaller than most models. Their size is about 1.9 m. Such modifications do not have a folding mechanism, so they can only be used to organize additional seating.

Sofas in the bedroom for children are compact in size. The dimensions of these structures depend on the presence or absence of a transformation system. If the model folds forward, its length will be 1.7 m. Sofas that fold out lengthwise may be larger.

Sometimes the length of such products reaches two and sometimes three meters. Children's sofas have bright colors and allow you to create a comfortable place to sleep in the room, saving space for games. It is advisable that materials made from natural fibers that are easy to clean are used as upholstery.

The sizes of corner sofas for the living room or bedroom are the largest. Most often, the length of structures is 2.3-2.8 m, although there are also larger products. Basically, such models have the ability to transform, allowing you to create a spacious place for sleeping, accommodating unexpected guests for the night, or permanent rest of the owners.

Sofas for living rooms and bedrooms are covered with woven materials. Latex made from foam rubber is used as filling. Thanks to this material, the sofa acquires orthopedic properties, becomes hypoallergenic and breathable.

Corner sofas are suitable not only for the home, they are widely used for furnishing office premises where it is necessary to design areas for various purposes:

For a spacious living room you can purchase a large elegant corner sofa

• kitchen;
• entrance group and reception;
• meeting rooms and private offices.

Helpful advice! Office sofas must be decorated in a simple style. Their design is aimed at making the premises look respectable. Leather upholstery is best suited for these purposes.

Do you need it?

First of all, you should understand whether you need a dressing room and what place it will take in your apartment. An illiterate approach to planning your home will only make things worse. A separate dressing room, turning a simple choice of clothes and changing into a ritual, is a real dream of many girls. Do you think your dream will never come true?

But isn’t it more logical to just store all your things in a closet if there’s already not enough space in the house? At first glance, this seems to be the best solution. The problem is that individual parts of the family wardrobe will be scattered around the apartment in various closets.

Now just count how much space all the cabinet furniture in your apartment where clothes are stored takes up. If it is more than 1 square meter, it is definitely worth thinking about organizing a separate dressing room or at least a zone. It will give you many positive effects.

1. You can forever say goodbye to bulky cabinets that you have in different rooms. Racks, hooks, hangers and shelves - there too. Now everything will be stored in one place more compactly. It turns out that you will save more space in your apartment and actually make it more spacious.
2. It’s easier to find the thing you need in the dressing room. You know where everything is, so even in conditions of total chaos you will find your way faster. If you like order, you'll assign groups of things their own zones and handle them even faster. It is worth remembering that the dressing room is always lighter than the closet. This property will also help you find things faster.
3. No matter how big your closet is, it doesn't use up all the floor-to-ceiling space, which is common in a walk-in closet. Even a small dressing room can hold much more clothes than a tall, spacious wardrobe.
4. Things that are stored in a properly equipped dressing room retain their freshness and pleasant appearance much longer. The effect can be enhanced if the room has a good ventilation system. In some cases, people use special clothes fresheners.
5. In the dressing room there is less chance that you will get parasites or fungi even on clothes that have been lying in one place for a long time.