Foam decor: easy, beautiful, practical (52 photos)

The ancestors of foam plastic decorations were architectural ensembles in Ancient Greece and Rome. At that time, heavier and bulkier substances were used as materials for stucco; they gave the structure a majestic and noble appearance. Only a wealthy person could decorate his home in this way. Nowadays, foam jewelry is not inferior in beauty and grandeur to its distant predecessors. They became available to anyone.

Foam decor in a classic style

Foam plastic facade decor

Painted foam decor

Architectural elements made of foam plastic: assessing the possibilities

Before you renovate the interior of a bedroom, corridor or hall, as well as the external facade of the house, you should decide exactly how you see its changes. Architectural elements made of foam can be present in a wide variety of unexpected designs. It is advisable to make a semantic load on this subject or organically introduce it into the planned project. It all depends only on you and your desire.

Foam decor in the shape of a pumpkin

Foam fireplace portal

3d foam decor

The functional side of working with foam products is no less important than the decorative one. Experienced builders love polystyrene foam for its ease of use, light weight and ease of use. It is very easy to saw at any angle, paint, and varnish. The cost of the material is just a penny, and this is a significant plus.

Foam decor in the living room

Foam columns for interior

Foam wall decor

Fiberglass composite

Another innovative material would be fiberglass composite or fiberglass. It is characterized by its low weight, high strength, corrosion resistance, durability and environmental friendliness.

Fiberglass is painted during production by adding pigments, but it can also be painted after finishing.

Used for indoor and outdoor decoration. Due to its cost, fiberglass composite is used less frequently than polystyrene foam and polyurethane, but the durability and beauty of such stucco molding are undeniable.

Decorative columns as an available attribute

The first thing we will look at are decorative columns. This is one of the basic figures made of foam plastic, which is used both outside and inside the house. The column consists of three parts: the trunk (can be either a cylinder or a polyhedron), the lower part is the base and the upper part, supporting the vault, is the capital. It is columns that are used in “aristocratic” styles, when there is a specific goal - to emphasize the wealth and status of the owner.

Foam ceiling decor

Decorative rosette made of foam

Foam molding with gilding

Bulky and wide products attract attention and become the central figure of the interior (exterior); small narrow columns can elegantly frame a fireplace or sitting area.

Such identical and at the same time different columns

Foam Wall Panels

Foam border

Pilasters are in fashion now

This type of jewelry is similar to a column, but differs from it in its smaller size. Pilasters are attached to walls, doorways, fireplaces, niches and other elements. The room visually becomes higher, and the interior becomes more sophisticated. With their help, you can frame a certain area in the room, draw attention to an object, or visually narrow a wide wall.

Give your home a sleek look!

Foam decor

Foam facade decor

Pediments: a hint of status

Expanded polystyrene decorations on the pediment are mainly represented by decorative elements in the form of waves, bends and curls. They are an addition, a crown to the exterior of the house, decorated with columns, pilasters and other pompous elements. The monogram, located in the center of the composition, speaks of belonging to a famous or ancient rich family.

Even if you do not come from a noble family, who is stopping you from showing everyone that this is not so? Simply hang a framed monogram with your initials on the gable

Foam tiles

Foam garland

Ornaments

These decorative elements can serve as part of the composition (insert) or act as an independent decoration.

Volumetric patterns located above the door frame will give it an unusual, more elegant look. With the help of ornaments you can decorate a niche, complementing and emphasizing the wall sconces.

Arches – eternal youth of decor

The functionality of the arch lies in the fact that it saves space when the dimensions of the apartment do not allow the installation of doors. Through it, light penetrates the room, visually expanding the boundaries. Installation does not require special skills; the cost of foam materials is lower than doorways. Expanded polystyrene structures will hide the shortcomings that remained when the doorway was cut out. All this makes foam arches an excellent solution both from a practical and aesthetic point of view. There are several types of models:

• active (complex shape) and passive (simple);
• classic (with a regular semicircle), ellipsoidal (flattened), portal (square shape);
• oriental, trapezoidal, mixed;

Each of them suits a specific interior style, as well as your taste.

New Year's decor made of polystyrene foam

Foam decor in Roman style

Foam decor in the form of a tree

Important! If the doorway is narrow, then it is better to refuse to install an arch, since it will only emphasize the small dimensions: the entrance will seem even smaller than it actually is. The solution is to expand the parameters of the opening, increasing them on top and on the sides.

The use of such designs is also possible outside the home (for example, as a wedding attribute). The arched entrance to the gazebo will look great.

Many brides are delighted with such a romantic arch

Backlit foam tiles

Architectural decor made of foam plastic

Applying glue

Depending on the glue used, its application may vary, but the general principles remain the same. For example, glue is applied either dotted or in a solid line to small protrusions on the inside of the product. If there are none, then it is applied in the corners and in the center.

It is best to apply putty or glue directly to the tiles so as not to overlap the ceiling markings. This is best done with a comb used for tiling. If there are uneven surfaces up to a centimeter, use a comb with a large tooth of 11 millimeters or more. In the event that you see that the applied glue will not be enough, you can carefully apply it to the ceiling. This must be done in such a way that the drawn axes are not erased, and the direction of spreading the glue on the ceiling and on the tiles is opposite. For example, if you applied glue on the tiles towards the door, then on the ceiling you need to spread it in the direction away from the door.

Special glue, for example ELTITAN, needs to be applied differently. Since you need to wait 15-20 minutes before laying, you can save your own time if you apply glue to a whole batch of tiles at once - 3-5 at a time.

Keystones are not a whim, but a necessity

Foam capstones on building facades look very impressive. They are installed above window openings and arches, focusing attention on these architectural elements. This decoration is optional, but adds completeness to the design. It is important to consider that all foam plastic products do not change their appearance when installed outside the home, they are durable and environmentally friendly.

Restrained. Elegantly. Status.

Foam decor on the ceiling

Carved decor on the ceiling made of foam plastic

Corner elements as part of the decor

On the outside of the building, the corner elements are represented by horizontal wide stripes that start from one end of the building and go to the other. There is an imitation of a protruding stone. It looks very impressive in tandem with columns and monograms. Finishing work goes very quickly. In the interior, corner elements are used as a transition between moldings or ceiling plinths. This is not just a “corner”, it is a spectacular decoration that organically fits into the line.

Foam decor in the kitchen

Foam decor on the coffered ceiling

Foam decor in the interior of the house

Recently, the use of vertical moldings, combined into a square or rectangle, which focuses attention on a particular wall, has become popular. Inside such a square you can hang a painting, a collage of photographs or a three-dimensional panel. In this case, the corner elements made of foam plastic may not have a “corner” shape at all.

Corner elements catch the eye. Make your home stand out from many!

Foam decor on frame

Foam moldings

The best manufacturers of polystyrene foam boards

Craftsmen prefer trusted manufacturers, because for a fragile material, the first among indicators is reliability. The Armstrong company produces tiles with improved performance properties. She specializes in making options of any shape, from classic to non-standard. The German manufacturer Ormit produces a wide range of moisture-resistant options. Pays extra attention to the range of shades and sizes. The Antares brand produces a variety of products, from all types of ceiling tiles to decorative corners and baseboards. The Chinese company Matrix has focused its activities on the production of thin tiles. Another Chinese manufacturer, Angara, follows approximately the same policy. Produces affordable options with a thickness of up to 8 mm.

Along with the goods, buyers are also given quality certificates.

Balustrades - timeless classics

Using a foam balustrade, you can make an edging for a terrace, balcony, staircase (both inside and outside the building), and decorate a window by placing them under it. This is a universal element, and it is polystyrene foam that becomes the leading material for its execution.

A wonderful series of balustrades. Who would have thought that this is a solid element?

Foam decor in the toilet

Foam ceiling tiles

Insulation and exterior finishing of a turnkey house

External insulation of private houses and city apartments with polystyrene foam slabs has now become truly widespread. But the industry produces several types of such slabs.

And they differ not only in cost. The density of the material plays a large, if not the main role. The table below contains data on the main types of foam.

• Now let's look at the purpose. As can be seen from the table, the most affordable is PSB-S-15 and many inexperienced craftsmen, in pursuit of savings, take it. So I strongly advise you not to do this. This material was developed more for packaging goods rather than as insulation. The mechanical strength of such slabs leaves much to be desired, plus they crumble very badly. The savings here are not so big, but I guarantee you a headache with the installation and operation of such insulation;

Types of foam boards.

• PSB-S-25 slabs have already been specifically developed for insulation needs. Now this material is a bestseller. In the middle zone of our great homeland and at the latitude of Moscow, PSB-S-25 foam plastic with a thickness of 50 - 75 mm is used almost everywhere;
• Insulation PSB-S-35 in its characteristics is not much ahead of PSB-S-25. From a practical point of view, I can say that it is certainly more convenient to work with, since it has a higher density. But it makes sense to spend money on it if you plan to additionally decorate the house with foam decorations;
• Polystyrene foam PSB-S-50 is considered the densest in the line. It is very rarely used as insulation for the facade of a house. As a rule, this material is used to make insulating cocoons for non-hot pipelines (ventilation, sewage and cold water pipes), as well as various kinds of decorative elements for interior and exterior decoration.

Foam structure (cellular polystyrene foam).

As for extruded polystyrene foam, I’ll be honest, the material is excellent. As insulation, such slabs can be used everywhere, from the underground part of the foundation to the roof.

It is durable, withstands high pressure along the plane and is absolutely impermeable to moisture. By the way, it is from extruded polystyrene foam that volumetric decorative elements are often made, used to decorate facades and decorate buildings.

Structure of extruded polystyrene foam.

Thanks to advertising in our country, extruded polystyrene foam is better known as “Penoplex”. But Penoplex is just a trademark. There are many other domestic and foreign manufacturers that produce this material.

Technique for installing insulation outside the house

Finishing a house with polystyrene foam on the outside seems complicated only at first glance. In fact, even an amateur who is fluent in a drill and screwdriver can handle it. Personally, at one time, in order to cover a house with polystyrene foam with my own hands, a detailed story was enough.

As usual, any work of this kind begins with careful preparation of the foundation. In new buildings, whether brick, cinder block, concrete sections, or foam or aerated concrete, the walls are mostly smooth.

In this case, it is enough to sweep away the dust and walk a couple of times with deep penetration soil. “Betonkontakt” is most often used, but in addition to it there are a number of high-quality compounds. A good consultant in a hardware store will always advise you.

Apply a continuous layer of adhesive using a notched trowel.

There is an opinion that to install foam plastic insulation, curved walls must be leveled. On the Internet, I have repeatedly come across categorical statements that the maximum curvature along the plane should not exceed 10 mm.

I won’t argue; perhaps there are such requirements somewhere in the specialized literature. But I saw with my own eyes how my friend’s old, pre-war private house, built of rough natural stone, was insulated. Those who have seen such houses know that there is no talk of even walls there at all.

So, no one even tried to level these walls; they simply primed the surface and attached foam insulation to it. This insulation has been installed for about 10 years and everyone is happy with the quality. True, in this case the technology was slightly different from the traditional one.

A set of spatulas for work.

When the walls are smooth, gluing foam plastic on them is a pleasure. Of course, special glue is needed here; it won’t work on a simple cement-sand mortar.

For these purposes, I always use Ceresit CT 83; it is suitable for both cellular and extruded polystyrene foam. Some masters use Ceresit CT 85. In this case there is no big difference, both compositions are of high quality.

Before starting installation, below, on the line from which our insulating layer begins, you will need to attach a metal starting L-shaped profile. Such profiles are available in an assortment; the size is selected according to the thickness of the insulation.

Dry construction adhesive.

Ardent “economists”, instead of a galvanized L-shaped profile, simply fill a horizontal wooden plank according to the level and begin laying the insulation from it. The solution is partly acceptable, because this support is needed only at the beginning, until the glue sets. But still, with a metal profile it is more reliable, plus it protects the end of the foam from “unauthorized” penetration of mice inside the finish.

Metal L-shaped profile.

If your walls are smooth, then construction adhesive is applied to the sheet using a notched trowel with a cell depth of about 10 mm. On concrete and brick bases, you can save a little glue by applying it in fragments (perimeter + center of the sheet).

If you are insulating a house from foam or aerated concrete, then you cannot skimp on glue. It is advisable to apply it both on the wall itself and on the sheet, and in a continuous layer. The fact is that cellular types of concrete are hygroscopic, that is, they strongly absorb moisture. And in this case, the glue will act as a protective plaster layer.

Scheme for attaching a corner to a wall.

Now talk about crooked walls. Finishing walls with a relatively curved surface is not much more difficult. Here a notched trowel, with any tooth depth, will be virtually useless. To fix it, you will need to put “buns” of glue on the sheet every 100 - 150 mm.

Fragmentary coating of the sheet with glue.

Naturally, the composition needs to be kneaded thicker so that it does not spread. The height of such “buns” should be slightly greater than the average depth of the curvatures.

Foam plastic slabs must be laid according to the principle of brickwork, that is, in a running pattern. On smooth walls, the material can be glued in one layer, nothing bad will happen. But I always advise installing slabs in two layers, both on flat and curved walls. By the way, to connect the first and second layers, the same glue is used, only it is applied in a thin layer .

And here it is important that the joints between the sheets in these layers do not coincide. This creates a single, monolithic ball of insulation, without any cracks or gaps.

Installation of foam plastic boards on the wall.

Initially, we cover the house with polystyrene foam, fixing it only with glue, and fill in the inevitable gaps with polyurethane foam. After about 3–4 days, the glue will dry and completely set. Next we have to do plastering.

But before plastering, you still need to install foam trim on the outside of the windows, in other words, make foam slopes. And rub all the irregularities with a special mesh or coarse sandpaper. After all, no matter how hard you try, there will be slight curvatures at the joints in any case.

Each owner decides for himself how to decorate the window façade. If you have limited funds, then the slopes can be cut from the same sheets that were used for the walls. They are then plastered, and as a result everything looks quite decent.

Drill holes for umbrellas.

If funds allow, then you can buy a beautiful and durable decorative frame. Most often it is made from extruded polystyrene foam, plus a layer of polymer spraying is applied on top.

But no matter what slopes you choose, they are attached in the same way. First, the perimeter of the window, if necessary, is additionally blown with foam. When it dries, you will need to cut off the excess and “walk” along the slopes with soil.

Foam strips for slopes sit on “buns” made of construction glue. Plus, I always recommend additionally fixing them with anchors or simple nails. As already mentioned, finishing the facade after insulation with foam plastic is done using plaster, but I devoted the next chapter to this painstaking process.

Plastering foam plastic

The choice of plaster composition is a personal matter for each master. I prefer to work with the Ceresit brand. Besides it, the most famous ones include such brands as “Ecomix” and “Stolit”.

Plastering the corner.

In a nutshell, the general structure of the finish looks something like this:

• The first is the rough plaster layer;
• A reinforcing fiberglass mesh, the so-called “serpyanka”, is applied to it;
• And the final layer of our pie is finishing plaster.

Based on experience, on average, about 4 kg of composition per 1 m² is required for a rough layer. The finishing layer is thicker and, as a result, heavier. As a rule, it takes up to 6 kg/m².

The density of fiberglass mesh is selected in the range from 140 to 160 g per 1 m². Some experienced craftsmen equip corners with wall sickles, but this requires skill.

I usually use a special reinforcing corner designed specifically for plastering the corners of a house. The cost is a pittance, but the result is much better.

Reinforcing frame with mesh for arranging the corners of the house.

Anyone who has ever encountered such work knows that any package of dry plaster or glue must have instructions indicating the proportions. So, in this case, it is better to dilute the plaster more liquid; it should literally drain from the spatula. But don’t get carried away, it should drain slowly.

We begin the work from the outer corners of the house, this also includes the corners on door and window openings. The rough plaster layer is applied with a thickness of no more than 2 - 3 mm.

By the way, it is not at all necessary to buy starting plaster for this. The result is much better if you use the same construction adhesive “Ceresit CT 83” or “Ceresit CT 85” as a start.

For work we use a wide metal spatula with a blade size of 350 mm. You can apply the solution to it with a narrow spatula or trowel.

Immediately after applying the composition, a mesh corner is sunk into it. So that the mesh is completely submerged, I first apply 1.5 - 2 mm of glue, then I apply a corner and cover it with another millimeter layer on top.

Covering the reinforcing mesh.

The finishing of foam plastic on the outside along the plane of the walls is approximately the same. But there is a small nuance here.

As you understand, it is almost impossible to apply and secure a wide mesh with a united front. Therefore, it is cut approximately by a meter and fixed into sectors. Plus, when connecting sectors, the mesh should overlap by approximately 20 - 30 mm.

The corner profiles are also equipped with a mesh on both sides and a wall serpentine must be applied to it. In general, there should be no breaks; everything is mounted in a continuous layer, overlapping.

After you have “sunk” the reinforcing mesh into the rough layer, while this layer has not yet hardened, you need to secure our insulation with plastic dowels with wide caps (umbrellas). Because glue alone is not enough to fix the foam frame.

Scheme of a plaster layer for foam insulation of a house.

On average, there are 5 – 7 fixation points per 1 m² of surface. Typically, each sheet is fixed at the corners and in the center.

The process itself is not complicated. Drill a hole about 50 mm deep through the foam in the wall. After this, insert the plastic body of the dowel into the hole so that the head is slightly immersed in the rough layer of plaster and presses the mesh.

Fixing the umbrella.

In addition to the plastic body with an umbrella, this dowel comes with a metal rod. This rod is inserted into the center of the dowel and driven in until it stops. As a result, the dowel expands inside, and it is fixed tightly.

Fastening the insulation with a plastic dowel.

When the rough layer has dried, you can begin arranging the finishing plaster layer. We have nowhere to rush here. We apply the plaster solution with the same wide metal spatula, applying and leveling it in stages, in thin layers. At the end we should still have about 5 mm of finishing plaster.

At the final stage, in order to achieve a perfectly flat surface, the finishing layer of plaster must be rubbed down. As usual, a special grouting mesh or sandpaper is used for this. Please note that you need to grout no earlier than every other day, but no later than 4 days.

In principle, finishing the facade with foam plastic and plastering is completed, but this is not the end. If you are not going to decorate the surface in any way, then the plaster needs to be secured with a finishing primer.

Decorative plaster "Bark beetle".

Then there are a lot of options - from simple painting to applying decorative colored plaster. But this is the topic of a separate article and does not apply to foam plastic; I will talk about it in one of the future materials. And now it’s time to talk about finishing the ceiling with foam tiles.

Rosettes are on the crest of popularity again

Ceiling rosettes for chandeliers are gaining popularity again. They are installed due to the sophisticated look they give to the interior, highlighting the lamp favorably. The traditional shape is a circle, but you can find something more original.

Foam plastic decor in the interior of the apartment

Stone-like foam decor

Volumetric foam decor

Thanks to its low weight and unpretentiousness in choosing glue, installation is very simple. It is worth considering in advance that the rosette can be painted in any color at your discretion.

An unimaginably wide variety of forms. One appointment.

Imitation foam brick

Foam ceiling tiles

Variety of surface types

Based on surface type, there are 3 categories of products: laminated, seamless, mirror. Laminated tiles have a special film layer. Thanks to this processing, a wide color palette becomes available, and the shades retain their brightness for a long time. Laminated products are resistant to moisture. Seamless options have perfectly smooth edges, so gluing them and applying them to the surface will not cause any difficulties. In this case, the joints will be practically invisible, the rows will be precise and regular, and the ceiling covering itself will have no signs of curvature. Mirror materials receive a reflective layer, and, thanks to this ability, are used to visually increase space and design techniques. Mirror products are given a variety of shapes.

To clean “washable” options, solvent-free products are used!

Decoration of the facade and installation of stucco molding from foam polystyrene: everything is simpler than it seems

The facade is the calling card of your home; it is the “clothing” by which it is greeted. That's why it's important to decorate it as beautifully and elegantly as possible. Facade cladding materials must not only be excellent, but also durable, as they will be exposed to rain, wind, sun, low and high temperatures. By purchasing products made from foamed polystyrene, you ensure easy transportation and installation, as well as a wide variety of decorative elements, and the ability to implement interesting ideas. At your disposal are keystones, columns, arches, monograms, moldings and other foam wall decor. By positioning the stucco correctly, maneuvering between the variety of species and the number of elements, you can create a unique architectural masterpiece.

New Year's polystyrene foam decor

Styrofoam decor

Foam star decor

Installation is quite simple and quick. It involves “attaching” to glue, which can be combined with fastening to anchor nails for durability. The glue is applied only to the surface of the part. This should be done with a spatula, evenly distributing the substance. You need to glue the part evenly right away, and then wait a little. The next one should be placed at a distance of 2 mm from the previous one.

Foam decor on the chest of drawers

Frame mount

In case of pronounced defects in the ceiling or, for example, the need to disguise the wiring, the panels are mounted on a frame made of metal or wood. Initially, they determine the area of ​​the ceiling, the location and type of lamps, carry out calculations, and mark out the places for attaching frame structures, which are placed perpendicular to the intended direction of installation of the slabs.

It is recommended to fill the space between the ceiling and the panels with heat-insulating, noise- and vapor-absorbing materials or silicone sealant. The distance between the sheathing bars should not exceed 40 cm. The bars are attached to the ceiling with self-tapping screws or dowels. A properly prepared frame will make it possible to beautifully and efficiently strengthen the tiles. The distance from the ceiling to the plane of the frame should be at least 10 cm when installing built-in lamps.

Installation of the frame begins from the corner of the room, located at the minimum height from the starting profile. Finish by installing the finishing corner, without securing the panel. Distortions of laid panels are not allowed. Upon completion of installation, the ceiling plinth is attached, which decorates the junction of the ceiling panels and walls.

Mounting polystyrene foam boards on the frame will slightly reduce the height of the room, but will hide major defects Source remoo.ru

Features of interior decoration with foam decor in our time

Expanded polystyrene products are used for interior decoration of rooms. With the help of polyurethane foam parts, you can emphasize the sophistication of the interior space and add an unusual accent to it (for example, in the form of rosettes or curly elements). Foam cornices in tandem with lighting will provide volume to the ceiling, and pilasters near the fireplace will add grandeur. Important! There are so many options for decorating a room that you can lose your head. Remember that everything is good in moderation. Excessive curls and pomposity can be a sign of bad taste.

Foam decor on panels

Gluing technique

Before installing decorative tiles, you should carefully level the surface. Tiles on the ceiling will look aesthetically pleasing only if you strictly follow the technology for fixing them.
First you need to prepare the following tools and materials:

• level, tape measure, stationery knife;
• spatula, miter box, grater;
• paint brush or roller;
• hacksaw for metal;
• long steel ruler, pencil;
• tile adhesive, putty, primer, paint.

Since the work will not be done at height, you will need to buy or rent a stepladder. The respiratory organs are protected by a respirator, and the hands are protected by gloves.

After this, the base is prepared.

This process consists of the following steps:

1. Dismantling. Lighting fixtures, wiring and baseboards are removed from the ceiling. All unstable fragments of the old finish are removed. Grease stains, mold, and rust stains are removed. Dust and dirt are washed off from the ceiling.
2. Alignment. It is carried out with cement mortar or starting putty. After the composition has dried, it is polished using a grater.
3. Primer. The surface is covered with the solution several times until it stops being absorbed. It is advisable to add an antiseptic to the primer.

You can use any adhesive for ceiling tiles. You can glue polystyrene foam to the ceiling diagonally, in even or offset rows.

Installation is carried out in the following sequence:

1. Marking.
2. Mixing glue. You can use the ready-made composition in tubes.
3. Applying mortar to tiles. It is better to apply it with a line along the edges and several dots in the middle.
4. Attaching fragments to the ceiling in accordance with the markings. They must be pressed tightly to the base. Exposed adhesive should be removed immediately.
5. Surface decoration with skirting boards. It is advisable to use lamellas of the same composition and texture as the tiles.

Interior styling with foam decor: the variety is endless

Try to achieve the most unexpected effects in various styles using stucco finishing.

Foam decor in a Scandinavian interior

Classic and neoclassical: something that will never go out of style

A feature of these areas is the traditional, calm and solemn design of the premises. They are characterized by the use of columns, pilasters, arches, various moldings, panels, top and border plinths. With the help of sockets the lamp is framed on the ceiling or walls.

Foam decor in the bathroom

Antique style: enjoy the motifs of the ancient world

Often used in the hall or living room. This is sophistication. High ceilings are decorated with ornaments and decorative panels. Window vaults are decorated with cornices and monograms. The main accent on which all attention is focused are the columns and sculptures. In order to visually increase the scale of the structure, these elements are placed under the base of the arch. Visually it seems as if Apollo came down from heaven and holds the vault on his shoulders.

Foam ceiling plinth

Rococo and Baroque as a tribute to the Renaissance

These styles came to us from the distant 17th-18th centuries and brought to the interior a feeling of pomp, majesty, and inexhaustible wealth. At that time, stucco molding was made mainly from gypsum; such decorations were expensive and bulky. This motif has carried over into modern decor.

Stucco foam decor

An abundance of moldings on walls and ceilings, borders, various columns, balustrades, rosettes and many other details, skillfully combined in one room - this is what is necessary when decorating the Rococo and Baroque styles.

Foam decor on a false fireplace

Modern: letting in everything new

Geometric lines are a thing of the past; all features in an Art Nouveau style interior tend to be smooth, which is why design with arches is common. Ceiling vaults are decorated with decorative tiles imitating beams, caissons, and domes. Despite the fact that this style tries to be unlike anything else, the volumetric decoration of the ceiling and decoration with other foam products remain unchanged.

Brick-like foam decor

Eclectic: make your own style

To get eclecticism, mix similar styles (2 or more). A very important point is the correct application of color. The result is an original decoration of the room. In such a situation, any foam part can be used. Foam stucco on the ceiling has already become traditional. Framing doors and windows with the same or similar rims will create an interesting tandem. Kitchen decoration in this style is gaining popularity.

Foam panel

Types of ceiling tiles and how to choose the right one

In a room with high humidity, we take into account the presence of ventilation, exhaust hoods, and the moisture resistance of the tiles. Shake the stamped products and check for breaks, uneven edges, and whether there is a difference in thickness. Form errors are considered defective.

Types of tiles depending on manufacturing method

There are three main varieties:

• Stamped - fragile, 6-8 mm thick, low quality, with a brittle, granular structure: cannot be washed, but can be painted. Cheap. Pressed from foam blocks. It is necessary to pay attention to the identity of the products.
• Injection - durable, white, with a clear pattern, environmentally friendly, 9 - 14 mm thick, moisture-resistant, fireproof, with high heat and sound insulation properties, painted, average price. Produced by sintering. Used when installing a seamless ceiling.
• Extruded – smooth, dense, durable, covered with a protective water- and dust-repellent film. He washes himself. It has minimal thermal conductivity, is resistant to deformation and frost, is easily restored in case of damage, and cuts smoothly and accurately. The curved edges of the ceiling side of the tile hide surface defects. The cost is high. Pressed from polystyrene strips. Once painted or laminated.

Variety of polystyrene ceiling panels Source sdelaipotolok.com

Surface type of foam boards

Ceiling tiles made of polystyrene foam come in matte, glossy, or with a protective coating. The variety of surface types makes it possible to use tiles for utility, domestic premises and living rooms, including bedrooms and children's rooms:

Mirror is an original type of tile with a reflective surface effect that will visually expand the space of the room.

Laminated - an absolutely smooth front side is formed due to a film pressed on top of the product, which protects the tiles from moisture, and its pattern allows you to vary the choice of decor (color, imitation of natural materials - the choice is great). Easy to clean. Suitable for bathrooms, showers and kitchens.

Seamless is a special type of tile that creates the illusion of the integrity of the canvas. This effect is achieved by the shape and clarity of the edge cut in combination with a correctly selected pattern. Ceiling tiles are seamless in name only: the edges fit together so perfectly that the joints are completely invisible. According to the type of production, it is an injection panel that is glued to an exceptionally flat ceiling.

Such different-looking foam ceiling tiles Source kaksdelatpotolok.ru

See also: Catalog of house projects for construction using half-timbered technology

Decor of foam tiles and additional details

The variety of foam ceiling panels concerns not only the production method, but also the appearance. Tiles can give the impression of different materials: marble, wood, iron. Textile-inspired products with a large selection of colors look beautiful; tiles with a printed pattern look unusual.

Corners, ceiling plinths, rosettes and moldings are related parts for installing ceiling tiles.

The correct selection of additional elements, complementing each other, will add style, originality and harmony.

Embossed tiles look like stucco Source img0106o.psstatic.com