How to care for a matte kitchen

Matte kitchen sets with facades made of MDF and plastic are at the height of fashion. In order for the furniture to look like new for many years, it is important to know how to care for a matte kitchen, what cleaning products and items can and should be used, and which ones should absolutely not be used.

There is an opinion that stains, abrasions and damage are more noticeable on glossy surfaces than on matte ones. In part, this is true, but this advantage does not at all exclude timely care of furniture.

General rules for caring for matte kitchens

Greasy deposits on facades, wall panels, and countertops are a mixture of fumes, dust and drops of grease. The less often you wash a matte kitchen, the more difficult the cleaning process is, the more time it takes to restore order. The most important rule comes into play here: the cooking process must be clean!

Think over your personal individual schedule and method of cleaning furniture, taking into account your daily routine, busy schedule, and frequency of cooking;
Carefully read the instructions for caring for the headset. Manufacturers, as a rule, recommend the best option, taking into account the materials and components used;
Test cleaning products on a small area before use;
Wear protective gloves.

Kitchens to order

Advantages

Enamel facades have a spectacular, attractive appearance. The coating is resistant to ultraviolet radiation, so such kitchens can be equipped in country houses and sunny rooms facing south. The enamel does not fade and does not lose its brightness and shine.

A large assortment of colors that are used in the manufacture of cladding (it can be monochrome and with complex patterns or designs) will facilitate the choice for a specific stylistic design of the kitchen. It is possible to order a set of various shapes: straight, rounded.

Enamel facades are resistant to high temperatures and humid environments. They have no edge so they look like they are completely covered in enamel. The environmental safety of enamel coating is a significant advantage when choosing cladding for kitchen decoration.

How to clean a matte kitchen?

Timely care will require a small investment of time and inexpensive purchases; you will need:

mild detergents that break down fats;
soft cloth napkins (microfiber, flannel);
sponges and disposable paper towels.

When caring for furniture you should not use:

steam cleaners;
accessories and products with abrasive particles containing chlorine, sodium, alkali.

The alcohol solution should be used with caution.

Preparations for cleaning household kitchen appliances

To keep household appliances clean, preparations are used that effectively remove grease and restore the appearance of appliances without damaging the surfaces.

The grease remover is making noise

The product shows high efficiency in removing even difficult stains on the surface of household appliances in the kitchen. It copes with gas deposits and other types of contaminants. The use is very simple - the product is applied to the surface and left for just a few minutes.

Advantages:

high efficiency;
quick achievement of results;
suitable for removing old stains;
ease of use.

Minuses:

pronounced unpleasant odor;
price;
cannot be used to treat aluminum and painted surfaces of devices.

Cost – from 250 rubles. Read reviews here, here and here.

GraSS Azelit gel

The product is available in the form of a concentrated gel. Suitable for washing:

Slab.
Oven.
Microwave.
Grills.
Deep fryers and other equipment.

Pros:

very economical consumption;
high efficiency;
does not have a strong odor;
fast action.

Minuses:

requires thorough rinsing;
use only with gloves.

Price – from 200 rubles. Read reviews here and here.

Synergetic for slabs

Synergetic is designed to remove carbon deposits and soot from:

Slab.
Microwave.
Ovens, etc.

Pros:

efficiency;
no strong smell;
biodegradable product;
convenient application.

Flaws:

use only with gloves;
exposure time is several minutes.

Cost – from 200 rubles. Read reviews here, here and here.

How to clean a matte kitchen

The surfaces of modern kitchen facades are well protected, but require timely and gentle care. To monitor the headset, you will need:

soap, shampoo or gels that gently break down fats;
microfiber, flannel, felt cloths;
soft sponges and disposable paper towels.

Can not use:

scrapers, knives, blades with abrasive inserts, metal brushes;
steam cleaners (suitable for solid wood kitchens);
products containing chlorine, sodium, alkali;
alcohol products (it is allowed to use a weak solution of ethyl alcohol to remove stains and treat plastic facades);
products containing abrasive particles;
home remedies - vinegar, soda, lemon juice (there is a high probability of damage to surfaces if the dosage is incorrect).

Catalog of matte kitchens

How to wash matte kitchens made of MDF in film

Film facades do not tolerate products containing oils and wax. The film loses elasticity and color, swells and peels off. It is recommended to wash matte MDF facades with soap, use an alcohol solution, or silicone-based polishes.

Prepare a mild soap solution and a soft sponge;
To remove stains, add a weak solution of alcohol;
Apply the composition and rinse several times, removing traces of soap;
Wipe the surface dry using a microfiber cloth;
Apply polish for protection.

Kitchens to order

How to wash matte painted MDF kitchens

Experts note that a matte kitchen with painted facades is more practical to maintain than kitchen sets with laminated and varnished components. The paint has high adhesion, but does not tolerate solvents and abrasives.

When dirty, wipe off the dust with a damp cloth and remove greasy stains with mild detergents.

You will not go wrong and will not damage the furniture if you clean matte kitchen facades using a soap solution without adding abrasive particles, silicone polishes for cleaning and protection.

Prepare a soap solution, remove dirt;
Wash several times until the soap marks disappear;
Dry the surface with a fiber cloth or paper towel.

How to clean matte plastic kitchens

To clean plastic facades, it is preferable to choose products that do not contain abrasive particles, acids, or chlorine.

The method of care is delicate, using a soap and alcohol solution to remove greasy stains.

Apply cleaning compound;
Clean the facades from dirt and wipe with a sponge several times until any soap marks disappear;
Wipe the façade dry.

Catalog of matte kitchens

Method 1. Express cleaning and polishing for advanced cases (soda + vegetable oil)

PURPOSE: wooden UNpainted kitchens and countertops (coated with matte varnish, oil, wax, polish, any impregnations), varnished and laminated kitchens made of MDF and chipboard, aprons made of any materials.

This recipe is especially helpful if you need to bring an old kitchen or countertop back to life with minimal time and money.

With its help, you can, firstly, easily remove tightly adhered drops of fat, plaque and stains. Secondly, to “seal” the pores of the wood, protecting it from moisture and dirt. And thirdly, to give the facades a natural shine and brightness. Essentially, this old homemade recipe replaces both cleaner and furniture polish.

CAUTION: Painted wood kitchens and light wood kitchens (oil may yellow slightly).

CLEANING FREQUENCY: It is important that cleaning with soda-oil cleaner is carried out regularly - at least every 2 months. The fact is that oil tends to oxidize and lose its protective properties, possibly changing color.

Step 1. Mix 1.5 tablespoons of baking soda with 1 tablespoon of vegetable oil (you can use more in a ratio of 1.5:1).

Step 2. Apply the resulting “scrub” to contaminated surfaces, paying special attention to cabinets in the stove area. The soda will crumble a little, and the oil will be absorbed like polish. You will see that the tree will become cleaner and a little brighter before your eyes.

Step 3: Wipe treated areas with a clean, damp microfiber or soft cloth.

Step 4. Wipe the remaining cabinets from dust and light dirt with a damp cloth. If necessary, you can treat the entire kitchen with an oil-soda solution.

How to remove grease stains

If you cook on the stove, then oil splashes will inevitably fall on the countertop, wall panels and facades. A water solution of liquid detergent helps to clean matte kitchen facades from greasy stains.

Add a few drops of shampoo or gel to a container of water and stir thoroughly;
Apply the composition and see how the stains behave;
Make sure surfaces are clean and dry with a soft cloth.

It's not just grease stains that remain on kitchen furniture. Stains left by:

splashes of water;
tea and coffee;
red wine;
turmeric;
beet and tomato juice;
juices from berries;
tobacco smoke.

Traces are especially noticeable on light-colored facades and countertops; if quickly detected, they can be easily washed off with water. Over time, they eat into the surface, and to remove them requires special means and time. In such cases, it is better and safer to use an alcohol solution.

Method 5. Hydrogen peroxide + water

INTENDED USE: Only for kitchens, splashbacks and countertops made of MDF and chipboard. The product will help not only clean the kitchen of grease and dirt, but also disinfect the areas treated with it.

It is permissible to clean a wooden kitchen with hydrogen peroxide, but only if you need to remove mold.

CLEANING FREQUENCY: If necessary.

INSTRUCTIONS:

Mix these ingredients in a 1:2 ratio, treat the desired areas with the resulting liquid using a rag (it is best to spray the product from a spray bottle).

How to clean a matte kitchen from stains

If you choose and use the wrong detergents, you often have to clean a matte kitchen from stains. In this case, you need products that gently but effectively break down fats and do not contain ammonia and acids. For care and protection, you can use silicone-based furniture polishes.

Moisten a soft cloth with a small amount of product;
Clean the facade from dirt and immediately polish it with a dry cloth.

Catalog of matte kitchens

Conclusion

Buying matte kitchen furniture, especially custom-made ones, is an opportunity to decorate the space beautifully and comfortably, taking into account your preferences. Practicality, the ability of furniture to maintain its appearance at minimal cost is an important point that should be paid attention to when developing a design project.

Ask the experts which facades are easier to care for, choose an option based on color, texture - find a solution so that during the most ordinary cleaning it will be easier for you to wash the matte surface of the kitchen unit and easily return it to its proper appearance.

Types and features of coatings

Manufacturers of kitchen sets and countertops successfully combine various materials. Most often it is chipboard or MDF, laminated (painted). Acrylic paint coatings compete with plastic, and decorating with cheap PVC film helps change the appearance beyond recognition. This is how moisture-resistant, durable stone, natural wood, and futuristic slabs are created.

Each material has both strengths and weaknesses. Accordingly, specific cleaning agents are used for them.

Plastic

The use of cheap, durable and unpretentious plastic elements in the manufacture of furniture minimizes the risk of somehow damaging cabinets and cabinets if handled carelessly. Polymers are not afraid of water, can withstand contact with hot dishes, and do not fade. Another advantage of the material is the low weight of plastics: in comparison with metal and wood, they are much lighter, without loss of overall rigidity and reliability.

Dye

The traditional method of processing facades is painting, used to create durable, abrasion-resistant coatings on the surfaces of pressed MDF boards. According to the technology, a paint layer is first applied, and then a varnish is applied (to create a glossy effect). Some difficulties lie in the increased requirements for preparing the base: the absence of potholes, gaps, and roughness. This is ensured by repeated grinding of the material with abrasives and sandpaper.

PVC film

A polymer film applied to the surface of the material by pressing is a budget solution. The consumer can choose white, blue, red, black and other colors to his taste, of which the manufacturer has plenty in stock.

The advantages of the material are wear resistance, strength, and low cost.

But it is better to avoid contact with water - PVC coating is sensitive to it, especially at unprotected joints and edges.

Acrylic

Acrylic materials are polymer materials, which means they are fully endowed with the advantages and disadvantages of plastics. The method of applying a layer of plastic to the main surface is gluing. The coating is durable and easy to maintain.

Painted MDF with varnish

MDF is considered a hygroscopic material; without special protection, the board quickly becomes saturated with moisture and collapses. To do this, it is painted and coated with a special varnish. The coating will protect MDF, but at the same time it is sensitive to abrasives and aggressive compounds.

For cleaning plumbing

Washing plumbing requires high-quality cleaning and disinfection . This is especially important for the kitchen.

Dr.Beckmann, Miracle paste 3 in 1

The paste is a universal product in concentrated form, which is suitable for caring for various surfaces.

Pros:

universal product;
high efficiency;
surface polishing;
no unpleasant odor;
can be used even without gloves;
good surface distribution.

Cons: high price. Cost – from 500 rubles. Read reviews here, here and here.

CHISTIN Universal

The universal preparation can be used for cleaning plumbing fixtures and washing floors. The sanitary product contains chlorine.

Advantages:

Disinfection.
Removing rust.
Mold protection.
Affordable price.
Elimination of limescale.
Versatility.

Flaws:

repulsive odor;
it takes a few minutes to take effect.

Price - about 100 rubles on average. Read reviews here, here and here.

Organic People spray Eco

A universal eco-friendly product designed for washing plumbing fixtures and tiles.

Advantages:

versatility;
removes lime deposits;
removes unpleasant odor;
hypoallergenic composition (contains citric acid and soda);
environmentally friendly product.

Minuses:

does not always cope with old stains the first time;
has a pronounced fragrance.

Cost – from 180 rubles. Read reviews here, here and here.

Universal formulations

In the process of washing the kitchen premises, the cleaning should also cover windows, radiators and other surfaces. The specifics of maintaining the cleanliness of glass objects require the use of special household chemicals, and universal cleaning products are suitable for caring for batteries.

Complete cleaning is impossible without washing the windows. For these purposes, special preparations marked “for glass and mirrors” are used. These products are also suitable for maintaining the cleanliness of glass inserts on furniture fronts, glass table tops, chandelier shades, etc.