How to make a chair from a tire - the best photo ideas with descriptions

Dacha, how many positive emotions are intertwined in this word. For a very large group of people, a country plot is a place of creativity and relaxation of the soul. Therefore, they constantly harmonize the country space. However, not everyone’s finances allow them to do this through stores. Many people use what they have at hand, for example, to make country furniture; old, worn-out car tires will do.

Garden furniture made of tire rubber, what and how

Old tires have a fairly wide range of uses in a summer cottage; all kinds of figures of animals and birds are made from them; flower beds look good from them. Tires also make excellent pieces of furniture, mainly:

• armchairs;
• benches;
• sofas;
• country tables;
• poufs;

But in order to bring all these items to life, you will have to seriously work with your hands.

Important! Furniture made from tire rubber, due to its toxicity, can only be placed outdoors.

How to make it yourself

Tires can be used to make both simple and complex pieces of garden furniture.

1. Low tablet poufs. Manufacturing is very simple. Take a wheel, wrap it diagonally with a thick rope, the goal is to block the through hole. Then, starting from the center of the blocked hole, the rope is twisted in a spiral, and so on throughout the wheel, until the next center of the blocked hole. If the rope footage is limited, the holes can be covered with two round pieces of plywood, and soft foam seats can be attached to them on top.

2. The option is a little more complicated. Armchairs with wicker. You will need three tires. First, two of them are placed on top of each other and fastening methods are fastened together (screws, bolts, glue). After this, the third tire is placed vertically on the first two, it will act as a backrest. It is connected to the first two with self-tapping screws or bolts. But before making the overall structure in two of the three tires, it is necessary to cover the holes with weaving. This is done like this - holes are drilled along the entire circumference in increments of 3.5-5 cm, then a strong cord is pulled through them, the transverse row is intertwined with the longitudinal one. Also, to strengthen the structure, you will have to build armrests; they should start from the top point of the backrest.
3. Set of table and four high poufs. This set will require twelve rubber tires. Poufs are made as follows: two wheels are placed on top of each other, and fastened on the inside with bolts or self-tapping screws. A circle made of fiberboard equipped with a soft seat is attached to them on top. The table is mounted in a similar way, only four tires are placed on top of each other and a circle of fiberboard is attached on top. Rubber can be painted in bright colors.

There are a lot of options for furniture made from used tires. You can use ready-made sketches or make something of your own based on them, you just need to connect your imagination to this matter.

Garden, dacha and personal plots are a source of pride for the owners; here you can implement the most original design solutions, using simple landscaping techniques to functionally decorate the space, making your stay as convenient and comfortable as possible. Garden furniture occupies a special place in the landscaping process; by looking at photos with examples, you can choose the best design option, make a chair from tires with your own hands and divide the site into a recreation and work area.

Third way

If you don’t want to bother with the rope, no problem. To quickly make a seat, you can simply place an old cushion inside the wheel. In this case, also prepare:

• foam;
• fabric/mesh;
• lace or fringe;
• thick threads for sewing;
• self-tapping screws

If you want the pouf to be as tall as a chair, use two wheels. Connect them together with self-tapping screws. Cut a rectangle of foam rubber large enough to wrap around the wheel. Sew its edges. Thanks to this, the frame will become soft and beautiful.

Types of furniture structures - choosing a project for your site

Tires that have become unusable can become an inexpensive and accessible raw material for the manufacture of various pieces of furniture. If the choice is on chairs located in the recreation area, then it is important to think through the design of the structure in advance; there are many types of furniture:

• armchairs with backrests, armrests and ottomans. Stable and comfortable, they can be installed separately in the garden or next to the house, in gazebos; if desired, entire compositions and sets can be created;

• products with a combination of materials. Original chairs made from tires can be complemented by decor made from inexpensive plywood, rough and soft fabric, and especially popular ropes and cords;

• mobile and stationary structures. By equipping the chair with fittings from old home furniture, you can freely move the structure around the terrace and place it under a canopy or in a gazebo in rainy weather.

You can make a high-quality and reliable chair from tires yourself; this requires a little dexterity, the ability to use ordinary construction tools and the desire to transform the territory.

Decor options

It should be said that even for such chairs, appearance is an extremely important aspect. At the same time, it is not necessary to buy any accessories for this at an exorbitant price. To do this, you can use some old unnecessary things. For example, the same pillows and bedspreads to make the chair not only beautiful, but also soft. For example, you can cover the seat and back with padding polyester, and simply stretch decorative fabric over this material. It is better to fasten such upholstery using the simplest furniture stapler.

A number of people believe that it would be best to decorate the back with buttons and cover it with fabric of the same color. If you need to hide the staples, you can do this with laces or simple decorative edging. The surface can also be painted, which will make your furniture an even more interesting addition to the interior. And if you wish, you can make some bright and beautiful cape.

Selection of materials and stages of self-production

Having chosen the design you like from the options presented in the photographs, you need to draw up a project and strictly follow the instructions, observing the manufacturing steps to obtain the maximum result:

• selection of tools. To process wheels and durable rubber with cord thread, you will need a construction stapler, a well-sharpened knife, a set of screws for fastening, silicone-based sealant or liquid nails, a screwdriver or a portable screwdriver;
• preparation of materials. When making a chair from old tires, it is necessary to prepare several tires of the same or different diameters in advance, select additional materials for decoration and finishing, choose aerosol, facade paint that matches the textiles;
• manufacturing process. During the work, it is important to take into account safety principles, it is especially important to remember them when cutting a tire, connecting structural elements and forming the finished product, treat joints with sealant, clean open areas for applying paint;
• installation of the structure. When constructing a chair from a tire of any modification, all work can be carried out directly at the installation site; if desired, the preparation and painting of the elements is carried out in the garage, under a canopy, and their fastening in a designated seating area.

Spent rubber can be processed well, cut and has good ductility, requiring enhanced fixation. Ready-made chairs made from old tires have high wear resistance and look great in the garden or at home, on the open terrace.

Uncover

Before starting work, it is recommended to watch a video where you can see the details of making the chair

After studying the drawings, transfer them to graph paper. After cutting out the patterns, mark the plywood. It is necessary to place the elements on the surface of the sheets so that the material is used sparingly.

The material should only be cut with a suitable tool:

• for sheets less than 15 mm thick, use a jigsaw;
• more than 15 mm – circular saw.

The sheets are cut taking into account the direction of the fibers - always along. Otherwise, the edges of the parts will delaminate. If it is necessary to make a cross-section, first apply notches to the surface of the plywood using a bench knife.

The cutting tool should not be applied directly to the marking line, but beyond half a millimeter. Then, after sanding the ends of the plywood, the parts will retain the desired size.

Cutting plywood. Chair detail

The edges of each part are treated with medium-grain sandpaper. You should not skip this stage, even if the cut areas look even. There may be small, unnoticeable particles of wood at the edges, which may become embedded in the leather during use of the chair. The surface of the plywood is sanded with fine-grained sandpaper.

If, according to the selected sketch, the parts should have rounded edges, they are processed with a file or special tools: a drill with a milling attachment, a grinder.

Based on the drawings, places for fasteners are marked on the prepared elements. Drill holes with a drill of suitable diameter. It must enter the material strictly vertically. If this condition cannot be met, it is better to drill another hole, retreating some distance from the originally intended point.

After the rocking parts are ready, they are coated with a primer. You should choose antiseptic compounds that increase the resistance of wood to moisture. They wait until it is completely dry, after which they begin to assemble the chair.

An example of a quick and easy ottoman made from old tires

Knowing how to make a chair from tires, you can make several mobile ottomans yourself, for which you do not need to study a master class; their presentable appearance and ease of use will delight owners and guests for a long time. Modular structures are created by attaching one tire to another, adjusting the height based on your own preferences, and attaching a seat cut from plywood on top, which can be decorated with fabric.

On our portal, everyone can find photos and videos of the detailed production of garden furniture from a variety of materials; in the article we showed that it is not difficult to make any designs yourself, and the results will please the owners of their garden plots and summer cottages.

It is not good to throw away something that can be reused .

This is especially true for environmentally harmful materials such as tire rubber.

Used tires are a valuable material for craftsmen.

At home, in the country and in the yard you can build many interesting crafts from old tires.

The skillful hands of the craftsmen transform them into proud swans, a fence around the site, decorative wells, and comfortable benches.

How to make furniture from tires with your own hands - further in our article.

Flowerbed in the shape of a swan

Garden crafts in the shape of a swan are quite common figures, but few people use them for planting. Master class on creating a figured garden flower bed in the shape of a swan:

• One tire is used as the base and body of the bird. The tire is firmly fixed in the ground.
• The neck and head of the figure are glued along the upper edge, the wings are formed from rubber strips.
• After painting and decorative finishing, you can start planting flowers. Soil is filled inside the chamber, moistened and plants are planted.

The swan flowerbed perfectly emphasizes the overall style of the garden plot. Crafts made from tires for the garden are a great idea for those who have some patience, imagination and accumulated old tires.

Tables

There are several options for creating tables from tires. Let's look at each of them in detail.

On two stacks of wheels

Washed, dried, degreased rubber wheels without discs are first painted with acrylic, bitumen, enamel paints.

The most suitable coloring mixture for treating tires is rubber paint . It can withstand hundreds of cycles of sudden temperature changes, as well as precipitation, without cracking or deforming.

The tires are stacked one on top of the other in the place where the table needs to stand. It is necessary to install two stacks of tires 4 pieces each , preferably of different colors, at a distance of about half a meter between the outer walls.

A rectangular sheet of strong material, which is at hand, is placed flat on top of two stacks of multi-colored tires:

• flat plywood;
• plastic;
• Fiberboard;
• chipboard;
• thick safety glass;
• metal sheet.

The tabletop is fixed to the top rail of each stack with four screws diagonally at the contact points.

The edges of the sheet should protrude beyond the outer diameter of the tires by at least 10 centimeters.

The table cover can also be painted in any color pleasing to the eye.

To prevent the wheels from moving, there are two ways to fix them:

• pour earth or sand inside each stack of tires ;
• Lubricate each joint between the tires - hot bitumen mastic 1 cm thick, which will allow the tires to reliably stick to each other after drying.

Depending on the design, such a table will be perfect for a country house, a playground, or a garage.

Magazine

This type of product is made from one tire, but in larger sizes . Using the same principle, you can make stools and chairs.

Of course, it will not work as a full-fledged dining table, but it can serve perfectly as a coffee table.

1. Wash and dry the tire of the required size .
2. Find four legs from an old chair or make them yourself.
3. Screw the legs to the tire with screws.
4. Place a circle on top to cover the disk seat.
5. Decorate - completely wrap the tire on all sides with yarn or create a pattern on the tabletop.

Such a decorative table with legs will serve as an effective stand for a beautiful vase, magazines, or pocket items.

Wicker

The next method will require a little more effort and creative skills.

1. Cut a truck tire along the tread into two equal halves . One half will serve as a countertop.
2. Cut the outer beads from five smaller diameter passenger tires to create five rubber rings .
3. Using screws, screw four rings from below on four sides vertically to the table top. Using the fifth ring, connect together the vertical rings on the floor surface. This will be the reference plane of the table.
4. Use the remaining rubber strips to tightly weave the mounting hole for the disk in the tabletop.

At such a table it is perfect to play board games in the evening at the dacha or read newspapers.

Coffee table

A necessary thing in the interior is a coffee table. And if it is also made by hand and from such an unusual material, it gives it even greater value.

To make this piece of furniture you will need used car tires, a sheet of plywood or plexiglass, a drill, self-tapping screws, a glue gun, paint or any other finishing accessories.

Decide what your table will be like and get to work.

• First of all, thoroughly wash the tires and remove everything that interferes.
• We fasten the tires together using a drill and self-tapping screws. Try to make it as strong as possible, because the service life of the table will depend on this.

Article on the topic: DIY chair bed

Depending on the design of the table, you can paint it with paint, or wrap it with natural cord or rope. It is best to use paint from a can; it will lie more evenly.

If you are using a tourniquet or rope, then use a glue gun to glue it to the tire, gradually braiding it around the circumference.

Make a tabletop from a sheet of plywood or plexiglass. If your tabletop is made of plywood, then you need to cut a circle with a diameter slightly smaller than the diameter of the tire.

And if it’s made of glass, then a larger diameter than the tire itself will look better. Carefully attach the tabletop to the tire base using glue. Decorate the tabletop to your liking.

Attach the bottom of the table by cutting a circle out of plywood and attaching it to the tires with self-tapping screws. If desired, you can make wheels or legs.

And now your exclusive coffee table is ready!

To complete the table, you can make cute soft ottomans from car tires.

Making chairs

To make chairs from tires, you need to complete the following steps:

1. Prepare one whole tire - wash, dry, degrease .
2. Cut off one outer bead from another clean, dry tire .
3. Paint both blanks in any color you like.
4. to saw off four round wooden blocks with a diameter of 6 cm. Two of them are 90 cm long, and the other two are 45 cm long.
5. Cover the hole for the disc in the whole tire with a plastic mesh, sewing it to the sidewall with a strong thread. This will be the seat of the chair.
6. Stretch and sew the same mesh to the bead cut from the second tire. This will be the back of the chair.
7. Screw two short blocks on one side to the whole tire with long screws - these will be two legs. Also screw two long logs on the opposite side - these will be the other two legs with a back.
8. Using screws, screw the cut round bead from the second tire with a stretched plastic mesh to the back between two tall blocks.

Preparing wheels step by step

Before starting the work process, you need to draw a sketch of the future piece of furniture and prepare the material itself for use:

1. 
   Tires are thoroughly cleaned of dirt and washed with soapy water.

2. To clean the wheels, it is recommended to use special products that will give them a beautiful and shiny appearance.
3. Next, the material should dry well and for reliability it is recommended to treat it with a solution of acetone or alcohol .
4. To create interesting design solutions, it is worth purchasing acrylic paints .

Country chairs made from old tires

There are several options for creating a product. Let's focus on the most popular, spectacular and uncomplicated.

1. Cut off the beads of one of the tires. Cut the resulting ring on one side.
2. Cut off one third of the second tire along with the bead.
3. Paint two whole tires, one piece with the beads cut off to form a cut ring, and a second piece representing one third of the beaded tire.
4. To make one chair from bald tires, you need to stack two whole tires on top of each other.
5. To fix the joints between them, it is necessary to coat them with hot bitumen mastic . Glue or sew a plastic lattice onto the top tire with a strong thread.
6. Screw or bolt vertically one third of the tire with the bead at the bottom to the top tire .
7. screw the middle with the cut off beads to the top of the vertical one-third of the tire with the Bend this part into the shape of the back and handrails of the chair.
8. Secure the lower ends or bolts to the upper lying tire.

It turned out to be a very comfortable chair made from tires for a summer house, a private farmstead, or a recreation center.

It is best to build several of these chairs for all family members.

Another chair option:

1. You will need one whole tire, and from the second tire you need to cut a sector the size of one third .
2. Wash both parts, dry them, and paint them with black rubber paint.
3. Find legs from an old chair or from a Soviet TV. Screw the legs to the bottom of the whole tire with screws.
4. Saw off two or three wooden blocks measuring about 5x5 cm, 40 cm long. Sand and paint with black rubber paint.
5. the hole for the disc in the whole tire with a plywood circle covered with leatherette. This will be the seat of the chair.
6. The inner cavity and ends of the second tire with the cut out sector are also covered with plywood and covered with leatherette . This will be the back of the chair.
7. Assemble the structure: screw two or three bars to the tread surface of the whole tire with screws.
8. The backrest is also screwed higher to the bars.

The result is a cozy chair with a minimalist and laconic design.

It can be as in the photo or slightly modernized depending on the materials that are at hand.

Why not an impressive leather chair from a designer furniture showroom!

It’s not a shame to furnish not only a country courtyard, but also the creative interior of an apartment or house.

In Europe, such furniture in residential premises has long been not uncommon, because the environmental trend is gaining popularity every year.

Bottom part

In order for an ottoman to look beautiful, it needs legs. They can be purchased at a furniture fittings store. The legs can be replaced with wheels, then the ottoman will be convenient to move. By the way, the legs will give the ottoman the extra height it needs to make it comfortable to sit on and get up from. Therefore, before you buy them, you should estimate their required height.

The result of work does not always depend on professional satisfaction

In Italy there are victims of the “House for 1 Euro” campaign, and these are not buyers

Job search and burnout: sending your resume in a measured manner (avoiding panic)

The remaining plywood circle must be wrapped in the same material as the seat. There is no need to lay a soft middle. The material is also fastened with a stapler, but before doing this, spray adhesive should be applied to the plywood. Then, having marked the axes and location of the legs, this part should be placed on the bottom of the ottoman, coated with glue, and with self-tapping screws of sufficient length, attach both the legs and both parts of the bottom to one another.

Other furniture and crafts

At the dacha, every item, every useful thing is welcome. The spirit of fantasy and creativity is in the air here. Every seemingly unnecessary item will always have its own use. Worn automobile tires are a valuable material here, a strategic raw material.

It makes excellent swings for children, front gardens for flowering plants and green spaces. Tires are used to make brightly colored houses.

Benches for sitting, rocking chairs, funny bugs and striped caterpillars, flowerpots - this list of uses for old tires can be listed endlessly.