Dishwasher: do-it-yourself installation in a kitchen unit

SHARE ON SOCIAL NETWORKS

FacebookTwitterOkGoogle+PinterestVk

It’s hard to imagine a modern kitchen without a dishwasher. Using this unit saves time and effort. Two steps are required to make the dishwasher ready for use: installation and connection. Before starting work, you need to determine a suitable location, and also take into account many small nuances, without which it will not be possible to carry out the work correctly.

Installing a dishwasher is a rather complex process with many small nuances.

Features of installing a dishwasher depending on its type

There are several options available to ensure harmonious integration of the dishwasher into the kitchen furniture. Most often, the dishwasher (DMM) is installed in the place that was previously selected for it. All devices of this type are divided according to their dimensions into three types:

In terms of size, dishwashers come in full-size, narrow and compact sizes.

• compact;
• narrow;
• full size.

Units that belong to the first group can accommodate a small number of cookware sets (up to 5). They are most often installed under the sink. Sometimes such models are located above the countertop. The width of these models is 60 cm. They are great for people living alone. Installing dishwashers of this type is not particularly difficult. This model can also be placed in a cabinet above the sink.

Narrow PMMs are so called because of their width, which is 45 cm. Such models are more spacious, since in other dimensions they are similar to full-size machines. The number of sets that can be loaded into such a device ranges from 6 to 10. Narrow models are divided into fully and partially integrated. They are installed in a kitchen unit, the doors of which act as facades. They can have dimensions of 45 and 60 cm. The front for the dishwasher is best purchased separately.

Full-size units have a width of 65 cm and a height of 90 cm. They have the largest capacity among all types of PMM. Devices can be integrated or installed separately from the headset.

Full size dishwashers are 90 cm high and 65 cm wide

Note! Having a pre-designed diagram describing the installation of the dishwasher greatly simplifies the task. The drawing can be prepared for a specific model, for example, for installing a Bosch dishwasher (or any other brand).

Most often, companies involved in the production of kitchen furniture provide a special place in which the future dishwashing device will be located. To do this, manufacturers take the dimensions of a narrow unit as a basis and add 5 or 10 cm (on each side) to these values. If a set of kitchen furniture does not imply the installation of a PMM, then it is best to purchase a separate device.

When choosing free-standing models, it is very important to understand one nuance: the appearance of the device body must be in harmony with the design of the kitchen space. If this rule could not be followed for one reason or another, then you should choose a place for installation in the immediate vicinity of the sink. Before starting work, be sure to carefully study the instructions indicating how to install the dishwasher. Bosch is the best choice for integrating with minimal effort.

The distance from the body of the dishwasher to the back wall must be at least 5 cm. This is a very important point, failure to comply with which will lead to failure of the machine, since there will be no good ventilation.

Most often, companies producing kitchen furniture provide a special place for a dishwasher.

Neighborhood: dangerous and not very

Correct installation of any household appliance guarantees its long and uninterrupted operation. Therefore, it is important to pay attention to the advice of manufacturers and specialists so that your mechanical assistants work efficiently and for a long time. Let's look at a few of the recommendations.

Tip 1. It is not recommended to install a built-in dishwasher from the very edge of the kitchen unit as its extension, otherwise you will have to additionally order cabinet parts and countertops from furniture makers.

Tip 2. The dishwasher should be placed away from any heat sources, be it a radiator, oven or hob. The recommended distance from the oven should be at least 40 cm; some manufacturers even indicate this in the installation instructions. Failure to comply with this rule may result in the service center refusing warranty repairs.

The dishwasher must be installed in a specific place in the kitchen, taking into account the location of other built-in units

In addition, excessive heat will cause the machine to overheat, which will affect the quality of the seals, which will dry out very quickly and become unusable. If, nevertheless, the dimensions of your kitchen do not allow you to install the appliances at the required distance from each other, then lay a sheet of foil polyethylene between the appliances.

Tip 3. It is not advisable to place dishwashing equipment close to the washing machine. During the wash and spin cycle, the washing machine vibrates quite strongly and hits neighboring objects, which is quite destructive for them.

It's only worse if you turn on two devices at the same time. The vibration of one device, transmitted to another, can break fragile dishes located inside the washing chamber.

The dishwasher should not stand next to the machine, the latter can cause serious damage to it.

Tip 4. The seemingly harmless microwave oven does not have a good effect on household appliances. The electromagnetic waves it emits can have a negative effect on the electronics of washing machines and dishwashers. Ideally, it is generally better to hang the stove on special brackets that are attached to the wall or place it at a distance of at least 50 cm from any household appliances, but this is not always possible.

Tip 5. The dishwasher will easily tolerate proximity to the freezer and refrigerator. It does not heat up very much and vibrates very slightly, which does not in any way affect the operation of nearby equipment.

But we can place the device we are interested in next to the refrigerator, since it will be a completely safe neighborhood for it

How to install a dishwasher: choosing a location

Before you begin installing the dishwasher, you need to determine the location in which it will be located. It is worth considering several important points. The easiest way is to choose a place for models that are integrated into the kitchen set. Such devices are most often mounted in furniture modules, which belong to the first level (floor cabinets). An area with a small amount of space should be allocated for the dishwasher.

Compact models, if desired, can be built in a place that is most convenient to reach. They can be placed at chest level in a furniture set. Errors when choosing the location of the PMM often lead to difficulties with operation and maintenance, so first of all it is necessary to build on the type of dishwasher and the features of a particular device. This will allow you to integrate it into the kitchen ensemble as harmoniously as possible.

Note! Chinese models may have design features that influence the integration process. For example, some Medea dishwashers are equipped with special adjusting screws that are responsible for the degree of tension of the facade.

The most suitable place to install a dishwasher is the module located next to the sink. This is quite logical, since all the water supply and sewerage units that are necessary to connect the PMM are concentrated in this area. By choosing this location, there will be no problems connecting hoses to all necessary communications.

The module located next to the sink is considered the most suitable place to install a dishwasher

Models from foreign manufacturers (for example, Electrolux) are best suited for quick installation. Installing a dishwasher is often accompanied by a variety of minor setbacks. Problems arise much more often if you need to choose a place for a dishwasher in a finished set. In such a situation, there is only one thing left to do - adjust the dimensions of the furniture to the dimensions of the device. If this fails, then you will have to dismantle individual modules of the kitchen ensemble.

Thus, the most important rule is to select in advance a suitable place in which the dishwasher will be placed. This rule applies not only to dishwashers, but also to other kitchen appliances. The sketch of the kitchen set should be drawn up second.

Installation of new pipes

For major installation you will need a varied range of materials:

• polypropylene pipe PPR PN20 with a diameter of 20mm

• water socket

• union nut connectors

• 90 degree connection fitting PPR-90

• HP/HP elbow with ¾" external thread

• FUM sealing tape

When installing pipes, the socket method is used. To do this, you will need a special apparatus for soldering polypropylene pipes.

The total length of the pipe and the number of fittings are selected individually. This depends on how far the dishwasher is from the cold water collector.

To begin with, mark the route where the pipes will be laid from the distribution manifold to the installation site of the PMM.

Then, use a wall chaser to cut to the required depth.

Next, connect the PPR connectors with a union nut to one of the manifold outputs.

Cut a piece of pipe so that it will last until the first turn or corner. At the same time, do not forget to leave a margin of 15mm for connections on each side.

Connect the pipe and fittings using the soldering method, controlling the position of the elbow.

After connecting all the pipes along the marked area, install a water socket at the very end. Be sure to fix it on the wall.

Next, screw a ¾-inch male threaded elbow into the water socket.

Mount the water supply hose onto the angle.

The AquaControl or AquaStop system with which it may be equipped should protect against leaks in the event of a breakdown and automatically stop the water supply.

Turn on the water and check the entire system. If everything is fine, you can finally seal the groove.

Installing a built-in dishwasher: preparing tools and materials

Most manufacturers of dishwashers include instructions for the units. Such manuals may indicate what tools and materials are needed to integrate the dishwasher into the kitchen ensemble. However, such instructions are not always included. Before starting work, you need to prepare the following tools:

• electric drill;
• screwdriver;
• Screwdriver Set;
• chisel;
• regular hammer;
• pliers;
• level.

The tools that will be needed to install the unit are an electric drill, screwdrivers, a screwdriver, a hammer, a level, and pliers.

Instead of a drill, you can use a hammer drill to install the dishwasher yourself. Screwdrivers should be prepared not only with flat tips, but also with Phillips heads. It is quite inconvenient to use a regular level in such work. Experts recommend using laser, if possible. You will also need to prepare some auxiliary tools: a pencil, a tape measure and a construction square.

Helpful information! Installing a dishwasher into furniture is one of the stages of its integration. If it is necessary to connect the PMM to communications, then the list of tools requires addition.

The parts that will be used to connect the device should not be used, since their reliability is significantly less than that of new ones. It is especially not recommended to use used parts when installing Bosch dishwashers. It is quite problematic to carry out all stages of installation and connection with your own hands, so it is recommended to study photo and video materials related to this issue.

Dishwasher installation rules and some useful tips

Before purchasing and installing a dishwasher, you need to measure the location that was previously chosen for it. The check is carried out using a construction tape. An even better solution is to take a measurement before purchasing the unit. How to find out the size of the PMM? As a rule, the dimensions of products are indicated on the websites of manufacturers and companies involved in their sale. If the size of the niche exceeds the dimensions of the dishwasher, then you can adjust the height of the device using the legs.

Before purchasing a dishwasher, you need to measure the location you have chosen to install it.

It is very important to remember that some PMM models are highly sensitive to tilt angles. Even at the slightest angle (2 degrees), such dishwashers may experience interruptions in operation. This category includes products from Hotpoint Ariston, as well as Indesit dishwashers. The instructions that come with them are a must read, as they contain many important nuances, including those related to installation.

Before proceeding with the integration of the device, it is recommended to place a metal plate under the tabletop. This measure is necessary to protect the wooden material from steam. Devices that are fully integrated into furniture most often include such a plate, but it is easy to make it yourself.

You can install a compact dishwasher under the countertop. Some of the best devices of this type are models produced by. Installing a dishwasher of this type is very simple, due to its size.

Most dishwashers come with special parts that are used when hanging the door. To carry out installation correctly, it is recommended to check preliminary calculations, wiring diagram and other details several times in a row.

Special parts are included for hanging the door

Optimal dimensions of dishwashers for installation

The largest percentage of dishwashers are 60 cm wide. Such devices can cover the needs of any family. There are also narrow models suitable for embedding, the width of which is 45 cm. It is worth saying that devices with a width of 448 mm have good functionality, not much different from standard models.

The height of narrow dishwashers ranges from 815 to 875 mm. These values ​​were not taken by chance - they were selected in accordance with the standard height of the cabinets included in the kitchen set. When drawing up an installation diagram for a dishwasher, it is worth taking into account not only its dimensions, but also the small margin that the niche should have.

Note! If the kitchen furniture was made to order, you should be careful. Standardized devices may not be suitable for this type of headset. It is recommended to take your own measurements of the niches and compare them with the dimensions of the device.

The easiest way to integrate a 45 cm built-in dishwasher is to install such devices in a matter of hours. The depth of dishwashing units is most often 55 cm. On sale you can find models that differ in height and depth. You should pay attention to the dimensions before purchasing a PMM.

Optimal dimensions for installing dishwashers: height – 82 cm, width – 60 cm, depth – 58 cm

Tips for connecting hydraulics

All dishwashers have the same hydraulic connection diagram. For example, a 60 cm built-in dishwasher is connected in the same way as a 45 cm wide dishwasher. Here are some tips:

1. The standard length of the drain hose is usually sufficient with a large margin. If the machine is located far from the entry point into the sewer, then you will have to additionally install the sewer pipeline closer to the machine.
2. To seal connections, use special plumbing sealant.
3. To work with a pressure hose you will need certain skills. If you have never done this before, it is better to invite a specialist. This will provide you with quality and reliability.
4. If you need to additionally secure the hoses to the wall, then use special anchor clamps. Attach the required number of clamps to the wall and attach the hoses to them. To secure it to the wall you will need a hammer drill.

How to integrate a dishwasher into the kitchen: integration into the cabinet

The cabinet located next to the sink must have a width greater than 45 cm. In such a situation, there is no need to come up with complex installation diagrams; you just need to install it into the adjacent module. When purchasing products from some brands, you should be aware that they require the installation of a special siphon when connecting (for example, Electrolux devices). Videos of installing a dishwasher of this type can be easily found on the Internet.

To prepare the lower cabinet for installation, you will need to do several manipulations. First of all, you need to remove the transverse partitions (shelves) from the cabinet, and also dismantle the back wall. The bottom panel is removed only if necessary, for example, if the height of the module itself is not enough to accommodate the dishwasher. To fix the case, it will need to be positioned strictly in a vertical plane. For this, adjustable legs and a building level are used.

If you wish, you can call a specialist who will do the job professionally. However, this will come with additional costs. The cost of installing a dishwasher depends on many factors: model, location, technical difficulties, etc.

Don’t forget about the front panel, which performs a decorative function and contributes to the harmonious integration of the dishwasher into the kitchen set. The facade is usually made from a cabinet door. However, it can also be purchased separately (to order). Devices that are part of the partially integrated group do not require a decorative front panel.

To prepare the lower cabinet for installation, you will need to remove the transverse partitions and dismantle the back wall

Installing a dishwasher in a separate module

Sometimes there are situations when it is not possible to allocate free space for installing new kitchen appliances. In this case, you can place an order for a separate module that will complement the existing kitchen ensemble. However, the rules regarding its location are the same. It must be located in close proximity to water supply and sewerage.

Related article:

Built-in dishwasher: modern appliances for a comfortable life

Varieties of models according to installation method and dimensions. Functionality of compact devices. Manufacturers and prices.

Thus, it is possible to transfer equipment that was previously located near the sink into the new module, and integrate a dishwashing unit into the old one. In this case, everything will depend on the features of the installation. Built-in dishwashers must be leveled and secured. This is required to ensure that the device does not produce vibrations during operation. If you ignore the fixation of the PMM, then it will make a lot of noise and move the cabinet.

Helpful information! The hoses located behind, in the space between the rear wall of the dishwasher body and the wall, must run parallel to the surfaces. Access to them must be free so that problems do not arise if it is necessary to replace a failed element.

When connecting certain models, you must carefully read the instructions. Bosch dishwashers, as well as other devices from popular brands, are sometimes quite difficult to integrate into an old set. To avoid having to change furniture, you need to study the issue of “compatibility” at the stage of choosing a PMM.

Access to hoses supplying and removing water in a separate module must be free

If the unit is located under a common kitchen countertop, maintenance becomes more complicated. A communication problem that arises in such a situation will require dismantling the dishwasher unit.

Features of self-accommodation

Let's consider two possible options for installing equipment in the interior. This is installation into a new set, the design of which takes into account the order of a special niche for the dishwasher. And also, placement in an old kitchen, taking into account the presence of ready-made cabinets.

Installation in a new kitchen

Typically, built-in PMM models are made narrower. When ordering a kitchen, it is much easier to provide a place for the appliance in advance, otherwise it will be difficult to fit the appliance into the set without remodeling the furniture.

If there is nothing in the room except the walls, then make a sketch of the future kitchen. Consider the space for household appliances, the possibility of convenient connection (location of sockets, proximity to communications).

Have you already decided on your choice of dishwasher (Bosch, Whirlpool, Kandy)? If you want to fit the device into an Ikea kitchen, then measure the dimensions of the model in the store, enter the results into a sketch and pass it on to the furniture makers. Don't forget about space for ventilation.

The walls of the PMM should not come into contact with the furniture. A minimum gap of 5 cm is left on the sides and back. It is important to remember about connecting hoses and wires. Therefore, the cabinet can be ordered without the back. The thickness of the facade is included in the calculations.

This is a headset panel that will help hide your equipment from prying eyes. The method of attaching it to the dishwasher is taken into account. These can be bolts or self-tapping screws.

Accommodation in a finished kitchen

If space allows, move the kitchen cabinets apart to a distance of 45-60 cm. It is important to choose a place close to the sink. Also consider the distance of the outlets. A conventional PMM on legs with wheels makes installation easier.

You can put it in a cabinet or under the sink, and adjust the height of the legs. Additionally, there may be fastenings for fixing the case to the walls of the headset.

The installation of a free-standing machine under the countertop should take place in the following way:

1. The top panel of the PMM is located close to the tabletop. But this should not prevent the door from opening.
2. The desired height is set by adjusting the legs. If the legs are static and you need to raise the equipment, then fit a wooden box under the base.

If the depth of the niche allows, move the dishwasher deep enough to hang the cabinet door. Prepare the cabinet for installation:

• remove the front part;
• remove all drawers and shelves;
• unscrew the back wall, it will no longer be needed.

No free cabinets to place your equipment? Then the only option left is with a sink. This may be a corner location, the main thing is that the dishwasher fits into the hole.

To gain extra space, install a new siphon that drains water back and then down. If the sink is too deep, it can be replaced with a shallower one.

What to do if embedding is not practical

Some kitchen sets do not provide the possibility of installing a dishwasher. In addition, there may simply not be free space in the furniture. What to do in this case? In such a situation, it is best to purchase a freestanding model.

Dishwashing units of this type do not require complex integration work, so this option is perfect for people who do not want to spend a lot of time fiddling with the installation. There are three placement methods for freestanding devices:

• on the floor;
• into a niche;
• on the tabletop.

The best models, installed separately, are also produced by Electrolux. Installing a dishwasher of this type will not cause any particular difficulties. In this case, all work is reduced, as a rule, only to connecting to the power grid and other communications.

If it is not possible to install a dishwasher in your kitchen unit, you can purchase a separate model

You can completely remake some of the modules that are part of the kitchen ensemble. Transferring communications is also possible, but this is quite labor-intensive work. Usually this option is chosen last, when it is necessary to integrate a free-standing model and install a decorative facade on its front side.

Preparing communications

It's no secret that a built-in dishwasher needs a stable connection to the electrical network, a connection to the water supply (sometimes to both hot and cold water at once) and sewerage. It is better to prepare these communications at the very beginning of kitchen renovation. Let's start with electrics.

1. Using a hammer drill and a chisel, we tap the wall for the electrical wiring.
2. In the electrical panel we draw a three-wire wire and install the automatic switch.
3. We connect a pre-prepared copper wire to the difavtomat and pull it into the kitchen, through a grooved channel to the location of the socket box.
4. We hollow out a niche for the socket box, install it and remove the wire.
5. We disassemble the moisture-resistant socket, connect it to the wires and screw it in place.

At first glance, nothing complicated, but in practice problems may arise, so if you do not have experience in handling electricity, contact a specialist. The connection to electricity has taken place, now it’s time to install the wiring for the water pipes. First, figure out how you will connect your dishwasher to hot and cold water or just cold. Most often, craftsmen connect “dishwashers” only to cold water - this is best.

• At the end of the outlet of the cold water pipe, install a tee (or a tee with a tap).
• We get two free leads, one will go to the sink faucet, and to the other we will connect the dishwasher inlet hose.
• All threaded connections must be taped with a foam tool to ensure the connection is as reliable as possible.

We will connect the dishwasher to the sewer system last after the sink and siphon have been installed. All we have to do is connect the drain hose to the siphon outlet, and we can complete connecting the dishwasher in a few minutes.

How to install a dishwasher: checking the contents and unpacking

Preparing for installation of a dishwasher includes two more stages, in addition to choosing a location: unpacking and checking the contents. It is recommended that unpacking be carried out in the presence of employees of the company from which the unit was purchased. This is necessary in order to check the presence of all parts necessary for installation. If there is a problem with the packaging, then you must inform the company’s employees about it.

Note! You also need to check the availability of instructions (necessarily in Russian). Without it, it is much more difficult to independently understand the design features of a particular model.

If necessary, you can try looking for installation instructions on the company's website. Many well-known brands add them to the product description (for example, Bosch). Dishwasher instructions are very important, so don't ignore this point.

When checking the package, you need to pay attention to the presence of instructions in Russian

In addition to the dishwasher itself, the kit often includes parts that are necessary for the correct installation of decorative trims. It is also necessary to check the presence of retaining elements, a rubber apron used for protection, and gaskets with hoses. The latter are needed when connecting the device.

Dishwasher: installing a built-in model

Before you begin integrating the built-in model into the suite, you need to once again make sure that the cabinet has the appropriate dimensions. You will need to make holes in its walls through which hoses will pass connecting the device to the communications. Installation is carried out in stages. Let's consider this process using the example of a Bosch dishwasher. Installation of the built-in model requires care.

So, the first step of installing an integrated PMM involves its location opposite the niche that was chosen to place the device. Then you will need to pull the hoses responsible for supplying and removing water through the holes. This is to ensure that the hoses are the correct length. If necessary, they will need to be lengthened.

The next step in installing a Bosch dishwasher (or any other) requires the use of instructions. You will need to glue a special film to the inside of the tabletop. It will protect the wooden material from moisture. Then you need to fix the tapes needed for sealing along the edges.

Before installing the built-in model into the suite, you need to make sure once again that the cabinet has the appropriate dimensions

Next, the mounting plate and special damping elements are installed. The latter are used to dampen vibration of the dishwasher. The next step is to adjust the height of the legs. The unit body must be positioned strictly vertically. After this, use a tape measure to check the distance from the walls of the niche to the edges of the PMM.

Note! Dishwasher sets often include soundproofing material. It is fixed at the bottom of the niche. Without soundproofing material, the device will make too much noise during operation.

The next stage is the installation of decorative elements. Trims can be custom-made or made yourself from the front parts of the cabinet. To make a decorative facade, it is necessary to adjust the doors to the dimensions. To do this, it is recommended to study the corresponding video. The installation of the built-in dishwasher is nearing completion. The linings are fixed using self-tapping screws, which often come complete with other auxiliary elements. After installing the front part, the PMM is connected and a test run is performed.

First start

The first start is made empty without loading dishes. This is necessary to wash off various deposits remaining after factory assembly on the surfaces inside the washing chamber. Perform the following actions:

• At the bottom of the chamber, unscrew the compartment lid;

• regenerating salt is poured into the neck to the very top;
• screw the lid back on;
• on the inner surface of the door, pour gel or place a tablet into containers, pour in rinse aid;
• on the control panel, by pressing the corresponding keys, set the degree of water hardness, select the washing mode (at the first start, set the economical program);
• press the “Start” button and close the door.
• After finishing work, the dishwasher can be loaded with dirty dishes.

How to Install a Built-in Dishwasher: Cabinet Remodel

When integrating a dishwasher into a cabinet, you need to understand exactly how this procedure should be carried out. Let us consider in detail the sequence of actions that allow you to install the PMM in one of the lower compartments of the furniture set. First, you need to remove the bottom shelf from the cabinet, after which the front plinth is dismantled.

First, the bottom shelf is removed from the cabinet, and then the front plinth is dismantled

Then you can remove the doors. It is important to understand that the walls, the back panel, and the top must remain. The video “Installing a Bosch dishwasher” will allow you to visually familiarize yourself with the integration process. The instructions that are given in it greatly simplify the work.

All dishwashers have the ability to be fixed to the countertop and walls located on the sides. However, each manufacturer produces individual retaining elements, so there are no universal recommendations in this regard. It is necessary to start from a specific model.

Particular attention should be paid to methods of fixing domestic models (for example, “Hephaestus”). Dishwashers are characterized by good build quality, but when integrating them into a cabinet, various problems may arise due to design features. Mounting methods also depend on the type of furniture.

The dishwasher unit is usually fixed to the cabinet walls using polymer inserts. Their number is most often 4 pieces. They should be located on both sides (bottom and top). A dishwasher installed in this way not only has good stability, but also produces less vibration.

The dishwasher is fixed to the cabinet walls using polymer inserts

Some models do not provide for the use of such a number of polymer liners. Some devices can be cited as an example. Installation of built-in dishwashers of this type is carried out using only two inserts, which are located in the upper part of the cabinet (under the countertop).

There is another common situation to consider. If the kitchen countertop is solid, the cabinet must be completely dismantled. Thus, the device will be placed between two walls. The bottom panel in this situation is not mandatory, but can be removed if desired.

Connection between drain and sewer

This method of independently connecting the dishwasher to the sewer is considered very common. In this case, the connection will be made through a siphon. The method in question requires the technician to act carefully and follow all the advice regarding connecting the dishwasher to the sewer. The drain will need to be equipped with a special outlet and a check valve. This will reduce the likelihood of water flowing directly from the drain into the dishwasher.

The outgoing hose from the machine must be fixed to a wall or cabinet. It is best to place it 50 cm above the drain entrance. To drain water from the dishwasher on its own, tilt the hose at a special angle. The angle is specified in the instructions for your car model. We connect the drain circuit to the siphon under the sink itself. When there is no drain siphon under the sink, then the PMM drain hose must be connected to the sewer pipe outlet, after which the joint should be wrapped as tightly as possible with tape. Under pressure, the hose may fall out; to keep it tightly in the sink, you will need to use a special holder. To connect to the siphon, you need to use an additional fitting. In Moscow stores you can find ready-made options for PMM. Before connecting the drain, you need to re-check the hose size

It is important that there is enough of it; it is better not to use a very long one, because... this has a negative impact on the efficiency of pumping equipment.

How to install a front on a dishwasher: details of the process

The front part of the integrated devices must be closed using a panel, which is most often made to order. It must fully comply with the design of the room. In order to install such a panel, a special fixing element and a pattern are included with the PMM.

Note! To install the front on the dishwasher, you need to take a paper model. It marks all the necessary areas, as well as the places where the clamps will be installed. This sheet is applied to the front door, and the decorative element is marked on it. All necessary zones can be marked using a regular awl.

To install the front panel, the dishwashers come with a template and a special clamp.

Next, you will need to remove the paper model and drill holes for the screws. Locks are installed in the required places, as well as the front door handle. This manual is suitable both for installing fronts for 45 cm dishwashers, and for installing larger front parts.

After assembling the panel, you can begin installing it. To do this, you will need to fix the decorative element on the doors of the dishwasher and screw pre-prepared screws into it.

Electrical connection

Attention! Carry out all electrical installation work with the power supply turned off. Check the position of the machine switch. To be absolutely sure, use an electrical tester.

Use special plastic plugs to connect electrical wires. They are usually included in the package.

Power connection sequence:

1. Unscrew the electrical cover latches on the rear of the machine.
2. Connect the wires. Be sure to connect the ground wire.
3. Put on protective plastic caps. Simple electrical tape is not suitable.
4. Reinstall the electrical cover.

All. You have fully connected the dishwasher. Now push it into the furniture niche and secure it. Turn on the electricity and water. Check functionality. You should be fine.

Source: https://remontonly.ru/kak-ustanavlivat-vstraivaemuyu-posudomoechnuyu-mashinu.html

DIY installation of a built-in dishwasher: protecting the countertop

All dishwashers have one design feature that leads to damage to the countertop during PMM operation. Dishwashers produce steam and moisture that rises and impacts the countertop. This happens when the door is opened.

In order to protect the countertop, you will need to install protection from steam and moisture. For this purpose, various materials are used, such as film, plastic, metal sheets. In order to protect the tabletop from moisture, you can use tape.

You can protect your countertop by installing special protection against steam and moisture.

The machines that are produced are equipped with special plates made of metal. The Bosch dishwasher installation instructions will help you find out what steps need to be taken to install the plate.

Products from other well-known brands can also be equipped with plastic or metal plates, but film is more common. It is glued to the bottom of the tabletop. After installing the protective material, the side gaskets are installed and the height of the machine is adjusted.

How to install a dishwasher: what else needs to be considered

A special niche can be located in the kitchen, prepared for the integration of other appliances (oven, microwave, etc.). It can be used to install PMM. But only a compact device will fit into a small niche, which is worth considering when choosing it. If furniture with a free cavity is located far from the sewerage system and water supply, then you will need to prepare flexible hoses for connection.

Combined units of equipment can also be integrated into the kitchen set. For example, stoves with dishwashers are very popular. They are quite easy to install in a modern set, but problems may arise when installed in old kitchen furniture.

It is recommended to install a product with adjustable legs in the fully lowered position

What other installation aspects should be considered? At the installation stage, it is necessary to ground the dishwasher. There is also a rule that prohibits placing PMMs in close proximity to the hob. If the kitchen has quite a lot of expensive equipment, then experts recommend taking care of installing a stabilizer.

Helpful information! Do not forget about the need for installation instructions for the dishwasher. Bosch, Electrolux and other large companies describe in detail all the nuances of installing and using their equipment.

It is recommended that the unit, which has adjustable legs, be installed in such a way that it is lowered all the way. It is advisable to install a separate socket to connect the dishwasher to the mains, since the power of this device is quite high.