How to clean the matte surface of a kitchen unit

How to properly wash kitchen facades: 8 tips for perfect cleanliness

During operation, the surfaces of kitchen units gradually become dirty, and it becomes very difficult to clean them.
In order to clean a kitchen set made from natural wood, chipboard or MDF, you need to know a number of rules. One sure rule is that there is no need to allow heavy contamination; you need to wash all surfaces after each cooking process. Then there will be no large layers of dirt, and they can be washed off without much effort, using soda and laundry soap.

Due to the fact that surfaces are very easily damaged, the following materials should be used:

1. Microfiber cloths and cloths.
2. Napkins made of flannel and cloth.
3. Soft sponges.

It is important that during the cleaning process, even for heavily soiled areas, you should not use hard metal brushes!

When choosing a cleaning product, you should not buy substances that contain large abrasive particles, as scratches and damage to the surface will appear during the cleaning process.

Therefore, it is necessary to use gels and products that contain substances that break down fats to clean surfaces. If the detergent consists of ammonia and acids, stains may remain on the cleaned facades.

Since many detergents have a detrimental effect on the surfaces of facades, you can use products that have been proven over the years to clean any dirt.

1. To clean wooden surfaces, you need to use regular vegetable oil, which you need to wipe away dirt. Leave for a few minutes, when the fat collects in lumps, simply wipe with a cloth. This method may not help immediately, if the surface is very dirty, then you need to repeat this procedure several times.
2. For all surfaces, you can use baking powder diluted with water to medium thickness; this mixture must be applied to the dirt, then wait 30 minutes and rinse with warm water.
3. To clean a glossy surface, dilute apple cider vinegar with water and apply to dirt. Wipe with a soft cloth; after this cleaning, in addition to removing dirt, the surface will become shiny.
4. Grease stains can be wetted with alcohol or vodka and wait a while. If you are unable to cleanse, apply for 30 minutes and rinse with water and essential oil. Please note that if you clean wooden surfaces, they will smell nice and all bacteria will be destroyed.
5. To clean fat, add 2 drops of detergent and 15 g of citric acid to 1 liter of water. Now apply this product to the dirt for 30 minutes, then wipe it dry.
6. Take a glass of vodka and vinegar, and half a spoon of orange oil, mix all the ingredients, pour into a spray bottle and spray the dirty areas. Wait 20 minutes and rinse with water, rub until shiny. It is important that this method is suitable for tiled surfaces and ceramic products, and it can also be used to wash all stoves and any surfaces.
7. Cut the lemon and wipe all the dirt with it, then after 10 minutes wipe with a damp cloth so that there are no streaks, rub with a paper napkin.

• Marble and granite countertops should only be washed using folk remedies; detergents damage their surface. After cleaning, facades and all fittings should always be wiped dry.
• To clean laminated chipboard, you can use a ceramic scraper.
• Before you start cleaning vertical surfaces, you need to lay paper sheets on the floor. To ensure that the furniture does not have to be cleaned frequently, it is necessary to apply polish after cleaning.

Proper and timely cleaning will help extend the life of kitchen utensils and furniture. At the same time, the kitchen will always sparkle with cleanliness and bring joy to the hostess.

After all, the kitchen is a place for preparing food, so sometimes drops of liquid fall on the surface of the kitchen facade. Today we will help you figure out how and with what to properly clean the kitchen so as not to damage it.

How and with what to wash glossy and matte kitchens made of plastic, MDF, wood

First, let’s clarify the list of products that are strictly not recommended for cleaning kitchens:

1) Products with alcohol, except ethyl: methyl, propyl and others. Ethyl concentrate is also prohibited (a weak solution is allowed and only for plastic facades). 2) Abrasive materials: scrapers, knives, spatulas, brushes, soda, etc. 3) Steam cleaner (suitable only for kitchens made of natural wood). 4) Chlorine, sodium, alkali and acid-containing cleaning products. 5) Toothpaste, vinegar, vegetable oil, soda, and other pseudo-drugs.

And so, since there are different types of kitchen facades, let’s look at this for each type:

Paper towels

The best solution for absolutely any surface is a clean paper towel. It cannot harm any objects, with extremely rare exceptions.

How to use:

• Prepare one towel.
• Moisten it with warm water.
• Wipe every contaminated area.

If you need to remove a fresh stain of grease or other dirt, then this is an ideal option that will instantly solve the problem.

Soap, soda

You can remove grease from most surfaces yourself using baking soda and soap. This is an ideal option for household appliances and dishes.

How to clean:

• Rub the soap into small pieces and add a small amount of water.
• Blot the sponge and wipe off all the dirt.
• Pour baking soda onto a sponge and wipe the dirty surface.
• After 20 minutes, rinse with a soft, damp cloth.

This product cannot be used when cleaning varnish or glossy coatings, as they can be scratched by soda granules.

Hydrogen peroxide

Regular hydrogen peroxide, which is available in every pharmacy, will help remove grease, soot and other contaminants.

How to use:

• Mix a small amount of peroxide with baking soda to form a thick mixture similar to sour cream.
• Apply it to all areas that need to be washed for half an hour.
• Use a brush to remove everything that has “moved away” from the surface.
• Wipe with a damp cloth.

This method, like the previous one, is not applicable for varnish or glossy coatings due to the risk of damaging the top layer of the material.

Melamine sponge

A melamine sponge will help clean all surfaces without streaks. It is quite dangerous for some surfaces, because it is a rather hard material. Nevertheless, it is extremely effective.

What to do:

• Moisten a sponge with a small amount of water and squeeze lightly.
• Wipe off all traces of fat.
• Remove grains with a soft cloth.

In cases where the stains are very small, it is best to cut off a corresponding piece from the sponge and use it to clean off the dirt.

Steam cleaners

This method is applicable to most surfaces. The only exceptions are those that cannot be wet. Steam cleaners not only allow you to easily clean any type of kitchen dirt, but also disinfect the entire kitchen, making it as safe as possible for humans.

How to use:

• Start the device.
• Apply steam to problem areas one by one, while simultaneously cleaning them with a soft cloth.

After this, you can additionally apply any of the above methods. This will improve efficiency.

I also want to show you a simple method that I have been using for a very long time and I really like it and easily copes with its task.

How and with what to wash a kitchen made of natural wood

A kitchen made of natural wood needs to be washed in several stages: 1) Wipe the surface of the kitchen facade with a damp soft sponge and a weak soap solution (ordinary soap) and remove greasy stains. You can use a steam cleaner (not acceptable for MDF facades!). 2) Wipe again with a damp soft sponge, removing soap stains from the surface. 3) Use a dry microfiber cloth to wipe the surface dry. 4) To protect the surface, you can apply the time-tested furniture wax polish Pronto. 5) It is not recommended to use chemicals such as Mister Muscle and others when cleaning, as the composition may vary and damage the varnish surface, or give the kitchen an odor. But, if you know a proven cleaning product, always try it on the inside of the kitchen façade first.

What color is the most practical for the kitchen?

– White in the kitchen is the most practical. Fingerprints and water drops are not visible on it. If, for example, you use acrylic plastic as a material, it will not fade or turn yellow over time, even if the kitchen is located on the sunny side.

Interesting materials:

How to copy a VIPnet certificate? How to copy a screenshot on Android? How to copy a chest in Minecraft? How to copy bookmarks in Google Chrome? How to Craft a Wooden Pressure Plate? How to Craft Netherite Scrap? How to Craft Mystery Stew? How to Craft Golden Apples? How to fasten stones together? How to hide an album on Facebook?

Rating of products for removing grease from kitchen furniture

The most common materials from which kitchen furniture is made are chipboard, MDF, plastic and natural wood. Each of them requires a special approach when cleaning.

MDF and chipboard

When cleaning a set of MDF or chipboard, choose gentle cleaning products. If you use aggressive abrasives, the delicate surface may be scratched.

The surfaces in question can be cleaned with substances that the housewife always has:

• glass cleaning composition;
• dishwashing gel;
• liquid soap.

If the above remedies do not help, you can use stronger household chemicals. Before using the cleaner, you should familiarize yourself with its composition.

You cannot clean furniture made of chipboard and MDF with the following types of substances:

• liquids containing alcohol;
• abrasive powders;
• concentrated solvents;
• solutions containing a lot of alkalis and acids.

The most popular cleaning products for cabinets made of MDF and chipboard are:

After removing grease from a chipboard or MDF cabinet, rinse it with clean water and wipe it dry. This will prevent streaks and maintain gloss.

Advice ! After cleaning veneered MDF, you can treat the surface with a special polish to make it shine.

Natural wood

When cleaning natural wood, be as careful as possible. The material is easy to spoil, and a set made of valuable wood is expensive.

Important ! Use only cleaning products designed specifically for natural wood.

After cleaning, it is advisable to treat the furniture with wax or polish. This way the headset will be protected from dust and soot settling.

Mistakes in cleaning glossy furniture

When moisture gets under PVC-coated MDF or chipboard, the top film begins to peel off / Photo: roomak.com.ua

Water negatively affects the gloss. When moisture gets under PVC-coated MDF or chipboard, the top film begins to peel off. That is why you should not wet the surface during cleaning. After wiping the top of the furniture, go over it with a dry cloth. Most dirt accumulates on the bottom drawers. In this case, we recommend making the upper facades from gloss, and the lower ones from more unpretentious materials.

If dirt or grease has become old, do not try to remove it with brushes with hard bristles / Photo: ae01.alicdn.com

If dirt or grease has become old, do not try to remove it with hard-bristled brushes. Yes, they effectively remove dirt, but at the same time scratch the surface. And damage on a shiny surface is very noticeable. If you cannot do without a brush, choose a product with the softest bristles or an old toothbrush of similar hardness.

Abrasive particles are the worst enemy of a glossy surface. Household chemicals act aggressively, and the smallest ingredients scratch furniture. As a result, there will be recesses on the headset, into which dirt will become even more clogged. Not only will the set look worse, but it will also be more difficult to clean. Also make sure that among the ingredients of household chemicals there are no alcohol compounds, chlorine, acetone and other aggressive substances.

How I found my ideal hair growth product

Hello dear! I want to share with you my solution to the sensitive problem of hair loss . The problems are very serious, at least for me. I would never have thought that this misfortune would touch me, especially at the age of 29 (read more...)

How and with what to wash a kitchen made of film MDF

1) Wipe the surface of the kitchen facade with a damp soft sponge and a weak soap solution (ordinary soap) and remove greasy stains. Steam cleaner is not acceptable for MDF facades! You can also use a soft sponge with cleaning products containing a weak solution of alcohol, but always try on the inside of the kitchen façade first. 2) Wipe again with a damp soft sponge, removing soap stains from the surface. 3) Use a dry microfiber cloth to wipe the surface dry. 4) To protect the surface, you can apply the time-tested furniture wax polish Pronto. 5) It is not recommended to use chemicals such as Mister Muscle and others when cleaning, as the composition may vary and damage the surface or give the kitchen an odor.

Glossy

• treat the dirt with hot water, which will make the dried fat soft;
• mix 100 g of soda and 100 g of salt, add a little water to the mixture to obtain a porridge-like composition;
• apply the resulting paste to the stains and wait 20 minutes;
• wash off the dirt and paste with water, then wipe the surface of the cabinet with a dry cloth.

Rubbing isopropyl alcohol can be purchased at outlets that sell printer supplies, companies that sell fiber optics, and specialty online stores. You should not experiment with other types of alcohol.

Subtleties of caring for MDF

Of course, this material will not last forever, but at least you can maintain its appearance throughout its entire service life. It is enough just to follow the basic rules of care and cleaning, depending on the type of surface finish.

Veneered coating

Due to the gluing of valuable wood veneer, such a set cannot be distinguished externally from its solid wood counterpart. The veneer, of course, is protected by a layer of varnish, but since it is glued to MDF, this imposes certain restrictions on the use of furniture, for example, it cannot be placed near heating devices.

Veneered MDF looks great, but puts forward a number of requirements for cleaning products

When it comes to the question of how to wash a kitchen set made of MDF with veneer, there are not many options. It is best to limit yourself to just a weak soap solution and avoid severe contamination of the surface.

Cleaning the veneer surface should be done in the following order:

• first wipe the surface with a damp cloth, this will remove particles of dust and dirt;
• then you can use a suitable product, for example, for cleaning windows (if you don’t have a special composition for MDF on hand). The scheme is the same - apply it to a rag and gently wipe the set. The direction of movement is strictly along the veneer fibers, this will reduce the risk of scratches to a minimum.
• To ensure that no streaks remain on the varnished surface, wipe it dry with a clean cloth.

When choosing a polish, you need to pay attention to its composition. For example, silicone will provide shine and resistance to moisture, wax will prevent dust from settling, and oil-based products will help hide minor scratches.

The finishing touch after cleaning veneered MDF

Film-coated MDF

In the question of how to clean a kitchen set made of MDF with a film coating, in addition to the products already listed, you should also discard those that are designed to work with natural wood. Any polishes, care products containing oils or wax will only worsen the appearance of the film and may even cause a local change in the shade of the film and its swelling.

The first rule of cleanliness

To avoid any questions about how to clean the set, you need to maintain cleanliness regularly. Of course, this can be difficult, especially when caring for modular or white furniture. But if you do not regularly wash the accumulated grease and dust, they turn into plaque, which cannot be removed with gentle means. The frequency of cleaning depends on how much and what exactly the housewife prepares. Therefore, deadlines will always be individual.

It is important to clean hard to reach areas. You can do this with an old toothbrush. This is the first assistant in caring for your kitchen set, especially when it comes to modular or white furniture.

Wiping furniture

If you are afraid that the chosen remedy is not the most gentle, try it first in a place where the damage will not be noticeable. This is equivalent to an allergy test - you need to apply a detergent composition to the surface and see the reaction. Moreover, you need to carefully choose chemistry for facades if they are covered with gloss (it is easy to scratch), thin film with a pattern, or paint. Dense matte lamination often withstands a lot of cleaning, only after years may chips and scratches appear on it.

How and with what to clean a plastic kitchen

1) Wipe the surface of the kitchen facade with a damp soft sponge and a weak soap solution (ordinary soap) and remove greasy stains. You can also use a soft sponge with cleaning products containing a weak solution of alcohol, but always try on the inside of the kitchen façade first. 2) Wipe again with a damp soft sponge, removing soap stains from the surface. 3) Use a dry microfiber cloth to wipe the surface dry. 4) You can use weak alcohol-based detergents such as Mister Muscle, lemon. (chlorine, sodium and acid containing products are prohibited)

How and with what to wash a glossy kitchen

You can add shine to furniture using several materials: special varnish, paint, PVC film, acrylic coating. Despite this, the cleaning process comes down to the following steps: 1) Wipe the surface of the kitchen facade with a damp soft sponge and a weak soap solution (ordinary soap) and remove greasy stains. 2) Wipe again with a damp soft sponge, removing soap stains from the surface. 3) Use a dry microfiber cloth to wipe the surface dry. 4) Any detergents are strictly not recommended for use! 5) You can use a special furniture polish called Pronto.

Matte facades for kitchen units are back in fashion. Not so long ago, they were inferior in popularity to glossy ones - they looked fresh and unusual, visually enlarged the space and were considered easy to care for.

However, now elegant matte furniture is back in trend. Let's figure out what the advantages of such kitchens are, what rooms they are suitable for and how to care for them.

How to wash PVC film?

Over time, the adhesive applied to the film destroys the outer layer of PVC. Usually the film is easily removed, and the surface is cleaned with a soap solution or weakly concentrated dishwashing detergent. Tape marks are removed with an eraser. This is labor-intensive, but guarantees complete absence of traces.

Interesting materials:

How long can you keep broccoli in the refrigerator? How long can you store boiled cauliflower? How long can you inject B12? How much buckwheat can you eat? How many walnuts can be transported across the border to Poland? How long can you take arginine? How long can you drink alcohol on a plane? How much currency can you bring across the border? How much alcohol can you take on a plane? How much currency can you bring across the border?

How to choose a set for interior design

When choosing a headset, you should pay attention to the material and design of the furniture. When choosing a headset, various factors are taken into account:

• room size;
• lighting intensity;
• interior style;
• Features of the operation of the kitchen set.

For a kitchen in a classic style, it is better to choose matte facades, and for a modern style, glossy ones. The gloss will provide a shiny effect, thanks to which it will be possible to create an interior, as if from a photo from the covers of magazines.

When choosing a set, the operating features of the kitchen furniture are also taken into account. If the housewife wants to create a room for herself, then she should choose acrylic, which has better performance qualities than other materials.

The general style of the room should also be taken into account. In order for the glossy set to look organic, the tabletop and apron must be made the same in texture.

A glossy set, if the room is already decorated, can oversaturate it.

Matte kitchens: what are they made of?

The modern choice of materials for kitchen sets is extremely wide. We invite you to use our list to make the best choice.

The most affordable option is a matte kitchen made from chipboard . To give it a matte effect, it is covered with a special film or plastic panels are installed.

Such furniture may look good, but the matte finish is not durable: most often, scratches and chips appear in the first months of use. An exception is furniture made of chipboard with aluminum profiles.

is much stronger . As in the previous case, dullness is given by various types of external finishing. However, in addition to the options already listed, you can also find more durable skins. An excellent choice is a set made of MDF, covered with natural veneer. The elegant surface is perfect for classic interiors.

The most expensive option for a matte kitchen is made from solid wood . Durable, environmentally friendly, elegant headsets will serve you for many years.

However, a lot depends not only on the base of the headset, but also on the finishing. In addition to plastic and veneer, the following types are used.

Film facades, already mentioned above, are quite fragile and very quickly lose their appearance. Nowadays, headsets with acrylic film have appeared on sale - they will last up to 7 years if you follow the operating conditions.

Features of matte facades

Matte kitchens are offered in a wide price range, which primarily depends on the material used:

1. In the economy segment, matte chipboard facades are very popular. Of course, they cannot boast of durability and are subject to mechanical damage, but the low price allows you to periodically replace such a kitchen, satisfying the normal desire for variety.
2. A practical economical option is a kitchen made of plastic. Plastic is a more durable material than chipboard, which is easy to care for. The catalog of the furniture factory "Kitchens for People" presents several models of plastic kitchens at affordable prices: for example, Season and Violet kitchens, as well as dozens of other sets, the colors of which can be changed.
3. Kitchens made of MDF - an elegant surface made of natural veneer is perfect for a classic interior. The catalog in this segment includes kitchens from Budbin, Paola, Verona, etc.
4. Expensive kitchens are made from solid wood. Beautiful and environmentally friendly headsets are incredibly practical, reliable and durable.

Matte kitchen: pros and cons

Fans of matte and glossy kitchens can argue for hours, giving various arguments for or against the chosen type of set. We offer you a visual table that includes all the advantages and disadvantages of matte kitchen furniture.

We recommend weighing all the advantages and disadvantages before making your final choice. In addition, it will not hurt to read our article on glossy kitchens - we are sure that with complete information on both options it will be easier to decide!

How to clean grease from kitchen utensils at home

Keeping the kitchen clean is one of the main tasks of housewives, so the question of how to clean grease from kitchen furniture at home is always relevant. Home and professional remedies will help clean surfaces and restore their freshness. However, in order not to damage the headset, it is important to know what material it is made of and take into account the features of caring for it.

The article contains useful tips and effective methods that will help remove grease from glossy, plastic and wooden furniture in the kitchen.

Color palette

There is an opinion that the color range of matte kitchen surfaces is smaller than glossy ones. In fact, this is not the case - it all depends on the coating material. When choosing a shade for a specific kitchen set, you should consider:

• room dimensions,
• location and number of windows,
• general stylistic concept.

1. For example, for a small kitchen you should not choose dark matte surfaces. There is no need to use variegated colors - a small room will look overloaded. The modern fashion trend is delicate white and creamy shades. An elegant kitchen set in a pearl or milky tone will look good.
2. For more spacious rooms, it is permissible to adopt combined solutions: for example, a combination of black and white. For example, you can decorate the bottom drawers and cabinets in black colors, and place white cabinets on top. Contrasting elements look fashionable and are universally suitable for many styles.
3. For classic interiors, as well as rustic styles, wood shades - light and dark - are widely used. It can be beige, coffee, chocolate, wenge, oak, brown. In a matte finish, such facades look ideal.
4. Matte color solutions look good - blue, blue, lilac, pink, lavender, pistachio, yellow shades. This palette, characterized by muted light reflection, is an excellent option for decorating a kitchen in the Provence style. This direction needs a slightly faded background. Glossy and colorful splashes are necessary to create a romantic atmosphere of the French province.
5. The spacious kitchen can be furnished with black matte furniture. Thanks to such an elite environment, the kitchen will look original and stylish. However, we will immediately warn you that caring for black furniture is more difficult. Handprints and traces of kitchen dirt remain equally visible on both matte and glossy surfaces. Such furniture requires more careful care using special products. Otherwise, the kitchen will lose its grandeur over time. Choose the color of the furniture in accordance with the design features of the room. Bright colors can always be complemented with flooring or aprons made of plastic or triplex.

How to care for matte kitchens

If you want your kitchen to serve you for many years, you will have to follow certain rules for caring for it. Such headsets require less attention than glossy ones. However, there are general recommendations here:

• The matte natural wood set can be washed using a steam generator. It will easily steam off any dirt and all you have to do is wipe it off with a soft cloth.
• Do not use abrasive or alcohol-containing products: they will quickly dull the surface.
• Do not use sponges or brushes: only microfiber or soft, lint-free cloths. LIFE HACK: Some people use paper towels. It's much more hygienic.
• Try to wipe the kitchen as it gets dirty - on some types of matte surfaces, ingrained drops of grease are very difficult to remove.
• After cleaning, be sure to wipe the countertops and facades dry: this will extend the life of the kitchen.

As you can see, there is nothing difficult in caring for matte kitchens - according to reviews, it is much easier than maintaining the perfect condition of glossy furniture.

Pollution prevention

To make the facades “repel” dirt, you can rub them with wax polish. It creates a protective layer on the surface of the furniture, making it easier to keep it clean.

Modular furniture after polishing.

The most difficult thing to regularly care for is modular furniture - a lot of grease, dust and other dirt gets into the cracks between the individual elements, and it is difficult to wash these places. Therefore, it is worth using overlays - connectors for the tabletop. They will protect the side walls of the modules from moisture, dirt, and aggressive chemicals. Of course, if the modular kitchen consists of free-standing parts, then you will just have to regularly wipe the side panels.

General recommendations

• The most important rule is: ALWAYS test the cleaner on an inconspicuous area before cleaning your kitchen. Treat it, then wipe clean and dry, wait 1-2 minutes and evaluate whether the color of the coating has changed, whether the shine has disappeared, etc.
• A greasy coating on kitchen furniture is a mixture of dust with fumes and a tiny suspension of fat that forms during cooking. The older the plaque, the more difficult it is to get rid of it. Therefore, the optimal schedule for “general” cleaning of the kitchen from grease is 1-2 times a year, “major” cleaning is every 2 months using mild products and, of course, when the need arises.
• To clean hard-to-reach areas, crevices, or decorative trim, use a toothbrush dipped in the cleaner from our article. You can also clean narrow crevices with a knife wrapped in cloth.

• Do not use harsh abrasives; only baking soda, a soft toothbrush, or the hard side of a regular foam sponge are acceptable. This is especially true for wooden kitchens, as well as any painted furniture without a top protective coating.
• When cleaning the kitchen, it is better to use a new sponge with a clean abrasive side. An old, greasy sponge can do even more damage.
• At the end of cleaning, it is advisable to wipe the kitchen: clean with a damp microfiber cloth and dry with a clean, dry microfiber cloth. This way you will avoid streaks and residues of the cleaning product itself.
• When cleaning the kitchen, pay special attention to the cabinets above the stove.

How to remove grease stains

If you cook on the stove, then oil splashes will inevitably fall on the countertop, wall panels and facades. A water solution of liquid detergent helps to clean matte kitchen facades from greasy stains.

• Add a few drops of shampoo or gel to a container of water and stir thoroughly;
• Apply the composition and see how the stains behave;
• Make sure surfaces are clean and dry with a soft cloth.

It's not just grease stains that remain on kitchen furniture. Stains left by:

• splashes of water;
• tea and coffee;
• red wine;
• turmeric;
• beet and tomato juice;
• juices from berries;
• tobacco smoke.

Traces are especially noticeable on light-colored facades and countertops; if quickly detected, they can be easily washed off with water. Over time, they eat into the surface, and to remove them requires special means and time. In such cases, it is better and safer to use an alcohol solution.

Matte kitchen in the interior

You can use matte surfaces in the kitchen interior in various ways. We have prepared for you a selection of photographs that will show the most successful design techniques.

For example, for a small kitchen in a Khrushchev-era building, a set completely devoid of shine is unlikely to be suitable: you still want to visually enlarge the space. In this case, we recommend that you choose a glossy kitchen and add matte finish with an apron. Usually this element gets dirty almost more than the countertop, and this technique will make caring for it much easier.

Matte kitchens look very impressive in rooms with glossy floors. This way you can make the room taller, and the contrast will give the interior laconicism and a unique style.

The use of combined headsets is also justified. In this case, the bottom of the kitchen is made matte and the top is glossy. We recommend this technique for small kitchens where you want to add volume. Shiny cabinets will make the room visually larger, and the work surface will be easy to clean.

By the way: Such kitchens look very stylish if contrast is achieved not only through textures, but also through the correct selection of colors. You can use two shades that are close in tone, or diametrically opposite ones. The choice is yours!

Sometimes designers go further and combine different textures on one plane. The decision is quite bold, however, definitely worthy of attention.

Sometimes a matte kitchen is decorated with a glossy countertop. In this case, we recommend that you be extremely careful with the materials: check that they are durable, environmentally friendly, resistant to heat and mechanical damage. Otherwise, there is a risk that you will have to change the entire headset.

Idea: If you have an island in your kitchen, give it a high-gloss countertop while leaving the rest of the countertops matte.

A good solution for a matte kitchen would be lighting. Firstly, it will help make the room larger - an effect that matte usually hides. Secondly, additional lighting above the work surface has never hurt anyone. In addition, unlike a glossy finish, a matte finish will not glare, which allows you to use a wide range of design solutions and make the lighting brighter.

Stylish option: Complement the matte facades with a glass apron, which is illuminated from the inside with LED strips. Expensive, but the effect is worth it.

Gloss and matte in comparison

The kitchen set should ideally complement the interior of the room. You can endlessly discuss which kitchen is better, matte or glossy.
We can only say for sure that you should choose a kitchen set based on personal preferences, taking into account the design of the room. Matte kitchen facades, like glossy ones, can transform it and create a place where the whole family can happily gather for meals.

Which surface is more beautiful?

A few years ago, only matte kitchens were held in high esteem, but everything changed when glossy kitchen sets were introduced to the market.

Matte kitchen facades look more noble than gloss. There are no glares on the surface, which allows you to appreciate the beauty of the room’s design without irritating your vision.

For an interior in which flashy colors are not appropriate, this option is more acceptable, because due to the matte finish, the color palette is muted.

However, do not think that gloss is a worse option compared to a matte finish. The glossy kitchen is beautiful and perfectly complements the interior in high-tech, retro or minimalist style. A kitchen made of such material will create a feeling of financial security for its owner.

Considering that both coatings have both pros and cons, it is difficult to say for sure which one is more beautiful.

For those who cannot decide on a choice, an alternative option would be a kitchen with a matte bottom and a glossy top, because this solution will allow you to maintain the kitchen in a noble style and emphasize its uniqueness.

Today, glossy kitchens are a special trend in the foreign market. However, fashion there is quite changeable and already tomorrow matte surfaces can win their market share.

Glossy furniture helps emphasize the luxury of the interior

Which one is more practical?

Perhaps it would be fair to say that a matte kitchen is considered the most practical option. In the kitchen, the housewife constantly prepares food, which causes splashes of fat, which are especially visible on the gloss, shimmering under the influence of sunlight. In addition, matte facades are smooth, they do not absorb dirt and dust, and they are much easier to care for.

Matte finishes are more versatile, but glossy finishes look more impressive, especially if used in a small kitchen.

The glossy facade is difficult to clean, but it is beautiful, so if the owner is not embarrassed by the prospect of daily cleaning, then its choice will pay off in beauty.

Source

The best remedy for pollution is regular care

It is very important to clean dirt regularly, especially if it is light colors and MDF kitchen facade. Drops of grease and dirt can quickly be eaten away and then more aggressive means and efforts on the part of the housewife will be needed to clean the surface. It is worth remembering that abrasive agents and aggressive components have a very negative effect on the finish of the MDF facade; they corrode and damage the paint and film on the plastic coating. Therefore, the rule here is that it is better to wash more often with light products rather than rarely with aggressive and strong ones.