Two-color stretch ceilings in the interior - subtleties of selection and the best examples

When deciding what you want your ceiling surface to look like, be sure to pay attention to two-color stretch ceilings, which look preferable and richer in the photo than the usual plain options. This is one of the notable trends in recent years, which has made it possible to bring ceiling decoration to a qualitatively new decorative level. In addition, unlimited possibilities in terms of color combinations allow you to give the interior a unique, memorable style. The originality of the design is what really leaves no one indifferent. Let's take a closer look at the use of two-color stretch ceilings in practice.

1. 3 installation methods;
2. All the benefits;
3. Are there any disadvantages?;
4. Choice of color combination;
5. Interior use;
6. Conclusion.

In the interior of the living room

Two-color canvas is often used to decorate rooms: it helps to visually zone a room, and with the right combination of colors makes it more spacious.

Two-level ceilings look good, where the main tone duplicates the shade of the furniture. You can use the proven combination of lilac and white - a stylish option that significantly refreshes the room.

In this case, it is better to choose purple tones for furniture and make the walls white - the two-color design of the room looks beautiful and unusual.

The classic combination of black and white is also suitable - it looks better on a plain surface. In this case, make sure that the soldering is done carefully - any defects are noticeable and slightly spoil the final appearance of the canvas.

A design like the one in the photo is ideal for a high-tech living room.

If the previous option seems boring to you, combine white with bright colors, such as orange.

Important: Make sure that the furniture is in harmony with the chosen shade! To do this, it is better to use a color matching table or consult with designers. By the way, be sure to look at a large selection of photos of suspended ceilings in the living room interior. There are dozens of cool examples, not just two-color ones.

Installation steps

Installation of a two-color stretch ceiling in the hall is carried out in the following order:

• The ceiling surface is cleaned of old coating, paying attention to weak points, for example, peeling plaster. You can apply a layer of antifungal composition. Also at this stage, the integrity of the wiring is checked to prevent problems with lighting during operation.
• Next, markup is done. 2-3 cm are retreated from the main ceiling and a line is drawn that determines the level of the tension structure. If spotlights are used for lighting, then you can step back a little more. For high-quality markings, the lowest corner of the room is taken as the basis. The main condition is to draw a closed line around the perimeter of the walls.

• The next step is installing the baguettes. For more convenient installation, these elements are glued to the walls and then firmly fixed with self-tapping screws. The distance between the attachment points should be approximately 7 cm.
• Next, turn on the heat gun and heat the air in the room to + 650C.
• The roll of film is rolled out on the floor and straightened.
• Alligator clips are installed in the corners of the room, to which PVC film is attached.
• The corner is heated, the fabric is unhooked from the clothespin and, using a spatula, the edge is tucked into a special mechanism for fixing. Similar actions are performed with the remaining corners and proceed to areas on the walls.

In the bedroom interior

Depending on what effect you want to get when renovating your bedroom, you need to use different colors. Let's take a closer look?

A stretch ceiling with a plasterboard insert will help separate the sleeping area from the rest of the room - it’s functional, and if designed correctly, it’s very beautiful. This also makes it possible to differentiate colors, highlight the contrast of textures, and also install spotlights. On the other hand, choosing subtle colors will not make the transition too harsh.

A beige-white stretch ceiling with hidden lighting is well suited for small bedrooms: it will make them noticeably more spacious and brighter. Therefore, if the room is of the same size and the windows face north, we recommend that you try this option.

The combination of two colors of a stretch ceiling in this photo looks quite bold: the combination of pink and yellow is an unusual technique. You will need to buy appropriate furniture and textiles. But if you like bright solutions, try it! We are sure you will like the result.

In the same way, you can choose other contrasting shades: the main thing is that they are combined with each other. Still, bright red and light green are not the best choice for the bedroom.

Step-by-step technology

Two-color stretch fabrics do this:

1. First, a soldering scheme for the panels is developed. It is more convenient to do this on special computerized equipment.
2. After this, the PVC film is prepared and cut taking into account the size of the room and the location of the line of connection between coatings of different colors. As a rule, film sheets are cut 10-15 percent smaller than the ceiling dimensions, because the material is very elastic and stretches well after preheating.
3. Then the edge of one blade along the connection line is clamped in the soldering equipment. The edge of the second PVC film along the joining line is laid on top of the previously tucked panel.
4. After this, both halves of the films are carefully aligned along the weld and aligned with the electrode.
5. The fabrics are welded with high frequency currents.
6. After making the seam on the same equipment, a harpoon is welded around the perimeter of the panel - a thickening of PVC cord for threading the film into the baguette. The cord is also welded with high frequency currents.
7. Next, the coating prepared for installation is laid out on the packaging table, lined with thin paper and carefully rolled up for transportation to the installation site.

Advice! Since the beauty and service life of a stretch ceiling depends on the quality of the weld, order its production only from trusted companies.

In the interior of the kitchen

For the kitchen, two-color stretch ceilings are actually a must-have.

If your studio apartment has only a kitchen corner instead of a full kitchen, highlight it with a colored insert. A red and white ceiling looks good even in small spaces. Bright colors visually add some of the much-missed space, especially if you choose a glossy texture.

White and gray single-level canvas is suitable for spacious, bright rooms. Lack of sharp contrast - unobtrusive and elegant. By the way, you can experiment with the material - make one part glossy and the other matte.

Choose a ceiling that will be in harmony with the kitchen set and apron so that the room is decorated in the same style.

For example, a white canvas with red accents will go well with the corresponding furniture, but in a different environment it may seem too bright.

Types of textures of suspended ceilings

The appearance of the entire room will depend on the type of surface. There are three types:

• Glossy.
• Matte.
• Satin.

The photo shows a two-tone red and white gloss ceiling model in the kitchen.

In the interior of the nursery

The design of a room for children has always been distinguished by fewer conventions: a combination of colors, drawings, a large amount of thematic decor. The same applies to ceilings where two colors are used: you can allow solutions that would be too bold for the rest of the apartment.

The rays coming out of the corner, for example, white and blue, look beautiful. To complement the effect of the cosmic luminary, install a plasterboard insert in the shape of a rounded triangle in this corner. If desired, it can be illuminated from the inside - it seems to float in the air.

Lime-white flowers on a two-level ceiling will complement small green lamps well: they will emphasize the whiteness of the background, while harmonizing with the tension insert. Choose a fun curly chandelier that will create a complete composition.

A blue insert on a white ceiling may differ not only in color. Try to decorate a piece of a real starry sky there - both kids and older children will be delighted with this decision. Don't be afraid to experiment: a crescent-shaped chandelier or plasterboard clouds will complement the picture.

Installation of two-color panels

You can install a two-color stretch fabric without having any special professional skills. It is necessary to select the necessary canvases in advance and order soldering using special equipment.

It is quite difficult for one person to complete the installation, so it is better to invite an assistant. If you follow the technology when working, the ceiling will look impressive for many years.

Tension fabrics in two colors are a creative solution and a new word in design. They will make the interior harmonious, stylish, modern and add a touch of individuality to your interior.

In the bathroom interior

The combination of white and beige is a classic and familiar option for decorating the ceiling in the bathroom. This coating is suitable for small rooms: light colors make them feel more spacious. Choose a glossy texture to enhance the effect.

If you want to add color, opt for a different design - for example, white and red. The corresponding tiles, beautifully reflected in an almost mirror-like surface, will help add volume to the room. However, this solution is not suitable for everyone: too bright colors in a small room can tire the eyes.

Recently, unusual combinations have come into fashion - bright yellow and black look very impressive. True, in this case you will have to abandon white plumbing fixtures - they are unlikely to be appropriate.

By the way, it is not necessary to use both colors in equal quantities - the bright middle and dark outer stripes look beautiful even in a small room. Take care of good lighting: such tones can slightly hide the light, making the room visually darker than it actually is.

Important Tips

Before installation, you need to consider several recommendations.

1. Move furniture away from corners to make installation of the film easier. This especially applies to tall and bulky furniture.
2. Remove from the room all items that deteriorate at high temperatures. It is better to move plants, food, etc. to another room.
3. Make sure that the heat device is not pointed at the cylinders. It is strongly recommended that you move them to another room - this is a basic safety rule.
4. Close windows, vents and doors while heating the room and installing the canvas. If this condition is met, the desired temperature will be maintained and the film will be elastic.

Do-it-yourself stretch ceiling - step-by-step instructions

Prices for ceiling lamps

ceiling lamp

You can find a detailed guide to installing a stretch ceiling in this article! We also recommend reading about whether stretch ceilings are harmful to health.

In the interior of the office

Traditionally, discreet colors are used for the workroom: ones that will not distract from work. But this does not mean that you have to limit yourself to beige or brown plain fabric. The right combination is always appropriate. Make sure of this by looking at the following photos.

The beige and black ceiling looks quite strict, but it looks more original than the usual combination of black and white. It will not be difficult to choose furniture for such a covering, and the appearance is definitely worthy of high praise.

Psychologists believe that the color blue helps you concentrate. Use it! An illuminated matte blue insert is a great way to liven up a standard white ceiling a little.

By the way, soldered ceilings can visually continue into the walls - this will make the room seem much larger. Just choose a coating to match one of the colors on the ceiling and use thin, almost invisible skirting boards. In an office, this solution looks appropriate, while allowing you to move away from the standard business design of the room.

Selecting the type of canvas

When choosing a polyvinyl chloride film, you should pay attention to the type of canvas; its surface can be matte or glossy.

Each option has its own advantages and disadvantages, so it is important to remember the following:

• To decorate low ceilings, glossy canvases should be used. The mirror effect of such a surface visually increases the height of the room. In the case of high ceilings, it is recommended to purchase a matte canvas.

• Glossy and matte canvases can be combined. In this case, gloss is used to highlight a certain area, combining it with a matte canvas of basic colors.
• When choosing shades for a two-color stretch ceiling, you should take into account that glossy canvases have a larger color spectrum than matte ones.
• Matte canvas is more practical; after wet cleaning, stains are practically invisible on such a ceiling.

In the interior of the corridor

The hallway is considered one of the most difficult rooms for designer renovation - it is rare to find a room with the correct configuration. The correct selection of colors will help visually adjust the corridor.

If you are lucky enough to have a large, square hallway, install an obliquely soldered two-color ceiling. For example, white and brown. This combination is well suited to a classic interior and will emphasize the spaciousness of the room.

A red stretch fabric with a two-level plasterboard insert is suitable for an elongated room. The wavy version looks beautiful. In addition, it will add the missing volume.

If you want a bright hallway, try combining white or beige with a soft pink shade. For rooms with low walls, it is better to choose a single-level option - thanks to this combination of colors, it will make them taller.

Inserts of a different shade do not have to be made solid - glossy coffee squares will look good in the corridor. However, the shade depends on the overall design of the room.

To make any room look harmonious, use no more than three primary colors in the interior. We are sure that the photo collection we have collected will help you make your choice!

By the way, here is a good selection of colored stretch ceilings of various shades, as well as a number of design tips.

Tools and materials required for soldering

The strength and tightness of the welded seam is very high, because the connection of the blades occurs at the molecular level. In addition, the soldering area is practically not visible on the surface of the stretch ceiling. For welding, soldering equipment operating at high frequency currents is used.

HDTV materials and machines for the production of suspended ceilings

The film is heated pointwise, so the possibility of overheating and melting of the polyvinyl chloride material is completely eliminated. The soldering electrode first heats the film and then cools it itself.

Three types of electrodes are used for work:

• of steel;
• brass;
• aluminum

The electrode itself produces a seam of limited length, which depends on the size of the soldering device. To obtain a long weld, the sheets are applied to the electrode sequentially. The electrode has two ribs. One of them is clamped in a press, and the second one welds the sheets. To obtain a curved seam, folded panels are applied to the soldering equipment at a given angle.

Methods

You can connect the edges of the canvases for a stretch ceiling made of polyvinyl chloride using 4 methods. Among the available methods are the following.

1. Connection or high-frequency welding on a special press. Used by the largest companies, it ensures reliable fastening of the edges of the canvas.
2. Chemical bonding using chloroacetic or methyl chloride based substances. Quite a rare method, used in production to create non-standard design solutions.
3. Welding on rolls and presses. Carried out only in production, performed directly during the manufacture of products.
4. Roller soldering. Such machines are the most accessible and widespread. Almost any company that provides services for tensioning PVC ceiling structures has them.

Straightforward

This scheme involves connecting the smooth edges of the fabric. Welding PVC in this way is quick and ensures high reliability of seam soldering. The following technologies are used for soldering.

Processing on a roller machine. According to the principle of operation, it resembles a plotter for printing images on textiles. The edges to be joined are placed on the substrate, and a thermal roller is rolled along them on runners. Usually just one pass of heating the parts is enough to get a strong connection. The processing temperature corresponds to that needed to melt the vinyl.

Curvilinear

The soldering method, in which parts of a stretch ceiling are connected by smooth transitions and bends, is called curvilinear. It is technologically more complex than usual, since the slightest disruption to the production process affects the strength of the entire structure. It is quite difficult to accurately calculate the stretching of materials when fastening parts in this way.

It is important to understand that a curved seam is made in short straight sections of 10-15 cm to ensure uniform impact along the entire length. With different thicknesses of materials, the joint formed by the roller of the HDTV head becomes more noticeable

The need for seams

When installing suture stretch ceilings, it is important to remember that the maximum size of such a fabric reaches 2.7 meters. But the junction between the stripes can also be looked at on the positive side

Welded fabric is made of any size and configuration. You can combine fabrics of different colors and textures, making various combinations. The canvases are connected in a straight line, in arcs or in waves.

Photo of a ceiling with curves

It is necessary to discuss how and where the location of the scar will be during the period when suture stretch ceilings are ordered. At this point, consider the subtleties and dimensions of the room

It is important to consider how and where lighting fixtures will be installed on the ceiling and walls. After all, from them light also falls on the connections

Consider how the canvas will be installed along or across the surface. A long seam is less noticeable, the main thing is that it is not located next to the entrance doors.

Placing a joint correctly is an art mastered by a professional craftsman.