It would seem - what is so difficult about assembling ordinary cabinet furniture? But for an inexperienced person, this process can sometimes seem like a super task. Especially, as often happens, if there are no assembly instructions.
Let's try, using an ordinary chest of drawers as an example, to talk about the basic rules for assembling furniture. So, they brought you packed boxes. There is no particular point in checking the presence of all the components (you won’t count all the screws and cogs), the only thing is that if there are a lot of boxes, then you need to compare their number with the number on the invoice. Does it match? So everything is fine.
How to assemble a chest of drawers
Before moving on to a precise sequential instruction circuit, it is necessary to consider general principles.
First assemble the base body of the item, and then the remaining parts.
- It is better to start assembling any furniture, especially large-sized ones, from the largest parts, continuing downwards. In our case, first the main body, then the fastening of the drawers and other small aspects.
- Work exclusively on a flat surface to avoid problems with the relationship of the body parts to each other.
- Cover the floor with a protective material to protect both the furniture and the work surface from scratches.
- Some materials may be fragile, which is why you need to perform all actions carefully - slowly tighten the bolts, do not drop components, etc.
The bolts need to be tightened tightly, but not too much.
Necessarily! Perform assembly only in a well-lit area to avoid loss of parts and inaccurate measurements.
Installing Items and Shutting Down
The assembled parts of the box must be installed. Next, the stability of the structure on a flat surface is checked. The parts should fit tightly, without gaps or distortions, and the drawers should be removed smoothly. If necessary, tighten bolts and eccentrics. The final touch is to properly attach the caps. The self-build process is complete.
After installing the main elements of a luxury chest of drawers, guides are installed on the inner surface of the sides of the case and on the drawers. If they are installed correctly, they will be able to ensure smooth movement of the elements and they will not cling to each other.
Inspect parts for defects
The path that furniture takes from production to the end user is usually multi-stage, and therefore no one is immune from defects. It is better to check the furniture for the latter immediately before purchasing.
First, examine all the parts of the dresser before assembling.
Sometimes the case may be scratched or slightly damaged, and sometimes the damage may be significant. The chest of drawers comes with an assembly diagram, so don't be lazy to check the package before starting work.
In addition, the instructions should have a picture of this chest of drawers.
Nuances of care
Wenge chests of drawers are particularly beautiful and elegant, but require some care. For weekly cleaning, a soft suede cloth is suitable. It is enough to wipe the product first with a damp and then with a dry cloth. In addition, once a month you should treat the surface with special furniture products. They can be replaced with wax or burdock oil.
You should also maintain the optimal temperature in the room where the chest of drawers is located - not lower than +15 degrees. You should not place furniture where it will be exposed to direct sunlight. The humidity in the room should not rise above 65%.
It is recommended to inspect all connections annually and tighten them if necessary. You should handle the furniture carefully, avoiding impacts and mechanical damage, then the wenge chest of drawers will last for many years and retain its original appearance for a long time.
For weekly cleaning, you can use a soft suede cloth
Once a month, it is advisable to treat the surface of the furniture with special means.
In order for the chest of drawers to last longer, you need to handle it carefully, avoiding impacts and mechanical damage.
Required Tools
Some models involve “seamless” installation of all elements, which greatly simplifies the work. However, for reliability it is worth using fastenings such as nails and screws.
Use professional tools to assemble furniture.
To do the job well, we will need the following set of tools:
- A tape measure is a mandatory attribute; it is necessary for correct assembly and accurate measurements.
- We will also need a Phillips screwdriver that fits the size of the screws.
- It is most convenient to assemble the entire structure using a screwdriver. Since the self-tapping screws in the kit are of medium size, the drill chuck should not be less than 10 mm.
- A hammer will also come in handy.
Use professional tools carefully.
If possible, also use a level to assemble the structure perfectly accurately.
Services for Samara
| Company | Offer |
| Papa John's | order delivery |
The menu of Papa John's restaurants offers more than 20 types of pizza, as well as a variety of snacks, salads, desserts and drinks. skidkagid15 -15% discount when ordering over RUB 1,199.
Policyholder - individuals and legal entities Insurance compensation - up to 500 thousand rubles. (for each victim) Policy delivery for Moscow residents is free
Insurance without inspecting the car or going to the office. Discounts (KBM) on MTPL for accident-free driving
Fast. You apply for a policy without queuing or going to the office; it is immediately sent to your email after settlement and payment.
Assembly steps
After the initial inspection for defects, as well as equipping the workplace with light and tools, you must:
- mentally draw up an action plan guided by the principle “from big to small”;
- we start with the formation of the main body - the frame of the entire structure;
- Next you need to assemble the boxes;
- the next stage will be marking the installation of retractable mechanisms for drawers;
- after which you will need to correctly position all the fasteners;
- now - fronts for drawers and installation of handles;
- The final stage will be the top of the chest of drawers.
Important! The sequence of actions and the number of points in the plan may vary from model to model. Furniture is varied, which means the situation is individual.
Assembling the chest of drawers
Pay attention to how placement on the floor is provided. Sometimes wheels can be used, which must be secured with separate screws. In other cases, legs are installed, or the chest of drawers stands on solid base strips.
Inspect the details of the chest of drawers.
It is with this element that the process should begin in order to immediately give the mechanism stability.
Assembling the chest of drawers
In order for the case to be strong and reliable, it is necessary to fix all the walls with tightening screws. The back of the chest of drawers is usually turned towards the wall of the room, and therefore is often made of thin materials; nails will be enough to fasten it.
First, assemble the chest of drawers.
If your specific design includes cross bars, they should also be installed at this stage. To ensure a flat surface and maximum compliance of the sides with each other, it is recommended to check the installation result with a level.
Before assembling the chest of drawers, it is advisable to read the instructions.
Assembling drawers
The correct assembly of the chest of drawers is determined by both the accuracy of the measurements and the accuracy of the installation of the entire structure. For greater convenience, you should immediately divide all the components into separate piles so as not to get confused.
Assembling the chest of drawers will not take much time.
First, we take short self-tapping screws (25-35mm) and connect the body with them. Then use slightly longer screws (40-50mm) to attach the bottom. It is advisable to complete the installation of the boxes by fastening the facades using self-tapping screws.
Standard assembly of a chest of drawers is a fairly simple matter.
But it is better to carry out this procedure after installing the roller guides along which the box will move. This way you will protect yourself from inaccuracies and errors.
Installation of guides
The key to quiet and smooth movement of all elements of the chest of drawers is the correct installation of the guide elements (ball or roller). Accurate measurements using a tape measure are necessary so that the drawers can be pulled out without touching anything or creating additional noise.
Secure drawers carefully.
Initially, you need to attach the runners to the inside of the chest of drawers, then the guides to the outside of the drawers. For successful fixation, you will need short-length self-tapping screws (no more than 30mm).
If you have drawers, the first thing you need to do is screw the guides to the inner surface of the chest of drawers (cabinet).
If the work done was successful and all the drawers are positioned correctly, all that remains is to attach the fronts and handles to them. You can use nails, screws, or even strong double-sided tape.
General Basics and Rules
This universal piece of furniture is very convenient, from the point of view of the fact that you can hide a lot of useful things there at your discretion and it requires very little space. However, this depends on which option is preferred. The modern market offers the buyer a variety of styles and colors to suit every taste, for example, Camellia, Grace, Beijing, Grand, Rondo models. You can buy an inexpensive chest of drawers in an understated style or an artsy one in the form of a timeless classic. But no matter which option is chosen, the item will need to be collected.
Chests of drawers Turin new and others can be stationary and mobile. The latest models, for example, Matrix, are equipped with rollers with stoppers; they can be oriented in different spatial directions in the room. There are such groups of them:
- wall (will be against the wall);
- suspended (they can be strengthened, for example, with the support of a conventional bracket);
- third-party (located near furniture);
- island (used as separation).
The top of the drawers is varied: a changing table, a built-in mirror or an ironing board.
It is important to remember that before you start collecting, you need to:
- Unpack the set.
- Find the assembly instructions.
- Determine the presence of all components.
Take a look at the component parts, their unity, and the absence of damage during transportation. Carefully study the assembly manual and especially its order. Then you need to prepare everything you need and only then start assembling.
Where can you put a chest of drawers in the house (proper location)
The appearance and dimensions completely determine the place where the chest of drawers will be located most harmoniously and most conveniently. Since retractable elements take up a lot of space, this type of furniture should definitely not be placed in the aisle, near doors or in narrow rooms.
A standard chest of drawers will fit harmoniously into any interior.
The ideal location would be along the edge of the room next to other interior elements. The chest of drawers can also serve as an excellent table for cosmetics, in combination with a mirror, or as a good TV stand.
Manufacturing materials
Different materials are used in the manufacture of wenge chests of drawers. Not only the cost of the product, but also its service life will depend on them. The most exquisite and expensive furniture is made from wenge wood. Thanks to a wide palette of natural shades, you can choose a chest of drawers that suits any interior style. Such products have increased strength, are not subject to deformation, and are scratch resistant.
Pros and cons of plastic chests of drawers for toys, furniture requirements
A chest of drawers made of wenge wood is not a cheap pleasure; as an alternative, you can choose beech furniture that imitates the color of African wood. This raw material is also durable and is not afraid of temperature changes and high humidity. Birch is slightly inferior in characteristics to it. Cheaper models are made from pine. But it is very easy to damage, so it will be difficult to maintain the original appearance of the product for a long time.
Products made from MDF and chipboard also have advantages and disadvantages. The choice between them should be based on the expected operating conditions of the furniture:
- MDF is a material based on wood flour. It tolerates moisture well and is durable. Thanks to chemical treatment, it is resistant to various types of bacteria and fungus. It does not tolerate high temperatures, it begins to delaminate and deform, so an MDF chest of drawers should not be placed in direct sunlight or near heating appliances.
- Chipboard is wood sawdust pressed with glue. The main disadvantage of products made from this material is their possible negative impact on human health. In addition, the slabs are very susceptible to high humidity. The advantage of furniture made from chipboard is its low cost. If the operating conditions are observed, such a chest of drawers can last a long time.
Dressers made of modern plastic are considered quite durable. They are lightweight, easy to care for, and the latest technologies make it possible to apply a pattern on them that perfectly replicates the texture of wenge wood.
Natural wood
MDF
Chipboard
Services for Perm
| Company | Offer |
| Papa John's | order delivery |
The menu of Papa John's restaurants offers more than 20 types of pizza, as well as a variety of snacks, salads, desserts and drinks. skidkagid15 -15% discount when ordering over RUB 1,199.
Policyholder - individuals and legal entities Insurance compensation - up to 500 thousand rubles. (for each victim) Policy delivery for Moscow residents is free
Insurance without inspecting the car or going to the office. Discounts (KBM) on MTPL for accident-free driving
Fast. You apply for a policy without queuing or going to the office; it is immediately sent to your email after settlement and payment.
Buy on credit (7)
| Company | Offer |
| Alfa-Bank credit card | application for a card |
Interest-free period - up to 100 days. Issuing a credit card is free
Loan amount - up to 300,000 rubles. Interest-free period - up to 55 days!
Up to 12 months - installment period for purchases from partners; 0% — interest on purchases in installments; Free – card registration and maintenance; 40,000 partner stores.
Up to 10% on account balance; Free cash withdrawal from any ATM in the world; Cashback up to 30% for purchases on special offers; For citizens of any country.
Cash loan to Sovcombank: Loan amount - from 5,000 to 100,000 rubles; Loan term - 12 months; Interest rate - from 12% per annum; Age - from 35 to 85 years.
LocoBank Consumer Loans: Loan up to 5,000,000 rubles; Rate from 9.4%; Duration up to 7 years;
