How to remove scratches from a mirror: is it possible to eliminate minor and deep damage yourself, using what means?

Mirrors are presented in the design of any apartment.
They not only perform their direct function, but also decorate the interior, visually increasing the space. During use, scratches may appear on the reflective smooth surface. Such defects spoil the entire impression of the mirror and require elimination.

We will tell you in the article whether and how to remove scratches from a mirror.

Variety of options

Before you start attaching the mirror to the cabinet yourself, you need to understand the design features. Standard straight-format devices can be equipped with two, three, or four leaves. Built-in products are installed in wall niches. This arrangement method saves space. Often such models do not have a floor or roof. In this case, the cabinet shelves are fixed directly to the wall.

What you need to remove a crack on a mirror with your own hands

If a mirror cracks, it always upsets the owners. The search for a solution to the problem begins. There's just one caveat. It will not be possible to completely remove a crack in the glass. At home, not a single available remedy will help with complete restoration.

Some try to correct the situation with sanding, foil or even toothpaste, but all this will not make the crack disappear, but will only mask it for a while. For some, this will be an excellent way out of the current situation.

The question often arises - how to decorate a crack in a mirror with your own hands.

It is dangerous to carry out complex work at home, since a mirror is a rather whimsical object and only loves careful professional handling. But you can always find a way out of any situation.

If you can’t remove the crack, you can decorate it beautifully. This will not only save the mirror, but also refresh the interior. This may require various materials.

The most common techniques used for decorating a reflective surface are stencil designs, or their framing, the craquelure method, applying various designs and interesting frames. As you can see, there are really many ways and each of them is good in its own way.

Let's sum it up

Removing a mirror is an incredibly labor-intensive process, since mirrors are usually attached to cabinets so that they hang in a specific place for them even after the cabinet itself fails. It would be good if reusable fasteners were used to install the reflective surface, however, as a rule, we are talking about the use of adhesive construction substances that make easy removal of the mirror from its current location impossible. Please read the instructions we have provided above carefully. At least one of them must be suitable in your case. Then you can peel the mirror off the cabinet and place a newer model in its place.

Bathroom mirror repair

Are you planning to renovate your bathroom mirror? The mirror is the most fragile item in the bathroom and damage to it is not uncommon. For example, you accidentally hit it with something or hit it with a sharp object, and cracks appeared on the mirror. This also happens due to the fact that a large load falls on the mirror if it is built, for example, into a cabinet. Also, the mirror canvas fades over time, loses its original appearance, and scratches may appear on it. Sometimes even one small crack or scratch on the mirror spoils the entire look of the bathroom, and, of course, you want to resolve this issue as soon as possible.

If it is possible to change the mirror, then it is better to do it right away. The bathroom is one of the rooms that especially needs a mirror. But it happens that the mirror is built into the cabinet and the entire cabinet has to be replaced. And this comes out expensive. Or the mirror is of some value, and it’s a pity to part with it. Therefore, in some cases, repairs are justified.

Causes of wear

Sometimes, after several years of service, we notice that the mirror does not reflect well and some spots appear. Turning the canvas over, it turns out that the coating has been torn off from the back side. It's called amalgam.

This coating can come off for various reasons. And these are not necessarily the consequences of scratches and mechanical stress. Amalgam also begins to slip if normal air circulation on the inside is disrupted. If you see transparent spots on the reflective side, you should think about gluing the mirror correctly or choosing a different place for it.

The production of mirrors is technologically quite complex. To create a reflective surface, a thin layer of metal, supplemented with special additives, is applied to the reverse side. Metal microparticles are gradually applied to the surface, often in several layers.

It will not be possible to achieve the same effect at home without special industrial equipment. Therefore, if your antique mirror in a wooden frame has worn out and lost some of its reflective properties due to peeling amalgam, partial restoration will be required.

No one is stopping you from giving the product to a special company, where they will do professional restoration. But it is very expensive and not every city has such specialists. The cost of the service sometimes exceeds the price of the mirror itself. First, you should try to perform the procedure yourself, at home.

Practice clearly shows that it is possible to restore a surface using available materials, and the result often exceeds expectations.

How to prevent scratches and cracks

So that you don’t have to look for steps to remove many scratches, you just need to carefully prevent their occurrence. This can be done using simple recommendations:

It is worth purchasing a bumper or case that will protect not only the back panel of the phone, but also the top. Such cases are not sold in every store. They resemble a folding bed;
It is necessary to use a protective film, or better yet, glass;
You cannot carry your phone in the same pocket with keys or other metal items;
You should not give your phone to others if you are not sure of their accuracy.

These four simple rules will help avoid deaths.

How to close a door with glass?

How to darken glass in an interior door

Cover it with self-adhesive film, which can be purchased, for example, at a wallpaper store. ...
Use film to tint car windows or windows (the downside of this method is that it is not cheap).
Buy glass paints at any office supply store.

Interesting materials:

How to cook raw milk mushrooms? How to use iodine during radiation? How to take amino acid tablets? How to take BCAA before training? How should girls take BCAA capsules? How to take coenzyme q10? How to take collagen in liquid form? How to take Leuzea? How to take lysine for herpes? How to take melatonin tablets?

What are the advantages of do-it-yourself mirror restoration?

There are several simple ways that anyone can do.

Not everyone immediately decides to restore a mirror with their own hands. This most often occurs due to ignorance of all the advantages of this process. But independent mirror restoration has a lot of positive aspects that can encourage you to carry it out. These include such aspects as:

In small towns, or even villages, you can rarely find a master who can properly repair a mirror. Not everyone can restore amalgam. Decorating small flaws yourself is much easier than looking for a specialist restorer of this profile.
Repairing damage to a cracked mirror is not a cheap pleasure. Most often, such a procedure will cost more than buying 3 new mirrors. And decorating with your own hands involves spending only on a minimum set, which often consists of one stencil.
If a crack on a wooden surface can be easily covered with wax and this does not require special skills, then restoring glass is a completely different matter. Therefore, again, it is much easier to repair the crack with an interesting pattern that would match the interior. This definitely doesn’t require any special skills or knowledge, just paint and desire.
It's no secret that a small scratch can turn into a big chip. This most often happens due to the transportation of the mirror to the workshop. And when the piece of furniture has already been delivered, it turns out that it cannot be restored. It is for this reason that it is better to leave the structure in its original place and take advantage of interesting ideas for independent restoration.

Even a slight blow is enough for a crack to appear on the surface of the mirror.

Is it worth trying to repair?

The question is really important and relevant. First, assess the extent of the damage. An impressive proportion of windshield defects make it possible to avoid the need to replace the product. Many windshields can be restored.

When the damage is serious, the crack has spread across almost half of the glass, or the chip is more like a hole, the repair will be pointless and useless. You shouldn't even try to restore such defects. You will waste your energy, time and money on materials. And even if someone undertakes the repair, the price will be higher than the cost of a new windshield for your car. Therefore, think twice and objectively assess the situation.

If an assessment of the car’s condition makes it clear that it makes sense to buy a special product, pour in polymer and restore the surface, then get to work.

Mirror mosaic on the fence

What could be better than turning an ordinary fence into a work of art? This mosaic mirror fence is definitely one of the most creative things I've ever seen. And it's not as difficult to do as you think. Even if you don't have enough shards, you can buy old cracked or otherwise damaged mirrors for next to nothing and create a piece of art out of it in your backyard.

Method No. 3 Wardrobe decor with full-color posters

Wardrobe doors with photo printing are not a cheap pleasure. Color posters based on vinyl film are much more affordable and often look much better. This is achieved through high quality printing. You can paste a poster on one of the doors or make a composition on all panels of the wardrobe.

Drawings on color posters can be very diverse: from abstract figures to your own photographs of memorable places. They should be applied like regular vinyl stickers.

Frame

An original frame will help hide the damaged area on the mirror. You can use various materials for it: glass balls, buttons, beads, shells, flat stones, etc. The selected parts should be glued along the edge of the mirror so that the defect is covered. In this process, it is important not to get carried away and not to overdo it with the number of elements so that the frame looks organic.

What to do if the mirror is cracked: how to safely get rid of a cracked mirror

It’s good if the mirror never breaks in careful hands. However, for the most careful owners, it can unexpectedly crack on a cabinet door, in a large frame, or in a small cosmetic bag. Sometimes, when sorting out dacha “stocks” or things left over from previous owners, people come across a darkened antique mirror in a frame. And also with a mirror product that had a large part that had broken off.

Bewilderment arises: what to do with this thing that has already served its purpose. Questions and doubts are not random. On the one hand, signs and warnings associated with a broken mirror come to mind. On the other hand, the correct technology for eliminating breakable items or fragments is of concern.

Mystical "through the looking glass"

Beliefs about the mirror arose a long time ago. Reflection is the information that people looking at it receive. Reflection is always important.

Fortune telling makes it possible to see something more in the displayed world. Many myths and fairy tales tell about what happens on the other side of the plate glass. The most famous magical images associated with mirrors:

endless reflection;
cracked or broken;
curtained;
inverted:
reflected candles.

Some people are helped to concentrate by the simple act of looking at their reflection when forced to return after leaving the house. It is especially carefully studied by people with mystical intuition that one should not do in front of a mirror, where it should not hang.

A cracked, broken mirror, according to old folk wisdom, portends trouble.

Reference. There is some wise advice: do not look into a damaged mirror, try not to be reflected in the swept away fragments.

Interestingly, seeing a cracked mirror in a dream is also not good. The details of such a dream tell you who to expect trouble from: strangers or loved ones.

One useful recommendation is not to become discouraged by the prediction, but to think about what this attribute was trying to warn about impending circumstances. We must look for strength and ways to resist possible everyday complications.

How to Safely Get Rid of a Cracked Mirror

If any mirror in the house is cracked, you must try to remove it in its frame from the house carefully, without breaking it into pieces. It is enough to pack it in an unnecessary piece of fabric, durable polyethylene, cardboard .

For city residents, unfortunately, the old advice - to bury this object or its fragments - is not at all suitable. But they also need forethought.

It would not be a bad idea to place such a fragile item in the safest corner near waste containers to protect it from accidental damage . No matter how convinced a person is of the validity of mystical predictions, another very real fact is also important for him: let no one get hurt by a thrown dangerous object.

What to do to avoid consequences

To neutralize the negative meaning of the sign about a cracked mirror, to protect yourself from troubles, you need to properly get rid of the mirror cloth. Esotericists advise the following:

Perform a ritual on the waning moon.
Before throwing away a mirror that has cracked due to a fall or by itself, it should be placed glass side down for a week.
Rinse the item under running water to remove the information stored in the mirror surface.
It is recommended to take the item to the landfill in the dark and alone.
The abandoned item should be sprinkled three times on all sides with salt blessed on Maundy Thursday.

An even more preferable option is to throw the item into a river or other body of water with running water.

Upon returning, it is necessary to cleanse the place where the reflective surface previously hung from bad energy. For these purposes, you can use candles or incense.

Superstitious people who are alarmed by a broken or cracked mirror should perform a simple ritual that can completely eliminate all possible adverse consequences of this incident. The item must be carefully washed with water, christened three times with a church candle, and then say a prayer, ask for forgiveness and say goodbye to the worthless item.

If the mirror is cracked, signs warn of illness, loss and separation. By performing a cleansing ritual and getting rid of the damaged item, you can neutralize the negative consequences of the incident and avoid possible troubles.

Preparing for restoration at home

Before you begin restoring the mirror surface, you should perform preparatory steps. The preparation process depends on the type of mirror and the size of the existing defects.

For larger damage

If the mirror is inserted into the frame, in order to more conveniently restore the surface with large defects, you should remove it from the structure. To do this, use a small hammer and screwdrivers to unscrew the fixing screws and remove the hammered nails. In cases where it is impossible to remove the product from the frame, it is recommended to place the entire structure on a flat and hard surface to prevent movement from its original position.

Minor repairs

When planning to get rid of minor and unnoticeable scratches, it is enough to wipe the surface from dirt to better see the damaged areas. It is not necessary to remove the product from the wall, which greatly simplifies the task.

Step-by-step instruction

How to restore a mirror with large amalgam damage?

You need to carefully remove the mirror from the frame and place it on a table covered with a soft cloth. Thoroughly clean the damaged surface with a brush. Then wash with glass cleaner and dry. Now degrease the damaged area with gasoline or alcohol and dry again. Using scissors, cut a piece of foil slightly larger than the size of the damaged area. Apply glue to the treated area of the mirror, apply the foil with the shiny side down and press. Use a napkin to smooth the surface of the foil from the center to the edges. Carefully remove excess glue with a sponge and dry the mirror for several hours. Place the restored mirror back into the frame.

How to repair a crack in a mirror with your own hands

Not everyone knows how to repair a crack in a mirror with their own hands. There are several ways to fix the problem. To do this, you will need a minimum set of tools, a little time and desire to bring the mirror into proper shape.

You can try to disguise the crack using various decorative elements.

Important! Since the methods involve the use of decor, you need to choose the right one for your interior.

How to remove using stencils

Stencils are a universal thing that can save you in different situations, and a crack in glass is no exception. There are many variations of stencils and they will suit every interior. To bring the idea to life, you need to purchase brushes of a suitable size, acrylic paints, a simple pencil, a regular sponge, masking tape, acetone (you can use nail polish remover) and, of course, a patterned stencil.

One of the most effective and simple ways to disguise small cracks in a mirror is to cover them with paint.

You can use this method as follows:

Preparation of the workplace. It is necessary to lay out all the tools and materials in front of you at once so as not to be distracted by missing ones. Everything should be conveniently located so that work does not cause discomfort.
It is more convenient to use ready-made stencils purchased in the store. If you wish, you can make them yourself. To do this, you will need the selected pattern and thick cardboard that will not allow paint to pass through.
Before applying paints to the surface of the mirror, they are checked for color matching. It often happens that the shade in the jar is very different from the applied stroke. This can be done on any piece of paper.
The stencil is attached with masking tape to the selected area. If the drawing suggests the presence of several colors. Then, for accuracy of execution, they are sealed with tape to prevent other paint from getting in. Without tape, only the place that will be signed first remains.
There are two ways to apply paint: with a brush or sponge. Many masters who have already done this note that doing this with a sponge is much more convenient and faster. After applying all the colors, you need to correct the contour. A thin brush is used for this.

Now on the Internet you can find a lot of beautiful stencils with butterflies, flowers, patterns and various ornaments.

Stencils

As you can already see, the method with stencils is quite simple and effective. Under a layer of paint, cracks and even small chips will become less noticeable. The advantage of this method is that the stencils can be different, from flowers to cartoon characters. No special drawing skills are required, since the task will only be to paint a finished drawing.

This is one of the most effective and inexpensive ways. An undeniable advantage is that the drawings can be changed whenever you want. They can be easily washed off if you use acetone.

In order for the pattern to be clear and not smudged during the process, the stencil must be firmly glued to the mirror with masking tape.

Important! If the stencil is attached to the mirror with ordinary tape, then traces from it will have to be wiped off for quite a long time and using chemicals. They, in turn, can erase the applied drawing.

Craquelure

Craquelure is one of the most popular and beautiful methods. In addition to mirrors, it is also used for aging furniture. The method is suitable for those who are not afraid to add more cracks to the mirror surface, only this time artificial ones.

As you know, it is best to hide something in a visible place. You can also hide defects on the mirror in this way.

The craquelure technique is to give the mirror texture in the form of small irregularities. This way you can not only hide the resulting flaw, but also add an independent object to the interior, which gives it its own peculiarity and sophistication.

This is done using craquelure varnish and acrylic paint. The color of the paint should harmonize well with the wall or mirror frame. Although the technique does not involve complex machinations, it still requires caution in performing all actions.

This decoration technology is quite simple, but it must be performed with special care.

The first layer of paint is applied to the mirror surface. It must dry completely. Only after this the second layer of craquelure varnish is applied. The two components will begin to interact, forming artificial cracks. The mirror is not damaged in any way. It looks very beautiful, since the mirror surface will look out through the new irregularities, reflecting the light.

Removing a crack using a drawing

The method with a pattern is almost identical to the method with a stencil. Only here you will have to come up with the plot of the picture yourself and draw it.

Anything can be depicted on mirrors. These could be trees, birds, flowers or ordinary geometric patterns. If you used acrylic paints before, now you will need stained glass ones. They are made specifically for painting mirror surfaces.

You can also cover a crack or scratches on a mirror using a drawing.

Frame

If a crack appears on the side, then it can be covered in an original way using a frame. She can be anyone. There are no restrictions in this type of decoration. The main thing is to build on the possibilities of the mirror surface. It is better to refrain from decorating with large massive objects. And they won’t look very nice on a light reflective surface.

Materials such as buttons, beads, shells, decorative stones, clothespins, textured rope threads and even antique coins are often used. The pattern is arranged in such a way as to cover all defects. For fastening, it is better to choose reliable glue.

An original frame will help hide the damaged area on the mirror.

What will you need for work?

Some tools for gluing mirrors

When performing installation, you cannot do without special materials and tools. You will need:

mirror;
degreasing composition;
devices for implementing the chosen fastening method;
sandpaper;
gun for performing installation work;
pencil, ruler.

If you plan to mount a bronze mirror, you will need to additionally take a drill, a set of drills, and fasteners.

Beautiful ways to decorate a mirror

A beautiful mirror decoration will not only cover cracks, but will also interestingly complement the interior. For this you can use any means and materials. You can often find ways to decorate using shells. They look beautiful next to the mirror surface and give it a special mood.

They are not attached to the mirror itself, but to a specially made frame that will match the shape of the mirror.

Additional Information! By decorating with filled frames, the mirror can be visually enlarged or reduced. Its dimensions will depend on how exactly to place the beautiful frame.

In addition to shells, wine bottle corks can also be used. They are also placed on the mirror in any order, creating beautiful patterns. If you want to add a little depth to the mirror surface, then the plugs are attached in their original form without cutting. A mirror framed with hemp rope looks beautiful in all interiors.

In this process, it is important not to get carried away and not to overdo it with the number of elements so that the frame looks organic.

Elimination methods

Before you begin to repair a crack in a double-glazed window, you need to choose the appropriate method. The choice largely depends on the location of the crack and the size of the crack.

If the glass is damaged in the corner, you can use glue. Of course, this method will ruin the appearance of the structure.

If a crack has formed at the edge or in the middle, then replacement is indispensable. In the future, such a crack can spread over the entire surface. The work can be done in 2 ways.

Glass replacement. To do this, you need to remove the glass unit and separate the glass. Choose a suitable canvas taking into account the thickness. Clean the surface. Connect the elements using sealant. After hardening, put the glass unit in place.
Replace the glass unit. Remove the old unit and install a new one in its place. However, they must be identical in size. This method is less labor-intensive and ensures the preservation of the insulating properties of the structure.

If it is not possible to unpack the window on site, it is recommended to remove the sash and carry out work on a prepared surface.

Requirements for adhesive for attaching rear view mirror

If you need to fix the interior rear view mirror, you should understand what influences are exerted on it while driving, and in what environment it has to be. Based on this, an adhesive is selected that can reliably fix the mirror on the windshield.

The first thing the rear view mirror, and at the same time the adhesive that holds it in place, has to deal with is vibrations. The car constantly “shocks” while driving on the road, no matter how well the suspension copes with road unevenness. Since the mirror is fixed to the windshield only with the help of an adhesive base, it fully feels all these vibrations, and the impact of them falls precisely on the adhesive used.

When choosing glue for a rear view mirror, you should immediately exclude their options “Glue Moment” and the like. Such adhesive bases are not designed to work in shaking conditions, as a result of which the mirror will not last long on them.

The second thing we pay attention to when choosing an adhesive base for a mirror is operating temperatures. On hot days, direct sunlight may fall on the adhesive base on the windshield, causing it to heat up. Accordingly, it is important that at high temperatures the “glue” used does not lose its properties. But at the same time, even in winter, when it is cold outside and there is snow on the windshield, the adhesive base must hold the mirror firmly.

Taking this requirement into account, there is no longer the option of attaching the rear view mirror to double-sided tape, the adhesive base of which loses its properties at high temperatures.

Another condition that you should pay attention to is the possibility of stripping the surface of the adhesive if necessary , for example, if the mirror comes off and has to be reattached. Double-sided tape, as well as “Glue Moment,” will be quite difficult to clean from glass.

Glue for mirrors. Kinds

ON A NOTE! To do the job efficiently and effectively, you need to prepare a certain set of tools, study in detail the instructions for using the appropriate product and put in just a little effort. Next, we will try to understand this issue in more detail.

"Soudal 47A"

Considered one of the best solvent-based adhesives, produced in Belgium. Used for gluing glass and mirrors. Reliably adheres to concrete products, brick, ceramic tiles, mirror mosaics, as well as to plastered surfaces. One package contains 300 ml of substance.

Advantages - the solvent and synthetic rubber included in the adhesive promote gentle gluing of surfaces, without destroying the amalgam. Operating temperature – from -20 to +60 °C. The mixture can be used in rooms with high air humidity as a sealant; it hardens very quickly.

Disadvantages - a specific smell can be noted. Not recommended for use with polypropylene and polyethylene.

"Bison Mirror Adhesive"

Universal liquid solution based on silicone, manufactured in Holland. One of the main characteristics of this glue is its rapid adhesion to the surface (5 minutes), but complete drying occurs only after 3 days. Available in 60 ml packaging, but quite economical. The price of such glue is 351 rubles.

Advantages - absence of various acids, waterproof, forms an elastic film, economical, heat-resistant, strong and high-quality fixation. The substance is not exposed to oils and solvents. Resistant to temperature changes, able to withstand - from -50 to +150 °C.

Disadvantages: long drying time.

"Soudal Mir-o-Bond"

The substance also belongs to the silicone type. It can be used when gluing both smooth and uneven surfaces. Ideal for bonding to reflective surfaces. Suitable for fixing objects to plaster and putty, wood, metal, plastic and other surfaces. The volume of one package of glue is 310 ml, the average cost is 370 rubles.

Advantages - there are no solvents in the composition, so the solution does not destroy the amalgam. The solution can withstand a temperature range from -40 to +150 °C. Liquid nails set on the surface in 30 minutes, can be used in rooms with high humidity, and do not have a strong odor.

Disadvantages: long drying time.

"TYTAN Professional"

Titanium mirror adhesive is ideal for porous surfaces such as concrete, drywall and wood. We recommend that you read the review: is it possible to glue drywall with glue? This glue contains various resins and synthesized rubber. Thanks to this, the seams are elastic and durable. The low cost is captivating; the packaging costs 165 rubles.

Advantages - it can be used in rooms with a high moisture content, and the composition is resistant to temperature changes - from -20 to +70 °C. Setting time is 10 minutes, but it may take three days to dry completely.

Disadvantages - not used for fixation with Teflon, all types of bitumen and silicone.

"Maxiplix AC 17W"

This hybrid adhesive is used on concrete, glass tiles, brick and plaster. The mixture is used for cladding house facades, walls and floors, for interior and exterior work. The viability of the solution is 4 hours. On average, a package costs 340 rubles.

What materials will be useful?

What can be used to turn an ordinary boring mirror into a real miracle? Here we can only say that everything can be used - you need to give free rein to your imagination. Children's toys, bottle caps, paper, fabric, all kinds of natural materials, from pebbles to pine cones - absolutely everything will do. The main thing is to choose the option that can be made depending on the person’s creative skills, as well as one that will simply fit harmoniously into the interior.

DIY mirror frame

Most often, wood is used to create original frames , as it is easy to process and suits almost every interior style. The material is time-tested, durable and environmentally friendly. Yes, and it looks very beautiful.

To decorate mirrors of square, rectangular and similar shapes, the easiest way is to use ordinary wooden borders, blocks, and plinths. Round and oval canvases are ideal for experiments. Here you can use wooden spatulas, natural driftwood, twigs and much more.

Original mirror frame

On a note! Round mirrors are often turned into original suns or unique nests using wood.

Some craftswomen who love to work with paper also use it to decorate mirrors. Often used are egg cartons that easily turn into flowers. Special stickers or decoupage techniques can be used. Don’t think that paper is a completely useless material. With the correct working technique, it will not quickly lose its appearance. But the mirror will turn out to be very unusual.

On a note! Sometimes very unusual objects are used - metal rulers, children's toys. In the first case, the rulers can be placed around the mirror like rays of the sun, in the second, toys are glued along the perimeter of the mirror in a certain pattern. This is a great option for a children's room.

Homemade mirror with a metal frame As for natural materials, you can use stones, cones, and shells. The latter will look great in the bathroom. Moreover, the products can be glued both symmetrically and in different places, depending on desire.

Wooden frames

Wooden frames look great in almost every interior. Due to its structure, wood has a unique pattern, which can be emphasized using varnish and impregnations.

Quadrangular mirrors can be framed with rough-hewn wooden blocks, and round mirrors can be surrounded by radiating “rays” of wood. To do this you will need a wooden base frame, pieces of wood for decoration, and hot glue.

You can also use wood of different species, having different colors and wood structure. It is not recommended to process wood too actively in order to preserve its natural pattern.

Prevention measures

Caring for a mirror surface should include the following points:

Carrying out regular cleaning using special products or homemade compounds;
exclude exposure to abrasive or other surfaces, including the hard sides of sponges;
It is advisable to have complex damage and chips repaired by a specialist;
mirrors do not tolerate constant moisture well, so mirror surfaces that fog up in the bathroom must be wiped dry regularly;
Rubbing the mirror with shaving foam will help prevent the mirror from fogging.

Any dirt that gets on the mirror must be removed immediately.

If deep damage

More difficult work awaits if the scratches on the glass are deep. Simple rubbing in this case will be ineffective. A recipe using GOI paste and epoxy glue will come to the rescue.

Work order:

Clean the mirror using glass cleaner. This will degrease the surface and prepare it for further processing.
Dry the mirror.
Fill the cracks with epoxy glue. When filling cracks, the epoxy should be distributed evenly, without air bubbles or unfilled cavities.
Excess filler should be removed with a cotton swab or carefully cut off with a utility knife.
Leave for 4 days.
Polish the surface using GOI paste.

If the surface damage is very serious and you cannot fix it yourself, you can contact a specialized workshop.

Mirror care rules

The rules for caring for the mirror must be followed. Otherwise, there is a risk of re-appearance of various cracks and chips. It is important to follow the following rules:

The mirror surface does not like humidity.
It is better not to place mirrors in direct sunlight.
Mirrors can only be wiped with soft, lint-free cloths (it is better to purchase a specialized one, this will reduce the risk of scratches).
There is a thin layer of silver on the mirror, so the surface should never be wiped with products designed to clean glass. They contain ammonia, which harms the surface.

After familiarizing yourself with all the possible ways to decorate a mirror, everyone can easily repair a crack in a mirror with their own hands.

The result can pleasantly surprise and even bring some novelty to the design of the room.

Professional products

Indeed, there are special products that are designed to eliminate scratches. Many users really rely on it, since such substances are sold in professional stores, where they should know a lot about it. In fact, sometimes it really works. The main thing is to find a quality product.

After purchasing such a professional solution, it must be applied to a microfiber cloth, and then applied to the display in a circular motion. After this, you can start polishing the device. As it hovered, 10 minutes is enough for minor scratches to become smaller and some to disappear.

Unique ways to protect your bathroom mirror from moisture

Interior mirrors used today are produced with amalgam, that is, a coating made of silver or aluminum. Under constant exposure to water, such a spray layer changes its structure, swells, completely losing its original appearance. By knowing unique ways to protect your bathroom mirror from moisture, you can extend the life of such interior items, which will retain their beauty and functionality for many years.