Desk for two children - 70 photos of interior design

If two children have one common room, then you need to decide which table is best to buy for the nursery. A desk for two children is needed so that they can study spelling together and not distract each other, and each should have their own space for comfort.

Moms and dads immediately face a large number of tasks: how best to place tables, where to hang shelves, where to put chairs and shelving, what would be convenient and comfortable in the children’s room?

People who have already gone through these questions have come up with many ways to solve all these issues; for this you just need to read and choose the most suitable one.

The table is placed by the window

Basically, in a children's room, the window takes up most of the wall. Because of this, a good solution would be to place tables for the guys in front of the window. With this arrangement, the children will be able to observe the world around them through the window, which is very useful.

It is better to purchase hanging shelves.

Design

Structurally, models can be right-handed, left-handed, or symmetrical.
For children with a small age difference, it is better to purchase symmetrical options, then each child will have equal conditions for activities. Asymmetrical furniture (letter G) is suitable for children with a noticeable age difference. Most of the surface will be occupied by those who have to be more active. Often, two equal workstations are organized at an asymmetrical table, and a monitor or other equipment is installed on the remaining part of the long tabletop. Sometimes there are specific angles or non-standard situations when furniture has to be ordered according to individual sizes. For example, the room has a furniture set (wall) with a small computer desk designed for one student. Over time, the second child grew up, and the need arose for another workplace.

In this case, a section of furniture with a table should be placed at the beginning or end of the set, a small tabletop should be removed and a corner surface of the table should be ordered according to your own sketches and dimensions. Thus, a large L-shaped table is obtained, one part of which lies on the cabinets of the furniture wall, and the other rotates, creating an angle and resting on the legs of chrome pipes.

If the room does not have enough storage space, you should think about purchasing a corner table with such sections. The corner will be occupied not only by the tabletop, but also by a superstructure above it in the form of a shelving unit, closed and open shelves. Under the table there may be cabinets with drawers, closed shelves, as well as space for a computer and a pull-out shelf for a keyboard. Some models are equipped with mobile cabinets on casters; they can be easily removed from under the tabletop and rolled to any other place.

Table for kids on one line

This method of arranging tables is suitable for a rectangular room. Here you just need to decide which wall is better and more profitable to place the tables; to do this, pay attention to the lighting. But under any circumstances, additional lamps are needed on the table.

Decorating a children's room with tables along the wall is the most common option. This method is convenient, because shelves can be made right next to the workplace. To divide the distance between two tables, you can put a cabinet. This way, the guys won't distract each other.

Video description

The video details growing transformable desks and chairs for schoolchildren:

When the issue of saving space is acute, you can think about installing a folding table. Its design does not take up much space. Its base is a board that is attached to the wall, and support posts that move and move apart when the tabletop is tilted away from the wall. When assembled, children's furniture by the window looks like a narrow panel. When it opens, a compact workspace appears.

Folding table with shelves Source womanadvice.ru

Table corner

A corner desk for two children is suitable if they have a large room. It is important to make the countertops on both sides the same size.

If it is not possible to purchase a table of this type, then it is recommended to find two tables complete with a bedside table. They can be arranged in the letter “g”, and this cabinet can be placed in the space between them. Also, supplement the lighting with lamps.

A big plus for this type of table is that the chairs do not touch and the children will not see each other and interfere accordingly.

Along the window

For those who have a wide window in the nursery, placing double desks along the window is suitable. True, there are some nuances that should be taken into account:

• placement of radiators;
• availability of sufficient room lighting;
• the need to provide the child with several shelves and drawers for notebooks and other student stationery.

The tables are at an angle of 90 degrees to each other

Unusual location. This method is quite convenient and will have a good effect on the children’s classes. It is better to place one of the tables by the window.

If the bed is made high, then placing a table under it is an ideal solution. This option is very convenient for children, and also beneficial for parents, saving space and money.

Only this option may not look very nice if the room is narrow and long. So, this option will have to be replaced in a few years, when the children grow out of this table.

Along the wall

If you have enough empty space along the wall, then you can think about placing a large school table directly below it.

In this case, for the convenience of the child, the following must be provided:

1. Availability of sufficient natural lighting. For a right-hander, the rays should fall from the left, and for a left-hander, vice versa.
2. Place hanging shelves for books on the wall.
3. Try to divide the space between those sitting using a pencil case or bedside table.
4. Take care of high-quality artificial lighting.

The photo shows the most successful children's table in a bright design.

Design Features

Using one desk designed for two children, you can organize 2 workspaces at once. In a small room it is almost impossible to install a couple of separate desks. One large tabletop will be a real salvation in this case.

When choosing a suitable option, you need to pay attention to the design features:

• the working surface should be large so that schoolchildren do not experience discomfort;
• It is desirable that children's tables be equipped with separate cabinets, drawers for books, and stationery;
• the optimal models are those whose sizes can change in accordance with the child’s growth;
• complete lighting for each user, lamps will be required.

The standard width of the working surface for two schoolchildren reaches 1 m, the minimum depth is 0.6 m, the optimal space for placing hands is 50 x 50 cm. Furniture parameters depend on the height of the children:

• 85–100 cm – optimal dimensions – 60–110 x 45 x 30–40 cm (length, width, depth).
• 100–190 cm – suitable dimensions – 60–120 x 50 x 40 x 50 cm.

A well-chosen children's table contributes to the correct distribution of the load, maintaining the health of the spine and beautiful posture. There is one more rule: the end of the tabletop should be at the level of the child’s solar plexus.

Height selection

If we talk about the growth of a child, then when choosing a desk you should be guided by the following parameters:

It is important that schoolchildren sit correctly at a desk for two children, since incorrect body position can cause problems with posture:

1. When a child is sitting, his chest should not touch the edge of the tabletop; moreover, a child's fist should pass between them.
2. With the correct height of the table and chair, the elbow of a straight outstretched arm should be 5 cm below the table.
3. It is necessary to bend over the work surface as little as possible.
4. When sitting, your knees should form a right angle, as should your hips and lower back. The feet should be firmly planted on the floor or on a special stand.
5. The correct position on the chair means that the back rests completely on the backrest and forms a right angle with the hips. Elbows should rest on the surface of the tabletop.
6. When working at a computer, there should be at least half a meter between your eyes and the monitor. It is necessary that the gaze falls from above, at an angle of 30 degrees. The monitor must be installed in the center of the viewing area.
7. When writing to a right-handed person, it is necessary to place the notebook to the left, and to a left-handed person to the right, 30 degrees. This position will allow you to avoid turning your torso.
8. When reading, you need to slightly tilt the book towards you, so the body can independently take a natural pose and relax the muscles of the back and neck.

If the desk is intended to be used by two children of different ages and heights, then you can purchase special adjustable footrests. With their help, you can subsequently easily adjust the correct body position at the table. In addition, you can give preference to special chairs with height adjustment and a built-in footrest.

Organization of a combined work area

Although the phrase “corner table” seems very clear and describes a very standard design, inventive modern designers have come up with several completely different shaped solutions that suggest different relative positions for children when working at such a table.

The classic option is when two parts of a corner table, located at an angle of 90 degrees to each other, are exactly the same in size. At such a table, two children sit with their shoulders touching, but they are turned in different directions. The computer, as well as storage boxes and shelves, simultaneously separate their functional areas and unite them, since they are common, while being easily accessible for both kids.

As an alternative, parents can choose two corner tables at once, placing them in opposite corners of the room - then each of the children will have their own, independent work area, and one of the wings of each table, accordingly, can be significantly shortened.

In rooms of relatively small width, models shaped like the letter C are highly popular. As children grow, experts recommend choosing models from the table, however, corner designs extremely rarely allow such an option. In fact, these are the same two corner tables located in adjacent corners, however , united by a common building. At such a table, children sit with their backs to each other - this allows each of them not to be distracted by the other. Among other things, such tables are also very good because they ensure uniform access of natural light from the window to the work areas of each child.

There is also a type of two-corner table in which the parts directed deeper into the room are trimmed - then each of the corners is a personal computer desk with add-ons and shelves for one of the kids, and the tabletop connecting the two corners is a wide common desk.

Design and materials

When choosing a desk for children, you need to focus on the general style of the children's room. But at the same time, preference should be given to laconic, convenient and comfortable models. Excessive decor and pretentiousness are inappropriate in this case. In terms of design, it is better to choose the most neutral models.

The color scheme should be combined with the shades already available in the room. If there is a large age difference or for children of different sexes, it is permissible for work stations to be of different colors, compatible with each other and with the color scheme of the room. It’s good if the fittings of the product are in the same style and color as the rest of the furniture in the room.

When choosing a desk for a children's room, you can give preference to pastel colors. Pink, blue, greenish shades are acceptable. Light brown, sand paints or wood-look options are available. You should not choose dark colors, they will overload the appearance of the room.

Nowadays the furniture market offers products made from various raw materials:

1. Wood is a natural material. The advantages of such a base include environmental friendliness and durability. Wooden models look decent and are easy to use. Hard woods are resistant to damage. The disadvantage of such a product is its high price.
2. Wood derivatives (chipboard, MDF, etc.). Such pieces of furniture have a shorter service life and are susceptible to moisture. Their surface wears out and peels off quite quickly. The advantage is low cost.
3. Plastic furniture is comfortable and light. The cost of such models is low. However, over time, this material releases harmful substances into the air. In addition, such products are fragile, easily scratched and, as a result, look unpresentable.

A table made entirely of wood can look bulky. It is better to give preference to a model with a wooden tabletop and metal legs. This product is best suited for a children's room.

Tree

MDF

Plastic

laminated chipboard