Good sleep is the key to health and good mood. To do this, it is important to properly organize your sleeping area. The health of the spine and the comfort of body position directly depend on the chosen mattress. Therefore, it is necessary to understand the nuances of choosing a product and understand what a spring block is.
The basis of most modern mattresses is a spring block
Mattress with independent spring block
Independent spring mattresses vary depending on the number of springs per square meter
A mattress equipped with independent spring blocks is a design with no interaction between the springs. Each of them is in a special case. This allows you to create an orthopedic effect that affects every part of the body to the required extent.
Levels of anatomical effect using spring blocks as an example
Classification
Independent spring blocks come in different types and differ in cost. Usually the description of the mattress indicates the type of spring block that is inside. Each manufacturer may have its own designations for classes of spring blocks. Let's figure out what these strange markings mean.
- Pocket Spring (TFK, S-500) is the simplest and most common type of block. It has a spring 5-6 cm in diameter and there are 220-300 springs per square meter of the mattress. The maximum load per bed is 110-120 kg.
- Multipocket (S-1000) is a more advanced type of block, as it better follows the curves of the body. This is due to the fact that the spring density in it is higher. The diameter of the spring is about 4 cm, which allows you to fit up to 500 springs per 1 square meter. m. Its maximum load is also higher - up to 120-130 kg.
- Micropocket (S-2000) - has the smallest springs with a diameter of 2-2.6 cm and the highest density - up to 1200 pieces per 1 sq. m. This block can withstand 140-150 kg per bed. In addition, it perfectly follows the contours of the body, as it has high point elasticity.
- Hour Glass (“hourglass”) are springs that are one of the latest achievements in the field of orthopedic mattresses. They got their name because of their hourglass shape. This type of spring has three levels of stiffness at the same time and is suitable for partners with a significant difference in weight.
- Dual Spring (spring within a spring) – this type of spring is also suitable for partners with a large difference in weight. Their peculiarity is that in one block there are two springs at once - one inside the other. A spring with a larger diameter has a lower stiffness, and the second one, inside, has a higher one.
- Reinforced - this type of springs is made of thicker wire and is designed to withstand a weight of up to 150 kg per bed.
- With zones of rigidity - this term refers to mattresses that have spring blocks of different stiffnesses. This is done to provide more accurate support.
Now you can easily understand all the characteristics of spring blocks and choose a suitable orthopedic mattress.
Bonnell spring block - what is it?
In dependent spring blocks, all springs have a bicone shape and are connected by continuous weaving
A reinforced version of the classic Bonnel spring block, in which the entire mattress area is reinforced with blocks of high-density polyurethane foam
This spring block is in demand. He is a "dependent" species. Because the internal structural elements are interconnected. As a result, each spring depends on the others. A special method is used to fasten them.
The bonnel spring block consists of 5-turn springs made of steel wire
The radius is constantly decreasing and increasing. Toward the center of the product, the spring block and its parts narrow, and begin to expand at the edges. Thanks to this system, the load is distributed evenly and maintains optimal body position.
Mattresses based on a Bonnel spring block have a long service life, are well ventilated and dry quickly when wet
The springs are made of high quality steel. To connect them, special frames or wire with knots are used. Unwinding is avoided by special locks on the structure. Weaving can be with five or four turns. In the first case, the mattress is higher and costs more.
All springs in the mattress at the top and bottom are connected to each other by a steel spiral and limited by a metal frame
Summing up
- If we are talking about buying a mattress for daily use, preference should definitely be given to mattresses based on an independent block (and not BONNEL).
- The greater the number of elements per 1 m², the higher the orthopedic, more accurate support and distribution of body weight. Multi-zone options are very good.
- The high cost is justified. It is compensated by a long service life, proper rest, ensuring stable functioning of internal organs, and maintaining the spine in a healthy condition.
- In order not to be disappointed and not to pay twice, it is better to purchase from a manufacturer with a good reputation. A product purchased from an unknown company may present a number of unpleasant surprises (chemical smell, violation of production technologies, non-compliance with the stated parameters, etc.).
- The selection of a mattress should be carried out carefully, taking into account the weight, age, needs, and health status of a particular person.
The selection of a mattress should be done carefully, then you will definitely purchase a quality product.
Spring mattress blocks: types
Orthopedic spring mattresses of different types
Spring blocks can work in compression or tension. The first type is often used in the manufacture of standard mattresses. Among the types of blocks, the main ones are:
- dependent;
- acting autonomously or independently.
It has already been noted that in the first case, each internal part depends on the others and is connected to them. In another form, each element acts independently and does not interact with the others.
The difference in using a spring block with independent and dependent springs
Experts consider this option more suitable for healthy sleep, but it is more expensive. A mattress with a dependent spring block is cheaper. You can choose a quality option for a good rest.
Difference between independent and dependent spring unit. Why are we overpaying?
The spring block can be with an independent or dependent system. It is worth understanding the main differences between the types. This will allow you to make the right choice when buying a mattress. To find out the differences, you need to clarify the main characteristics:
- Block with dependent springs. They intertwine with each other, forming a single mechanism. The mattress consists of steel wire parts. Models are divided according to the density of the springs and their diameter. The lower the last indicator and the higher the density, the better the body will be supported during sleep. The advantages of the system are accessibility, due to low cost, and the ability to withstand heavy loads. Over time, the spring block may become deformed and the product will begin to sag. The person sleeping next to him feels all the movements of the other person during sleep.
- Independent block. The springs act independently, regardless of each other. The characteristics of the springs directly affect the stiffness of the product and its density. This allows him to become an orthopedic. Thanks to independence, each spring compresses without affecting the others. The load is distributed evenly, the mattress follows the contours of the body. If one of the springs fails, this will not affect the entire product. One of the key disadvantages of an independent type spring block is its high cost.
"TFK" (TFK) - a classic spring block with the number of springs about 250 springs / sq.m.
“Multipocket” - about 500 square meters/sq.m with the number of turns usually 8-10 with a spring height of about 13-14 cm, more “anatomical” compared to “TFC”
“Micropacket” (Micropocket) - about 1000 p/sq.m, with the number of turns usually 12-14 with a spring height of about 13-14 cm, significantly more expensive than the previous 2
An independent system does not help heal a bad back. But it will be an excellent preventive measure for maintaining health. If a mattress is purchased for a place of relaxation and not sleep, then you should not overpay and just choose a dependent system. In other cases, it is better to choose a block with independent springs.
Advantages
An independent spring unit is more expensive, but it has a number of advantages:
Durability. This mattress will last you much longer than one with dependent springs. On average, the service life of mattresses with independent spring blocks is 7-10 years, and for dependent ones no more than 5-7 years. In addition, the latter quickly begin to lose their properties and sag. After just a couple of months, you may notice that the mattress has indentations in places of greatest pressure.
Safety. Due to the fact that each spring is placed in its own separate case, if it breaks, it will not be able to pierce the mattress and injure the person sleeping on it. The cover will serve as additional protection. If the spring in the dependent block bursts, it can pierce the thin layer of the upper filler and the cover.
High loads. Independent spring units can withstand higher loads than dependent ones. They can easily cope with a person’s weight of more than 100 kg and at the same time do not sag or deform anywhere. There are special reinforced models that can withstand up to 200 kg per bed.
Low motion transmission. When you roll over in your sleep or get out of bed at night, the mattress can create vibrations and wake your spouse. This problem is usually inherent in mattresses with dependent springs, since all the springs are interconnected. In mattresses with an independent block, this vibration effect is minimal or completely absent.
Versatility. If you and your spouse have a big difference in weight, then you can choose a mattress option that will suit both of you. This can be a mattress with two zones of rigidity or with special spring blocks that support different weights equally well.
No squeaking. Since each spring is placed in a separate case and completely isolated from its neighbors, there is no friction or squeaking. This drawback is often found in mattresses with dependent springs, since some parts are in contact with each other.
Packaging of independent springs, type of material and method of fastening
The most vulnerable part of the product is the upper shell of the material. It is regularly exposed to springs. Therefore, weak fabric can easily be damaged. You should pay special attention to the material. The service life of the mattress depends on this. The packaging of the spring block with an independent system is also important. Spunbond and fibertek are used. The latter is more durable.
The durable fabric upper shell of the independent spring unit significantly increases the service life of the unit
When manufacturing the product, the non-woven part is welded using ultrasound. The close location of the gluing points to the middle of the pocket allows the springs to work more independently, enhancing the orthopedic properties. Also, a special glue is used for connection, which leads to the appearance of a specific odor. Over time it disappears.
Tips for choosing a mattress
The mattress should be neither too soft nor too hard, but exactly as required by the client’s weight, dimensions and personal preferences
To make an informed choice, you should rely on the following characteristics.
- Size. If you already have a bed, you should measure it and choose a suitable mattress option. In other cases, you must first determine the dimensions of the bed.
Before purchasing a mattress, you need to take basic measurements of the bed. - Weight. It is necessary to correctly correlate the rigidity of the model and the heaviness of the sleeper. The more the sleeper weighs, the firmer the mattress should be purchased.
When choosing the firmness of a mattress, you need to take into account individual characteristics - Block type. The main characteristics of a dependent and independent system have already been noted.
- Manufacturer. You should only contact trusted companies that have proven themselves on the positive side.
Sleep comfort depends on the choice of mattress and its components. Therefore, you should take your choice seriously. This will keep your back healthy and ensure sound sleep.
