2021 ᐈ

Recommendations for selection

A bed with a loft is a complex structure that must be safe, durable, and comfortable for adults and children.

You can purchase a ready-made loft bed at a furniture store or order one based on your own design.

It is necessary to take into account the recommended height depending on the age of the children. The height of children's loft beds does not exceed 160 cm, teenage beds are made up to 180 cm high, and an adult loft is set above 200 cm.

Sellers of children's furniture are required to provide a certificate of quality and environmental safety of the product.

The fastening and fittings of the loft bed should not raise doubts about its reliability. There cannot be any traces of rust or chips on the fasteners; after assembly, the product must not become unsteady or squeak during use.
The loft of a bed for children should have high sides; a bed railing is also recommended for adult models.

Disadvantages of the “attic”

The advantages of such a furniture set are much greater than the disadvantages, however, they should be noted:

a high sleeping place does not allow parents to reach the child;
small children may be afraid of heights - for such children it is better to refuse this option;
if a child gets up at night to go to the toilet or drink water, going down in the dark can be traumatic;
falling from a height of almost two meters is dangerous and painful, so the bed must have reliable protective sides.

Cleaning the upper tier is not easy. If the baby gets sick, it is better to arrange another bed for the period of illness.

Important: You should not set up a loft bed for a preschooler under 6 years old.

Options for combining a loft bed

The loft bed is combined with different pieces of furniture: a desk, a second bed, shelves for books and toys, wardrobes or a chest of drawers for clothes, a sports complex.

With a table

Most often, the lower zone is equipped with a work desk. You can use a traditional desk with a cabinet, a lightweight roll-out table, or a dressing table with a mirror. A roll-out table frees up space under the attic for playing or cleaning when needed. The photo below shows an example of a desk for a schoolchild with bright red details and a desk for an adult made of natural wood.

The attic in both cases is fenced with railings 40 centimeters high.

Style solutions

The house on the bed can become the pearl of the room. An unusual model with a bed on top and an open lower floor, decorated as a forest house located in a tree, will look good in a room with beige walls, laconic light flooring, and a contrasting glossy dark ceiling. It will be even more interesting if you place glowing stars or bright lanterns under the ceiling.

All children dream of a tree house. This idea can be implemented at home

In a house intended for two girls, it is convenient to install a wooden bed in a delicate color. You can hang fabric curtains on it, cover the walls with light wallpaper, and cover the floor with a patchwork quilt or carpet. This way all pieces of furniture will look harmonious, it is desirable that light green, white or pink shades predominate.

Houses of delicate light shades can be installed in almost any interior

A luxurious bed that looks like a castle with towers used to store literature looks good in a snow-white room with floral prints. It is advisable to cover the floor in the room with a beige-gray laminate and hang a classic chandelier.

Any girl will love a pink house with a slide

With play area for children

Play is a child’s way of learning about the adult world. It is important for children to have a space where they not only play, but also learn to maintain order. A loft bed allows parents to organize a play area even in a small apartment.

The bed is combined with a slide, shelves for toys, and mats for outdoor games.

With a sofa below

A loft bed solves the problem of choosing: sofa or bed? In studios, the living room serves as a kitchen, dining room and living room, so it is logical to raise the bed up and not attract the attention of guests to it.

The sofa can come complete with a loft bed, or there is free space left for it under the sleeping bed.

With two beds

In a nursery for two or in student housing, it makes sense to use the lower floor for a second bed.

With dressing room

The free space under or next to the loft bed can be used for a wardrobe. The children's dressing room is equipped with drawers and shelves so that even a preschooler can get the right thing without the help of adults.

With wall bars

The health of children directly depends on their physical development. Exercises at the sports complex develop coordination, flexibility, and endurance. The Swedish wall has remained the most popular sports equipment for many years. It is mounted on the side or at the end of the bed, as a connecting element between the attic and the lower tier.

With a crib for a newborn

If the area of the room does not allow installing a crib for a newborn next to the parent’s bed, then you have to use a compact loft bed. In this case, it is better to choose the option with lighting under the attic, because parents have to go down to the baby several times a night.

It is not advisable to use the top tier for another child, as children may disturb each other at night.

Design and style

The loft bed is a unique design that allows you to save space and maintain the aesthetics of the space. There are many design options for such models:

Children's. Most often they are made in a certain style. Girls will love the fairy-tale design with castles and princesses. Boys prefer designs with a pirate or racing theme. Loft beds and buses are in fashion today.
Teenage. Boys of this age prefer models in the loft or minimalist style. Clear lines, regular shapes, dark colors (for example, wenge) are the main requirements for such beds. The most popular are loft beds with a sports complex. Girls prefer light designs with a canopy and multiple decorative elements.
Adults. Models for this age category are distinguished by a wide variety of design options: from laconic designs to asymmetrical shapes with abundant decoration.

The models under consideration can be placed:

In a small bedroom. Compact designs with drawers for things under the bed are perfect for such rooms.
In the nursery. The safest option for kids is a modification with a staircase-chest of drawers, a sleeping place and an area for study and creativity.
In a studio apartment. In a spacious room, you can choose a single or double loft bed, organizing a mini-living room or study underneath it.

In the space under the spacious sleeping area you can install bookcases, upholstered furniture, and a storage system.

Children's Teenage

Adult

Loft beds for adults and children

Children's

Even in a fairly spacious children's room, it makes sense to install this functional and compact type of furniture, thus freeing up a significant part of the space for outdoor games. When choosing a loft bed for children, you need to focus on age and personal preferences.

For kids, the convenience and comfort of the play area plays an important role; teenagers need more space for study, creativity or physical exercise.

Depending on the age of the child, several types of models are produced:

for children 2-5 years old with a low second tier with a total height of no more than a meter;
for children from 5 years old with play areas and a sleeping bed length of up to 160 cm;
the sleeping area is 1.3 m from the floor;
for schoolchildren with areas for study, sports and entertainment 150 cm long;
for teenagers 180 cm long;
the maximum height from the floor is 1.8 m, in this case the working space under the sleeping bed also increases.

Beds for children and teenagers are equipped not only with work areas, but also with play and sports areas. For two children, structures with paired sleeping places are installed.

If there are three children in the house, then you can buy a loft bed, equipped, in addition to the upper two beds, with a pull-out lower section.

If the room already has a desk, you can opt for a model with two functional zones. In this case, there will be more space for games and storage.

A loft bed with removable elements is very comfortable. In this case, it will “grow” with the child - at a certain point it will be possible to raise the sleeping place to a greater height and change individual parts.

For preschoolers

The industry produces special designs of such furniture intended for 2-5 year old children. Such models have a low sleeping place - the second tier is only a meter or even slightly lower from the floor. The semi-loft bed is equipped with additional sides of sufficient height.

The furniture is completely safe, without losing its functionality.

The height of the “ground floor” is quite enough for a baby. There is a desk where he can draw, as well as a “tent” for games. Pull-out elements located under the upper and lower tiers in the form of drawers are designed for storing children's things.

But still, the age at which a baby can be safely placed on the second “floor” of the bed at night is very individual. It is worth leaving him alone at the top only if he is not afraid of heights, sleeps peacefully and does not fidget in his sleep. Seat belts will also come in handy.

For teenagers

A teenager in adolescence especially needs periodic solitude. The allocated territory will allow him to calmly go about his business in his own cozy corner.

Such a loft bed should have enough shelves and drawers for rational organization of space.

For a teenager who spends a lot of time studying, it is necessary to choose models with a more spacious workplace and the ability to install a computer, printer, equipment for creative activities, etc.

A retractable corner table or a U-shaped table in this case will be the best options.

Don't forget about proper lighting. The lower tier is always insufficiently illuminated, so it will be necessary to install an additional, fairly bright light source. On the second floor you can install a small lamp for reading or viewing magazines.

For receiving guests and daytime relaxation, it is better to buy a loft bed with a pull-out sofa or couch.

It’s good if your child can modify individual elements of furniture, thereby expanding its functionality. For example, roll away a couple of bedside tables or install a compact sofa not only under the bed, but also at the other end of the room.

It is advisable if the loft bed for a teenager is equipped with a full-fledged sports corner.

The girl will need enough free space to store not only clothes, but also little things dear to her heart: handbags, straps, jewelry and other accessories.

Allow your child to independently choose the shape, color scheme and design of their area.

It should not only be functional, but also stylish and appropriate for his age. Your tips should be very tactful - after all, at this time the child is already forming his own taste preferences.

For adults

The differences between adult and children's loft furniture are only in size and finish. Single- or double-bed designs for adults are larger in size, more durable and equipped with a reinforced frame.

In their lower part, as usual, there is a work area or a folding sofa for daytime relaxation. Cabinets or shelving, just as in the case of children's furniture, are equipped at the ends. Stairs can be positioned strictly vertically or made in the form of a combination of drawers, cabinets or podiums.

The sizes of beds for adults can vary from standard 140x200 to one-and-a-half or even double. By height they are divided into low (up to 140), medium (up to 160) and high (up to 200 cm) modifications.

Models with a sofa on the lower tier are very comfortable.

You can relax on it in your free minute during the day. In a studio apartment, this furniture, despite its overall dimensions, can serve as a small living area for receiving guests. If necessary, a coffee table can easily be moved to the sofa. By purchasing a model with a retractable table, you can also create a very comfortable workplace here.

You can install a product with a built-in sofa in your office. Especially for bedrooms, loft beds with a double bed are produced. For such a room, it is wiser to purchase a model with built-in wardrobes or a wardrobe.

It is often equipped with additional bedside tables and drawers, which can easily accommodate not only bed linen, but also clothes. There are models equipped with a cradle for a newborn.

Review of models and manufacturers

You can purchase a ready-made bed, have it made to order, or even make it yourself. You will select the appropriate option by studying the characteristics of individual models and the features of materials. The price of furniture complexes depends on the manufacturer, the quality of raw materials and assembly features.

Characteristics of the “Baby” loft bed model

This model is suitable for small rooms. The compact loft bed “Baby” has a height of 89 cm. At the same time, it contains many useful functions. In addition to functionality, the product also has excellent decorative qualities.

Here is the bed equipment:

three large drawers for clothes in a retractable ladder;
a roll-out table with drawers for writing instruments and two shelves on the doors;
There is also a spacious toy box located under the bed.

The ladder can be easily moved by a child. At the same time, it is very stable and does not move to the side. The complex is designed for several tasks: a play and work area, a sleeping area and a storage compartment. This option is suitable for children 3-6 years old, as it has a low sleeping position and is equipped with safety sides. There are models with a height of up to 1.3 meters from the floor. They can be purchased for children under 12 years of age.

Compact design with drawers and cabinet

Related article:

Soft floor for a children's room. What are the positive aspects, features and types of flooring? How to choose, lay and care for it correctly? Read about this and much more in the review.

What are the features of the “Fairy Tale” loft bed?

The “Fairy Tale” children's loft bed model is also popular. It includes a bed measuring 80*160, a ladder, a roll-out drawer and a spacious compartment. The height of the top side is approximately 35 cm. All corners are rounded, and the steps are made of solid wood. The set also includes a mattress made of holofiber and latex coconut.

This furniture set is produced in St. Petersburg. Manufacturers offer several models in the series.

Functional model "Fairy Tale"

A model of the “Legend 3” loft bed is made from laminated chipboard. The maximum permissible load on a sleeping place is approximately 80 kg. For safety, special sides and shockproof edging are installed on the structure. The steps are made of solid pine. The sleeping area is 1800*800 m. The kit includes a corner ladder, a bed and a table. The complex is assembled on both the left and right sides. There is another type of loft bed model “Legend 2”. It is suitable for children from three years old. The size of the bed is 800*1600. The niche under the bed is used as a play area. There is a round window in the sidebar. The furniture is made of chipboard. Shockproof edging is installed on the sides. You can choose two options for stairs: a straight one with wooden steps and a corner one in the form of a chest of drawers or a cabinet with doors. In addition to the loft bed, you can purchase a table, shelves, chest of drawers, shelving and other items. The set can be purchased in a different color palette.

There is another type of loft bed model “Legend 2”. It is suitable for children from three years old. The size of the bed is 800*1600. The niche under the bed is used as a play area. There is a round window in the sidebar. The furniture is made of chipboard. Shockproof edging is installed on the sides. You can choose two options for stairs: a straight one with wooden steps and a corner one in the form of a chest of drawers or a cabinet with doors. In addition to the loft bed, you can purchase a table, shelves, chest of drawers, shelving and other items. The set can be purchased in a different color palette.

The Astra 7 loft bed includes a full-fledged sleeping area and a work area. A convenient staircase with metal steps is provided for access to the upper tier. At the base of the stairs there is a box for children's accessories. The work area has a convenient shelf for books, a table and a place for a computer. To the left of the table there is a spacious and convenient cabinet, and the material used is laminated chipboard. The sleeping area occupies 80*195 cm. The wardrobe holds 3 shelves and a clothes rail. Assembly is done on both sides.

Advantages of the Astra loft bed

A spacious closet is considered a design advantage

The Astra 5 loft bed has the following advantages:

high sides;
comfortable corner wardrobe;
a large number of shelves;
compact staircase.

The disadvantages include sharp edges that are found on individual elements. There are also shallow drawers. Astra models are distinguished by well-thought-out ergonomics and original design. The models provide a load of 120 kg. The complex is universal and can be assembled on any side.

Nuances of the Teremok loft bed model

The Teremok 1 Grand loft bed model is not universal; the required side is determined by the stairs. Permissible load within 80 kg.

The package includes the following components:

sleeping place size 90*200 cm;
work area with a pull-out desk;
a table on wheels will not allow you to damage the floor covering;
chest of drawers with open shelves;
there is an orthopedic grill at the base of the bed;
sides 400 mm high.

An original solution for children's rooms

Characteristics of the Corsair loft bed

The Corsair designs are produced by the Scand Mebel factory. The manufacturer offers original models that are the embodiment of a child's dream of adventure. The thoughtful modular system is designed for both girls and boys.

Such a set can be purchased for growth, that is, it can be supplemented with different items: chests of drawers, a wardrobe or a chest with a seat. Only environmentally friendly materials are used for production. All parts are processed using modern equipment.

A custom model for adventure lovers

The following parts are included in the package:

wardrobe with hinged doors;
comfortable chest of drawers;
table with drawers;
open shelf; ladder with strong handrails.

There is a spacious sleeping area with high sides for sleeping. The top side provides excellent safety. This complex is made from laminated chipboard with German PVC edges. European-made fittings are used. The children's complex will add brightness.

Modern and functional sets include the Carlson mini loft bed model. This option is suitable for children from 5 years old. The set includes a bed, a linen closet, a ladder, a built-in countertop, a chrome stand and an additional pencil case. The manufacturer offers a varied range of color palettes.

The top side provides excellent safety. This complex is made from laminated chipboard with German PVC edges. European-made fittings are used. The children's complex will add brightness.

Comfortable set Carlson will save useful space

Arrangement of the attic bed "Sturo"

This model has a height of up to 270 cm. This option is not suitable for small children who may fall from the top tier. The mattress used must have a thickness of no more than 19 cm.

Loft bed "Sturo"

The models are made of pine and come in three colors: black and white stain, as well as unpainted wood. This product has the following advantages:

The furniture complex "Indigo" has a stylish design and original color scheme. In a small area you can install a sleeping area, a work and play area. The base of the bed is made of chipboard, and the frame material is made of chipboard. This model can be supplied with up to 17 different parts.

suitable for compact apartments;
the structure is equipped with a slatted wooden bottom;
below there is a small sofa, a floor lamp and a coffee table;
the ladder can be fixed on both the right and left sides.

[/list]

Advantages of the Indigo loft bed

The Indigo model will fit perfectly into a teenager's room

Characteristics of the loft bed M 85

A popular option is the M 85 loft bed. This model has many advantages. It is made from environmentally friendly materials and has all the necessary certificates. All sets are equipped with different types of mattresses, from simple to orthopedic. At the same time, the furniture is distinguished by modern design and functionality.

Modern and compact solution

Pros and cons of a loft bed

As we have already mentioned, this design helps save space and very often visually changes the configuration of the room. If you have a small and elongated living space, such a bed on the second tier creates a kind of two-story apartment.

And instead of a “well” room, you get a nice designer layout.

The disadvantages include the psychological discomfort of a person unprepared for such experiments, the feeling of a heavy bed base hanging over his head, and not always sufficient lighting and ventilation of the space above such an “attic.”

What to especially pay attention to when choosing

When planning to buy a loft bed, evaluate the overall layout of the room and the parameters of the future piece of furniture. You can take your children with you to the store - they will tell you what they like best.

Start your choice by inspecting the frame and sleeping area of the model. Everything must be durable and reliable. It is recommended to buy a product with a quality certificate - a self-respecting manufacturer always provides it.

Children love the “mystery” of the hidden corners of the structure, the opportunity to play and invent various situations similar to the fairy tales they read and the adventures they saw in cartoons and movies.

When the furniture has already been purchased, take care of the correct equipment of the sleeping place - choose a mattress with an orthopedic effect and a comfortable pillow.

Single and double loft beds

The bed on the second tier of the room can be either narrow and laconic in structure and design, or wide, massive, furnished almost like a separate room.

The first option is suitable for one person who views sleep as satisfying a physiological need. He climbed onto a modest bed, fell asleep, woke up, made the bed, and plunged into active everyday worries.
The second option is great for married couples, especially for those who are purchasing their first home in life, which is very modest in size, for example, like this modern-style studio. Such double beds can resemble a kind of mini-hotel: a soft wide mattress, shelves for books and various small items, excellent lighting, bright panels or paintings, and other decor that is pleasing to the eye.

Some couples even set up a small workplace on the second tier if they have to huddle in a very miniature apartment.

Combination with the interior

Multifunctional furniture allows you to intelligently zone the space of a room, using its entire area. Thanks to the variety of designs, such models fit organically into any interior style:

Loft. Designs made of metal or artificially aged wood are suitable. The lower tier of the loft-style bed is complemented by a sofa or workspace.
Modern. Loft beds made in this style are distinguished by asymmetrical shapes and smooth lines. They are made of wood decorated with carvings or metal (bronze, brass) with forged elements.
Minimalism. The models are distinguished by their strict lines, laconic forms, and simple design.
Country. Furniture design in this style suggests the presence of floral prints, carved pillars, a canopy or light tulle that covers the space under the bed from prying eyes. Most often, the models are made of natural wood, painted milky oak.
Provence. A bed made in a classic style and light colors is perfect for this room design. Models made from natural unpainted solid wood are very popular.

Modular kits look organically in high-tech and fusion styles. A white loft bed made of natural wood fits perfectly into a Scandinavian interior. A huge range of functional furniture allows you to choose the best option for a room of any size, purpose and design.

Loft Modern Minimalism Country Provence

Loft bed decor

You can decorate such a bed in thousands of ways. The main criterion is personal preferences and the desire to hide the sleeping area from prying eyes or, conversely, to demonstrate it in all its glory. Curtains, partitions, plasterboard structures - choose any option.

A separate topic is the variety of stairs that complement such loft beds. Stairs can be of different designs.

The vertical one is the most unsafe; even an adult can easily trip on it. Typically, such a ladder is installed at the end or side of the bed. This model is the most compact, which is why it is most popular.

If you decide to equip your loft bed with just such a ladder, we advise you to choose options with flat steps - they are more difficult to fall from than round ones.

Another option for a ladder for a loft bed is a model that is installed at an angle. This angle can be different, and the larger it is, the more space the staircase itself takes up. In this modification, it can be straight or radius (with a turn).
Pay attention to the drawer ladder, with flat steps in which drawers or cabinets are located. It's very convenient and safe.
There is also a so-called chest of drawers . Access to it can be either from the side or from the steps.
Ladder-rack is a model where instead of drawers in the steps there are shelves with side access.
A podium staircase is a more complex design: a podium is made at half the height of the bed, and a small ladder goes down to it from above, or, conversely, a ladder leads from the floor to the podium.

How to choose?

The selection of a high-quality and comfortable two-story bed should be approached with all responsibility. It is necessary to select a suitable model in accordance with the following criteria:

Functionality. A bed with a house should be easy to use. There shouldn't be any problems keeping it clean either.

All component modules (working, playing and sleeping areas) must be accessible and comfortable to use for the child.

Design

Before purchasing, you should pay attention to the design of the furniture. Modern bed houses are open and closed

The most practical are closed models, equipped with a roof over the headboard. Also, such products may contain strong walls and fences. Such thoughtful designs are not only convenient, but also safe.

If desired, lighting can be installed in closed houses.

Beds with open structures only imitate the roof and walls. The advantage of such specimens is their lightweight design, which does not clutter up the children's room.

Quality of the canvas. When choosing a bed-house, you need to pay attention to the fabric used for the interior equipment of the furniture and for finishing its soft parts. It is recommended to choose products with dense, elastic and smooth upholstery. Fabrics must be of high quality dyed. Experts recommend buying hypoallergenic options that do not cause static tension.

8 photos

Color. The color design of the bunk bed should match the overall design of the children's bedroom. Contrasting solutions will also look interesting. There can be a lot of options, but you should first of all rely on the wishes of your children. It is not recommended to buy overly bright models. Such colors will irritate and disturb the child’s psyche, which will certainly interfere with falling asleep quickly and healthy sleep.
Base. Regardless of the configuration of the bunk bed, experts recommend choosing models with sleeping berths that have orthopedic bases. Such components contain wooden slats that provide the anatomical structure of the bed. On such a base you can lay a high-quality orthopedic mattress that will take the shape of the little user’s body.
The main advantage of these parts is that during sleep and rest, the child's spine will be in the ideal correct position. This property plays an important role, since a growing organism must be provided with the most comfortable conditions both during sleep and while playing or reading books.

Bed colors

When choosing a loft bed for a child's room, parents should listen to the child's opinion. At the same time, it is worth setting children up for light, pure colors that visually expand the space: blue, peach, light green, green.

In the adult furniture segment, brown, gray, and beige colors hold the lead.

Shades of pink and lilac combined with white create airy, marshmallow interiors for young girls.

Functionality of children's two-level furniture

When a two-tier children's bed from IKEA from European manufacturers appeared in catalogs and for sale, domestic furniture companies enthusiastically picked up the idea. Although this was not something new - such furniture was known from films back in Soviet times.

Bunk bunks and uncomfortable beds for barracks and barracks did not inspire the creation of quality products for children. But recently, interesting developments by designers have appeared, various functional options have filled the catalogs:

transformable bed;
“attic” above the cabinets;
play area under the bed;
high bed with drawers;
study area with bed;
sports module with slide;
Ivan with a transformation mechanism for 2 beds;
children's furniture complex with storage systems.

If there is one child in the family, you should not help him buy a modern bed, which is located on the second level. For boys, parents often look for a sports corner with a bed, for girls - a dressing room. Many proposals are compact, have a work or play area under the bed, and the design encourages exciting games.

For two children of different sexes, we recommend a compartment bed that resembles part of a carriage. Children's personal space is clearly demarcated here and there is even local lighting. This is convenient when one child wants to sleep, and the other is still reading or viewing personal messages on the tablet.

There are also double beds, where one bed is designed for an adult. This is convenient in a one-room apartment for single-parent families. A small living space is optimized to the maximum, where the child willingly occupies the upper plane.

There are also teenage beds, where the lower one is smaller, and the upper “loft” for sleeping has a mattress length of up to 2 meters. These options are convenient when there are 2 children of different ages in the family. In this case, the baby is given the lower seat, and the teenager is given the large upper seat.

This is interesting: Varieties of double beds with soft headboards

Advice on choosing a loft bed

The choice of a children's sleeping complex depends on its functional load and the age of the children. Versions with sagging corners and thin crossbars are questionable in terms of safety.

It is better to secure a loose (overhanging) corner using one of the reliable methods:

support it with a metal rod from below;
duplicate with corners and metal crossbars;
strengthen with brackets to cabinet furniture standing on its end;
hang with a metal cable from a ceiling mount.

Pay attention to the innovations used in bunk beds for children.

Transformers.
Extendable work surfaces or sleeping area.
Blocks moving on wheels.
Folding and rotating tabletops.
Door and drawer closers (for soft return to their original position).
Removable dividers on shelves.
Sliding wardrobe doors (convenient for small rooms).

When choosing, also pay attention to the design of the multi-level loft bed, style and color.

There are simple versions with a recognizable plot:

the little princess's palace;
knight's castle;
captain's yacht;
car bed, etc.

Attention! No matter how beautiful and functional a children's bed is, safety should come first. If the child is weak, it will be difficult for him to use the ladder. But this is an excellent solution for active, healthy children and adolescents, mainly boys.

A bunk loft bed is a good option for a family with 2-3 children. Check to see if the manufacturer has options for color, materials, right- and left-hand corner versions. Most of the proposed samples from the catalog come in several versions.

Buying from the manufacturer with pick-up will cost less, but check with the managers for questions about the delivery and assembly of children's furniture.

Metal

Metal is the most durable and hypoallergenic material if properly sanded or chrome-plated. There are models with painting, they are tactilely warmer and more comfortable for handrails. But metal bunk beds have an impressive weight, so they gradually push through the soft floor covering with carpet and insulated linoleum.

Children's cabinet furniture (103 photos): modern options and features of use in the interior
Bed-Car: sizes and features of choice for children of different ages (109 photos)
Children's upholstered furniture: 104 photos of frame, frameless and transformable furniture

It is important to think about where the base of a children's bunk bed will rest. Factory-made metal beds are very durable, making them suitable for active and inquisitive children.

This is interesting: Lazurit beds

Design features of stairs

Loft beds are equipped with folding or stationary ladders. Rigidly fixed models are more suitable for a children's room. They are securely screwed to the base, safe, and allow you to climb up without much difficulty.

Manufacturers offer customers several types of stairs for bunk beds:

Vertical. The most budget option that does not take up much space. Of all the modifications, this type is the most dangerous, and therefore is not suitable for children's furniture.
With a podium. Outwardly it resembles a platform-podium located in the middle of the height of the structure. The plane can be used as a desk, the space under it can be used as a storage system. Suitable for children from 7 years old.
With steps-chest. Each stage of this design is a box in which you can store things, textbooks, and toys. Loft beds with a chest of drawers take up quite a lot of space, so they are not suitable for small rooms.
Attached. The mobile ladder is attached to the bed when necessary, the rest of the time it is stored in a niche under the berth. This design does not have a rigid attachment to the bed, so it is considered dangerous.
Inclined. A curved or straight structure, installed at an angle to the bed, in addition to its purpose, also serves a decorative function. However, such models take up additional room space.

Aluminum, duralumin, plastic or wood are used to make stairs. Metal is reliable, but is only suitable for large models; for children's beds, it is better to choose parts made from natural solid wood.

What materials is it made from?

In the manufacture of the models in question, the following is used:

Tree. The best option for a children's room. The design retains heat well, looks aesthetically pleasing, but is quite heavy. The material is environmentally friendly, safe for health, and does not cause allergies. Timber structures are particularly strong and durable.
Metal. The basis of the frame is an iron structure, which is coated with polymer. A metal loft bed is a classic option for a boy. It is durable and lightweight. A significant drawback is that steel is considered a rather cold material and is not very pleasant to touch. For this reason, combined ones consisting of iron and wood are preferred to all-metal structures.
MDF. The material is small chips compressed under high pressure and temperature. It is easy to process, so MDF models come in a wide variety of designs. A huge plus is the affordable cost.
Chipboard. A loft bed made of this material is inexpensive and lightweight. The models look organic in the interior, but are short-lived. In addition, chipboard may contain resins that are hazardous to health.
Plywood. The material is durable, affordable (cheaper than wood). You can purchase a product of any shape, because plywood bends well and is easy to process. During operation, no gaps or chips are formed.

Combined options are in high consumer demand. The basis of the frame is wood, and additional elements are made of MDF, fiberboard or chipboard.

Wood Metal MDF Chipboard

Plywood

Additional equipment

A loft bed is a structure that combines many elements. A mandatory part of all models is the frame. If desired, the following components can be added to it:

Tabletop. For small children, stationary modifications will be more convenient, while schoolchildren will be more comfortable studying with mobile ones.
The stairs. For your baby, you can order shelf steps that make it easy and safe to climb up.
Cabinet or rack. For additional elements there is a niche under the bed or table. Nightstands are also placed there.
Curtain. The child feels more comfortable when the play area is separated from the rest of the room.
Gorka. A wooden structure is placed near the bed to make it easier for the baby to get down.

Additional elements should not take up much space. The best options for small spaces are transformable models.

How to make a bed-house with your own hands?

Who better than parents should know that a child’s favorite pastime is playing in a house or barnyard. What construction option was not used in childhood: branches, newspapers, blankets, boxes. But... the children grew up and got the chance to make a good-quality and beautiful house-bed with their own hands for their child.

Before starting work, it is better to transfer your dream onto paper in the form of a sketch, thanks to which it will be easier to compare the parameters of a piece of furniture and a room, adjust them, and also adjust everything to the size of the mattress and bed linen.

In addition, a precisely drawn diagram of a children's bed-house will allow you to decide what the final result will be and will give you the opportunity to change the nuances before starting work, and not during the process.

Required tools and materials

Having decided on the sketch, we move on to preparing the necessary tools for making a house-bed. We’ll talk about the choice of material for making a bed house later, because, as a rule, wood or MDF is used in children’s furniture, but we’ll look into what tools will be needed during production.

So, the tools you will definitely need are:

knife;
hacksaw;
screwdriver;
drill and drill bits;
screwdriver;
roulette;
hammer;
miter box (template tool for cutting corners);
Sander;
jigsaw (if the bed model includes windows and other shaped elements);
hacksaw;
set of files;
vice;
a square and a simple pencil for marking;
ruler;
sandpaper;
set of self-tapping screws;
set of bolts;
panels;
slats;
self-tapping screws;
special glue for wood.

In addition to the above, you will definitely need to buy slats, a wooden beam with a cross-section of 40 x 40 mm or 45 x 45 mm, metal furniture corners, guides (for models with retractable elements).

We take measurements and drawings of the bed-house

Draw on the drawing, in accordance with the measurements taken, the number of parts and elements that will make up the bed-house. You also need to write down the dimensions of each part that will make up the bed, and describe the method of fastening.

Example: drawings of a single and bunk house bed

Choosing materials for a children's bed

The choice of material for a children's bed-house depends on your financial capabilities and the shape of the future piece of furniture. For the frame of the bed you will definitely need a beam with a cross section of 5*5 centimeters. The amount of materials directly depends on the dimensions and design of the future house.

If you want to take the path of saving, then you can make a bed-house by symbolically depicting a roof made of slats on the wall adjacent to the crib. In this case, the minimum material will be needed, in contrast to a more global structure with a sleeping place or even two, walls, stairs and a roof.

But even in the latter case, you can save money by using plywood boards for the walls and roof of the house-bed, and besides, plywood is an extremely malleable furniture material from which any part can be cut. Experienced furniture carpenters recommend choosing birch plywood with a thickness of 0.7 or 1.3 cm.

Another excellent material for making a crib-house is plasterboard, from which you can make any part of future furniture. But, of course, the undisputed favorite in all respects is natural wood, the strength and environmental friendliness of which no one doubts.

The base of such a bed can withstand a load of up to 120 kilograms, which is important, given the love of children for jumping on the bed

Dimensions

Standard loft bed frames are distinguished by size and are:

Low. The height ranges from 70 to 160 cm, and the width is about 80 cm. Such models are called semi-loft beds, as they are more similar to standard types of children's beds and are suitable for children from 4 years old.
Average. The height is about 160-180 cm.
Tall. Models height 180 x 200 cm.

Basically, the sleeping area of a loft bed does not exceed 90 cm in width, but a model of any size and configuration can be designed to order. The height of a loft bed generally depends on the dimensions of the room, but the optimal distance from the ceiling to the bed is considered to be 70 cm.

Low models are more suitable for rooms with low ceilings, but to save space it is better to give preference to high loft beds, as the lower tier becomes more accessible and functional.

The width of a single bed is standard, but for adults, for example, a married couple, double models are also available.

When purchasing a loft bed for children, it is better to choose designs for growth in order to extend the life of the product.

Choice of colors and themes

As for the color design and theme of furniture for a children's room, the flight of imagination of designers is almost limitless. The choice of colors often depends on the child’s preferences, as well as his age. For example, younger children buy furniture in delicate colors:

Caramel pink;
Light blue;
Pesochny;
Light green.

Such tones have a beneficial effect on the emotional state of the child and have a calming effect. For older girls, you can choose a loft bed in brighter colors. Interior items in scarlet, pink, lemon, and raspberry colors look impressive. Discreet and calm shades are suitable for older children: beige, olive, light pink, peach, blue. To prevent the room from seeming boring, you can add bright accents to the interior. These could be red pillows, a purple chair. The room will look interesting and original.

The most popular furniture themes for a girl’s room:

Marine - white, red and blue design of a children's room is suitable not only for a boy, but also for a girl. Decorative elements for an attic bed can be in the form of a wave, an anchor;
Fairy tales, cartoons - for a girl, an attic bed in the shape of a castle or a carriage from a popular cartoon will be a real gift. Furniture with carved decorative elements will become the highlight of the entire room. Loft beds made in the theme of cartoon characters are also popular;
Natural motifs - they are often found in the design of furniture for girls. Flowers, trees, and animals can be depicted on the facades.

Original beds in the shape of carriages, castles, rockets, towers, due to their unusual design, can be quite expensive. If financial resources are limited, you can purchase an inexpensive loft bed in a neutral color and decorate the facades with stickers and drawings that reflect the girl’s interests.

In addition, while preparing children for school, you can place stickers and images of numbers, letters, and geometric shapes on the walls of furniture. Decorative elements are ready-made and can be purchased at the store. You can also make them yourself from plastic, fabric, paper.

Assembly instructions

Assembling a loft bed according to the instructions is quite simple, especially if it is furniture from Ikea or Hoff. It is these manufacturers who describe step by step all the stages of assembling the structure, along with images. The task is greatly simplified by the fact that in many furniture stores, in addition to delivery, there is assembly of the product at home, because there are complex structures that require installation into the wall. This applies to high loft beds.

Low and small models can be delivered assembled if room doorways allow this.

If the owner decides to assemble a loft bed on his own, then he should start by assessing the room. First, you need to decide from a planning point of view where the structure will be installed. It all depends on the types of fastening of the models and their configuration.

Small models of children's beds require virtually no installation.

If it is a loft bed with three support points, then it is mounted between two walls or in the corner of the room. There are designs with a suspended mounting system; they are installed under the ceiling on special beams.

When installing the stairs, the dimensions of the users are taken into account; access to the lifting mechanism should be free and not restrict movements when descending; this will increase the safety of the structure, which is especially important for children's beds.

All connections must be made at right angles and secured with a supporting element. Corner modules are installed on the lower parts of the structure to increase the supporting characteristics of the bed.

Features and Benefits

There are a number of advantages that distinguish this option from others:

saving space. Frees up space for games. And it’s not just about a small-sized nursery, since even in a spacious room there should be a lot of free space for play activities;
organization of space. This model, as a rule, is equipped with drawers, shelves, and sports equipment;
is perceived positively by children. Girls and boys really like this house-shaped bed;
educational gaming complex. The child will explore his new play bed, decorated as a house, and come up with many new games. Gradually, this will turn into gymnastic exercises and even the basics of rock climbing; coordination of movements will develop, as well as imaginative thinking. There is no doubt that the bed will turn into the most favorite place in the apartment, the child will have a separate space that perhaps did not exist before. The kid will want to put things in order in his house, decorate it in accordance with his taste and preferences;
transformation. The house bed can transform and grow just like a child, you just need to add modules to change the size of the bed, so it will also suit a teenager.

At first glance, two-level bed-houses seem oversized, but this is far from the case. On the contrary, they save space and can even increase the usable area of a child’s room. Thanks to their unusual design, such models are slightly higher than their counterparts that are not equipped with a house.

The designers of the bed-houses have thought through all the nuances. For their production, environmentally friendly materials are used, there are no traumatic sharp corners, there is a large margin of safety for all parts of the structure, and elements for fastening to the wall are also provided.

Photo gallery

A loft bed will be the optimal solution if there is a lack of living space. If necessary, you can convert the space under the attic, freeing up space or changing furniture.

Thanks to the variety of models, this bed will find its application in any interior.

What is it and why is it popular

A loft bed is a multifunctional structure with a sleeping place, under which there is a wardrobe or space for other furniture. If necessary, the model is equipped with an additional sleeping area. The design has a number of advantages:

Saves space as it is installed near one wall.
Functionality. The empty space under the bed is used as a “warehouse” for things, a place to study, play or sleep.
There is no need to match the loft bed to other pieces of furniture. A cabinet with a work area and a table are included in most models.
Durability. Multifunctional beds are made of high-strength materials.
Original design. A wide variety of models allows you to choose a bed to suit any style of room.

This furniture is not suitable for children under three years of age. A low loft bed is the optimal solution for preschoolers.

A significant drawback for many buyers is the cost of the products, which is not affordable for everyone. In addition, the design assumes high ceilings. It is necessary to familiarize yourself with the pros and cons of a loft bed in advance, since the sleeping module is purchased for a long time. The child should like it, be comfortable, safe, and functional.

Types of furniture complexes by material of manufacture

In the production of sleeping structures, materials are used that are characterized by high strength characteristics, environmentally friendly and reliable in operation. Ready-made furniture sets are presented in the following categories:

Wooden loft bed

The products are distinguished by their impeccable performance properties and environmental friendliness of the natural base. A wooden loft bed is made from an array of valuable species - for example, beech, oak. The material is resistant to external factors, withstands intensive use, the surface is pleasant to the touch.

A loft bed made of solid wood looks presentable, can decorate even the most luxurious interiors, and emphasizes the special status of the home. The only drawback of solid wood furniture is the high cost of production. If you buy a loft bed made of pine, you can save your budget and enjoy the fresh aroma of pine needles for a long time.

Sleeping complexes made of chipboard

Products based on particleboard are not highly resistant to external influences. To eliminate the risk of purchasing low-quality goods, choose among the offers of trusted furniture manufacturers with an impeccable reputation in a competitive environment. Domestic brands with many years of experience in the specialized market offer high-quality loft beds made of chipboard of various modifications at affordable prices. Before purchasing furniture made from chipboard, be sure to ensure that it has an environmental safety certificate.

Metal loft bed

The design is strong and durable, able to withstand significant loads. When choosing an ergonomic solution in the form of a double loft bed, it is worth considering this product option.

A loft bed made of metal with elements of artistic forging looks especially presentable. Children's metal modifications are most often intended for the generation of teenagers with irrepressible energy. If your child prefers a minimalist style in the interior, you should choose among laconic steel solutions. You should not install such a model for fidgets of the youngest age, restless preschoolers and slightly older children, since metal structures are traumatic, and the surface is cold to the touch.

Disadvantages of using a high bed

The main disadvantage of the model is the possibility of injury due to a fall from a certain height during careless operation. There are no guarantees of safety, even if the sleeping place is equipped with sides and the stairs are made according to the requirements of the standards. In addition, the following disadvantages are noted:

Special requirements for the location. High construction is not recommended for use in rooms with low ceilings. Only models of medium height or low are suitable here;
Discomfort due to stuffiness. Heated air currents circulate upstairs, making it difficult to breathe during the heating season, since it is not always possible to ventilate the room;
Psychological factor. Users with unstable mental health may experience fear of heights or claustrophobia due to limited space under the ceiling;
Difficulties in care. Making your bed takes some effort. The higher the bed, the more difficult it is to make it.

It is also necessary to install additional light sources to ensure full illumination of the functional space under the sleeping area.

The high efficiency of a loft bed in organizing space eliminates all the disadvantages of using this furniture. It is for this reason that most owners of compact apartments and spacious country houses prefer ready-made ergonomic solutions or order the production of exclusive models.