How to attach a corner to a tabletop?

A kitchen countertop is not only an integral structural element of the set, but also an independent accent in the interior. In the IKEA catalog you can find options from the simplest to the unusual and unusual. But how to choose a countertop that is suitable in design and of high quality at the same time? We'll talk about each series in detail below.

How to install a plinth on a kitchen countertop: detailed instructions

How to attach a baseboard to a kitchen countertop, and is it necessary to do so? This part is also called molding. It closes the gap that forms even when tightly adjacent to the wall. It is quite difficult to adjust the dimensions if there is noticeable curvature of the wall, and even if this is corrected with a layer of plaster or plasterboard sheets, empty space will still remain. It can be sealed with sealant, but such a joint looks ugly. Construction mixtures will crack if the base is in motion, and the furniture is deformed during use. Chipboard and MDF sheets, as well as natural solid wood, bend slightly under load. A well-balanced system will become loose over time and a rigid seal made of fragile materials will not last long. The best solution is a decorative strip that you can install yourself - it’s not difficult to do.

Functions of the decorative strip

Protecting the joint from water - the cut of a sheet of chipboard or MDF is an open structure, vulnerable to moisture. Once inside, steam and drops destroy it. The edge swells and cracks. In addition, in conditions of constant dampness, it begins to rot. The result is an unpleasant odor that permeates the air and is transferred to items stored in the lower cabinets. Dampness spreads to furniture walls if their ends are not protected. Natural wood is less resistant to moisture. Unlike particle boards, it changes size and shape when wet and dry.
Fixing the cabinet - it rests on an elastic gasket. This reduces the load on the legs when loosening. If the legs are unbalanced and the cabinet is wobbly, the elastic rail will prevent it from hitting the wall and protect it from destruction. It can be glued and screwed with self-tapping screws, creating a reliable, stationary mount.
Decorative function - installing a kitchen plinth on the countertop allows you to close a gap with the wall that looks unattractive. Other methods are less effective.

Plastic skirting boards

The co-extrusion method is used in production; the main material is polyvinyl chloride. The geometric dimensions and shape of finished products can be any, depending on the wishes of customers.

The surface is decorated with a laminated film that can replicate the texture of any modern materials. Products on the modern market are smooth and shagreen, matte, glossy.

Types of moldings

Products differ in design, shape and material.

Differences in design

The outer part is a decorative profile. During production, a sealant is attached to the back to fill the gap. It can also be installed in a groove specially made for it in a sheet of chipboard. There are two main types of moldings.

Monolithic - the profile with the seal is smelted from one piece. They have increased rigidity and are therefore short-lived. The long service life of the gasket is ensured by its elasticity.
Universal - the rail is placed on a silicone seal. It is more flexible and lasts longer.

Materials

Wood - it undergoes treatment that increases resistance to external influences. The fibrous structure is covered by a protective shell. The cut is vulnerable to moisture and there is always a risk that the product will become unusable. Before installing the baseboard on the countertop, you need to make sure that it fits. The pattern of wood fibers goes well with different shades, but choosing a specific color to match the color of the countertop can be difficult. If in doubt, it is better to continue searching for the right color and texture. Products cannot be returned after installation.
Chipboard and MDF boards are available in a wide range, and finding the right shade is not difficult. Their durability depends on their quality. MDF has a long service life and high strength.
Artificial and natural stone is perhaps the most reliable finish, withstanding mechanical loads and invulnerable to moisture. Minerals do not tolerate high temperatures well, so they should not be attached near the stove or oven.
Aluminum and stainless steel - products are available with a natural metal surface or with a painted top. The planks can be smooth or textured. They are not afraid of dampness and high temperatures. Aluminum and steel surfaces tolerate detergents well.
Plastic - does not deteriorate when exposed to moisture, but melts easily even at low temperatures up to 100 degrees. Low quality products quickly lose their attractive appearance. PVC imitates different materials and textures, but the difference from the original is clearly noticeable.

How the baseboard is attached to the countertop in the kitchen

Structures can be removable or non-removable. In the first case, the rail can be removed when rearranging furniture, and then returned to its place. In the latter, it is attached tightly. Removable ones are attached to furniture. They are pressed tightly against the wall, but not fixed to it. Fixed ones are mounted only on the wall. You should not fix the seal on two surfaces at once - this will quickly deform.

Moldings are also collapsible and non-removable. Both types can be installed with screws or glue. The difference is that in the first case, a decorative profile is put on the seal, and in the second, a monolithic strip is attached.

The connection with screws is easy to disassemble and assemble, but their heads are visible on the surface. There are models with top bars that hide the heads. The adhesive connection cannot be disassembled. After dismantling, the part will most likely no longer be usable, since it is very difficult to remove the glue from its back side, and the new layer will only lie on a clean surface. When torn off, the rail can easily be damaged. There are products with holes for self-tapping screws. If they are not there, there is a risk of damaging the surface. Fragile products will crack when drilled. It is better to place them on silicone glue or another composition suitable for this material. It must be chosen correctly. What is suitable for wood is not always suitable for artificial stone.

Step-by-step installation instructions

You should not try to install artificial and natural stone products yourself. They are installed by craftsmen along with the headset. Professional equipment is required for cutting and other operations. Our instructions are intended for slats made of plastic, metal, wood and composites.

Required Tools

Hacksaw for wood or metal. The first option is only suitable for natural wood. For PVC, both options are suitable. It is more convenient to cut soft plastic with a carpenter's knife, which does not leave burrs, unlike a serrated blade.
Roulette.
Colorless silicone sealant that seals joints, or glue.
Screwdriver or screwdriver.

Screw mounting

The plinth is measured with a tape measure according to the width of the tabletop and the blanks are cut to the required length. It is better to cut prefabricated elements separately.
The sealant is tightly applied to the installation site and holes are drilled for the screws. The step between them is 15-30 cm. If you apply markings to the wall and moldings separately, the holes may not match. Fragile material should be handled carefully. To prevent it from cracking, it is first passed through with a thin drill. Fragile plastic may not withstand even such delicate intervention. In this case, it is better to use glue. You need to work on stone with a special drill with a concrete attachment. Do not turn on the drill in impact mode.
The joint can be treated with sealant. It will prevent moisture from getting into the open sections of chipboard or natural wood, but it will have to be cleaned off when rearranging.
The outer part is attached with latches to the base mounted along the perimeter, starting from the long side. A connecting corner element is placed at the corner. The second part of the decorative coating is inserted into it. After this, they press on it to snap the end onto the guide. The parts go inside under the corner by about 0.5 cm. The joints are treated with silicone glue.
The edges are covered with plugs that come with the rest of the parts.

For step-by-step instructions on how to install a baseboard on a kitchen countertop, watch the video.

Adhesive connection

The wall surface is cleaned of dust and dirt. Grease stains are removed with an alcohol solution. The profile must also be clean. Plaque significantly reduces adhesion.
The rear part is removed from the collapsible rail.
Measure the width of the base and cut a blank along it.
The base - a wall or tabletop - is coated with glue and the guide is pressed tightly against it. It needs to be kept in this position for several minutes. The setting time is indicated in the instructions on the package.
If there is a corner, installation of the outer part begins from there. First, install the corner element, then insert both sides into it by 2-5 mm.
The ends are closed with plugs.

Note! How to cover a computer chair with your own hands?

Sizes and prices

It is important to determine a few things before purchasing.

Standard or narrow surface required. Standard depth is 63.5 cm, for narrow kitchens - 45 cm (on request).
What height (thickness) is required? There are only two thickness options - 2.8 cm and 3.8 cm.

If you plan to install an induction hob with a built-in oven underneath, it is recommended to purchase a countertop with a thickness of 3.8 cm.

Length. Perhaps this is one of the disadvantages: most options are 186 cm, maximum 246 cm. If you install a corner set, then perhaps there will be no problems. Otherwise, you will have to make joints, which is not very good both aesthetically and from the point of view of moisture resistance.

In some series it is possible to make a tabletop up to 4 meters long to order, but this will cost much more. But it will be possible to avoid joints, and, therefore, reduce the risk of moisture getting inside the product.

Using the table below you can find the size option you need and get an idea of the price.

Note! The cost of most models is not calculated per meter, but per sheet of a product of a certain length - 186 cm and 246 cm, with the exception of those made to order (Ekbakken with a non-standard depth of 45 cm and some variants of the Selyan series).

To view the table below in full from your phone, scroll from right to left.

Series	Material	Dimensions, cm			Prices, rub.
Series	Material	Length	Depth	Thickness	Length 186 cm	Length 246 cm
LILTRESK	laminated chipboard	186 246	63,5	2,8	1990	2800
EKBAKKEN (marbled, concrete, double-sided)	laminated chipboard	186 246	63,5	2,8	3590	4490
EKBACKEN under wood (to order!)	laminated chipboard	10-400	45,1-63,5	2,8	From 3400 rub./meter
EKBACKEN anthracite	laminated chipboard	186 246	63,5	2,8	7990	9990
SELYAN (under a stone)	laminated chipboard	186 246	63,5	3,8	3990	4990
SELYAN (marble) to order!	laminated chipboard	10-400	45,1-63,5	3,8	From 3600/meter
VISTORP	laminated chipboard	186 246	64	3,8	4990	6490
HALLESTAD	laminated chipboard	186 246	63,5	3,8	4990	6490
CARLBY (birch)	Chipboard + birch veneer	186 246	63,5	3,8	6990	8990
CARLBY (oak)	Chipboard + oak veneer	186 246	63,5	3,8	7990	9990
CARLBY (walnut)	Chipboard + walnut veneer	186 246	63,5	3,8	8990	11990
MÖLLEKULLA	Chipboard + oak veneer	186 246	63,5	3,8	9990	12990
PINNARP	Chipboard + ash veneer	186 246	63,5	3,8	12990	16990
BARKABUDA	Chipboard + walnut veneer	186 246	63,5	3,8	14990	18990
SKOGSO	Chipboard + oak veneer	186 246	63,5	3,8	14990	18990
CASKER	Quartz composite	20-300	10-75,5	3	From RUB 49,990/meter
LAXNE	Acrylic	20-365	10-75,5	4	From RUB 39,990/meter

*Prices are current as of the date of writing and may change slightly. You can check the information on the official website or by writing to us in the comments to this article.

For an up-to-date and informative overview of all options directly from the store with an analysis of the pros and cons of each, watch the video:

Care instructions

There are special care products for each material. For example, special polishes are used for solid wood. There are cleaning products for aluminum and stone. If the dirt comes off well, it should be removed with a damp sponge or rag. It is undesirable to use chemicals, as it accumulates in the joints, forming a solid deposit.

Do not remove stubborn stains with aggressive chemicals - they can damage the coating. Powders need to be diluted in water to dissolve solid particles - they will leave scratches on the surface.

How to attach a baseboard to a kitchen countertop: choosing the best way

Why is this necessary?
Installation methods
Fasten with self-tapping screws
Fasten with glue
Let's sum it up

Hello, dear friends! Today I’ll talk to you about how to attach the baseboard to the countertop. There are several options. But not all of them are worth using.

Skirting boards are used not only on the floor, but also in the kitchen when assembling a set. It covers the joint between the countertop and the wall. It is also possible to attach it to a tabletop or backsplash.

These elements differ from each other in shape, design, and materials of manufacture. The plastic and aluminum versions are mainly used. Wood, MDF and other materials are rarely used.

About the nuances of choosing material

There are several rules that help you avoid making mistakes when choosing:

Typically based on the color and materials used for the countertop. Plastic structures are considered universal because they can create an imitation for any surface.

It is important to follow the combination between the baseboard and other furniture that is already present. The answer to the question of which skirting boards are best for the kitchen depends on this.

Why is this necessary?

Before attaching the baseboard to the tabletop, many are interested in why this is necessary.

Not everyone understands its functions and tasks. But in vain. An important and also necessary element in the kitchen.

There are 3 main functions:

Disguise
. The gap between the headset and the wall looks ugly. It should be covered with molding. It's a plinth. It hides all defects and also forms a complete picture;
Protection
. I consider the main function to be protection from moisture. When cooking and cleaning, water and dirt get into the joints. Over time they accumulate there. Water pours behind the furniture. It mixes with garbage there. The process of decay begins. As a result, the furniture deteriorates and an unpleasant odor forms on the furniture. This is a source of mold and mildew. If you install a plinth, all these problems will be eliminated;
Decorative effect
. Modern skirting boards are beautiful and are also made in the style of kitchen furniture. They decorate it perfectly and complement it visually.

These reasons are enough to take moldings from Leroy Merlin or another store and install them in your kitchen.

Design and materials

The tabletop can act as a style-forming element in the design. Ikea has both universal and neutral ones that will suit almost any interior, as well as completely unusual ones - for example, metal or concrete.

Today at IKEA you can purchase countertops from the following materials:

laminated chipboard (mostly);
natural wood or veneer - oak, ash, walnut, birch;
quartz composite or acrylic.

From laminated chipboard

The following series are made from laminated chipboard.

“Lilträsk” is pure white. Has a slightly rounded edge. This is the most budget option of all presented in the catalog. Versatile in design, but looks best in modern style kitchens.

Cost for 186 cm - 1,990 rubles, for 246 cm - 2,800 rubles.

"Ekbakken." This series has a choice of different design options: wood, marble, concrete; double-sided (gray or white).

The cost for a sheet of chipboard 186 cm is 3,590 rubles, for 246 cm – 4,490 rubles.

Imitation wood is an excellent option if you want a practical surface that is easy to maintain, unlike natural wood. Light wood will harmoniously fit into a country, Provence, Scandi or loft kitchen.

Wood-look Ekbakken can be made to order in the most non-standard sizes. See the table above for possible lengths and depths. The cost is calculated per meter and starts from 3,400 rubles.

“Ekbakken” under wood
Imitation marble looks beautiful, but a dark surface will require more careful care: water stains, stains and dried drops will look untidy.

"Marbled Ekbakken"

A concrete countertop is an ideal solution for loft-style interiors. At the same time, the light surface is more practical to clean.

"Ekbakken" for concrete

An unusual solution is a double-sided option, which can be installed on either side - white or light gray. The surface is homogeneous, without inclusions or patterns. Reminiscent of “Lilträsk”, but unlike it, it has a perfectly straight edge. Slim, minimalistic and stylish. Perfect for a modern kitchen.

Separately, it is worth highlighting “Ekbakken” in anthracite color (charcoal). The rough matte surface looks unusual and modern. It is capricious in care, because... streaks and dried water are more noticeable on a dark table. An excellent option if the interior concept involves using exactly this shade in the design to create the desired effects.

“Ekbakken” in anthracite shade costs almost 2 times more – 7,990 rubles. for 186 cm and 9,990 rubles. per sheet 246 cm long.

"Selyan". They differ from the previous ones in their greater thickness - 38 mm. This series also has several design options: stone-like with small and large inclusions, marble-like.

The cost of a sheet 186 cm long is 3,990 rubles, 246 cm is 4,990 rubles.

The marble pattern “Selyan” looks more noble and natural than its analogue from the “Ekbakken” series, but “Selyan” costs more than 2 times more. You can compare their textures in the photo below.

Ikea produces Selyan marbled to order (see the possible sizes in the table above). The cost is calculated per meter and starts from 3,600 rubles for a narrow meter sheet.

“Selyan” marbled (on order) Narrow table top 45 cm deep

"Wisthorp." A distinctive feature of this option is the metal edging, which performs not only protective, but also decorative functions. The surface is black, without a pattern.

The cost for a sheet 186 cm long is 4,990 rubles, for 246 cm - 6,490.

"Hallestad". This series is represented by only one tabletop, which has an unusual design - aluminum edging, double-sided surface - white or metallic.

The cost for a length of 186 cm is 4,990 rubles, for 246 cm – 6,490.

Thickness – maximum – 38 mm.

Imitation of a metal surface is good because it allows you to turn a bold design solution into reality and at the same time eliminate the disadvantages of real metal.

Wooden (veneered)

IKEA models made of natural wood are very famous among buyers. And the fashion for Scandinavian interiors has only contributed to an increase in demand for them. It was especially common to see beautiful white kitchens with wooden countertops.

But not everyone was ultimately happy with the purchase. Opinions regarding quality varied greatly. This material is very demanding not only in care, but also in operation.

The wooden surface requires careful handling - you cannot cut food on it, you cannot spill colored drinks (juices, wine, etc.). The product must be regularly coated with protective oil to extend its service life. Without proper care, the surface will quickly absorb dirt. Over time, cracks and chips may appear. Moisture that gets inside can trigger rotting processes.

In addition to troublesome maintenance, wooden countertops have another drawback - a relatively high price. But compared to stone, this material will be much cheaper. For those who value naturalness and environmental friendliness in the interior, this option may be a compromise.

Despite some of the disadvantages of wood, it also has one very valuable advantage (besides its environmental friendliness and naturalness). In case of damage, the wood can be restored - sanded, bleached if necessary, and re-oiled. In this case, the repair can be done with your own hands.

The dimensions of veneer countertops are more standardized than those made from chipboard:

thickness of all options - 38 mm;
depth – 63.5 cm;
length – 186 or 246 cm.

The material for manufacturing is the same chipboard, covered with a layer of veneer from birch, ash, oak, and walnut. This allows you to make the product more practical and affordable.

The product, ready for sale, already has an oil-acrylic impregnation, which creates a hard protective film on the surface over a certain period of time. After its service life has expired, the surface treatment procedure should be repeated. Wood care products can also be purchased at IKEA.

Depending on the veneer used in the finishing layer of the countertop, the price also differs. The most inexpensive is with birch veneer in the “Carlby” series. Its cost is 6,990 rubles. for a sheet 186 cm long and 8,990 rub. for 246 cm.

“Carlby” with birch veneer
“Carlby” with oak veneer and a top layer of walnut will cost more. Below you can see photos of the interior and prices of each option.

With oak veneer. Cost for 186 cm – 7,990 rubles; 246 cm – 9,990 rub. Walnut. Price for length 186 cm – RUR 8,990; for 246 cm – 11,990 rub.

The “Möllekulla” (oak) and “Pinnarp” (ash) series are in the middle price category. They are distinguished from other more budget-friendly options by a more uniform wood grain.

"Möllekulla." Price per sheet 186 cm - 9,900 rubles, 246 cm - 12,990 rubles. "Pinnarp." The cost of length 186 cm is 12,990 rubles; 246 cm – 16,990 rub.

Countertops “Barkabuda” (walnut) and “Skogso” (oak) are the most expensive. Their cost starts from 14,990 rubles. for a minimum length of 186 cm. They have beautiful and unusual patterns - herringbone and chess.

"Barkabuda"

Watch a useful video on how to properly care for a wooden countertop:

Stone

Quartz composite and acrylic countertops are new to Ikea. You will find them in the Kasker and Laksne series. Can only be purchased by pre-order.

Cost - from 39 thousand rubles / meter.

“Karsker” and “Laksne” are presented in several design options:

marbled beige;
white marbled;
black with splashes;
gray with small inclusions.

Let's sum it up

Finding the best way is objectively difficult.

But I can draw the following conclusions:

For solid plastic skirting boards, only fastening with glue is suitable;
if it is a collapsible plastic flexible plinth, then you can use glue or self-tapping screws of your choice;
You need to drill into the plastic carefully, and you shouldn’t screw a self-tapping screw directly into the plastic without a drill, otherwise it will crack;
for aluminum baseboards, use self-tapping screws supplemented with sealant;
if you plan to regularly move furniture and remove baseboards, then silicone will not work;
try to mount the element to the countertop and not to the wall.

If you disagree with something, you can write in the comments. Let's discuss some additional issues.

Is it possible to place a bed opposite the door?
How to sell furniture active sales?
Adhesive paper for furniture

By the way, this article contains details about the choice of sealant for our purposes and more.

Which mounting option did you choose? Which skirting board do you prefer and why? Did you make any mistakes during installation, and what were they? What advice can you give to beginners?

All that remains is to hear your answers, as well as stories from your life.

We attach the baseboard to the tabletop ourselves.

Many women spend most of their time in the kitchen, so they strive to make it as cozy and comfortable as possible.

Skirting boards attached to the countertop and closing the gap between it and the wall will give the kitchen set a decent look.

The presence of baseboards is necessary in any kitchen, purchased in a store, ordered in a workshop or made by hand, as it has practical functionality.

The appearance and cleanliness of the kitchen will depend on its correct installation.

With aluminum base

In terms of the ratio between price and quality, this option is recognized as one of the best. The surface is textured or polished. Some models have interchangeable color strips, which are sold separately in roll form.

The tape is easy to tear off and replace with new elements when the need arises. The color is chosen to match the kitchen units themselves or the countertops.

Aluminum skirting boards for kitchens also have a whole range of advantages:

Appearance.
Universal purpose.
Easy surface cleaning.
Easy installation.
Resistance to variable humidity and ultraviolet radiation.
Heat resistance. The molding is installed directly next to the household appliances themselves.
Protection from mechanical damage.

The high cost is considered a negative side, but the costs are offset by the benefits.

Types and purpose of plinths

In the space that appears after installation of the kitchen unit between the wall and the furniture, moisture, food residues and other particles that are difficult to remove can accumulate.

Because of them, an unpleasant odor may arise and even the process of rotting may begin, which can lead to the destruction of furniture and the appearance of unpleasant insects.

In order to avoid such consequences, there is a kitchen baseboard that ensures cleanliness in the kitchen.

The plinth consists of a strip and a guide that is attached to the tabletop, and onto which the plinth is subsequently “put on.”

It also helps to hide small defects in built-in utensils that arise as a result of uneven walls or other reasons.

The plinth will perfectly close all the cracks and gaps, firmly connect the joints that appear at the edges of the tabletop and apron, and hold together all surfaces located at different angles.

The set, purchased to order, is equipped with a kitchen plinth, necessary fittings, plugs, and joint elements.

Furniture and related accessories in such cases are made of the same or similar material, the same color and texture.

If you purchase ready-made furniture in retail chains, you will have to buy the baseboard yourself.

In this option, it is worth remembering that the baseboard must be combined in all respects with the set.

If the composition of the purchased countertop is made to look like stone, then the accompanying equipment is similar.

For a countertop made of natural or artificial stone, it is best to buy a marble or metal-plastic plinth.

A wooden plinth is ideal for a countertop made of chipboard or natural wood.

For a stainless steel table, the optimal solution would be to install an aluminum or stainless steel baseboard.

Aluminum structures or their plastic imitations are available for sale, which will bring them to the desired size.

Ready-made skirting boards for countertops come in a variety of colors.

The most popular among kitchen baseboards are products made of plastic and aluminum. They are used in those cases when selecting fittings from a similar texture to the entire set is impossible.

Aluminum and plastic are considered universal.

Plastic plinth - polyvinyl chloride, made by extrusion. The plastic melts, and the necessary pigment is added to it for the desired color.

You can laminate the top layer with different films that imitate the texture of the base of the baseboard.

The most common textures are stone, metal or wood. The surface of the coating can be smooth, shagreen, matte or glossy.

The advantage of plastic is a rich range of colors and sizes, easy installation and flexibility.

Plastic is resistant to moisture, environmentally friendly and has an inexpensive price range. The material is very convenient in cases of uneven walls and complex shapes. Aluminum plinth is durable, as a special oxide film is applied to it. It helps to withstand various loads and easily tolerates various cleaning agents, including aggressive ones.

The material is durable and heat resistant.

Fittings of this type are preferable for protecting the space separating the countertop from the stove or oven.

Aluminum is slightly higher in price, but still acceptable for all segments of the population.

Skirting

Ikea has only 2 options for wall borders - gray plastic (for laminated chipboard countertops) and solid oak wood (for veneer). Despite the universal design, the plastic skirting board will not look harmonious with all models. But such an insignificant detail can be purchased at another store if desired.

With plastic plinth Oak kitchen plinth

How the device is attached

The set of accessories for the table top is equipped with shaped and shaped profiles of three, three and a half and four meters. The silicone seal is located along the length of the structure.

When fixing the baseboard, the silicone adheres firmly to the surface, sealing the joints and preventing moisture from penetrating the ends of the tabletop.

The wall plinth has the shape of an equilateral triangle or boot, extended upward.

The base is fastened with self-tapping screws, and a decorative insert is secured at the top of the base until it clicks.

Fasteners include right- and left-side end caps and angle brackets attached to the outer sides.

All fittings have the same color as the baseboards.

Installation is easy.

First, measure the tabletop from the corner and “cut off” the required part of the profile using a hacksaw.
Clean the end parts with abrasive material. The gap from the tabletop to the apron is treated with sealed material for better adhesion.
The base of the plinth is placed at the joint and screwed to the tabletop.

If you attach metal or wooden baseboards with screws, then be sure to treat the edges with silicone.

Finally, we secure the corners and the front part by snapping it into the base, according to the instructions.

To accurately fit the decorative insert, you need to cut the strip correctly, subtracting three to five millimeters from the long sides of the tabletop when taking measurements. The insert is fixed in the corners by pressing. A click will notify you that the bar has been successfully and tightly fixed. The side elements of the decorative part are also installed.

Installing the plugs will complete the job of securing the baseboard.

Using silicone sealant, treat all elements before fastening, wait until it “sets.” This procedure is necessary for proper fixation and tight fit to the surface. Then insert and press the plugs.

The baseboard will provide the kitchen with sterility, cleanliness and freshness, which is what this room should have.

The installation of skirting boards using glue is practically the same. This method is less time-consuming, but does not allow you to hide kitchen appliances, since it fits firmly to the wall. And it will be almost impossible to remove the layer of glue after dismantling the kitchen baseboard.

In addition, the kitchen plinth will help you hide defects in the built-in kitchen and make its position visually more even.

Common forms

Molding in construction stores comes in the following forms:

Note!

Kitchen in light colors - overview of interiors in loft, hi-tech, minimalism and Scandinavian styles (photo + video)
Photo wallpaper for a children's room: rules for choosing, recommendations for combination, photo and video tips for a boy's and girl's room
How to choose the right washable wallpaper for the kitchen: video instructions, tips and recommendations from craftsmen and designers

Curly and rounded products.
Flat baguettes.
Rectangular cases.
Triangular products.

The width is selected depending on which gap is being closed. The length in most cases will be 3-4 meters. Additional parts will also be required in the form of corners and plugs, and other connecting parts. They are also required for kitchen floor skirting boards.

Aluminum baguettes always have a base, which is attached to other surfaces with self-tapping screws. It is complemented by a decorative coating. Stone moldings are monolithic; special sealants are used to fix them.

Depending on the method of fastening to the tabletop, the following types can be distinguished:

Decorative films that are mounted on the base with special silicone inserts. The latter are located both at the bottom and at the top of the product. The installation method is relevant in the case of plastic moldings.

When silicone inserts are placed directly on mounting rails. The decorative strip is located in the front part. Such designs are relevant if the main material is aluminum.

Fixing a base with a small area on the tabletop. The decorative film is snapped into a special groove, although a silicone layer is also present.

Installing a baguette is not so difficult; you just need to understand the main stages of the work. Instructions for working with skirting boards are issued by the manufacturers themselves.

Kitchen plinth for countertops and its installation

Hello dear friends.

Today we will talk about plinths that are installed on countertops.

When installing a kitchen set, there is always a small gap between the countertop and the wall to which it is pressed. If the wall is curved (convex or concave), then the gap is quite large.

To hide such gaps, as well as to isolate kitchen drawers and facades from water, there are baseboards.

When installing them, even uneven walls are “leveled”, as it creates the effect of a perfectly even joint between the wall and the countertop.

The plinth for the tabletop can be of different configurations and sizes. But its design and installation are the same in any version.

It consists directly of a plastic tape and a guide, which is attached to the tabletop, and on which it is “put on”.

This plastic guide has a special groove into which the tape fits, snapping into it with a “lock”. This guide is attached to the table either with shoe nails (25mm) or self-tapping screws. When attaching, you need to press this guide firmly against the wall so that there is no gap between the wall and the tape.

For the installation itself, the tools you will need are:

Hammer with nails (or screwdriver with self-tapping screws)
Shoe knife
Silicone
Hacksaw for metal

The kit for the plinth also includes special corners. They can be internal, external, end. The outer corners are placed on the ends of the tape, and the corners are formed using the inner corners (all corners are attached with silicone).

First, measure the size of the guide for a specific wing of the table. Its size should be 100-200mm smaller than the actual one (for example, the guide should not “reach” the corner and the edge of the tabletop by 50-100mm).

You can, of course, install the plinth without cutting the guides to the dimensions indicated above (as shown in the pictures), but, in my opinion, the installation will be easier in the first option.

Having measured the required size, the guide is cut with a hacksaw for metal, after which it is attached to the surface.

If a corner joint is made, then a plastic corner is installed in the corner, and one wing of the plinth is installed (it is inserted into an already fixed guide, and inserted into the corner itself).

It should be noted that before installing the tape in the guide, on the table (right next to the guide itself), you need to apply a layer of silicone. Silicone forms a strong barrier between the baseboard and the countertop.

When one “branch” of the plinth with a corner corner is installed, the dimensions for the second, joining branch are measured in the same way. The second branch is installed, and at the end, silicone end caps (corners) are placed on the ends of the baseboards.

During the work process, sometimes you have to use a shoemaker’s knife to trim the tape (or its protrusions for the grooves for the guide) in order to insert it into the guide.

When the baseboard is installed, remove any remaining silicone with a rag.

Thus, by installing the plinth on the kitchen countertop, all the gaps between it and the wall are hidden, and an excellent waterproof layer is formed.

Installing skirting boards on a kitchen countertop

Before cutting the baseboard, it is important to remember to take into account the dimensions of the caps and corner joints. It's not difficult to figure this out. After the baseboards are cut to size, it is worth degreasing the tabletop. I do this with acetone. then you need to ask for silicone

If the kitchen is corner, then I pour more silicone into the very corner. Since the corners are the weakest points. then you can screw it on. I don't recommend pressing it too hard against the wall. It is usually enough to press. Otherwise, the decorative part of the plinth may not fit correctly.

After the plinth is screwed in, everything needs to be coated with silicone. Joint with the countertop, apron and fill in the screw heads. This is the most important moment of the entire kitchen installation!

Then we attach the decorative insert. If the silicone is squeezed out in places, it is not a problem. It can be easily erased. I use Solvent for this. It doesn't corrode plastic, but it washes well.

That's all. Thanks to this, many problems can be avoided. Not all installers comply with this, and when a defect is discovered, the warranty is usually limited.

Possible duplicates found

Chipboard will die faster in the sink area than in the baseboard area, especially if the baseboard is normal with a rubber seal.

As a rule, the base under the sink dies first, the next base is next to the oven and the bases to the left/right of the hood.

then the edge of the PVC above the hob near the facades begins to peel off (and the film on the facades begins to swell), the countertop (if it is not made of marble or stone) near the sink begins to “wipe”, because The water next to it is constantly being wiped off. and yes, the wife can hit this corner with cleaning agent, which then turns into a black and gray speck.

what performance?? this is an experience.

What experience? How many kitchens, how many years? I ruined the whole kitchen with white sealant.

IBD when installing a kitchen to look like a pro.

there is no hood - the facades are damaged due to oil, grease, soot

Oh, how the sink is poorly located, there will always be puddles on the left.

Using wall panels 1200mm wide could have been done better.

I also didn’t understand why the sealant was needed, I installed the baseboard with tension - the silicone sides will hold back light splashes and spilled water. And another question, to the right of the sink there is a blind corner cabinet, why would there be connections to the water supply there? Maybe the metal plastic should be taken directly under the sink? Is there a pull-out shelf in a semicircle?

Silicone you are all wrong..

In the last photo, everything seems to be fine - with silicone there is a pronounced upper limit, but here, how smooth it is :)

they inserted (implants) into the bottom, and the bodice of the dress had such support.

Well, apparently not, I Googled the picture and immediately found out that it was Lindsey Pelas - a model with natural breasts, here is the proof: https://www.thesun.co.uk/fabulous/5070768/model-lindsey-pela.

I would move the slab to the right so that there is more work space

Is this a makeshift kitchen?

How much did you come up with based on materials without taking into account household appliances?

When I was looking for a plinth for my kitchen, I couldn’t find any normal ones at all. All of them are ugly, either too wide, or tall, or simply scary. In the end, I took the layout for the inner corner of the tile.

If this is an advertisement for your furniture services, then only for the naive.

-Oh God, look, he degreases it, silicones it twice and wipes it with solvent.

And he also calls the priest to illuminate all this, dances with a tambourine and cuts a lamb.

No silicone needed. What kind of silicone sealant lovers? One “master” installed a toilet for me (I discovered 4 years later) that everything is silicone-coated: the tank is on silicone, the drain fittings are all attached to silicone where the threads are tightly sealed. Water filter with silicone threads. You'll figure it out. They also like to silicone the joints of MDF skirting boards and platbands.

And then you can’t move the kitchen away from the wall if something happens.

Silicone parts can be disassembled very easily; it is not glue but just a sealant.

You just need to silicone only the places where the gaskets adhere to the body parts. They use it in droves only because the quality of casting parts and gasket material is very poor, especially often on inexpensive models.

I myself often use sealant, it’s not always possible to go to the store, and it’s not a fact that you’ll find something useful, and clients often don’t want to buy a replacement, the main thing is to apply it without fanaticism.

We had to install shower cabins that were not equipped with seals and all sorts of rubber gaskets, without sealant, otherwise it would leak like a colander.

If they assembled it for you without gaskets, but only with silicone, then of course it’s fucked up.

Well, take a look at the plastic thread of the toilet fittings, which someone “for reliability”, but in fact, due to their own crookedness, generously asked for silicone.

Disassembled 100500 times. Including at home, five times already, because the quality of the water causes the fittings to fail. From time to time I also disassemble, change, repair clients’, and everything unscrews without any problems.

Maybe in your case they didn’t use silicone, but some kind of glue, I recently encountered something like this, the curtain was sealed with some kind of shit by some people, I barely pulled it off the tile, I ended up with two chips.

Why move the kitchen away from the wall?

Some pipe will leak behind the sink and, for example, it will need to be welded or replaced. And you can’t get through there without moving away.

The bases can be removed individually without touching the adjacent ones or touching the countertop.

It depends on the configuration. Not always. It’s generally difficult with corners.

This means the next base is taken out and the corner one is taken out. The built-in refrigerator is more complex and the base of the refrigerator is tied to the cornice - then it’s a long story with disassembly.