SHARE ON SOCIAL NETWORKS
FacebookTwitterOkGoogle+PinterestVk
A sliding wardrobe in the hallway - the photos clearly demonstrate the types of products - is one of the most necessary elements of furniture in the room. Its design and dimensions are selected taking into account the characteristics of the corridor. The internal content must be well thought out so that every centimeter of space can be rationally used. Thanks to the variety of façade designs, the product can harmoniously fit into any interior.
The main advantage of sliding wardrobes for the hallway is the variety of designs, installation variations and design
What could a closet be like in the hallway: photo options
When designing a corridor space, a special approach is required. Usually the room is not large in size and has structural features, which are manifested in the presence of niches, external corners and interior doors, which complicates the process of furnishing the corridor. In this limited space it is necessary to be able to balance functionality and aesthetics.
A sliding wardrobe is a non-mobile structure mounted in one place
In the hallway you can install a wardrobe, a product with hinged doors, or a combined design. The first option is the most popular and sought-after solution. This design will fit even into narrow and cramped spaces thanks to ergonomic sliding doors. Due to the variety of design of the facade of hallway cabinets - the photos clearly demonstrate this - the corridor will acquire a well-groomed, stylish and presentable appearance. Outerwear, seasonal shoes, hats and other accessories will be hidden behind the sliding structure from prying eyes.
The reliability and durability of doors depends on the material of the frame where the movement of the panels takes place. Aluminum products are considered to be of higher quality. They ensure silent running of the blades, do not deform and serve for a long time. Steel guides have a lower cost. Their service life does not exceed 5-8 years.
The sliding wardrobe is perfect for hallways of different sizes; it easily fits into any niches
Important! The compartment system takes up to 10 cm of internal space, so the shelves will have a smaller width than the structure itself.
Traditional Hallway Cabinet Configuration
Cabinets with hinged doors, reminiscent of pencil cases, require a large amount of space to open the structure. The internal content is no different from the previous version. This model is most often installed in a spacious hallway; photos of cabinets show possible design options. A closed product is usually made of natural wood. The facade is decorated with decorative carvings and forged fittings, which creates a respectable appearance of the product, emphasizing the subtle taste of the apartment owner.
For cabinets with hinged doors, more space is needed to open them easily
Very often you can find in the hallway an open-type cabinet built into a niche, which does not have opening doors. This option looks minimalistic, but is the most convenient to use, as it allows you to quickly remove clothes from a hook or take the necessary accessory from a shelf or drawer. However, since all the contents of the structure are in plain sight, things in the closet must be neatly stocked so that the situation in the room does not resemble chaos.
Combined models are a combination of closed and open cabinets. A small closet can be located here. The open part is represented by shelves and hooks, and in its lower space you can equip a comfortable small ottoman. It is used not only for sitting - its cavity can be equipped with space for storing various things.
The most convenient for the hallway are combined models, which are a combination of closed and open cabinets
Profile
There are two types of systems that ensure the functioning of sliding doors - metal and aluminum guides.
According to their design, sliding systems are also divided into two types - supporting and hanging.
In support systems, rollers installed at the bottom provide good “ride” for the doors. However, the grooves become clogged, and this leads to wear of the mechanism.
Suspended systems are more expensive and more difficult to install.
As for the price of the material, it should be noted that metal guides are cheaper, but are subject to deformation and corrosion. Aluminum systems are more expensive, but their service life is designed to last a considerable time.
Which one is better to choose for a hallway wardrobe?
The best option for a hallway is a wardrobe with a sliding door system. Due to the fact that the product can be shallow (only 45 cm), installation of the structure does not require much space. This is enough to place outerwear, shoes and everyday accessories. Sliding doors save space without requiring any free space to open them.
There are two design options: a free-standing product and a built-in wardrobe. The first type is a full-fledged model, consisting of a frame, internal filling elements and sliding doors. The structure can move from place to place. Such a cabinet is usually used for rooms with a large area, where there is no need to save space. The disadvantages of the product are its high cost, which is associated with high material costs, and a relatively small usable area (due to the presence of a frame). In addition, dust accumulates in the upper part of the structure, due to the formation of a gap between the product and the ceiling.
There are practically no disadvantages to sliding wardrobes, except for the inconvenience of sliding doors, which, when opening some shelves, close others
Built-in models can often be found in modern hallways. This design is made to order for the hallway. A built-in wardrobe can be installed in any cramped space. Such a product does not have its own walls, ceiling and floor, since they are replaced by elements of the room to which the cabinet filling and doors are attached. This allows you to significantly save on materials, so this design will not cost much. Photos of built-in wardrobes and prices for products can be seen in catalogs from well-known manufacturers.
Such a cabinet is as spacious as possible and allows you to fully utilize the space allocated for it. The design of the product can be created taking into account the features of the corridor layout. It occupies the entire area from floor to ceiling, which eliminates the accumulation of dust on a horizontal surface. The main disadvantage of a built-in piece of furniture is its stationary nature.
Cabinet models of wardrobes leave a gap up to the ceiling, while built-in models completely cover the entire wall
Sliding systems Raumplus
The systems of the manufacturer Raumplus are the highest quality of those presented. The mechanism for connecting the profiles completely eliminates their spontaneous connection, which is a definite plus. The maximum load carried by the lower rollers is equivalent to a weight of 60 kilograms, and the maximum door height reaches 3500 millimeters. Thanks to the special design of the lower rollers in Raumplus systems, the position of the doors can be independently adjusted within 15 millimeters. The rigidity of the structure is ensured by a fairly large profile thickness of 1.2 millimeters, which ensures its high strength. All types of profiles are anodized. The thickness of the coating reaches 20-30 microns, which completely protects structures from the influence of oxidative processes. The guaranteed operation of the system is determined for a period of 25 years, or 100,000 openings and closings of each door.
Configurations of built-in wardrobes in the hallway
The design of the built-in wardrobe completely replicates the layout of its installation site. The product can be mounted in a niche, in a corner or occupy the space between two walls. For small corridors, the most rational option is a corner design. In this case, it is possible to make the most efficient use of the small dead area of the room by organizing a compact storage system there. This design will free up space along the walls, making the room seem more spacious and comfortable.
The corner wardrobe built into the hallway consists of internal filling elements and sliding doors. A variation of the corner model is a trapezoid-shaped design, which is additionally equipped with side edges. This cabinet is more spacious than a simple triangular analogue. The outer sides of the structure can be equipped with open shelves to accommodate various small items.
Types of wardrobe designs in the hallway
The rectangular module is also very popular due to its low cost and original facade design, which can be made in any stylistic direction. The structure fills the area of the room along one of the walls. May have different depths, depending on the availability of free space.
The most difficult to make and most expensive are radius sliding wardrobes, in which the doors move along a radius of a circle. The facade of such structures is made of expensive materials using a special technology, which significantly increases the price of a wardrobe built into the hallway. However, this is compensated by its spectacular, stylish, original and unique appearance. This model can fit into any layout, which is associated with ergonomic door opening. The disadvantage of the cabinet is the impossibility of using mirrors and chipboard in the manufacture of doors.
A frequently encountered configuration of a built-in wardrobe is a model in which the walls of the room itself take on the role of walls.
Helpful advice! The radius compartment does not have straight or sharp corners, which makes it less dangerous and suitable for homes with children.
How to choose the right size wardrobe for the hallway
As mentioned earlier, a closet in the hallway can be located in a corner, in a niche or along one of the walls. The size of the structure depends on this. In the hallway, built-in corner cabinets and rectangular products can have different dimensions. If the cabinet is mounted in a niche, then in this case there are certain restrictions that depend on its depth, height and width. The last parameter determines the number of doors. Two-door cabinets are suitable for niches with a width of 1.5-2 m, three-door cabinets - 2-3 m, four-door cabinets - 2.5-4 m. Doors that are too narrow will fall out of the lower grooves, and wide ones will become deformed over time.
Important! The width of compartment doors should not exceed 0.5-1 m.
Its size will depend on where exactly in the hallway the wardrobe will be located.
It is necessary that the height of the niche is completely covered with doors, but the frame cannot exceed 2.7-2.8 m. A higher structure will lack the necessary stability and rigidity. If the room has high ceilings, which are also typical for a niche, the doors should be made of separate segments, and various materials can be used. Options for a spectacular and unique facade design are shown in the photo of built-in wardrobes in the hallway.
Related article:
Corner wardrobe in the bedroom: a spacious and multifunctional element of the room
Organization of internal content. Product dimensions. Types and design of doors. Material of manufacture. Manufacturers.
For a full-fledged wardrobe, the niche should have a depth of 0.6-0.7 m. If this value is less, the filling for such a design is provided for narrow corridors. If the cabinet has a depth of less than 40 cm, the shelves of the structure will be ineffective, since their width will be about 30 cm. If the niche is deeper than 1 m, in this case it becomes possible to create a full-fledged dressing room. However, the internal contents should be properly organized so that the cabinet is comfortable during operation.
Recommendations for filling wardrobes in the hallway
Hallway cabinets are more specialized. The structures are not large in size, as they are designed for storing outerwear and seasonal shoes. There are no special holders for ties and trousers, and no drawers for underwear, socks and belts.
The internal filling of the wardrobe in the hallway can be fixed or combined. The first option clearly defines the location of shelves, drawers and hangers. Combined models are equipped with removable shelves, places for fasteners and other elements that allow you to subsequently change the location of the internal contents. Despite the fact that the latter option is much more convenient, from a reliability point of view this solution loses.
The functionality of a sliding wardrobe greatly depends on the thoughtfulness of its contents
Outerwear is stored exclusively on hangers, so most of the internal space is allocated for a niche with a barbell. If the closet is narrow and has two doors, then both compartments are occupied by hanging clothes. Shelves can be located at the top and bottom of the structure. In the case of a large three-door wardrobe, one compartment is used for stationary or pull-out shelves, which is clearly visible in the photo of wardrobes in the corridor.
Helpful advice! In a small-sized closet, the internal space can be zoned in this way: long outerwear is located in one compartment, shorter ones are located in the other, which allows you to equip the niche with additional shelves.
With a structure depth of 50-60 cm, a conventional bar is mounted parallel to the doors. If the cabinet is narrow, 30-45 cm deep, an end crossbar is used. The capacity of this design is much smaller, but you can fix the problem with the help of a retractable hanger. It is not recommended to install a pantograph for a hallway closet. Constantly lowering and raising the structure is difficult and tiring.
The top shelf is used to place hats, scarves and gloves. To arrange shoes, it is recommended to use inclined metal grids, which are located in the lower part of the closet. If space allows, you can equip several drawers for storing shoe cosmetics and various accessories. If the design has a side wall, you can place hooks for bags and hats on it. Various options for filling the hallway closet can be seen in numerous photos on the Internet.
When choosing a ready-made wardrobe or ordering an individual one, you need to pay attention to the capacity of the shelves, drawers, number and purpose of clothes rails
Important! The fittings for the wardrobe in the corridor should be as durable as possible, since it will take a higher load than the furniture in other rooms.
What to pay attention to
An important factor in choosing a cabinet is its functionality. It is necessary to take into account that the child is growing rapidly, and over time it will be inconvenient for him to use furniture designed for a certain age
It is very important that the filling of the cabinet can be quickly adjusted to suit the child’s growth. There is furniture whose internal space is easily adjustable, which will be extremely convenient in this case.
To determine which wardrobe is most suitable for a nursery, you need to consult with consultants. They will be able to suggest a definitely good option, based on the requirements for the product.
When purchasing a wardrobe, you need to carefully read the composition of the furniture. As a rule, factories often produce furniture made from toxic substances. This is very harmful, especially for young children. In particular, vinyl plastics that release filates into the air should be avoided. They can lead to serious hormonal disorders. Therefore, it is recommended to ask the sellers about the supplier and the materials used for production.
When choosing a wardrobe, you need to remember that in a child’s room you often have to make various rearrangements. The furniture has to be disassembled for more convenient movement. Therefore, the cabinet must have a simple system so that it can be easily disassembled and later reassembled.
If the baby is still quite small, then it is not advisable to stop at light colors. As soon as the child begins to explore the world and develop, the closet doors will not have a good time.
The sliding system may fail if not used carefully. Therefore, in addition to color, you need to look at the quality of the selected product. If the cabinet is made from the most durable fittings and has good profiles, then this is the most suitable option for a children's room.
Material used for the manufacture of built-in wardrobes in the hallway
The fundamental factor that affects the reliability, durability and appearance of furniture is the material of manufacture. A custom built-in wardrobe in the hallway can be made of chipboard, MDF, natural wood and plywood. The first option is an affordable alternative to natural material. With high-quality cladding, the product can completely imitate wood. There are several types of chipboard, differing in the amount of formaldehyde resins in the substance. For residential premises, type E1 should be used, which is the most environmentally friendly material with a low content of harmful substances.
To ensure wear resistance and moisture resistance, the material is covered with a special protective film, which extends the service life of the product. However, at the slightest violation of this finishing, the chipboard begins to collapse. The material is characterized by a wide range of species, but its appearance is devoid of elegance and originality.
An equally popular option for making custom built-in wardrobes is MDF. The material is characterized by density, moisture resistance, strength and durability. A wide range of products, which is achieved by covering the plywood surface with veneer, vinyl or melamine paper, allows you to choose an option for any interior.
A sliding wardrobe made of MDF will cost more than a similar sliding wardrobe made of chipboard, since this material is very durable and resistant to moisture
Natural wood has significant advantages over chipboard and MDF (in terms of quality and environmental friendliness of the material). The wooden structure has a solid and presentable appearance, which is clearly visible in the photo of the design of the hallway cabinets. The material is characterized by strength, wear resistance, practicality and durability. However, such a wardrobe built into the corridor will be very expensive.
Helpful advice! It is not recommended to install a wooden structure in rooms with high humidity, as the product may become deformed.
Plywood is a multilayer wood material consisting of veneer sheets glued together. The surface can be laminated, varnished or painted. This material can be combined with other options, resulting in an attractive wardrobe design for the hallway. Photos clearly display various design ideas.
Choosing a manufacturer
In which store should I buy a cabinet so that it is guaranteed to last the entire promised period? There are some tips on this matter:
- Choose trusted manufacturers who have been on the market for a long time.
- Analyze reviews about the company.
- Review the prices and features of the cabinet you choose and compare them with competitors.
- Check the cost of additional services.
- Buy furniture only with a warranty period.
- Follow the promotions.
Such recommendations will help you not only choose high-quality furniture, but also save a lot of money! And, most importantly, take your time with your choice. It is best to independently visit several salons you like and clarify the range and characteristics of the goods. They don’t take money for asking, and the main thing for you is to choose good furniture that will suit the interior and last as long as possible, without causing any unnecessary trouble.
Facade options for built-in wardrobes in the hallway: photo examples
When choosing material for the facade, you should be guided by the door opening system. Swing elements are best made from chipboard, MDF or plastic. For the sliding system, you can use any material.
Natural wood is rarely used in the manufacture of sliding wardrobes due to the high cost of construction
A chipboard facade is the cheapest option, acceptable for families of any income. The material is characterized by strength, environmental friendliness, resistance to dirt and moisture. The surface can be laminated or finished with natural veneer of oak, beech, pine or ash, as shown in the photo of wardrobes for the hallway. This option is suitable for corridors decorated in a classic style.
MDF facades are also characterized by high performance indicators. The smooth and even surface can be painted in any color, which allows the product to fit into any hallway interior; photos of MDF wardrobes are clear proof of this.
Important! The ends of MDF and chipboard surfaces are covered with a reliable PVC film, which protects the product from moisture and damage, giving the material a more neat appearance.
Facades made of rattan and bamboo look interesting and natural. Such furniture gives the room a feeling of warmth, naturalness and naturalness. It is relevant for corridors created in ethnic style. The design of a wardrobe in the hallway made of artificial leather will look luxurious and stylish. The model will become a real decoration of the corridor, decorated in a modern interpretation or in the Baroque style.
MDF canvas can be painted in various colors and coated with high-gloss enamels
Sliding wardrobe in the hallway: photos of models with mirror, glass and plastic facades
The most popular among other options is a mirrored facade, the variations in use of which are shown in the photo of sliding wardrobes in a small hallway. It always looks stylish and original, which is ideal for rooms decorated in minimalist, loft and hi-tech styles. The mirror combines harmoniously with different materials. The surface can be sandblasted or photo printed. Using modern technologies, you can create complex and three-dimensional designs and patterns on the mirror - this is clearly shown in the photo of the design of built-in wardrobes in the hallway.
Often in the corridor you can find a structure with a glass facade. In this case, matte material is often used, which makes it possible to achieve a translucent effect, protecting the internal contents from prying eyes, and at the same time visually increasing the dimensions of the room. This is how you can decorate a built-in wardrobe in a small hallway. In addition, transparent glass is used, on the reverse side of which a decorative PVC film is attached with special additives that increase the strength and durability of the structure. Such a glass facade can be plain, multi-colored or with various abstract and mosaic designs.
Prints on all doors, which are combined into a single composition when closed, are very popular. As they move, the image acquires three-dimensionality. This effect is clearly demonstrated in the photo of built-in wardrobes in the hallway.
Important! If the surface of the facade is damaged, the fragments will not scatter to the sides, since they will be held in place by the film.
To make the facade of radius models, acrylic plastic is often used, which can be matte or glossy. The material is relatively lightweight, which reduces the load on the profile, while increasing the service life of the furniture. A pattern is applied to the acrylic or the surface is decorated with flowers, leaves or coffee beans – this is clearly demonstrated by photos of corner built-in wardrobes in the hallway.
Mirrored doors installed in a wardrobe will expand the space, making the hallway feel noticeably larger
