Dish drying rack in the cupboard: do-it-yourself installation

Every housewife tries to equip the kitchen as functionally as possible. This room houses equipment and items that are necessary not only for the main process - cooking, but also to increase comfort while staying and working. In any kitchen there should be a place for a structure whose purpose is to dry dishes and cutlery.

Dish drying rack in the cupboard

Manufacturers offer a wide variety of models, differing in installation location, dimensions, design, material of manufacture and performance characteristics. They allow you not only to place dishes for drying, but also to organize storage space for the most frequently used items.

What are the requirements for dryers?

After washing, the dishes should dry. It can be wiped dry by hand or left to dry on the table, but it is more convenient to place it in a dryer specially designed for this, where it is installed on an edge or upside down. There it will dry quickly and you won’t have to put any effort into it. There will be no streaks or stains on naturally dry plates and glasses.

Kitchen cabinet dryer

Strict sanitary requirements are imposed on utensils and equipment used in food preparation, since people’s health depends on their cleanliness. Therefore, the equipment of the place where they are stored should be approached responsibly. It is necessary to take into account both the aesthetic aspect and the main purpose of the dryers.

Despite the simplicity of the device, some nuances are important to consider when choosing them.

All structural elements must not be exposed to water. Their coating must ensure the absence of corrosion.
Good ventilation of the placed utensils must be provided.
Most drying systems must have a drain pan installed underneath them, which must be cleaned periodically. To do this, it must be mobile. It is especially important that the material from which the pallet is made is not susceptible to moisture. It must also have a coating that prevents the proliferation of microorganisms.
The dryer should fit harmoniously into the interior of the kitchen space.
The design must be reliable, strong and durable.

An important point that you need to pay attention to is the dimensions of the model and its structure.

Two-level dish dryer with tray, length 40 cm

Dish drainer Tecnoinox Inoxmatic K/5 45 cm

It is important to ensure the ability to accommodate the amount of dishes that is constantly required for the family. When calculating the required dimensions, you should take into account the variety of utensils used.

Dish draining rack 50 cm in a cabinet with hinges

The drying rack accommodates deep and shallow plates, salad bowls, saucers, mugs, etc.

Drying rack with plastic tray, 60 cm

For example: one level of a 600 mm wide model can accommodate 8 large shallow plates, 8 deep plates and 6 saucers.

Dish drainer with transparent tray, 70 cm, gray

White dish drying rack for cabinets 80 cm

Where to buy a dryer

Many may be wondering: “Where can I buy a dish dryer?” and everything is very simple. You can purchase a dish dryer at any furniture store, or if there is an IKEA store in your city, you can look through their range. Approach the issue of buying a dryer extremely carefully and carefully.

Types of designs

When choosing a design, you have to take into account the design features of the room, the number of residents, the preferences of the hostess and financial capabilities. In the kitchen you can install an open structure or tucked away in a cabinet. To save space, corner structures are used.

Depending on the method of placement, several types of dryers can be distinguished.

Troflexes

The simplest type of product is a grate or board with small perforations that is installed on the sink.

Dish drying rack on the sink

When using such devices, water from the dishes flows directly into the sink. Models are also available that can be folded into a roll, which makes them easier to store when not needed. They can be made of plastic or metal.

Troflex

On such a dryer you can install a few dishes to dry, but for one or two people living in the house this is enough. In addition to serving items, you can also place freshly washed food here. Troflexes look quite simple, you can choose them without being particularly tied to the style of kitchen design.

Tabletop

There are many models available that are installed on horizontal surfaces. They can be separate modules for drying cutlery, cups or plates. More functional are combined systems that have compartments to accommodate the entire range of utensils used. Both stationary and folding products are produced. The structures can be easily moved if necessary, they are easy to use - utensils are always at hand. But storage systems installed on the countertop or next to the sink clutter the space. In addition, airborne dirt particles settle on washed dishes.

Tabletop dryer

In order to save free space and create comfortable conditions for the housewife, a stationary structure for drying dishes can be built behind the sink.

Wall mounted

You can hang the dryer in any free space on the wall (usually on the apron) or inside the unit, not far from the sink. This method of organizing space for storing wet dishes allows you to free up the work surface. However, it does not provide tableware with the necessary protection from dust and dirt.

Wall dryer

Built-in

Most often, in modern kitchen sets, special drying cabinets are supposed to be installed to place washed dishes. These modules can be located both on the lower tier and above the sink. The most functional location for storing wet dishes is in a drawer. Usually it is at the bottom. Typically next to the dishwasher.

Dish dryer

The great advantage of closed structures is the protection of the dishes in them from dust and grease generated during the cooking process. It is also important that this method allows you to free up space in the kitchen and hide cutlery behind the facade, which is more aesthetically pleasing. But when storing wet dishes in a cabinet or drawer, special attention must be paid to its ventilation. This is important both for plates with mugs and for the durability of the kitchen set, since dampness has a detrimental effect on it.

Dish drying cabinet

The standard depth of kitchen unit elements is 600 mm. This should be taken into account when choosing a built-in dryer model so that there are no problems with its installation.

Important! When purchasing a built-in structure, special attention should be paid to the quality of the fasteners. The weight of the dryer with the dishes placed in it is decent. It is necessary to eliminate the risk of it falling along with serving items.

Drying racks can be single-tiered or have several levels, which allows you to place plates, cups, and cutlery in them. Such systems are more functional - they do not take up extra space, and you can dry a large number of dishes in a small area. But the disadvantage of most multi-tiered models is that water from objects placed on top gets to those on the lower levels, which is not very hygienic.

The best hanging dish drainers

Not the most popular, but quite convenient option. It’s good if such a model has a tray and several compartments for different dishes. The hanging dryer looks stylish, but is not very spacious.

Nadoba Bozena (27.9x24x30 cm)

4.9

★★★★★

editorial assessment

94%

buyers recommend this product

The chrome-plated steel dryer is mounted on a rod of the railing system. The welds here are made so carefully that they are practically invisible. The model looks stylish and does not sag under the weight of heavy dishes.

Advantages:

Thick rods;
Durable design that can withstand heavy loads;
High-quality chromium-nickel coating;
Accurate execution.

Flaws:

Small capacity.

This drying rack can accommodate a variety of dishes, even quite heavy, thick-walled ceramics - just a little.

Rosenberg RUS-285001 (40x28.5x43 cm)

4.8

★★★★★

editorial assessment

90%

buyers recommend this product

The compact model can be suspended above the sink, and the water will flow directly there. And if the structure is installed above the countertop, a complete plastic tray will help out, which is easy to take out and clean.

Advantages:

Two levels;
Sturdy and reliable design;
Universal design;
Durable pallet;
Attractive price.

Flaws:

There is no compartment for cutlery.

This simple and affordable model with a standard width (40 cm) will find a place even in a small kitchen.

What materials are dryers made from?

Dish drying systems can be made from various materials.

Metal constructions

The most common are metal structures. In this case, the material must undergo processing - galvanization or enamel coating. This is important when operating in conditions of high humidity.

Metal dish dryer

Most often, stainless steel is used, which has a coating that protects it from corrosion (it is important that there are no chips or other defects). These dryers last for a long time, they are durable and functional. Most steel models look very stylish. But stainless steel systems are not cheap. Used in the production of dryers and aluminum. A big plus is that metal products require virtually no maintenance.

Plastic products

Plastic products are cheaper than metal ones (especially stainless steel). Stylish, bright interior items are made from this material. It is important that polymer models are completely unaffected by water, corrosion and rotting. But their other characteristics often leave much to be desired.

Plastic dryers

The mechanical strength of plastics is low. Over time, plastic loses its appearance. Dirt collects in the scratches and chips that form on the surface.

Wooden crafts

In some interiors (for example, country or Provence), stainless steel or plastic dryers will look ridiculous. In this case, you cannot do without wooden structures.

Built-in wooden dish drainer with two shelves

Despite the fact that wood is largely susceptible to the effects of water, steam and temperature fluctuations, with proper pre-treatment of products they acquire the necessary resistance to impact and decent durability. Of course, it is desirable to minimize direct contact with water from such dryers.

Wooden dish drainer

Combinations of materials are also used in the manufacture of dryers.

The choice of type of dryer is purely individual. The main thing is that the design is easy to use and its appearance does not cause dissonance with the design of the kitchen space. The cost of a model is influenced by the material from which it is made, its size, and design.

Important! Products produced under well-known brands cost the consumer significantly more than those whose brand is not very well promoted.

If not a dryer, then a mat!

Instead of a bulky tabletop drying rack, you can use a compact dish drying mat. Its dimensions can be either 30x40 cm or 50x60 cm.

It is very convenient to use a mat for drying dishes: spread it out near the sink, put the dishes after washing, wait until they drain, and put them on the shelf.

There are two types of such rugs:

Products made of rubber, plastic or silicone, with a ribbed or embossed surface. In this case, the water draining from the plates after washing remains in the recesses. Then just drain the water and dry the mat.
Microfiber fabric mats that absorb moisture. An absorbent mat provides excellent protection for your countertop. By the way, microfiber is very practical: it is soft and lightweight, washes well and is durable.

Dish dryer in the closet

Most often, when installing a dryer, the module located above the sink is selected. This greatly simplifies the life of the owner.

Designs in the closet can:

installed on or without a frame;
have one or two levels for placing dishes (the upper one is for cups and glasses, the lower one is for plates).

Two-level dryer
Single-level models, as a rule, are fixed in hanging shelves with a door opening upwards or without doors.

Single level kitchen cabinet dryer

To ensure good ventilation inside the cabinet, they often do not include a bottom edge. In addition, when placing the drying module above the sink, you can ensure that drops of water drain directly into the sink, which simplifies the care of the set. If the cabinet has a bottom, for ventilation it is necessary to make holes in two side walls.

Ventilation holes in the top wall of the cabinet

Standard dryers are produced in lengths of 400, 500, 600, 700 and 800 mm. Between two levels it is necessary to provide a distance of at least 300 mm for storing different types of dishes. Before purchasing a product, you need to find out the exact dimensions of the headset module where it will be installed, and you need to pay attention not to the external dimensions, but to the internal ones.

Dish drainer sizes

Each kitchen interior has its own parameters and requires the placement of furniture and accessories taking into account the area. Dryer sizes vary in size. Volumetric drying will not fit into small-sized kitchens; it will stand out from the general style. Likewise, a compact model will not look good in a spacious room.

If the set does not contain a built-in dish dryer, you can always separately order its production in the dimensions that will ideally fit into your kitchen space.

Currently, designers have developed dish holders that are unusual in shape and size.

If you are against humid air in the closet where the drying structure is located, you can purchase an open model. Moist air will not accumulate in it, and the dishes will dry much faster. True, you will have to put up with the fact that dust settles on the dishes. If you use dryer sets every day, then this is no longer relevant.

Create an atmosphere of coziness and comfort in your kitchen. Make the work of apartment owners easier not only by purchasing modern models of household appliances, but also by purchasing the right accessories. They will decorate the interior of your kitchen. And caring for dishes and utensils will become a more attractive activity.

Instructions for installing a dryer in a closet

As a rule, manufacturers provide fasteners and installation instructions complete with products. In the event that neither one nor the other is available, you can install the dish dryer yourself, armed with a tape measure, a pencil and a screwdriver.

Instructions are provided for installing 25 cm wide dryers in a 30 cm deep cabinet.

Table. Materials and equipment required for work.

Name	Illustration
Two dryers (upper and lower level)
Self-tapping screws with a wide head, 25 mm long (4 pcs.)
Screwdriver
Roulette
Pencil

Important! Self-tapping screws must be chosen of such a length that they do not go through the walls of the cabinet. In our case, the wall thickness is 19 mm, but to attach the shelves it is necessary that the screw head protrudes above the surface. Therefore, fasteners 25 mm long will do.

Table. Installing a dryer in a closet.

Step, No.	Description
Step 1	The dimensions of the dryer are measured.
Step 2	Markings are applied to the inner surfaces of the cabinet sides. The lower level will be installed at a distance of 15 cm from the bottom of the cabinet, and the upper level - 50 cm (take into account that at least 30 cm must be left between dryers). Since the width of the products is 25 cm, it is enough to retreat 7 cm from the back wall and from the facade.
Step 3	Using a screwdriver, self-tapping screws are attached to the two side walls. Their caps should protrude by about 7-8 mm.
Step 4	Shelves for dishes are placed on self-tapping screws.

The result is a strong and durable design

Video - Installing and assembling a dish dryer with your own hands

Cabinet dryers offered by manufacturers

If you want to organize a place to store wet dishes, you need to decide on the installation location of the structure. Various models of dryers are available for various kitchen modules.

Drying with plastic inserts

The single-level stainless steel model is equipped with hygienic plastic inserts, the location of which can be changed. The design is quickly mounted on the sides of the cabinet (thickness from 16 mm) thanks to spring-loaded fasteners. This product can be placed in a hanging shelf. If desired, you can also purchase a two-level model. The most convenient place for her is the cabinet above the sink.

Drying with plastic inserts

Built-in module with titanium coating

The built-in dryer consists of two levels. It is made of stainless steel, aluminum (upper and lower frames) and plastic (tray). The width of the structure is selected for the kitchen module. It can be 600, 800 and 900 mm. Depth - 355 mm. The product can also be installed in cabinets without a bottom wall.

Plug-in module

Drying on frame

The two-tier model, made of stainless steel, consists of a telescopic frame, two grids (high - for plates and flat), side holders for the upper grid and a plastic tray. It can be installed both in regular cabinets and in modules that do not have a bottom. It is possible to select a product for facades with a width of 460 to 900 mm.

Drying on frame

Bottom cabinet dryer

The single-tier model is equipped with ball guides and a closer for convenient operation. It is intended for installation in a lower module with a width of 600 mm. The dryer has several compartments to accommodate various types of dishes and is equipped with a tray.

Bottom cabinet dryer

Pull-out basket

The dryer has an interesting design. It is distinguished by the thoughtfulness of organizing the placement of various types of dishes. Each type of serving utensil has its own place. This ensures their stability and safety. To drain water droplets, there is a tray made of safe plastic, which can be easily removed. The guides have synchronization and a closer. The dryer can withstand the weight of placed dishes up to 40 kg. The consumer is offered options for installation in standard and wide modules.

Pull-out basket

If desired, you can also install a compact desktop model on a shelf in the closet.

When decorating a kitchen and selecting equipment and interior items, you should not lose sight of any details. The entire environment should allow you to create the most comfortable environment for cooking and simply being in the room. Installed dish dryers allow you to avoid wasting time wiping wet items. They help place everything you need within easy reach.

At what height should a dish dryer be installed?

The Best Countertop Dish Drying Racks

Such models are always visible because they stand right on the table. This means you will have to select a dryer that suits the interior. It can be folding, have several tiers, as well as special compartments for glasses or cutlery.

Umbra Holster (16.57×13.54×5.87 cm)

4.9

★★★★★

editorial assessment

95%

buyers recommend this product

A high-quality dryer made of plastic and stainless steel in dark gray color fits well into almost any interior. The Umbra Holster steel frame is installed on a tray into which water flows. Here it does not stagnate, but flows down the drain into the sink.

You can change the configuration of the dryer by rearranging the removable elements: a glass for cutlery, a narrow compartment for knives, a stand for glasses and mugs. These parts can be mounted outside or inside the base of the frame.

Advantages:

Spacious rack for 15 plates;
Ability to change configuration;
Compactness;
Easy to wash;
Stable storage of dishes.

Flaws:

Designed for a small amount of utensils.

The dryer must be installed with a drain into the sink, otherwise water will pour onto the countertop.

Kamille KM-0765A/KM-0765B (55x24.5x37 cm)

4.9

★★★★★

editorial assessment

92%

buyers recommend this product

Steel dryer with chrome finish and plastic water tray. In addition to a plate rack, there is a cutlery stand and a holder for mugs and glasses. The model is spacious, reliable and stable.

Advantages:

Compact design;
Removable, easy to clean tray;
Presentable appearance;
Two levels for different purposes;
Corrosion resistance.

Flaws:

The black tray shows streaks and traces of dried water.

This stylish fixture is suitable for any kitchen interior.

Polimerbyt 4323000 (37.6×29.5×7.8 cm)

4.7

★★★★★

editorial assessment

85%

buyers recommend this product

A simple and inexpensive plastic dryer is easy to clean and compactly stored after use. The plates stand on it firmly and do not wobble. The manufacturer offers two color designs for the product.

Advantages:

Bright design;
Pallet with high sides;
Several compartments;
Durable plastic;
Affordable price.

Flaws:

Not suitable for every interior.

This model is usually not left in a visible place, but is stored in a closet after use. It copes with its main task perfectly, but looks downright cheap.