How to repair a computer chair with your own hands

Repair of chairs from 1000 rubles!

The master will arrive within 1 hour or a convenient time!

Call a specialist now!

and get a 10% discount on subsequent work!

in Moscow provides a repair service for office and computer chairs from Russian and foreign manufacturers made from various materials and with different mechanisms. The company’s specialists are provided with consumables and professional tools; repair work is carried out efficiently and on time.

The chair is a comfortable chair with armrests, used in everyday life, public institutions, and enterprises. With active use, the upholstery of the seats loses its presentable appearance, and the structural elements fail.

Office chair repair

The company's employees repair office chairs of any purpose and model:

• for management staff;
• for staff;
• for visitors;
• monolithic;
• prefabricated;
• on legs;
• with runners;
• with mesh upholstery;
• with classic upholstery.

Our technicians will check the condition of the office chairs, adjust unbalanced mechanisms, and identify and eliminate breakdowns. A timely repaired office chair means comfort for staff and managers, which has a positive effect on the quality of work.

Repair of office chairs in Moscow

provides repair services for office chairs with various designs of gas lift, swing mechanism and other functional elements:

• spring-screw (back adjustment);
• piastra (seat adjustment);
• permanent contact (back adjustment);
• TILT (swing mechanism);
• Anyfix (swing mechanism);
• top gun (swing mechanism);
• gas cartridge, or gas lift short, medium and long.

The company's employees will adjust, repair or completely replace failed office chair mechanisms.

Repair of office chairs and armchairs

In the process of repairing office chairs and armchairs, our specialists eliminate the following defects:

• wear of rollers (wheels);
• breakage of the crosspiece;
• breakdown of the top gun swing mechanism;
• breakdown of the gas lift that regulates the height of the chair;
• sagging of the seat in soft chairs;
• upholstery wear.

How to take measurements and how much fabric to buy?

We have already figured out the correct type and quality of fabric. The amount of fabric can be measured in several ways.

• Take measurements from the back and seat. If you plan to add additional foam, you should take this point into account when taking measurements. To the data obtained (length and width of the back and chair) you need to add 5 cm.

  
  The fabric will be attached from the inside, this requires allowances.

• You can first disassemble the chair and remove the old covering.

  
  This can be difficult since the upholstery is tightly stapled to the frame pieces.

  Then you should measure the finished darts, adding allowances for using foam rubber.

Executive chair repair

We provide repair services for executive chairs of all existing models. Our specialists repair all types of rocking mechanisms that are used in luxury office chairs:

• multiblock;
• multiblock with axis offset;
• synchronization mechanism;
• sipro mechanism;
• asynchronous;
• anti-shock effect.

Chair repair prices

We keep the cost of repairing all types of chairs at an affordable level. The minimum repair price is 1,000 rubles, but the final price depends on the model of the chair, the extent of the breakdown, and the urgency of the work.

You can leave a request for the repair of office and computer chairs of any model in Moscow by calling the number. Cooperation with guarantees you professionally performed work at affordable prices.

Product disassembly stages

If a computer chair breaks, the first thing you need to do is disassemble the structure. To do this, you will need a rubber hammer, slotted and Phillips screwdrivers, and a hammer drill. All actions are performed in stages:

1. The first step is to remove the seat, turn the chair upside down, and pull out the fasteners.
2. We unscrew the bolts securing the armrests and remove these parts along with the plates.
3. Disconnect the clips that hold the permanent contact.
4. The crosshead is separated from the air chuck by lightly tapping the connection with a hammer.
5. The wheels are removed from the mounting grooves, the caps located in the steel casing are removed. The procedure is performed using a flat blade screwdriver.

Stages of making a manger with your own hands, finishing

It is recommended to carry out all manipulations with the mechanisms that hold the structure suspended, so as not to break the fragile plastic parts. For the same reason, you should not apply physical stress when unscrewing the fasteners. Having completed disassembling the computer chair, you need to collect all the parts in one place so as not to lose anything.

Our best masters

32

work for the last month

16 years

years of experience

Semenov Andrey Valentinovich

28

work for the last month

26 years

years of experience

Brezhnev Sergei Semenovich

36

work for the last month

27 years

years of experience

Ozerny Vladimir Viktorovich

All masters

Precautionary measures

Repairing the product must be as careful as possible, because some expensive parts are protected by a thick layer of lubricant. Replacing the crosspiece on an office chair while observing safety precautions will help the technician significantly reduce repair time. Basic recommendations:

1. It is worth putting on fabric gloves with rubber coating on your hands and a protective mask on your face.
2. The surface of the floor or table where repairs will be carried out must be covered with old newspaper or oilcloth.
3. It is important to fix broken furniture firmly so that it does not wobble during repairs. A child or a fragile girl can even become an assistant.
4. Knock out the steel bearing as carefully as possible so as not to damage its complex structure.
5. It is safer to remove the crosspiece from the chair using a rubber or wooden hammer. The vapors of the penetrating liquid are quite dangerous to human health. If it is used, the room must be ventilated for 20-30 minutes.

Sudden inaccurate actions can damage not only the cartridge, but also the mechanism for raising and lowering the chair!

In order for the chair to last as long as possible after changing parts, it must be looked after regularly. It is important to check the tightness of connections every six months, inspect bolts and nuts. It is imperative to take into account the maximum load of the furniture, and do not sit on it suddenly to avoid breaking its elements.

When purchasing a chair, experts recommend initially choosing options with a wooden or chrome cross.

To summarize, we can say that removing the cross from a computer office chair is quite simple. To carry out the work, you only need a skilled man and simple available tools. Self-repair will not take much time, but will help extend the life of the product and avoid large expenses on new furniture.

Customer Reviews

Basil

5

Thank you for your prompt work! With electricity, everything is more or less normal now.) If anything happens, we’ll come to you right away! 01/29/2022

Master: Vereshchuk Vyacheslav Dmitrievich

Marina

5

Timely, expert assistance, there’s no other way to describe it! Denis very inexpensively installed a new hob instead of the old one. Just great! 01/18/2022

Master: Mitinkov Denis Eduardovich

Ilya

5

For the money, the service is simply superb. The master arrived exactly on time, without delay. I replaced all the batteries in the apartment quickly and efficiently. The housing was not damaged, plus they provided a guarantee. What more could you want? 5+ 01/10/2022

Master: Zhemirya Evgeniy Vladimirovich

All reviews

Necessary materials

To work, we first need fabric.

The best option is thick upholstery.

What materials should you not buy? There are few exceptions.

1. Faux leather.

The canvas will quickly become scuffed and lose its original appearance due to constant friction.

1. Thin, lightweight fabric.

Such material is susceptible to damage from sharp objects, including pointed elements on clothing.

If the seat has lost its former softness, and the foam lining is very wrinkled, then you need to buy foam rubber, it will make the chair more pleasant and comfortable.

It is easy to find in sewing stores.

Why do you need a reupholstery?

Over the years, any piece of furniture in your interior becomes outdated, becomes unusable, the drapery wears out, becomes stained, and wears out. Over time, outdated furniture becomes uncomfortable to use; among other things, it no longer fits into the interior and even distorts the overall picture of the room. This means that the time has come to either replace and dispose of old furniture, or try to restore and reupholster it.

Restoring furniture yourself has its advantages.

Reupholstery is possible when the chair is still:

• Durable;
• Reliable;
• Has a strong base.

Upholstery will give a second life to an outdated chair, returning and even improving its former appearance. The updated chair will be able to serve for several more years as a reliable and tested piece of furniture.

Benefits of self-updating

Repairing furniture yourself is actually not as difficult as it seems. If you have sufficient skills, and they will be acquired, accumulated and improved with each step, even a beginner in this matter can update a chair at home. According to experts, the main thing here is to act carefully and not deviate from the plan - in this case, the end result will impress the household. In addition, reupholstering furniture yourself has an undeniable advantage - it will cost much less than turning to professionals or buying a new product. And if you show a little imagination and creativity and think in advance about how to update an old chair with your own hands, changing the design that has lost its trendiness or improving the shape, you can turn it into a completely new element of furniture.

Features of do-it-yourself banners

Anyone who decides to remake an old chair into a more modern one is completely free to choose materials and the style of the future design. Before starting work, you should decide in which room the product will be placed and who will use it. For the nursery, “cheerful” colors are selected, but non-staining, natural fabrics. The kitchen uses materials that do not absorb liquids and odors.

It is important that the updated item fits optimally into the existing interior. Depending on the design of the upholstered furniture and the accuracy of the craftsman, its repair will take from a couple of hours to several days