How to assemble a bed with a pendulum: instructions for assembling a children's transformer and other beds with longitudinal and transverse swing, installing a round cradle, drawers, etc.

What is a pendulum bed

First you need to understand what a transformable pendulum crib is. A transformer is usually a product that combines several functions; in addition, it can easily change depending on the age of the baby.

Such a crib can perform several functions. Typically, a transformer contains several elements:

1. Frame.
2. Mattress bed.
3. Boxes for storing linen.
4. Sides for holding the child.

Most cribs with pendulums also have special drawers for storing linen. The transformer is distinguished by the fact that in addition to the bed, it also contains containers for storing things. It may also change depending on the age of the child.

Depending on the age of the child, the height of the crib may vary. When the baby is very small, the mattress bed can be installed at a higher level so that the mother does not need to bend low and strain her back. When the baby grows up and begins to be interested in the world around him, so that he does not fall out of the crib, the mattress bed is lowered and the sides reliably protect it.

When the child grows up, the mattress bed can be lowered, thereby increasing the height of the sides. The pendulum mechanism allows you to imitate the natural motion sickness of the mother. Thanks to this, the baby easily falls asleep, and the mother does not need to hold him in her arms.

Rocking a child in such a crib is easy and very convenient. Moreover, the mechanism has a lock so that the bed does not constantly rock. It is precisely because of such a large number of mechanisms and parts that the assembly of a children's bed with a pendulum and transforming elements is the most difficult.

The pendulum mechanism creates a comfortable motion sickness for the baby in the crib.

Which one to buy: types of bedroom furniture for babies

Girls, does anyone know how to fix a pendulum crib? The baby is already a year old and cannot sleep in his crib.

If necessary, the rocking chair can be in a stationary position; for this purpose, special clamps located at the bottom of the side panels are used.

The model includes a frame, bed, legs, backrests, and a pendulum mechanism. Many products are complemented by drawers, changing pads, and chests of drawers for storing things. In what sequence to assemble a children's bed with a pendulum according to the instructions:

1. The back part is connected to the side strips using screws.
2. The berth is first mounted on screws, then on guides located on the sides.
3. The structure is turned over to install the pendulum mechanism.
4. Linen boxes are inserted, the side wall of the pendulum is fixed with screws.
5. All plugs are closed.

And I bought my crib completely unexpectedly for myself - I ran into the store 5 minutes before closing just to “feel” the material, and in the end I paid for it on the same day, and was also very pleased with it. You could store the crib with them even until the birth of the child, and delivery was carried out within 3 days after the call.

An additional function of the crib is a pendulum mechanism. It allows you to simplify the process of rocking your baby. But it should be remembered that the pendulum should be used only in the first months.

But here, it seems, the mattress is placed on boards, as they are called, chipboard, and for protection there is just such a small fence. There's a fence inside. Or is it just for the mattress?

Beech is the most durable and wear-resistant type of wood; 87% of Italian furniture is made from it. And the Italians boast of their approach to the selection of quality materials for the manufacture of furniture. Therefore, a transforming bed made of solid beech is a very reliable and environmentally friendly design

Separately, you should pay attention to the paintwork of the transforming crib

Let's start assembly. The timber was connected to the dowel using a countersunk screw and wood glue. Probably it was possible to do without screws, but I wanted it that way. All holes were filled with putty.

Assembling the crib

Practice shows that modern cribs mostly have multifunctional parts. Standard parts are:

• bed frame;
• supporting part of the mattress;
• special sides (can be soft or made of fabric);
• niche for linen or without a drawer;
• pendulum mechanism.

Let's start with the preparatory work:

Please note that it is better to assemble the crib in the child's room. This way, you don't have to drag it around the entire apartment. After you have removed the packaging, set the larger pieces aside and place the smaller pieces on a light-colored fabric. Place all the necessary tools near you

Be sure to read the instructions before assembly. Make sure that all the necessary parts, bolts and operating systems of the crib are present. Do not neglect studying photographs, drawings or diagrams. This will greatly facilitate your work and speed up the assembly itself.

Once all the above preparations have been completed, we move on to the assembly process itself:

• We always start work with the main structure, namely the fixed back wall. Define top and bottom. All side walls have legs.
• Place the back wall on the floor with the inside facing up. This way you will see the necessary grooves for fastenings. Tighten the screws correctly to avoid stripping the threads and damaging the furniture itself.
• After this, we move on to the bed - the supporting part of the mattress. This is a kind of wooden or plywood rectangle made of transverse slats. The supporting part itself should be secured with screws. But don’t rush to screw them tightly. First, choose the optimal height. Professionals advise choosing a higher position, as it will be easier for the mother to position the baby. As soon as the child learns to stand, the bar should be lowered.
• As for the moving parts of the bed, insert it into the guide grooves of the two side elements.
• We turn the entire structure over for subsequent assembly and attachment of the swing mechanism.

Preparatory work

The design of children's beds varies. For example, pendulum-type options are somewhat different than transformer models, rocking chairs or furniture with hinges. The process of assembling purchased goods occurs in 2 stages. It includes the preparation of components and installation of elements.

In order to assemble the bed in comfortable conditions and with high quality, you need to do the following:

remove unnecessary children's items; move excess furniture, thereby freeing up space that is important for ease of installation.

It is important to carefully check all metal and wooden components included in the kit. Their number must correspond to the information indicated in the instructions

If you find a missing item, you must immediately call the store.

It is also worth making sure that there are no flaws in the wooden surface. To do this, all pieces of furniture are carefully checked for integrity. If chips or old cracks are found, the product must be returned, since the damage threatens the safety of the baby.

Then you should sort all the parts. Walls, side parts and other elements must be assembled below on the floor into separate groups, taking into account shape and size. If there is no bed assembly diagram, then you need to find it in available sources of information. Following the assembly algorithm will help to avoid problems, especially for those people who are faced with such work for the first time.

What it is?

A crib with a pendulum is a piece of furniture that is made of wood and equipped with a swinging mechanism - a pendulum. If the baby has not yet been born, it is difficult to determine whether this model should be preferred. Medical experts disagree, so making a final choice is not easy.

Transformable bed with pendulum and drawers:

The principle of operation of the pendulum mechanism is simple: the rocking chair is set in motion by touching the body with your hand. The baby, moving in the crib, is also able to launch it himself. The main requirements are that it should not stand close to the wall with its moving sides and should be equipped with a lock:

Several popular models

Currently, there is a huge range of cradles on the market; the cradles presented below are especially popular.

Simplicity 3014 lol

Modern transformer model. The cradle can be converted into a cradle-basket, a crib or a wicker table. This model has a pendant with toys and music. Automatically controlled. Also included is a mattress.

Pali series Baby Baby

Wicker cradle made of willow twig. All textile parts are made of natural cotton. If necessary, it can be transformed into a cradle bed. There is no rocking mechanism, but there are wheels that allow you to roll or rock the little one. There is a wheel lock. Includes: blanket, mattress, bed linen, pillow.

Combi Fealetto Auto Swing

Expensive, but multifunctional model of an electronic cradle. It has several motion sickness modes and soothing music. Converts into a baby feeding table and includes a mattress.

Chicco Next2me

Lightweight multifunctional rocking chair. Made of plastic. All fabric elements are easy to remove and clean. The bottom is height adjustable and has a mosquito net.

Zibos Ala

Similar to the previous model. Has fixed wheels and bottom adjustment. There is a fastening system. You can purchase a transformation mechanism and convert it into a rocking chair. The main feature of this model is that it can withstand up to 150 kg.

How to assemble a crib with a pendulum

You can assemble a baby crib at home yourself; you don’t have to call a specialist for some money. In this case, you should follow a few simple rules and prepare wisely. To quickly and correctly assemble the crib, you need to prepare.

Assembling the crib should be done in the child's room. Otherwise, you will have to carry it across the entire apartment, which is very inconvenient.

Before assembly, it is necessary to prepare a place for work, that is, to free up space. Then you should release the parts from the packaging, lay them out and count them. In this case, large parts must be put aside in one direction, and small ones in the other.

In order not to move the assembled bed to another room later, it is better to start assembly immediately in the nursery.

For small details, it is better to prepare a light fabric: a blanket or a blanket. This way they will be better visible and will not get lost.

Drawing and instructions

After the crib is unpacked, you need to carefully read the instructions for assembling the transforming crib with a pendulum. Unfortunately, for products sold in online stores, instructions are not always provided in Russian. In this case, you have to act based on the scheme and intuition.

Be sure to read the instructions that come with the crib. If there are instructions, you must read them. If the instructions for assembling a transforming bed contain photographs, it is better to carefully examine them, no matter how simple they may seem. This will help with assembly later.

If the instructions are illustrated with photos, be sure to study them. Place the drawing in a convenient, visible place. A good place might be where small parts are kept.

Main design details

The crib usually consists of a frame, a bed, a swing mechanism and other elements. The side walls and bed are the largest elements that ensure the reliability of the entire structure and the baby’s stay in the crib.

All cribs consist of a main frame, a pendulum and additional elements. The pendulum mechanism can be designed in different versions:

• Longitudinal. The simplest, most popular option. At the same time, it best imitates natural motion sickness. Medical studies have shown that this particular option helps normalize intracranial pressure.
• Transverse. The movement occurs from side to side. Assembly of this product is a little more complicated.
• Universal. The cradle is attached separately to the sides. Thanks to this, she also has natural motion sickness. Later, the cradle can be removed and the baby can be placed on a bed that lowers down.

The pendulum mechanism for the crib can be longitudinal, transverse and universal. Depending on the type of rocking mechanism, cribs are assembled differently. But the basic principle is the same: first, the main elements are assembled, and then the swing mechanism is attached.

First you need to collect all the main elements.

Necessary tools and components

It is also necessary to prepare the tools that will be required for assembly. The usual set for this is:

1. Screwdrivers of different sizes and sections.
2. Wrenches for nuts of different sizes.
3. Screw keys, they are usually included in the kit.
4. Screws.
5. Plugs.
6. Main components.

To assemble the crib you will need a certain set of tools.

Bed assembly

Once everything is prepared, you can begin assembling the crib. It is important to start the process by assembling the main elements.

Assembly begins with connecting the main elements. It is necessary to determine the top and bottom of the main elements. It is worth considering that the side walls usually have legs - you can easily orient the parts along them.

Clearly determine where the top and bottom of the crib are. The main part will be the back wall - it is better to place it on the floor, with the inside facing up. You need to insert the remaining parts into the puzzles for fastenings and connect the crib body completely. After this, it is necessary to tighten all the screws, check the structure for stability and then install it vertically.

Once the crib is installed, you can begin installing the bed. First you need to try on how the bed will be installed. After this, you need to try on the moving elements. After this, once all the details of the fastenings have been checked and taken into account, the stock can be installed.

It is better not to install the stock right away, but to try on several options with moving elements. Then mistakes can be avoided.

After the bed is installed, you can turn the crib upside down and begin installing the pendulum mechanism if it is attached from below. If the swing mechanism is presented in the form of a cradle, then it is attached to the sides from above. Then there is no need to turn the crib over.

The pendulum mechanism itself is installed in accordance with the instructions. After installing the pendulum, drawers, a changing table and other additional elements should be secured.

All additional elements are fixed after assembling the pendulum.

The pendulum mechanism cannot be attached before the stock is installed.

Since the stock acts as the main element of the structure and ensures its stability. Otherwise, the frame of the crib will begin to wobble, which will make it inconvenient to place such a large element into it.

After installing the last parts, be sure to check the structure for strength. After the device is assembled, you need to check its reliability. To do this, you need to set the crib in different modes, try to rock it and put a little pressure on it. If everything is in order, then you can lay out the mattress, linen and settle the baby.

You can place your baby in the crib only after you have made sure that everything is assembled correctly.

What do you need?

How to assemble a transforming crib? Some people prefer to turn to specialists. Indeed, a master will be able to do this much better, since this work is quite labor-intensive.

After purchasing a rectangular or round transformable crib, you must read the instructions. It is there that there is a detailed description that allows you to understand the nuances of the work. You will also need a screwdriver and the desire to perform the procedure.

Photo of a round transformable crib 8 in 1

Photos with sides and canopy

Photo with a child

Types and advantages of pendulums

There are several types of beds for children, they differ in the direction of movement of the furniture itself. For worried parents, it is worth noting that thanks to a special wooden mechanism on a hinge and a limiting sleeve - a special spare part - motion sickness will not occur, nothing will disturb the baby's sleep. Three options: with a longitudinal pendulum, with a transverse pendulum and a universal bed.

The first option is considered the most common and popular, because only thanks to the longitudinal pendulum is the natural swing of the mother transmitted. The child has the feeling that he is being calmed by his own mother, holding him in her arms. According to pediatricians, thanks to this, the child is guaranteed to have normal intracranial pressure, and therefore no headaches in the future.

Models with a transverse pendulum are reminiscent of the cradles in which our ancestors rocked their children. Like the old version, modern cribs move from side to side. This type of furniture is perfect for families with a small bedroom due to the fact that, thanks to the transverse pendulum, the furniture takes up little space. Special clamps will help stop the movement of the crib.

Universal models not only allow you to change the swing direction, but can also change their functionality. When the child grows up, the wooden walls can be removed and the bed itself can be lengthened using a chest of drawers. Sometimes manufacturers include a changing table, which is incredibly convenient for mothers. And while the child is still in infancy, parents do not need to put in much effort to return the crib to the standard position or change the direction of rocking.

Features of the assembly of the pendulum mechanism

The main difference between a pendulum crib and others is that you can rock a baby to sleep in it. The structure swings with one push and lulls the child to sleep. This will come in handy at the very beginning of the baby’s life and will free parents from having to rock him in their arms every time.

Bottom installation

When installing the support part, adjust its height correctly. For an infant, the mattress should be placed higher to make it easier to put him to sleep. As the child ages, the mattress must be lowered.

Collecting the box

Assemble the hinges and attach them with nuts to the base of the pendulum. If the model has drawers, they need to be installed and attached as written in the instructions.

Placing a box in a pendulum

The body is placed on the base of the mechanism. We fix it on the legs of the structure, insert the nuts. We attach the sidewall. We install bearings. Cover the screws with plugs.

Where can I put the bed

Usually the crib is installed first in the parent's bedroom. This makes it more convenient to sleep and look after the baby. In this case, it is important to position the crib so that its long side is next to the wall, and one side remains open. This will allow you to approach the child from the most comfortable side.

It is important to place the side wall at the head of the room against the wall, curtains or closet. This way there will be no access to the child from this side, thanks to this he will feel safe and will not roll his eyes to see the space behind him.

While the child is small, the crib is often placed in the parent's bedroom and one side is left open. As the child grows, the crib can be moved to his or her nursery. This will make moving to another space more comfortable for the baby. After all, his cozy house will remain with him.

Tips for the master

• The description of how to assemble a pendulum crib, instructions and photos may vary depending on the model of purchase. Carefully read the manufacturer's instructions included in the package.
• It is better to assemble the crib in the bedroom or nursery and not move it to other parts of the apartment.
• Keep the crib clean: remove dust and dirt regularly using water and a mild hypoallergenic detergent, laundry soap is suitable.
• If you find parts missing, consider ordering additional parts from the furniture manufacturer's website.
• It is better to assemble the crib the day before the baby arrives at home. Make sure that everything is ready for the arrival of the little man.

It is necessary to choose the right mattress for a crib

You need to choose a place for a baby cot

The crib must match the interior of the nursery

A pendulum crib, carefully assembled for the long-awaited baby with your own hands, tested for safety and reliability, will be an excellent place for your baby to relax and develop. In a nursery or bedroom it will become the center of attraction for parents and guests. In order for the crib to be a cozy nest and interior decoration, it is not necessary to call a professional furniture assembler. Thanks to the description of how to assemble a pendulum crib (instructions, photos), you yourself can easily achieve your intended goal.

Baby cot-cradle with pendulum mechanism of transverse swing

Wooden crib with pendulum mechanism

Warnings

• Check the condition of the crib every week for damage, such as loose bolts, that could harm your baby. You can also check if the wheels on the crib are ok.
• Always follow the manufacturer's instructions. This is the best way to ensure your child's safety.
• Check the FDA website regularly to make sure your crib meets safety standards. Many types of cribs pose a risk to children.

Sometimes there are situations when it becomes difficult to assemble a crib for a child, and nothing in the instructions is clear. Therefore, you have to look for help on the Internet.

General rules for choosing cribs

For many mothers and fathers, the decisive factor when buying children's furniture is visual appeal, however, this approach is fundamentally wrong. The main selection criteria are the convenience and safety of the little man. There are many things to consider when choosing a crib, including:

• material of manufacture;
• baby protection elements;
• features of the sleeping place arrangement.

Shapes, materials and sizes of frames

One of the main structural elements of a crib is the frame. Today, furniture manufacturers offer a huge selection of cribs for newborns; the range includes traditional rectangular models and somewhat non-standard products with a round or oval frame.

The strength and durability of a crib directly depends on the material used. In the production of furniture for small children, natural wood, MDF, plastic, laminated chipboard, and metal are used.

Of course, for a baby it is better to choose a crib made of natural material. Furniture with a wooden frame looks expensive and presentable, is characterized by a long service life and the ability to “breathe”. In the segment of wooden children's furniture today you can find quite affordable models; budget options include products made from pine, spruce and birch. More durable, expensive cribs are made from hard trees - beech, ash, oak. Wooden cribs vary in style and design. The market offers classic models made from unpainted wood and wooden cribs coated with paint and varnish, decorated with printed images.

Plastic frames are easy to maintain; the weight of a plastic crib is much less than its wooden counterpart. The affordable cost of plastic furniture also attracts buyers.

Metal frames are famous for their strength and long service life. However, metal cribs are not widely used due to the “coldness” of the material.

Sides - types and rules of choice

Another important element is the sides of the crib; the main purpose of the design is to protect the baby from falling. The sides can be:

• stationary and removable;
• blind rack or combined (two solid sidewalls, two rack).

Most often, furniture manufacturers make the side walls of the sleeping bed in the form of a lattice structure; the side walls consist of a frame and cross bars installed at a certain distance. The crossbars can be made in the form of a round rod or be represented by wide slats.

When choosing a sleeping place for a baby, it is important to take into account two main requirements for enclosing structures:

• the distance between the vertical slats of the side parts should not exceed 5-6 cm;
• The height of the sides should be at least 60-65 cm, measurements are taken from the mattress to the edge of the side.

Additional protection for the baby will be provided by special silicone pads on the edges of the side and soft removable sides fixed around the perimeter of the crib. Elements of protection are especially relevant when the baby begins to actively move and during the period of teething. Silicone pads will not only protect the child’s gums from damage, but also maintain the integrity of the tree.

Some models of cribs are equipped with a front folding side. The folding sidewall allows you to move the child's bed close to the parent's bed; when the child grows up, he will be able to independently climb into his sleeping place. Unlike cribs equipped with runners to adjust the height of the side, folding designs use piano hinges. If necessary, the side can be folded down to the outer side and, when raised, is secured with latches.

Sleeping place - types and arrangement of bases

The base for the mattress of a baby crib can have a solid covered or slatted bottom. A solid bottom is considered more durable, and the cost of cribs with a solid base is lower than their slatted counterparts. A significant drawback lies in the design features; the solid base does not have gaps or holes, and therefore there is no air circulation between the mattress and the bottom. The mattress does not dry well and can quickly become unusable.

The slatted bottom consists of transverse strips fixed to the frame. The lattice design does not retain moisture inside the mattress and provides intense air circulation. The slatted base helps to properly distribute the load on the baby’s fragile spine.

How to make a pendulum for a crib with your own hands?

Let's figure out how to make a pendulum for a crib with your own hands. For these purposes you will need:

Installation diagram of the pendulum mechanism.

• bearings, the outer diametrical size of which corresponds to 3.5 cm. The required quantity is 8 pieces;
• metal bushings with 6 threads. You will also need 8 of them. You can buy these at any market that specializes in selling furniture fittings;
• countersunk head screws. With their help the pendulum will be attached. Need 8 pieces;
• strips - 4 pieces. Elements of parquet made of oak (planks) are suitable;
• washers in the amount of 8 pieces. The most appropriate choice would be to use plastic copies. They will be needed in order to avoid friction of the bed legs when in contact with the supporting structure;
• In addition to purchased ready-made materials, you will need metal bushings (8 pieces), which should be pressed quite tightly into the bearings, or rather into their inner hole. Such bushings are made only to order.

( 1 rating, average 4 out of 5 )

Ways to save space when placing beds

When living conditions are cramped due to the size of the living space, a variety of designs come to the rescue, making it possible to unload the space as much as possible.

Built-in bed

If there is a shortage of free space, two-tier systems can be a great help for a family with children. In some cases, it is appropriate to install beds that slide into podiums.

Podium bed

Folding structures are very functional.

The most common models of transforming beds:

• sofa beds;
• tables-beds;
• beds built into wardrobes.

Furniture manufacturers offer many interesting and functional solutions. In one-room apartments, it is often simply impossible to do without installing a sleeping place that can be stored in a closet.

Bed built into wardrobe