How the microwave is attached to the bracket

The nuances of installing a microwave oven on brackets

Not everyone knows that installing a microwave oven on wall brackets has some nuances, without knowledge of which the device can be damaged during operation.
Of course, properly selected branded brackets for installing a microwave on the wall will last for decades without any signs of damage. However, if they are installed incorrectly and at the same time do not comply with the operating conditions in the future, irreparable consequences may occur.

There are several nuances to consider:

The brackets must be correctly selected for the weight and dimensions of the microwave oven.
The fastening elements must correspond to the load from the device and the material properties of the wall surface to which the bracket is mounted.
Installation of the bracket must be carried out strictly according to the building level. If the surface formed by the two mounting angles has even the slightest slope, the microwave will tend to slide off during operation, especially when the door is opened.

According to reviews, many owners of specialized brackets have noticed a pattern that the microwave oven constantly slides and does not hold well on horizontal elements. Therefore, it is better to worry about this problem in advance and choose fasteners with holes (or drill them yourself) to fix the microwave itself from below using small self-tapping screws in the rubber feet.

You should determine in advance the place where the brackets will be installed and what properties the wall surface material has. The lower its density, the more reliable the fastening should be - in terms of the number of fasteners, their length and the area of contact between the bracket and the wall.

Rationalization of space is the most important process when arranging a small kitchen. This is especially true for the placement of small household appliances, such as an electric kettle, multicooker, coffee machine or microwave. And if most appliances have to be placed on the countertop or in free niches of the kitchen unit, then in the case of a microwave oven you can find more original and convenient solutions. One of them is its placement on the wall using a bracket.

Rules for placing a microwave oven

To begin with, it is worth noting that there are a huge number of options for how to place a microwave oven in the kitchen. But even if you leave this device on the table or kitchen cabinet, you will have to take care of some installation nuances.

So, a few rules for placing a microwave:

The first thing to consider is the height of the device. All family members (except small children) should be able to easily reach the microwave;
The device should not be located close to the wall or the walls of cabinets, refrigerators, etc. It is necessary to leave at least a couple of centimeters of free space to allow air access to the ventilation holes;
A microwave above the refrigerator is not the best option, even if the latter is short in height. The heating surface of the oven can lead to malfunctions of the freezer;
To prevent washing your microwave oven from becoming a regular activity, you should not place it near the stove. In addition, being located next to a sink can cause a short circuit;
A window sill can be an excellent place for a microwave, but a problem can arise in winter due to the temperature difference between the device and the cold window - condensation easily forms on it;
Another important condition is that the microwave oven should be placed at a distance of at least two meters from electronically controlled appliances;
If you have indoor plants in a certain place in the kitchen, the oven should be placed away from them to avoid the influence of harmful, in this case, microwave radiation.

In general, you need to choose a location for the microwave in which all family members will have free access to it, and at the same time the device will not interfere with the opening and closing of the unit doors, passage and use of other devices.

Is it possible to place a microwave oven next to a refrigerator?

The device is designed in such a way that only the chamber inside is heated. At the same time, the housing is slightly susceptible to high temperatures. This occurs because warm air is released through the vent on the sides and back of the appliance.

The instruction manuals do not say that it is unacceptable to install the stove next to the refrigerator.

On the contrary, it is prohibited to place a microwave or refrigerator near heating appliances, radiators, stoves, or ovens. Although a microwave oven emits some heat, it does so only if it is used as an oven.

Advice from professionals

As you can see from the instructions, fixing the bracket to the wall with your own hands is not so difficult. To ensure a high-quality result, you should pay attention to the advice of professionals:

Before starting work, be sure to check the strength of the wall;
use only a high-quality tape measure or a centimeter with clear divisions;
check the building level more often;
use only durable materials of certified quality - this applies to both the suspension itself and the fastening elements;
It’s better to check the mark several times and screw the bracket one by one rather than re-drill the holes several times;
Be sure to follow safety precautions when choosing a place to place a hanging microwave.

This arrangement of the microwave oven will significantly save space, help fit this piece of equipment into any interior and add a stylish twist to your kitchen.

A microwave oven, along with a hood and a dishwasher, has long become an indispensable attribute for any kitchen. But what to do when you want to equip the kitchen in accordance with the needs of a modern person, but the area of the room is designed only for the Soviet minimum? Often, users have to choose between a full-fledged work surface and full kitchen technical equipment.

Placement of built-in microwave ovens

Built-in microwave ovens have increased thermal insulation of the body, which affects their cost. Having a good chamber volume and sufficient capacity, the designs are quite compact, which allows them to be placed in different positions of the kitchen space. Distinctive features of devices of this series:

Common design direction with other representatives of embedded equipment.
Dimensions taking into account the dimensions of kitchen cabinets (standard – width 60 cm).
Corresponding design (in front - decorative panel, back - technical).

In any case, the main task is the correct distribution of all appliances in the kitchen for their most efficient operation.

Under the table top

Placing a microwave under the countertop completely frees up the work surface, saves space, and you can install the electrical appliance anywhere on the lower level, even under the hob. To do this, you should take care in advance of a special cabinet and shelf, the size of which provides for additional space for the free passage of air (at least 15 cm in the back and more than 10 cm on the sides).

Of course, this location of the microwave oven is convenient, but you should not lose sight of the fact that:

To operate the microwave you will have to constantly bend over.
The accessibility of the device in terms of placement height can be dangerous for small curious children.
It will take a fair amount of effort to maintain the equipment.
It is better to purchase a model with buttons to open the door, otherwise you can regularly injure your legs.

Sometimes a kitchen project includes an “island” or a bar counter, then you can install a microwave in one or another object. By the way, in this way the issue of severe contamination and drips, which almost always occur when using the countertop, will be very easily resolved.

Corner cupboard

Large spacious kitchens have a comfortable, well-thought-out layout. But deep corner cabinets are not used very often, and this is an excellent place to install a microwave oven. The electrical appliance will fit into the corner without any problems and fill the empty space. It is very convenient to work with equipment installed in this way.

Set

Installing a microwave in a kitchen cabinet is perhaps the most aesthetically pleasing, neat and comfortable way to place it. In addition to external attractiveness, we can note:

A unified style of the resulting composition.
Practicality.
Possibility of installing the electric furnace at the most appropriate height.
Selecting a device model before ordering a headset (decide on the dimensions, since some microwave models require a free height of up to 20 cm on top, design).

Do not be upset if this issue is not thought through in advance. Many kitchen sets pre-provide space for built-in appliances. Therefore, sometimes it is enough to decide on the size of the device, the desired installation height, make sure that access to the microwave oven will be free, and find a drawer, cabinet or shelf where you can build the equipment.

Above the hob

The issue of installing a microwave oven above the hob usually evokes different emotions. On the one hand, it saves space, everything looks compact and very nice. On the other hand, the safety and practicality of this “duet”:

The microwave oven heats up and the risk of fire is quite high.
If the microwave is mounted high, reaching it can be very difficult.
Oil fumes and smoke will sooner or later affect the outer shell of the device, reduce the operational capabilities of the electric furnace, and subsequently can lead to breakdown.
Hot steam, and therefore high humidity, will stimulate the appearance of rust in the internal system of the device.
Problems arise with the placement of the hood, therefore, air circulation and its quality are disrupted.

Of course, if you want to install appliances above the stove, then it is better to pay attention to modern models that combine the functions of a microwave with a hood or oven. Such equipment has maximum thermal protection.

Niche in the wall

A niche in the wall is one of a number of original and stylish solutions, the organization of which, as a rule, is planned when creating a design project for the room. So what are the advantages of such an idea?

The opening can fit very correctly into the interior of the kitchen.
Depending on the degree of operation of the device, a niche can be organized both in the most active zone and at a distance from it.
The installed microwave oven is easily accessible for cleaning or washing.
If you design the outlet inside the opening, you can also hide the wires there.

This setup is unusual, but very interesting.

Above the oven

In terms of comfort during operation, one of the leading positions is occupied by the “union” of a microwave and oven. However, there is one small “but” - this is the height at which the equipment will be located. Here it is better to calculate all the options in advance and, perhaps, be prepared for the fact that the oven will be a little lower than we would like, and the microwave oven will be a little higher. Fortunately, this will not in any way affect the efficient operation of the devices, even if it is a large microwave that is actively used. And if you choose both stoves in the same style, in a similar color or even the same brand, they will become a decoration of any kitchen and the pride of the housewife.

Today, manufacturers offer customers multifunctional 2-in-1 designs that combine the capabilities of both ovens and microwave appliances. It may be a little expensive, but it is compact and practical.

Kitchen island

Arranging a kitchen island is a popular trend in organizing useful space, both in large country and small apartment kitchens. Since the island of furniture in the center of the room houses all kinds of household appliances and a considerable amount of various dishes, it is difficult to imagine that there will not be a place for your favorite microwave. Of course, its size makes you think about the installation location. And it doesn’t matter - there wasn’t enough space to place it on top, then you need to build it directly into the island. Once again it will not be “conspicuous”, but, in general, everything will look very aesthetically pleasing and modern.

Pencil case

Installing a microwave oven in a “pencil case” or so-called high module today is an innovative idea. And the point is not at all in the shape of the design, but in the fact that several types of household appliances can be built into them. For example, a dishwasher, oven and microwave oven; washing machine, oven and microwave; oven and coffee machine, etc.

You can purchase a “pencil case” either together with a kitchen set, or order it separately. Often, this is a very correct and profitable solution when arranging devices:

There is a certain place with the most flat surface.
Equipped with the required number of sockets.
The required distance to walls or other surfaces for good air passage is calculated.

Since we are talking about the kitchen, it would be nice if the countertop was located immediately next to the structure, opposite, or at least no further than 2-3 m.

Drawer

Another original idea, modern “know-how” is a microwave in a drawer. There is no doubt that this solution is very convenient:

Nothing disturbs the organized order in the kitchen, the voluminous device is invisible.
The box in which the electrical appliance is located can be equipped at the bottom of the headset.
The design with a microwave oven performs all the necessary functions and easily extends and retracts.
Control is carried out using buttons located slightly higher.

It is very practical and stylish. The only thing that can make you think twice is the rather high price of the device.

Separate room or "garage"

If the house has a separate room, pantry or similar room, you can place all the household appliances there: microwave, food processor, dishwasher, washing machine, coffee machine, blender, etc. This separate room will become a kind of garage for devices, which has both its pros and cons. The biggest advantage is that it relieves the kitchen of a large number of large appliances and makes the interior light.

In small kitchens, you can also organize your “garage” from a cabinet shelf or a section of the work surface, and place equipment there that is temporarily not in use. The microwave must be installed so that, if necessary, it can be used without problems.

Advantages of placing the stove on the wall

A microwave on the wall is convenient and practical. You place the oven at the optimal height and do not have to lean towards the viewing window during cooking, as is the case when installing it on a worktop.

Other advantages of this microwave oven arrangement:

Free space on the countertop. This is especially true if you have a small kitchen and every centimeter of work space is precious.
Safety. As a rule, we hang the microwave at eye level of an adult, which means that you don’t have to worry about leaving your child alone in the kitchen.
Durability of the oven. A device hung on the wall will last longer, since it will not come into contact with other objects and overheat.

If you install the stove on a shelf suspended from the wall, your storage space will increase.

What and how to put

People often ask: is it possible to place objects on the stove lid? As mentioned above, there should be space for ventilation between the bottom cover of the device and the surface of the mat. If you put something heavy on the stove, its legs will sink into the rug, and ventilation will be disrupted. Therefore, you cannot place a multicooker or other heavy objects.

When installing a microwave on a washing machine or dishwasher, you need to take into account the following nuances:

Compare the depth of the stove with the width of the household appliance on which you are going to place it. If the depth is greater, it will hang down, which will cause ventilation problems.
If the microwave is on another household appliance, it should not be plugged into a common outlet; a separate one is needed. The use of an extension cord is not recommended .

The most favorable location for a stove is considered to be a dishwasher - it practically does not heat up and does not vibrate. It is strictly not recommended to install on:

TVs;
over shells;
for high-height refrigerators;
over gas stoves.

Selecting a mounting bracket

The standard way to mount a microwave on a wall is on metal enameled corners (brackets), where one side serves as a stand for the oven, and on the other there are holes for fasteners (hardware). There are two types of corners - simple and telescopic. The latter moves forward if necessary to increase the area of the stand.

The brackets are:

The microwave brackets are equipped with latches or anti-slip pads to prevent the oven from falling off the shelf.

For your information . Brackets from different manufacturers differ little from each other.

When choosing a bracket, pay attention to the method of fixing the microwave. Of the linings, rubberized material is considered the most reliable. The stove installed on it will stick tightly and will not budge under its own weight, even if it is accidentally touched.

Before you go to the store, measure the depth of your microwave and decide on the mounting hardware.

Installation options:

Brackets are metal wall mounts on which the microwave is placed. Available in different sizes, some are adjustable.

The color can be matched to the tone of your stove: white, black, metallic shades (silver, bronze), red and others.

Shelf. This could be a shelf in a kitchen unit rack, a matching wall shelf or a corner. In any case, this is a stable, harmonious, comfortable option.

You don’t have to buy it; you can make a shelf yourself.

Stand. It can be hung or installed on a tabletop.

You can choose any stand design and number of legs. The free space of the table under the stand can be used to store dishes or frequently used spices.

5 recommendations for selection and installation:

When choosing a hanger for household appliances, check the contents and integrity of the materials. Metal, plastic, wood must be free of cracks, chips, and other defects. And the number of fasteners (bolts, screws) corresponds to the number of holes.
Pay attention to the color of the appliances and the dominant shade in the kitchen to find the right tone.
Carefully secure the rubber elements - they prevent slipping during vibration during operation.
Measure your microwave oven before purchasing a holder - it should fit correctly. This will allow the case to be secured firmly and reliably.
When choosing a corner modification, pay attention to which side the ventilation holes are on the MVP, so as not to put them in a corner or obscure them with a wall. The stove may overheat, fail, or cause a fire or explosion.

Necessary tools for installing the microwave on the bracket

To hang this kind of shelf on the wall, you don’t need many special tools. For clay walls, a hammer and a screwdriver are sufficient. Concrete walls require the use of a more powerful tool - an electric drill or a hammer drill.

In the case of frame walls, it all depends on the material from which the supports are installed. You will need a drill and a drill bit for metal or wood.

For marking, you need any writing object; it is most convenient to use a simple pencil - it writes clearly on most surfaces and is easy to wipe off if something happens. A measuring tape and a building level will be useful for correctly marking.

For dowels you will need a hammer.

Selection of materials

Materials used:

hardware (their choice is determined by the type of walls) - anchor bolts or dowels;
construction tape for collecting waste;
corner shelf if you decide to hang the microwave oven in the corner;
brackets.

The brackets are a structure consisting of two L-shaped holders. On one side of the holder there are holes for attaching to the wall; the other side of some models extends, increasing the usable area for placing the microwave. In some cases, the structure is equipped with additional cross members.

When choosing a bracket, pay attention only to models that are designed specifically for microwave ovens.

Criterias of choice:

Size. The width of the bottom of the bracket should correspond to the depth of the microwave.
The maximum weight that the brackets can support. As a rule, this parameter is indicated on the packaging. To correctly calculate the required load, add 5 kg to the weight of the microwave itself (tolerance for dishes and prepared dishes). Choose a bracket with a significant margin of safety.
Retainers. The brackets must be equipped with rubberized inserts or special clamps so that the large stove does not slip off the holders.

Please note that the color of the bracket matches the microwave and the interior of the kitchen. Standard colors are black, white, gold and metallic.

Advice. If the stove is small, pay attention to telescopic bracket models. Their advantage is that later it will be possible to install a larger microwave. The telescopic stand makes it possible to move the device away from the wall, which is important when cleaning.

Types of shelves for microwave ovens

The easiest way to mount the microwave on the wall is to place it on a shelf. If, when designing kitchen furniture, an open special shelf was not provided, you will need to find a place to install an additional one. There are the most common shelves - two or three brackets on which the shelf itself is fixed. These are so easy to make yourself. There are more complex multi-tiered models.

To prevent the device from overheating, you need to leave 5-7 cm gaps on the sides

Microwave shelves are made from different materials:

Metal - stainless steel, nickel-plated steel, galvanized, painted.
Made of wood. Under varnish or paint.
Made from laminated furniture chipboard.

A wall-mounted microwave shelf can be single-tiered, double-tiered or multi-tiered. You can choose depending on your need. Single-tier ones are good if you are going to install the device in the space between the countertop and wall cabinets. The space under the shelf can also be used.

The microwave shelf can be corner

Often the microwave oven is placed in the corner. In this case, you can make or buy a corner shelf. This option fits especially well under a cabinet with a corner door.

An interesting option: a shelf for a microwave and an electric kettle with outlets

There are also shelves for a microwave oven with a base. This is when there are not just brackets and a shelf, but also a back wall. These options are good, but you need to make sure that the shelf is deep. Not all microwave models can be built-in. In conventional ones there should be an air gap to the wall. By the way, you need to pay attention to this in ordinary shelves. But there the sides are usually not closed, which improves ventilation.

Metal

If your kitchen has metal trim, a metal microwave shelf on the wall will look good. They are also single-tiered or multi-level. You can find different designs - with rounded or rectangular sides, with handrails of greater or lesser height, with shelves on the lower level for small utensils.

Metal Wall Shelf Options

The most common color is metallic. If desired, you can find them painted in a variety of colors. The color is usually matched to the microwave, but it can also be painted to match the furniture or the wall.

How to mount a microwave on the wall with your own hands

To begin, select a section of the wall to install the microwave oven. The optimal height is at chest level of the shortest person in the household.

Attention! The microwave weighs a lot. To prevent it from falling, make sure the partition is secure.

Make markings on the wall. To do this, measure the width of the microwave, determine the location of the brackets relative to the oven and the distance between them. Select the height at which the stove will be located, attach one of the brackets to the wall at the desired height and put marks for it through the mounting hole. Measure the distance between the brackets, apply a level and mark the attachment points for the second bracket. Place construction tape under the marks to prevent dust from flying around the room.

How to Attach Brackets

The classic bracket looks like the letter “L” and can withstand up to 70 kg of load. Having chosen the appropriate model and durable fasteners, you can get to work.

Installation steps:

Decide on a location. The MVP should be located away from the gas (electric) stove, refrigerator, sink, TV and closer to a grounded outlet.
Mark the distance between the fasteners on the wall. Measure slowly, carefully and accurately, with a tape measure and level, so that you don’t have to redo it.
Drill holes with a drill. This video will help you:

Special plastic elements are inserted into the holes into which self-tapping screws will fit.
Now you can attach the L-shaped beams.
Apply all the bumpers and anti-slip pads.
Install the oven.

Ready! You installed the microwave yourself. Congratulations on a successful installation!