Repairing a glass table is not an easy procedure. The fact is that, due to its transparency, the glass table shows all the mistakes that you may make while working. For this reason, you must act very carefully. The most popular problem among owners of such a product is getting rid of scratches. In order to avoid this, you need to properly care for the table.
Removing scratches from a glass table
Glass table (option 1)
Glass table (option 2)
Glass table (option 3)
Glass table (option 4)
Glass table (option 5) Glass table (option 6)
If you want to remove scratches and scuffs from glass, you can't do without valuable advice. Scratches spoil the appearance of the product, which had a neat appearance before this unpleasant incident.
1. Try toothpaste
2. Try an ammonia solution
3. To remove deeper scratches
4. You can try jewelry polishing paste and disc
How to remove hated defects? First, prepare GOI paste. This special glue is sold in automotive stores. Pasta is sold by number. For glass products we will need the first or second number.
In order to get rid of cracks in glass, you need to grind the paste until it becomes crumbly. At the same time, it must be given homogeneity. Polish out any imperfections. In order to remove them, you need to dip a cotton swab into the crushed paste. You need to polish the scratches carefully, without pressing the stick. The procedure is repeated several times, and its duration is about ten seconds. Once polishing is complete, remove excess paste from the glass.
Stages of work
Installation of countertops made of chipboard or MDF is carried out in stages. The work is carried out in a clear sequence. Before you begin, you should carefully read the practical guide.
Preparation
The base is positioned so that the front wall of the floor cabinet is strictly parallel to the edge of the tabletop. Markings for fitting begin with the apron. The edge of the adjacent slab should lie in the same plane as the facade. Next you need:
- Trim the edge taking into account the roughness of the wall.
- Make recesses for the pipes.
- Make cutouts for the sink and hob.
- Fasten and align to the base along the façade so that the tabletop protrudes forward by 35–45 mm.
Pruning must be done carefully, accurate to the millimeter. You can use a power tool. After this, you need to prepare the fasteners for the base of the kitchen table.
Trim edge
Make recesses for pipes
Make cutouts for the sink and hob
Fasten and align to the base along the façade
Joining parts
This stage is needed if the tabletop is prefabricated. Its fragments are combined into a single monolith. Where there are joints, screeds are made. Step by step sequence:
- Glue the ends.
- Connect the parts, lay and secure the ties.
- Polish the joints.
- Strengthen the seams.
For work you will need aluminum strips. They come in corner and connecting types. Self-tapping screws are used for fastening.
Glue the ends
Connect the parts, lay and secure the ties
Polish the joints, strengthen the seams
Installation of the canvas
Before installing the countertop, you should cut holes for the hob and sink. To do this, you can use a ready-made template. It is usually included with the instructions. Step by step guide:
- Place the tabletop on the cabinet.
- Level it up.
- Fix the plate in a stationary position.
- Secure with corner brackets.
To simplify the process, it is recommended that two people perform this step. An assistant should press firmly on the tabletop. This is necessary to make it easier to fasten it with screws.
Place the tabletop and level it
Fix the plate in a stationary position
Pin
Installation of skirting boards
The plinth performs a decorative function, covering the joints on the kitchen table. It also reliably protects them from moisture and mold. This element is glued or screwed using self-tapping screws. Step-by-step instruction:
- Measure the required length of the plinth and cut it.
- Treat the installation area with silicone to protect against moisture penetration.
- Install the profile, securing it with self-tapping screws.
- Cover corners and joints with decorative trims.
If you decide to use glue, the base must first be degreased. After this, the profile is attached. The rest of the steps are exactly the same.
Measure and cut to desired length
Treat the installation area with silicone
Install profile, close corners and joints
Repairing a wobbly table
Glue the legs
In order to repair a table leg that is wobbly, you need to understand the fasteners. The legs of the table were glued at the factory with a special glue, which may dry out over time. If the legs are secured with dowels, screws, screws, etc., they can simply be unscrewed and replaced. The legs can be glued if the tabletop is attached to them with adhesive bonds. In order to get to the damaged elements, the table is turned over in disassembled form. The screws are unscrewed from the tabletop itself. If a crack has formed on the leg under the tabletop, it can be glued. Place glue into the crack and cover it with a countertop.
If the glass tabletop is on a wooden frame
Glass table on wooden legs
We completely disassemble the base
We clean the old dowels from the old glue, apply new glue and put it in place
We can secure the loose leg with this tie
Screw the pin into the leg and tighten the tie plate into place with self-tapping screws
You can strengthen the connections with metal elements. Give preference to the dowel. Insert one end of it into the cleaned hole, and sharpen the other so that it fits smoothly into the connection. Now you need to assemble the product. If you have never assembled it before, watch the video.
Tempered glass for countertops
Do you dream of becoming the owner of an exclusive piece of furniture? With the company “Sklad skla” it’s easy! You just need to place an order for a glass tabletop made according to your individual sketches. This can be done by phone, or by leaving your request on the website for our managers to calculate the cost.
You can order and buy patterned and corrugated glass using the online price calculation form depending on the size and processing of the material.
Submit your application and our specialists will contact you as soon as possible to clarify details.
Do you need to replace cracked glass on your desk? Our company will produce this element of any shape and size for you.
Call us, we will definitely solve your problem and help you make a choice.
Glass table care
Taking care of a glass table
In order for the product to serve you as long as possible, it will require proper care. How to care for a glass table? First you need to figure out how to protect it from damage. If you cleaned the room, the table must be set. This will protect it from dust and possible damage. It is necessary to find a special approach to the glass table - wipe it with special compounds, protect it from exposure to direct sunlight and temperature changes.
If you have small children, a glass table could put their lives at risk. To prevent children from getting hurt or accidentally breaking the product, move the table away from children's games. It is best to install a glass table in places where it will be least exposed to household occupants. Pets are another risk to the existence of glass products. Fluffy fidgets can both break and scratch the table. For this reason, it is better to keep them away from the product. As you can see, if you properly treat a glass table, this piece of furniture can serve you for many years.
Why defects form
Often, after purchasing a spectacular interior product, buyers are in for an unpleasant surprise: the glass table gets scratched. Tempered glass is resistant to shocks and high temperatures, does not form sharp fragments when broken, but is not resistant to chips and cracks. Common reasons for their appearance are:
Damage to the countertop due to improper care is not considered a warranty claim. A product that has defects even after the first lunch cannot be returned to the store, citing insufficient quality.
Causes of chips and scratches on glass
Glass requires careful and careful care. Here are just a few reasons for scratches:
Ways to eliminate minor scratches
To combat minor scratches and cracks, you can use the following methods:
Colorless manicure varnish.
The surface of the glass should first be prepared; it should be thoroughly and carefully washed and dried. Then the scratch and the area adjacent to it are treated with an alcohol cleaner or with the addition of ammonia for degreasing. After drying, apply colorless varnish to the scratch or chip and allow it to dry completely. Using a cotton swab moistened with nail polish remover, carefully remove all excess varnish on the surface of the glass and polish the surface with a soft rag.
2. Polishing agent for metal surfaces.
This method is a little more expensive, but it is much easier to do. Apply a small amount of the product to a soft cloth and polish the scratched area on the glass. After several wipes, the scratch will not be noticeable.
Toothpaste.
To remove a scratch, use a simple white paste without any additives or effects; gel is not suitable for this purpose. A pea-sized amount of paste is applied to a soft cloth and rubbed into the scratch with gentle circular movements. Thus, the scratched area is treated several times, removing the remaining paste with a soft cloth after each procedure. The scratch disappears without a trace.
Toothpaste - this is perfect in cases where the scratch can be seen in the sun, but cannot be felt with a fingernail. At least it's much more decent than gel. It is important that the entire surface is completely clean. Moreover, lint-free fabric is preferable. You need to smear it along the entire length of the scratch, and then wipe off what remains.
If the nail gets into the groove, you can try toothpaste with dry mustard and vinegar added to it. Polish with a clean cloth. If damage is still noticeable, more professional methods are advisable.
Liquid polish for car body work or furniture polish.
The surface treatment method is slightly different from the previous one. The polish is applied directly to the crack and to a piece of fabric. And all glass is carefully polished.
Paste GOI.
An exceptional product for removing minor damage to glass surfaces. A small amount of paste is scooped into a spoon and heated to a liquid state. A felt cloth is soaked in the liquid paste and gently rubbed directly into the scratches. In a few minutes the glass will be without damage.
If the scratch cannot be completely removed, you can use stained glass film; it will make the window interesting and hide all its defects. It will not be possible to remove a scratch that is too deep using these methods; most likely you will have to replace the glass or accept the damage.
How to avoid damage to glass
To prevent scratches from appearing on the glass, you should treat them very carefully and follow preventive measures:
Methods for removing deep scratches and damage to glass
After identifying a deep crack or scratch on the glass, you should try to fix it as quickly as possible so that it does not go further and the glass does not crack. After carefully examining the location of the damage, you need to determine the possibility of eliminating the crack or chip. In some situations it is easier and cheaper to order new glass. If the crack reaches the edge of the glass, it cannot be repaired. If the nature of the damage allows the crack to be eliminated, then repairs can be made using the methods described below. These methods are also suitable for repairing cracks and chips in car windows.
First you need to carefully examine the damage, determine the width and depth of the crack, whether it is through or not. To prevent dirt from getting into damage to the glass, it can be sealed with tape.
For more thorough repair of cracks, photopolymer glue is used. Many manufacturers of such glue offer car owners ready-made kits for repairing cracks based on photopolymer glue and additional accessories for its application and drying. If you have doubts about your abilities, it is better to contact specialists.
Technology for repairing deep cracks in glass using photopolymer glue:
You can also remove a crack in the glass with silicone glue; this is a fairly durable and reliable method. To do this, you need to mix polystyrene foam, turpentine and acetone, and apply the resulting transparent mixture to the crack. A small crack, as described earlier, can be sealed with ordinary transparent nail polish, this will prevent it from growing, or in any other way described above.
Source
