How to make a throne from a chair - detailed instructions and selection of materials

Historical reference

The chair as a piece of furniture appeared many centuries ago. At that time, the throne and the chair were essentially the same thing. It is believed that the first throne chairs were used by the Egyptian pharaohs. Such furniture was found in their tombs. At first these were thrones made of wood; they could hardly be called very comfortable.

Gradually, the fashion for thrones captured almost all countries. But initially such furniture could only be found in the homes of rulers; later, majestic chairs in the form of thrones began to appear in the homes of wealthy subjects. Upholstering thrones with fabrics was first invented in France. Royal seats were upholstered in silk, velvet, and tapestry. They also came up with the idea of making soft down pillows for the thrones for greater comfort. Later, the backs and armrests began to be turned into real objects of applied art: craftsmen carved elegant patterns on them.

The 20th century was famous for its practicality, so elaborate thrones disappeared into oblivion at that time. However, nowadays they are back in fashion.

An uncomfortable carriage, a heavy crown, an old chair: what do you remember about the coronation of Elizabeth II?

Coronation is not just a bright event, but a historically important event that happens so rarely that the public eagerly awaits the moment when they can see the ceremony at least with one eye. The last time a coronation took place in Great Britain was 70 years ago, when Elizabeth II ascended the throne. The event took place on June 2, 1953, and the then princess was 27 years old. The Queen inherited the throne from her father, King George VI. The coronation ceremony was memorable, but some facts continue to amaze the public today.

Elizabeth II and Prince Philip, 1953

Princess Elizabeth was away in Britain when she learned she would become queen

Elizabeth II, 1953

When King George VI died, his daughter Elizabeth was in Kenya. She learned that her beloved father had passed away as a result of coronary thrombosis, and cut short her trip to reunite with her family. The news that Elizabeth had become monarch came to the princess while she was away from her homeland, which turned out to be a historical moment. Nothing like this had ever happened before this episode.

The coronation chair was over 650 years old

Historical events are impossible without special paraphernalia, and such is the piece of furniture on which Elizabeth II sat at the time of her coronation. The chair, made for Edward I in 1300, has seen a lot in its time and has become one of the main attributes used to convey the coronation of a royal person.

Elizabeth II, 1953

Her Majesty's crown turned out to be very heavy

It is unlikely that anyone will be surprised to learn that coronation is an event that is not complete without the glitter of precious jewelry. But few people know that the crown of St. Edward, which had to be placed on the head of Elizabeth II, weighed almost 2 kilograms. Pure gold and sparkling precious stones weighed down this luxury item so much that Her Majesty only dreamed of quickly taking off the royal attribute. However, the beauty of the crown, created back in 1661, amazes even today with the brilliance of rubies, diamonds, pearls, sapphires and emeralds.

Elizabeth II, 1953

Before the coronation, the anointing oil was destroyed by a bomb

Among the most important attributes, special anointing oil is of great importance for the ceremony. The fragrant substance, consisting of roses, oranges, cinnamon, amber and musk, was destroyed by a bomb in 1941, so it had to be prepared anew specifically for the coronation of Elizabeth II.

Styles

The unusual shape of such chairs can harmoniously fit into the following styles:

Palace ones. Mostly it is Baroque or Rococo. There are a lot of decorations and whimsical forms are almost the norm. Symmetry and pairing are not required.
Classic. Paired models with a low back are perfect. It can be medium in size. Some restraint in decor and colors will be required. It is better to avoid choosing angular models.
East. Chairs with hoods are ideal. Especially if the covering is made of silk, and the ornament is appropriate.
Colonial. The main emphasis is on natural wood and luxurious upholstery. Average amount of decorations. But the furniture is very heavy and massive. Favorite colors are red and the whole range of mahogany.
Neoclassicism. Symmetry, antique airiness and lightness are held in high esteem. Irregular shapes and excessively bright colors are taboo. The main motto is that luxury should be elegant.
Gothic. Thrones that resemble chairs would fit here just perfectly. Only real wood with a minimum of upholstery. It’s simply great if the decorations on the throne or its back are made with arched motifs. But Gothic doesn’t like gilding carvings. Instead of gilding, it is better to paint the carved elements with a colorless but shiny varnish.

Give yourself confidence in your own abilities by installing a chic throne chair in your living room. At a minimum, in your own home you will become a real monarch and master to the fullest. However, it is not necessary to wear a crown.

Model selection

Furniture products made of wood differ in design solutions, design style, the presence of additional elements and functionality.

Products are divided into models:

with frame and solid elements;
with fabric upholstery and filling.

Models with a rigid structure are durable, reliable, and optimal for everyday use. Wood products of various configurations are placed in guest rooms, bedrooms, and work rooms. A handmade antique chair will highlight the interior. The armrests and backrest can be decorated with gilding, carving, aging and decoupage techniques.

Wooden upholstered chairs are comfortable and aesthetically pleasing, but require regular maintenance. Products are placed in recreation areas, dining rooms, and children's areas. The models are equipped with a durable frame; the upholstery can hide the product completely or individual elements (armrests, backrest, seat). For teenagers, it is optimal to make the back and armrests hard, leaving the seat soft. The height of the filler varies; for soft flooring it is necessary up to 3-5 cm, for medium density – 2-4 cm.

According to their design, the chairs are divided into:

folding;
sliding;
Kentucky;
with a high back;
rocking chairs, etc.

Folding structures are ergonomic, easy to move, and multifunctional. The products are equipped with a folding system, metal brackets, and springs. Furniture can be easily transported to a country house or to outdoor events.

The configuration of the Kentucky chair is original and easy to manufacture. The product is made of durable wood and metal brackets and does not have fabric inserts. The lightweight design is optimal for installation under trees in the country.

Sliding models are multifunctional, ergonomic, and suitable for compact spaces. If necessary, the product becomes a place to relax. The models are complemented by upholstery and a small layer of filler.

Designs with high back support are made solid or padded. A throne chair made of wood looks harmonious in classical and Gothic interiors, Rococo and Baroque styles.

Interesting facts about the 7 legendary chairs

________________________________________________________________________________________

The first office chairs appeared during the research activities of Charles Darwin. To make it easier to move around the laboratory, the scientist came up with the idea of screwing wheels to the legs of his own chair. However, chairs on wheels reached their peak of popularity thanks to Otto von Bismarck, it was he who proposed the use of such furniture in Parliament.

Since ancient times, the improvement of chairs has not stopped. The desire to improve such a piece of furniture as a chair is associated with the realization that comfort and convenience contribute to productive work. Although not everyone adheres to this statement. So in Krakow, on the contrary, they make uncomfortable chairs, since there is an opinion that sitting on a hard, uncomfortable chair does not encourage sleep or the desire to rest. Accordingly, such unique chairs contribute to faster work and faster decision-making.

Unusual wooden chairs

Photo selection of unusual chairs made of wood by different craftsmen. The collection is replenished.

Garden throne

This chair with such an unusual canopy was made by furniture maker from Great Britain Ian Winton .

Rocking chair with striped seat

Materials: walnut, oak, pine, oil

Fabulous armchairs

Beautiful carved chairs with animal figures, similar to fairy-tale thrones, are made in the family workshop Free Range Designs .

What are bungee chairs

The bungee chair is an unusual modern piece of furniture. Everyone has heard at least once about the extreme attraction of bungee jumping. However, what does such a piece of furniture as an armchair or chair have in common with them? In fact, everything is extremely simple. The seat and back of such a chair are not solid, as in standard models, but are made by interweaving strong elastic cords. In appearance, it resembles a kind of hybrid of a hammock combined with the frame of a chair or a chair with a back, or their legs, in the absence of a back.

Types of bungee chairs

This piece of furniture is produced in several variations:

Children's look of small dimensions. They are characterized by a lower load capacity and bright colors.
Designed for the office. They are made in a strict design, have a back and armrests, and are equipped with wheels. In general, this option is a standard office chair, differing only in that elastic cords are used to create the back and seat.
Round shape. Most often they are used as simple garden swings, which are hung on tree branches. The cords are intertwined on such a chair from the center, which creates a “nest” effect. These swings are quite comfortable and interesting in their design.
Street view. Such pieces of furniture are placed, for example, in the patio area. The most important quality of such chairs is resistance to sunlight and moisture.
With folding mechanism. Bungee chairs, unlike traditional ones, have less weight, which makes them more convenient for transportation. And when the design also has a folding mechanism, then this will be the most suitable furniture option for a trip to nature.
In the form of soft hanging bungees. This type of bungee chairs is placed both indoors and outdoors. They are comfortable and relaxing to sit in.
The bar version, unlike other varieties, has high legs.

Where is a throne made from a chair useful?

This throne will be ideal for unusual photo shoots using appropriate royal accessories. It will also look beautiful at any festive event. You can make, for example, a throne for Father Frost or the Snow Queen. It should be decorated with snowflakes cut from thick white and blue cardboard, as well as using cotton wool and foam plastic.

The throne is indispensable for various theatrical events, holidays, masquerades, concerts and matinees in kindergarten. In general, it can be used at any cultural event.

ATTENTION! It is also often done to diversify the interior of an apartment. If the existing furnishings are quite boring, then you can refresh it by decorating ordinary furniture

Case for the throne of the King and Queen, material on design, manual labor on the topic

Sometimes moments happen when you want to somehow diversify your everyday reality.
Then various ideas for creating unusual things come to mind. One of these ideas was to create your own throne for the King or Queen. It can be used in the production of fairy tales, and a homemade throne is also perfect for holding unforgettable holidays in kindergarten. The throne should be bright, unusual and, of course, fabulous. If you make this work of art with your own hands, then the joy and impressions will be much greater than when purchasing a finished factory product.

Making a cover with your own hands is very difficult, so you should first cut the fabric into separate pieces. I used remnants of various fabrics, combining them in matching colors. To make the throne colorful, you need to cover all parts of the chair with fabric: the back, seat, legs. Making a unique product with your own hands is always pleasant and unforgettable. And creating a throne from a chair will not only be a source of pride, but also a practical piece of furniture for the room.

After we managed to make the cover, we proceed to decorating our throne. To do this, we make various decorations with our own hands. You can cut a wide strip from the same fabric that was used for the cover. From a strip of fabric we make a colorful voluminous bow, which is best attached to the lower back of the chair. To give the throne an expensive look, decorate the bow with a large rhinestone or jewelry stone. You can also place rhinestones in other places according to your taste and discretion.

Where is a throne made from a chair useful?

The throne is indispensable for various theatrical events, holidays, masquerades, concerts and matinees in kindergarten. In general, it can be used at any cultural event.

ATTENTION!

It is also often done to diversify the interior of an apartment. If the existing furnishings are quite boring, then you can refresh it by decorating ordinary furniture.

Cardboard box furniture

From one TV box you can make all the furniture in the house. To create it you will need:

The box itself.
Double sided tape.
Scissors.
Regular wide tape.
Glue gun or PVA glue.
Materials for decoration.

All furniture must be cut out, cut into the necessary parts and glued together.

Next begins the most interesting process - finishing. Cardboard can be painted, covered with wallpaper or paper . to the front of a cabinet or dressing table, imitating a mirror. You need to put a tablecloth on the table, and pillows on the sofa - this will add coziness.

Throne chair as an element of a beauty salon

The use of thrones in the interior of beauty salons is one of the latest fashion trends. In modern showrooms in America and Europe you can find such unusual furniture. It emphasizes the high status of the establishment and gives customers the opportunity to feel like important and valuable guests.

Different types of throne chairs are produced specifically for salons. The most common option is a pedicure throne. During this procedure, any client wants to relax, feel as comfortable and cozy as possible. A soft throne with a high back will give you this feeling. The height of such thrones is designed specifically for pedicure procedures.

However, thrones can be used in other ways. They can be displayed in the lobby where clients wait in line or in the manicure room. In addition, you can order hairdressing chairs stylized as thrones. Of course, here you will have to give up the high back in order for the master to work comfortably, but you can preserve other elements of the throne - the overall design, decorative touches, upholstery, etc.

As you can see, the throne chair is an interesting solution for bold interior design. This solution is not suitable for everyone; a classic throne cannot fit into a small room. However, there is a way out for such rooms - frameless chairs in the form of thrones

In any case, this is a comfortable and beautiful piece of furniture that will attract everyone's attention.

https://youtube.com/watch?v=95sxsDOQNpY

An elegant backrest for a throne is very easy to make.

When I imagined this project in my head, the first thing I imagined was an elegant backrest that would complete the look of the throne. I wanted the back to not look bulky or too fussy. I planned for this stylish furniture to match the design of my daughter's room. I decided to make a regal piece that was slightly curved.

Smooth and fresh skin: dermaplaning, or why a woman needs to shave her face

Women's jeans: before you buy them, you need to pay attention to one detail

A Brazilian travels 36 km by bike every day to take his loved one home.

To make the back of the mermaid chair, I cut out a whole bunch of templates from old cardboard boxes and glued them onto the back until I had the look I was looking for. The template was used to create a frame from a sheet of plywood which was glued and screwed to the top back of the chair.

I used the same cardboard template to cut two pieces from plywood. They were attached to a wooden frame. My faithful assistants helped me with this - construction puzzles, which coped with the task perfectly. I practically didn't have to do anything.

Step-by-step instructions for manufacturing

The manufacture of the throne will depend on where it will be used. You can consider the manufacturing process of the most common product for New Year's celebrations. For decoration you will need white wallpaper, fabric or cardboard, a ruler, a regular pencil, scissors, glue, foil (metallic or blue), and tinsel. You can also add ready-made New Year's rain to the decorations. The work process itself will not take much time:

We take thick cardboard, measure the corners and cut them.
Next, we assemble the “pattern” of the product.
On the top side of the “pattern” we cut out the corners. The corners will resemble pointed ice floes, as in the fairy tale about the Snow Queen.
Additionally, you can cut out patterns inside the top of the “pattern”.
We glue all the pieces of cardboard together and put them on the chair.
Next, we decorate the back using white wallpaper, cutting out the patterns prepared in advance.
We glue the back of the product with tape to the chair.
We decorate the product with tinsel, rain or colored paper. Additionally, you can glue snowflakes or sparkles.

REFERENCE! Glitter paints or acrylics also work well to decorate the back of the throne.

You can also consider another decoration option, a more complex one. It will take about three days to make it, but the result itself will exceed all expectations if you do everything according to the instructions. In this example, we use a regular wooden chair without upholstery. Follow the following sequence of actions:

We sand the chair with medium-hard sandpaper.
Fill the holes from the screws if they are visible.
Prime the surface of the furniture. For simplicity, you can use a diluted solution of PVA glue.
When the solution has dried, cover the chair with dark brown enamel.
After the enamel has dried, rub it with wax.
Next, we cover the surface with two more layers of white enamel.
We decorate the chair using stencils. You can, for example, use roses or any other flowers. The paint color can also be chosen to suit every taste. Absolutely any color looks beautiful on a white background.
The final touch is to varnish the chair. Now it looks like a real throne.

We hope that this article will be useful for creating new interior solutions. After all, with the help of the simplest and most inexpensive materials and tools, you can revive any furniture. Even an ordinary chair can easily turn into a throne.

Subscribe to our Social networks

Step-by-step process for making a man-made throne

Preparing the seating area

Having chosen a suitable root, you will need to cut out a massive part with a chainsaw, making something like a chair. This cut must be made at an angle of 90 degrees or more, here everyone decides for himself how it will be more convenient for him to sit on his wooden throne.

Heat treatment of the root

Light the blowtorch, when it warms up and the flame begins to burn steadily, you can start firing.

Before starting work, make sure that there are no flammable objects around, and that your clothes are not soaked with gasoline or oil after using the saw! Follow safety precautions!

The surface of the future throne should be burned carefully; do not be afraid to burn some places; after brushing, the throne will only benefit from this due to the coloring. Point the flame at hard-to-reach places, where harmful insects most often hide.

Sanding the surface of a wooden throne

Fix the brush on the grinder and start processing. After removing the burnt layer of wood, the structure of the treated surface will have a pleasant specific shade.

Important to remember! When working with an angle grinder, you should protect yourself from flying bristles. They are especially dangerous to the eyes, so protect them with tight-fitting goggles. Wear long sleeves that are buttoned tightly.

Places that are difficult to reach with an angle grinder can be treated with a similar brush for a drill; it is not suitable for sanding large areas, but is perfect for hard-to-reach corners.

Shapes and sizes

When choosing dimensions, you should take into account that the throne chair can be made in various forms. The dimensions depend very much on this. Here are the most basic ones:

Soft. The back is high. The width can reach up to 140 cm. These are very large models with a backrest height of up to 2 meters. The seat depth is at least a meter, and often more than this.
There is a hood. A classic English variation called the gatekeeper's chair. The seat depth and width are about 80 cm, but the height starts from 160 cm.
In the form of a chair. With a base depth of 80 cm, the width ranges from 90 to 100 cm. The back is also very high and can reach 180 cm.
Low semicircular. Visually it resembles a shell, as it consists of several sections (up to 5). The width and height can vary from 80 to 90 cm, but the depth is insignificant - only 60 cm.
Low square. The back is average. The height of such a chair will not exceed a meter. The remaining parameters are basic (80 cm).

The husband made a small throne from the bark of a tree. My little son is delighted and is now playing Forest Kingdom

The rule has long been known that there is no better thing than what you can do with your own hands.

We invite you to create something with your own hands, for example, a throne made of tree bark, using an old piece of furniture, in a very original and simple way, taking as a basis the model of the throne from the series “Game of Thrones”.

A wide variety of materials can be used in decoration, it all depends on the imagination and complexity of the design.

So, to make a throne you will need:

The bark of a tree, no matter what type, is approximately ten to fifteen centimeters long. It can be heterogeneous and of different sizes, but it is not necessary to adhere to the same standard length, this will give greater naturalness to this item.
Tools required for work:

a regular 700-gram hammer and a special wood cutter, as well as a silicone or glue gun to make the manufacturing process faster;
special glue in tubes for gluing wooden products;
ordinary white sheets of A4 format, about a dozen pieces;
You will also need small pieces of plywood.

Step one. Preparing the bark and laying it in layers followed by gluing

Depending on the size of the throne, we wrap the frame of the product with an A4 sheet in the form of a rectangular frame as a template. This way we can select the required size of the bark, having previously given it the desired shape using the above tools. It will be important to adjust the thickness of the bark using a cutter, which should vary from 0.4 to 0.6 mm. Our bark is of different lengths, while we lay its first layer exactly, and with the help of a special gun we squeeze out special glue from the tube.

Step two. Preparing the base of the throne

It is important to note that the most even pieces of tree bark should be placed under the base of the structure so that they do not differ greatly in thickness and size. All this will give our throne greater stability and strength. Then we lay a second layer of bark on top of the first and apply glue again, but this time we give time for the layers of bark to bond together.

A pause of ten to fifteen minutes will be sufficient. Also, if necessary, if gaps appear between the layers, cut more small pieces of bark and carefully glue them.

Step three. Preparing the main frame

After the second layer is ready, we begin laying out the subsequent rows with tree bark. The most optimal number of them will be at least five with a standard length of approximately 100 x 100 millimeters. It is necessary to give these layers more time to set. It is strictly forbidden to use the throne until the bark on it has dried properly, otherwise this may lead to its peeling and breakage of the entire structure.

Throne chair in the interior of a residential apartment

The throne chair will fit well into the following interior styles:

classic;
baroque;
rococo;
Gothic;
classicism;
Renaissance;
English style.

All these traditional stylistics are still used, albeit in a somewhat transformed form. Interior design in Baroque, Gothic or any other of the listed styles using various throne chairs should be implemented in spacious rooms. Such furniture will fit most successfully into living rooms and dining rooms. But in small rooms it will look bulky and awkward. Which throne to choose is up to you. It can be decorated with upholstery made of expensive fabrics, elaborate carvings, beautiful pillows or a footstool.

Table decor

And, of course, what is a holiday without a feast? Even if the hero of the occasion does not sit with everyone at the festive table, table decor is an important component of the holiday design. Prepare an elegant tablecloth and cutlery in advance. And you can read about the beautiful details of table setting in our article “

Armchairs are integral functional elements of modern interiors. In addition, such products perfectly complement the design of the room, bringing comfort and coziness to the environment. One of the most interesting and unusual options is the throne chair. Previously, such elements were often used to furnish spacious rooms in expensive houses.

Design Features

A royal chair can be recognized even without knowing its features. In the interior it is used both functionally and as a decorative item. The distinctive features of this model include:

Impressive dimensions. The seat is wide, buried in a frame of massive carved armrests. The back is quite high and has a complex geometry.
Curved legs. As a rule, these elements have a small height, but in some cases it can reach 30–40 cm.
Majestic performance. Lots of carved details and scrollwork, gilded plating, expensive quality fabrics draped to perfection. The ability to emphasize the status of the owner is limited only by the designer’s imagination.
Expensive materials. Only high-quality, “status” raw materials are used for production.
High price. Luxurious and unique furniture is an expensive pleasure. Often such models exceed the cost of designer products, especially since mass production of “thrones” is not practiced today.

This furniture can only be used in designs that are characterized by luxury and splendor. An important requirement is also the availability of free space. If these two conditions are not met, the throne chair will look ridiculous.

The throne chair is always made by hand. The demand for such furniture is not so great, besides, the carved parts are so small and elegant that only an experienced craftsman can handle the work.

Majestic performance

Expensive materials

Impressive dimensions

Wood as the main material

Making a wooden chair can be quite easy if you choose the appropriate method. You can use an old armchair or stool if it is not possible to purchase individual parts. Even from a banquette you can make a small chair that any child will like. To create a classic chair, boards, bars, and logs are usually used. A solid wood product has a number of advantages over other pieces of furniture, because wood is an environmentally friendly material that is absolutely harmless to health.

Natural wood is not a cheap material, but it is the key to the quality of a homemade chair. Once you are confident that the wood is of high quality, you can begin creating a work of art. There should be no knots or cracks on solid wood or bars. All parts must be carefully polished, and only then proceed to assembly. A special coating will protect the material from insect attack and drying out.

To make a chair, it is better to use oak, birch, ash or alder, because they have a unique beauty. These materials allow the product to serve for a long time without squeaking or cracking. The beauty of the product can be emphasized by high-quality textiles that will be used for its upholstery.

Wood is very durable and can compete even with metal. It does not lend itself to plastic deformation and withstands shocks and loads well. It is easy to work with, and therefore you can make a chair from wood yourself. The disadvantages of this material include intolerance to moisture and high temperatures. When exposed to water, wood swells and crumbles, so you need to first coat it with varnish.

How to do it yourself?

If you decide to complement the interior of the room with a throne chair, but did not find a suitable option in the stores, you can make such furniture yourself. Basically, it is created on the basis of a finished wooden chair and complemented with fabric elements. Therefore, first you need to decide on the design of the chair and select the necessary material.

Stages:

So, first you need to cut out a small rectangle from the filler. This can be standard foam rubber or padding polyester. The piece is fixed on the back of the product, which will provide additional comfort while sitting. Then you need to start creating the case. It is best to use high-quality and “noble” material for these purposes. Organza and velvet are often used to upholster a wooden throne.

Please note that the cover must completely cover the chair. You need to cut a wide strip of fabric and place it around the lower back. You need to tie a bow on the back of the chair

If you want to give the solid wood throne a more majestic look, then use large rhinestones for decoration.

See below for more details.

Materials for making a wooden chair

To make a wooden chair with your own hands, you need to select high-quality raw materials.

Main requirements for wood composition:

the humidity level should be no more than 9-12%;
cracks, deformations, branches, fungus on the surface are unacceptable;
strength, dense structure, ease of processing are important;
The amount of resin should be small.

It is recommended to buy raw materials with a small reserve, because During the furniture manufacturing process, chips and waste are possible when defects are detected.

To create a solid wood structure, the grade is important. When creating chairs for the street (gazebo, recreation area), varieties with a dense structure are recommended. An array of elm, pine, oak, walnut, ash, larch, and rowan is suitable.

For furniture intended for heavy loads, linden and alder wood is needed. Furniture made of yew looks impressive due to its red hue and texture with an original pattern. The dense structure of the array is difficult to process, but is more durable and resistant to mechanical damage.

Country furniture is made from willow, alder, and rattan. To use the chair in warm climates, grape vines are used, complemented by rattan. Beginning craftsmen are recommended to use bird cherry, because... The material is plastic, easy to bend, durable.

When preparing furniture for rooms with high humidity or installation near a pond, it is recommended to choose wood with a fine-pored structure. Oak, larch, and solid pine are optimal.

Spruce chairs are lightweight, easy to process, but have low resistance to mechanical damage and are not resistant to chips and deformations.

Color options

The coloring of the throne chair is designed to perform several functions at once. Furniture is part of the design of the entire room, it should echo it and fit harmoniously. At the same time, with the help of colors, the master emphasizes the high cost, uniqueness, and grandeur of the decoration. Such a massive object cannot stand modestly in the corner; its very appearance should emphasize the status of the owner. Wood is often treated with varnish and dark paints, which increases the effect of solemnity. Gold and silver plating, as well as a patina coating, add pomp.

The shade of the drapery directly depends on the color palette of the room. Red is considered the most popular; dark, deep and rich colors are also used. Noble emerald and solemn white are no less in demand. The owner may also give preference to non-standard colors.

Types of stepladder chair

Folding stairs can be presented in several types, let's look at them:

a high step stool looks like a tall stool with pull-out steps;
the transforming chair consists of three steps, and when folded it looks like a regular chair;
the transforming staircase includes steps that move out using guide runners for drawers;
step stool with a screw module for extending steps.

Transformers in appearance are not much different from ordinary chairs with backs. Such furniture can easily and harmoniously fit into any interior.

Chairs in the form of stepladders are divided into simple folding, stationary, telescopic and transformable models.

To make a step stool comfortable to use with your own hands, you will need to perform surface treatment. Requires grinding, priming and puttying of elements. Plastic or wooden plugs that match the design are used as plugs for self-tapping screws.

The product must be decorated; decorative finishing is done with paint and then with translucent varnish. It is recommended to apply at least 3 layers. After each protective coating, the product is thoroughly dried.

To create a bright decor, you can use paint in contrasting shades for the seat and back. Translucent varnishes are optimal for products with a classic design or decorated in the English style. A stepladder chair for Provence style rooms must be painted with a white color. Designs for a country-style apartment do not require careful processing and can be rough; you only need to emphasize the beauty of the wood with the help of clear varnish.

DIY Iron Throne from Game of Thrones! GAME OF THRONES!

Probably every fan of this fantasy drama imagined himself in the role of his favorite character. And I’m almost 100% sure that everyone thought about what they would look like on the iron throne! Well, admit it, you thought, didn’t you? By the way, what character do you see yourself playing? I'd be interested to know. Maybe it's just me, riding horses and flying dragons in my dreams? I decided to share an idea on how to make a budget “iron throne” with your own hands. Perhaps someone is as crazy a handmaker as I am! In fact, the idea was not spontaneous. I thought for a long time about how to prepare such an interesting, memorable and individual guy for his anniversary?! Actually, I didn’t have to think long about the theme, but how to put it all together and fit into my budget was a little puzzling at first?! First of all, I started looking for information on the Internet, where, by the way, I found a lot of suitable examples. But I’m not a blacksmith to work on metal, and I don’t have a garage to melt plastic. It's time to improvise! I decided to think associatively. What are the swords like? What is the easiest way to make them? The answer came naturally. Fillet! Ceiling plinth according to ours. I decided that this was the ideal option. Then it was up to the frame, although it was necessary to start with it. I took a regular chair. But the back of the chair made it very awkward to attach the swords, so if you have time, it's better to make a more comfortable frame, like just a square box or stool to which you attach the base. By the way, the base to which I attached the swords was made of polystyrene foam. You can, of course, choose polystyrene foam, but it is not strong enough and crumbles very much.

And so, after you have bought the basic materials, you can get to work.

*** List of materials***

2 sheets of polystyrene foam. Ceiling plinth. I had about 20-30 pieces. Each 2m. Tile adhesive. PVA glue. Black acrylic paint. 300ml. Gold paint. (spray paint works great) 1 fl. Oilcloth or newspapers. Old brush.

To your frame (chair, stool) you attach a backrest cut from polystyrene foam. This can be done using liquid nails or tape. It all depends on what material you have. I needed to secure the back to the frame, so I opted for tape.

The sides of the throne were also made of polystyrene foam. After that I started cutting swords from the ceiling plinth. When buying a plinth, you choose the width of your swords. All of mine were the same size except for the main two.

When I bought the paint, I was told that I could choose one defective baseboard as a gift, I chose the most beautiful one!

Tools and materials

So, in order to make a wooden chair yourself, you need to prepare a number of tools and materials. If we talk about tools, we should name:

plane;
Circular Saw;
drill;
screwdriver;
wood hacksaw;
milling cutter;
roulette;
pencil;
clamps.

If we talk about materials, then you will need to have on hand:

screws;
furniture glue;
sandpaper;
stain or drying oil;
masking tape;
cardboard for stencil;
dowel or lumber.

Here it should be understood that the choice of wood and the final processing technique will determine the ability of the chair to cope with the effects of natural factors, its stability, reliability and ability to withstand physical stress. For some reason, many people choose chipboard to create a chair, although this material is completely unsuitable for chairs. And especially for garden-type models. The reason is simple - extremely low resistance to moisture. And the strength of chipboard models will be lower than that of solid wood or timber models.

But natural wood, although not the most affordable material, is environmentally friendly and completely harmless. It will be the best solution if you want to make homemade chairs with your own hands. Before starting work, you should inspect the boards and bars for defects - cracks and knots. After this, the material is polished, protective materials are applied to it, and assembly is performed. If we talk about wood, then it would be best to take alder, ash, birch, and oak for such purposes.

There are two reasons here. The first is the presence of an unusual fiber pattern. The second is the high wear resistance of a product made from these materials. And the durability of such products will be high. The only drawback will be deformation under the influence of moisture and low resistance to fire. And one more important point that should also be prepared is drawings and diagrams. This issue should be decided when it is already known what material the furniture will be made from. There are several options to solve this problem:

make a drawing with your own hand, which will indicate the dimensions and features of this chair;
do it on a computer;
download the finished version on one of the specialized sites.

Which option is better to choose will depend on your drawing and computer skills.

Design Features

A royal chair can be recognized even without knowing its features. In the interior it is used both functionally and as a decorative item. The distinctive features of this model include:

Impressive dimensions. The seat is wide, buried in a frame of massive carved armrests. The back is quite high and has a complex geometry.
Curved legs. As a rule, these elements have a small height, but in some cases it can reach 30–40 cm.
Majestic performance. Lots of carved details and scrollwork, gilded plating, expensive quality fabrics draped to perfection. The ability to emphasize the status of the owner is limited only by the designer’s imagination.
Expensive materials. Only high-quality, “status” raw materials are used for production.
High price. Luxurious and unique furniture is an expensive pleasure. Often such models exceed the cost of designer products, especially since mass production of “thrones” is not practiced today.

Majestic performance

Expensive materials

Impressive dimensions

Table decor

Even from an ordinary chair you can make a real throne with your own hands. And its main feature is its chic and catchy design. Such chairs are used as interior decoration, for special events and holidays. Many details of these chairs are made by hand. It can be either bright fabric or carving. Styles with elaborate designs include Baroque and Rococo. Transforming an ordinary chair into an armchair in this style will not be difficult.

Source