How to Make a Phone Stand From Plywood Drawings With Dimensions • Wooden Stand

Cardboard stand

Most likely, every user in childhood cut out various figures from cardboard, and now it’s time to remember the old days again and take up the stationery and build a convenient stand for the tablet with your own hands.

The image above shows a schematic drawing that you can change to suit a specific device - this is a kind of template, but no one forbade you from imagining.

Be sure to take thick cardboard, it’s best suited for packaging boxes of household appliances, unless of course you don’t mind.

Now we transfer the drawing to cardboard and carefully cut it out, fold it in half, as shown in the image, and a convenient stand for the device is ready. Its service life is almost unlimited, every day you can do something new, the main thing is that there is more starting material in stock.

Expert opinion

Strebizh Viktor Fedorovich, leading construction foreman

To work, you will need 2 rectangular pieces of thin plywood, an electric jigsaw, fine sandpaper and a little patience. If you want to clarify something, please contact me!

Varnishing crafts

If desired, you can transform our craft by covering it with Wood Varnish, preferably colorless. Read how best to varnish a craft. Try to choose a quality varnish. Varnishing is carried out using a special brush “For glue”. Take your time. Try not to leave visible marks or scratches on the craft.

Drawings of a wooden phone stand

This option is suitable for those who need functionality without excesses. A ready-made scheme is the fastest and most convenient way. Before starting work, print out a drawing or sketch of a wooden phone stand and work with the workpiece, observing the specified dimensions.

The dimensions can be taken as a basis for constructing your own drawings

If the dimensions are not suitable, they can be changed proportionally; the main thing is that the groove continues to hold the device. Some schemes are initially designed for flagship models with a wide display - if you have a more compact device, you can safely reduce the parameters.

Paper or cardboard option

If you have origami skills, you can turn a sheet of paper into a phone holder with your own hands. To do this, 4 folds are left on the A4 sheet, dividing the space into 4 even transverse stripes. Then the sheet unfolds and is visually divided in half. Make 2 new quarter folds on each edge.

The workpiece is turned over to the other side, where the edge is folded, making up 1/8 of the length of the sheet. All that remains is to turn the sheet over, bend it first along the longitudinal folds, and then along the transverse ones. The result is a triangle with a pocket for your phone.

To make a tablet stand with your own hands, you should use cardboard. 3 rectangular parts are cut from this material. In two of them there are holes for the holder. Then the elements are bent and glued in the shape of a triangle. The seams are additionally fixed with binders.

What to consider when choosing a stand type

When planning to assemble a phone holder, you need to understand:

• whether the structure is planned for temporary or permanent use;
• does its external aesthetics matter?
• will the material support the weight of the device;
• How safe is the option for the phone and its owner;
• If we are talking about a complex and intricate stand, it is important to understand whether there is enough time and skill to implement the plan.

Having decided on these parameters, you can begin to select the optimal model.

To summarize: there are several ways to make a phone holder for your home or office. The choice of material and type of construction is determined by the parameters of the phone, as well as the preferences of its owner.

Simple and beautiful

1. First you need to bend both edges of the hanger so that they are located from each other at a distance equal to the width of the gadget. The edges are compressed with pliers until they are completely connected.
2. Make 2 folds at each end, about 3-4 cm in size.
3. At the next stage, the hook is bent at an angle of 90° and turned in the direction of the wings.
4. Then a hook is made at the end of the upper part, onto which the inner element of the hanger is hooked and fixed.

How to treat the surface → Room decoration → How to choose the right paint → Surface treatment technologies → Leveling and finishing the walls → Selecting and applying a primer → Removal from the surface → Stretch ceilings and technologies → Reviews and testimonials

How to make a phone stand out of wood

Before starting work, you need to prepare the foundation. You can process it in several ways:

• using a router - fix it on the rails, align it on both sides;
• miter or circular saw;
• with a simple hand tool for wood.

A telephone is placed on the finished block. The distance between the future recess and the back side should be a couple of centimeters greater than the length of the device.

The next stage is creating a fixing recess. It is recommended to make the groove not too deep. If you have no experience, it is better to make a rough cut, install a smartphone and make improvements until it is completely stable.

The surface of the stand is sanded with sandpaper. If you have a tool, it is recommended to round the corners - this way the stand will look aesthetically pleasing and neat, even in a simple design. The surface can be coated with colorless oil, or given the desired shade.

Simple phone stand for wooden table

The basic version looks the most minimalistic - the device will be small and universal. Wood is a classic material, so the product will fit into any interior; the stand will look good both at home and on the office desk.

Advice! A simple wood phone stand project is the best way to practice. You should not take expensive types of wood as a workpiece; an ordinary beam or board will do.

You can focus on one phone model or several devices. For example, make cross grooves along and across the workpiece. The narrow slot will fit a smartphone, and the wide slot will fit a tablet or e-reader.

Sophisticated phone holder made of wood

A complex design is a way to turn an object that is simple in its purpose into an interesting element of the interior. The stand in this case can be made of several parts. One example is a design based on the principle of a photo frame. One surface fixes the device, the other serves as a support.

There are two popular options:

1. The recesses are cut to fit the size of the phone. When placed in the stand, the smartphone looks like a glove - the screen is flush with the wooden surface. Additionally, you can make a recess for the charging cable. The stand looks impressive, but requires careful preparation - the dimensions must match perfectly. It is difficult to make it without a router the first time - numerous modifications will be required.
2. Two planks are placed at an angle. One serves as a support for both the entire structure and the bottom of the phone. The second is installed obliquely. One of the advantages is that the stand can be made wide, suitable for any devices; holders for accessories or office supplies are placed in the free space.

When preparing for work, special attention should be paid to the final processing of the product.
The workpiece is initially selected from high-quality wood species - for example, to match the shades of the interior. The surface is treated with impregnation and varnish. Attention! When working with paints and varnishes, you must follow the safety rules indicated on the containers.

Original phone stand on a wooden table

The vertical surface can be further highlighted by giving it a bizarre shape - as much as your imagination allows. If you have tools and a piece of sufficient thickness, you can make it in the form of a hand holding the device.

You can detail the holding part in any way - give it an interesting shape, decorate it

The functionality can be expanded and slots can be made for other small devices - a holder for a watch, a stylus. Wood is easy to process, so there will be no difficulties in improving the design.

The finished phone stand can be painted and a logo applied using a laser or burner - a way to turn the product into a custom work of art.

Stripping plywood

We clean our plywood with sandpaper. As you already know, “Medium-grained” and “Fine-grained” sandpaper is used for cleaning plywood when sawing. You've probably seen sandpaper in hardware stores, and that's what we'll need. In your work you will need “Coarse-grained”, “Medium-grained” and “Fine-grained” sandpaper. Each of them has its own property, but a completely different coating, by which it is classified. “Coarse-grained” sandpaper is used for processing rough plywood, i.e. which has many defects, chips, and cracks. “Medium-grained” sandpaper is used for processing plywood after “Coarse” sandpaper and has a slight coating. “Fine-grained” or otherwise “Nulevka”. This sandpaper serves as the final process for stripping plywood. It gives the plywood smoothness, and therefore the plywood will be pleasant to the touch. Sand the prepared plywood in stages, starting with medium-grain sandpaper and ending with fine sandpaper. Sanding should be done along the layers, not across. A well-polished surface should be flat, completely smooth, glossy in the light and silky to the touch. How best to prepare plywood for sawing and which sandpaper is best to choose Read here. After stripping, check the plywood for burrs and small irregularities. If there are no visible defects, then you can proceed to the process of translating the drawing.

Useful tips

Several recommendations will help you avoid difficulties during your work:

• The phone is prevented from sliding by installing a small locking bar;
• Sanding the entire stand is not necessary, but rough spots under the phone will scratch the body or case;
• before creating a complex stand, it is worth making a draft - a rough layout, to determine the exact dimensions and possible errors;
• the groove in the workpiece is made to a depth of no more than half of the total thickness.

As with any craft made from wood, you may not get the phone stand right the first time. The most common problem is an incorrectly sized indentation that prevents the phone from holding. There is nothing scary about this - a bad experience will help in future work.

Advantages

Coasters of any type are one of the most popular homemade products in a modern home. They are needed everywhere: in the kitchen, in the workshop, at the desk and even in the bedroom. Stands help organize your workspace, provide convenience and comfort, and also protect furniture from accidental damage.

Any material can be used to make stands, but often home craftsmen use wood. The advantages of structures directly follow from the properties of the material:

• ease of processing of workpieces;
• low cost;
• beautiful appearance of the product;
• durability when properly processed;
• functionality.