How to make a bar stool with your own hands, expert advice

The layout of individual apartments is always different, as is the area, and often this applies specifically to the kitchen. The size of the kitchen may be familiar (several squares), but often this room is converted into a studio. Be that as it may, a bar counter is installed in such kitchens; it not only looks stylish, but is also practical - today, few families find themselves together at the table. And if there is a counter, then you also need bar stools. How to make a bar stool with your own hands?

Making a bar stool with your own hands

How to make a bar stool with your own hands

Why on your own?

Of course, we are not saying that you should forget about furniture stores and instead make all your furniture yourself. But if you look at the photographs of bar stools that can be found in numerous catalogs of furniture stores, you can conclude: you can actually make such a chair yourself !

Bar stools are easy to make with your own hands

In addition, pieces of furniture made by yourself can become a true decoration of the home, pleasing not only the eye, but also the soul.

On a note! In this case, there are also more possibilities, since you decide for yourself which option is best suited for the interior of the room. There is no need to mention once again about people who like to work with their hands.

Original bar stools

Photo

Ideas for decorating the resulting furniture and its use can be seen in the following photos:

We decide on the structure and design

First of all, decide on the size of the chair. Its height, for example, will depend on the height of the bar counter itself. Also remember that your bar stool should not only be attractive, but also comfortable in all aspects. Once you have decided on all this, proceed directly to the design.

Bar stool with adjustable seat height

To be honest, you can start with the appearance, but then it may turn out that due to ergonomic features some adjustments are required.

Simple wooden chairs without backs

As for the design, first of all, decide how many legs the chair will have and whether there will be any at all. The best option is a product with four legs . It is easy to manufacture, convenient and reliable.

A chair with four legs is more reliable and easier to make

Important! A chair with a back will be even more comfortable, especially if you add armrests to it. If you plan to sit on such a chair during meals, then think about the backrest in advance.

Chairs with backs are more comfortable.
Pay special attention to the upholstery (if it is planned). A chair made entirely of wood will fit perfectly into almost any interior, and after varnishing/painting it will also look good in other cases.

Loft style bar stools Intricately shaped bar stools Bar stools with armrests

Chairs with soft covers

Bar stool White wood bar stools Wooden seat with metal legs Another simple bar stool

Colorful bar stool

Gray bar stools Chair with lacquered wood seat

These chairs will decorate any room

Decoration methods

To give your bar stool a personal touch, you can decorate it in a variety of ways. Thanks to the variety of colors and prints, seat upholstery made of leather or textiles (jacquard, microfiber, silk) will make the furniture a bright element of the interior. Covers will be an excellent solution for those who do not want to deal with covering. They are practical and can be replaced at any time.

Decoupage is becoming increasingly popular when decorating furniture. It is used when working with wood as follows: the surface is cleaned with sandpaper, covered with putty and painted, then decorations from napkins and flower pictures are glued on. Finally, the product is varnished.

If your creative abilities are not sufficiently developed or you simply don’t have time, then you can decorate the chair with bright colors, which will also make it unique. An interesting solution would be to use jute rope - you can wrap it around structural elements. The choice of decoration methods is huge. It all depends on tastes, desires, abilities, imagination. Be that as it may, a bar stool made and decorated with your own hands will become the highlight of any interior, the pride of the master.

Decoupage technique

Covered with jute rope

In a case with a bright floral print

More details about bar stool height

Nothing is known about the creator of the first bar stool. One can only guess that it first appeared around the time when, instead of the usual partitions between visitors and the seller, high (1.1-1.3 m) counter tables with comfortable tabletops began to be used. Visitors to drinking establishments no longer had to leave such counters.

As a result, an ordinary “tripod” chair was transformed into a bar stool. For more noble bars, they were made from valuable wood, trimmed with leather and fabric; the poor public was content with cheap options. But even despite their practicality and high “stature”, all types of bar stools remained in the shadows for a long time due to their lackluster design.

Standard height of bar stool and counter according to GOST

GOST 17524.2-93. Furniture for catering establishments. Functional dimensions of seating furniture .
Downloadable file (click the link to open the PDF in a new window). GOST 17524.2-93

Everything changed in the fifties and sixties of the last century, when high chairs became fashionable and attracted the attention of large enterprises. Much has changed since then, today the designs are very diverse: there are models with and without armrests, with backs, rotating and static, soft, with removable pillows and without upholstery... Changes have also affected the material of manufacture - now they use not only wood, but also chrome, aluminum, plastic. And the variety of decor allows you to use it for all possible stylistic solutions!

Despite all this, when choosing a bar stool, its convenience is of great importance. Due to the center of gravity, which is shifted forward (the visitor rests his elbows on the counter), the support is not the back, but the footrest. For this reason, the backrest is more a tribute to tradition than an ergonomic condition.

As for the seating height, it, as noted earlier, depends on the height of the bar counter, and therefore modern chairs are either produced in two sizes (Th and Bh), or are equipped with a gas-lift mechanism , thanks to which you can easily adjust the height seats (within 54-85 cm).

What happens if you choose the wrong bar stools?

Color accents

You can arrange the bar counter as follows:

• in the classic version , the color of the kitchen set and furniture in the living room combined with the kitchen are the same;
• a contrasting option - the counter can also stand out sharply in color from the rest, which is combined with modern room decor and current high-tech, loft and modern styles.

To focus attention on the bar area, you can highlight it with lighting fixtures. The imagination and skill of the designer will allow it to be used both for space design and for zoning. Color solutions play an important role in this.

Which tree to choose?

If you are planning to make a wooden bar stool, then remember: it will require about 10 ready-made elements. The same applies to structures made from other materials.

To make your own chairs, it is better to use wood.

When choosing a material, give preference to hardwood (such as oak, maple, beech). In principle, wood is best suited for self-production (although there may be exceptions, which we will talk about later) in terms of the “effort-to-result” ratio. Moreover, wooden chairs will look great in an apartment/house.

The wood for the chairs must be hardwood

Having chosen a suitable drawing or drawn it up yourself, get the materials. Everything you need is sold in construction supermarkets or hardware stores, while you can order the chair parts ready-made in the workshop. If you indicate the required dimensions, they will quickly and inexpensively cut out all the required parts of the structure.

You can order ready-made parts for bar stools in the workshop

On a note! There may be more details - it all depends on the chosen design. In addition, upholstery materials can be added. Also, after assembling the chair, it is recommended to impregnate it with a primer (if it was not covered with paint/varnish) to protect it from moisture.

The design of bar stools can be different. Chairs need additional processing after assembly.
But when making a metal bar stool, some difficulties will arise. This option is suitable for craftsmen who are accustomed to working with metal, have all the necessary tools and are able to make all the parts themselves. Additionally, you will need to do some welding if there are no connectors for fasteners.

Making metal bar stools harder

A wooden product, unlike a metal one, is easier to assemble - for this you will need a hacksaw, a screwdriver, self-tapping screws and sandpaper. Of course, the description is very superficial, but it shows the difference well.

Country style bar stools

Use of profile pipes

This is a fairly simple option for quick results. Such assemblies look original and fit many stylistic solutions.

At the initial stage, the main frame is assembled from the profile, which is supplemented with the necessary furniture and elements.

The sequence of this work:

• Prepare pipes, plywood or chipboard sheets using tools: pipe benders, screwdrivers and drills, upholstery materials and a stapler;
• Elements of the product are cut out according to the selected design;
• The upper sections of the pipes are carefully bent in the shape of a semicircle;
• Bent parts are connected using fasteners and a screwdriver;
• Using a jigsaw, cut out the seat;
• As planned, the foam rubber is glued, covered with fabric, using a stapler from below;
• Bolts are used to attach to the frame.

The legs are equipped with plastic plugs to prevent scratching the floor.

Another option is to assemble the frame using metal corners or an iron frame from an old bed.

Based on the photos of handmade bar stools, you can choose your best option based on your individual capabilities and preferences. After all, not everyone is “friendly,” for example, with a welding machine.

Features of making a bar stool

Despite the huge number of ideas (both in specialized magazines and on the Internet), the most important thing in all cases is the correct measurements.

The most important thing is the correct measurements

First, decide what the height of the chair will be. It is recommended that the height from the seat to the tabletop be approximately 35-40 cm. Having determined the height, draw up a drawing or use a ready-made one (choose the appropriate option).

What determines the height of a bar stool?

On a note! To make the simplest bar stool, you will need 4 legs, the same number (preferably) of legs and, in fact, a seat. If a backrest is planned, then the back legs should be about 30-35 cm longer (they will serve as the basis for the backrest).

Bar stools, their features
It’s easy to make a mistake at any stage of manufacturing - both when preparing parts of the structure and during measurements. Therefore, it is recommended to double-check all measurements several times before entering them into the drawing or cutting off an unnecessary part.

Check measurements several times when making chairs

The ready-made drawings already mentioned above will help with this, which is more important for people who have not designed anything before. Don’t rush, try not “for show”, but for the result!

You can make a bar stool using ready-made drawings

Photo example of making a bar stool (master class)

Drawing up a drawing

You can't create products blindly. A drawing with exact dimensions is required. The standard sizes of bar stools are as follows:

• seat height - up to 85 cm;
• seat width - from 30 cm;
• The minimum distance between the legs is 40–45 cm.

Patterns for knitting covers for chairs and stools, stages of work

Some models require a backrest. Its height should not exceed 25 cm. All measurements are made on the drawing. Dimensions cannot be changed during assembly and preparation of parts.

The height can also be adjusted according to the height of the stand itself. The distance from the floor to the seat is equal to the height from the floor to the table top minus 30 cm.

The working drawings indicate the dimensions and main components. If you are going to make a flowing product, then all the parameters are already indicated in expanded form. The diagram itself can be obtained in several ways:

1. Downloaded from the Internet. No one can guarantee the correctness of these calculations. There is a risk of wasting materials and getting low-quality results.
2. Create in a computer program. The program allows you to create an accurate drawing of the product. Skills in working with such software are required.
3. Draw it yourself. The easiest way. You will need a piece of paper and a pencil. But it is advisable to check all calculations several times.

Correct drawing is the key to a good result. Therefore, you should not take the first thing that attracts your attention. If the choice fell on an option published on the Internet, it is useful to familiarize yourself with the results of those who have already used this option in their work.

Option No1. Simple wooden bar stool

The first thing you have to think about is how will the seat be, hard or soft? If you don't know which option to choose, do a firm sit like the example below. In the future, you can upholster it with any available material (fabric, leather, etc.) at any time. The diagram below shows the design and dimensions.

Scheme of a wooden bar stool with dimensions

Step 1. For the legs, use wood 5x5x71 cm (in our example it is poplar). Reduce the chamfers/angles at both ends by about 5 degrees so that the legs are angled relative to each other. For connections, drill pocket holes.

Making chair legs

Step 2. Attach the bottom/middle strips by chamfering in the same way (all at the same 5 degree angle).

Installation of cross bars

Step 3. Having fastened all the parts that are parallel, start screwing the transverse partitions to one of these sides. Do one side first, then the other.

Fastening perpendicular partitions

Step 4. When attaching the partitions, take into account the fact that it should be comfortable to place your feet on them while using the bar stool. This is a must.

The process of attaching partitions

Step 5. The seat will have a special shape, which will make the chair even more comfortable. Mark the end of the board that will be used for seating. To get the desired shape, use a circular saw, adjusting it to different cutting depths; although it is quite possible to use a regular saw. First, cut the recesses, and then remove the excess wood with a chisel.

Excess wood is removed along the recesses

On a note! The process, of course, is quite complicated, and therefore, if you have something better at hand, you can refuse the chisel. Once done, thoroughly sand all surfaces with a sander.

Step 6. In the end, all that remains is to connect the legs to the seat. For this purpose, drill holes in the upper part of the legs, make the same ones at the bottom of the seat, and then, using glue, place all the parts on the pins.

Connecting the legs and installing the seat

Sand the surfaces of the finished bar stool using sandpaper. If necessary, seal the holes with putty. Next, you can paint the chair or, alternatively, varnish it.

Step 7. That's it, a simple bar stool is ready (and in our example there are three of them). This design - thanks to the proper placement of perpendicular crossbars, comfortable seating and selected height - may well become the most favorite and comfortable place in the house! Would you like to make the same chair? Feel free to get to work, because nothing could be easier!

This is what finished wooden bar stools will look like

Useful videos

In this video you can see how to solve the problem if you want to install a bar counter outside, within an open summer kitchen. It is enough to find a snag in the forest, as well as dry thick branches and install a board on them.

BAR COUNTER MADE OF WALNUT SLAB, STABILIZED WITH EPOXY, PRIMER AND VARNISH

Many people are interested in the question of how to make a countertop for a bar counter yourself. The next video shows a tabletop in the form of a mosaic. Here it is shown and explained how it is done.

9 mistakes in a kitchen with a breakfast bar

Option No2. Backless bar stool with metal legs

Let's look at the process of making a simple chair made of walnut (seat) and metal. An old bed frame was used for the legs. The height of the structure is approximately 64 cm.

A simple bar stool that we will make

A distinctive feature of this option is its shape, which makes it easy to weld and strengthen pieces of metal. If you are planning to use a welding machine for the first time, then in the process of making such a chair you will definitely gain valuable experience and learn how to cook well.

The wooden part is made of walnut

Step 1. Start by creating the shape of the future structure. Cut a suitable material (for example, chipboard) into four parts of 54.5x23.2 cm. All elements are fixed with a side joint using screws, resulting in a square “pipe” 58.5 cm high and sides 20 cm long.

You need to cut out 4 identical parts. You get a square “pipe”

Step 2. Make an angled base for the mold using a piece of 9.5 cm thick board. You will need to cut the pieces at an angle so that they all fit. To do this, find a suitable angle using a tape measure and set it so that everything fits. As a result, after cutting you will get beveled edges.

First, a suitable angle is found. The desired angle is set. You can start cutting.

Step 3. Fit the pieces with the edges cut at an angle of 45 degrees around the perimeter of the base part. Attach the beveled base using plywood and small nails, as in the photo below. You do not connect this part to the “pipe”, and therefore it can be easily removed if necessary.

The segments are adjusted around the perimeter. Everything needs to be carefully controlled. The parts are attached with pieces of plywood.

Step 4. Thanks to the made shape, you can easily determine the location of the legs. No changes are required, just attach and mark.

Future legs just need to be applied

The first leg is applied

First, mark and cut the legs from the bottom. To make the process easier, you can hang a corner of the base over the edge of the table and then secure the iron piece in place. Then cut off the bottom ends.

The corner of the base can be hung over the edge of the table

The lower end of the leg is cut off

The cut leg is attached

After this, place everything in the mold and begin marking the upper ends of the future legs.

Next, mark the upper ends of the legs

Step 5. For the top of the structure, use 4 corners. Mark everything you need using the square you made earlier. Glue the pieces together, then remove them from the mold in order to fit the weld on each side.

For the upper part, 4 corners are used. The parts are glued together. Now the parts are welded together.

Important! It is better not to place a vice, as in the photo, on wood. Because the bolts that hold everything together can fly out, and everything will have to be redone.

It's best not to put a vice on wood.
Step 6. Cut a few more pieces of metal to make a footrest. In our example, the length was approximately 30 cm and the angle was 45 degrees.

Let's start making the footrest Ready footrest

Step 7. The support with footrest was held with the top of the structure and blocks for the supports. Weld everything together. Weld a metal pad on the bottom of each leg. Upon completion of the work, sand everything with sandpaper (recommended grit - 40).

The support is welded to the legs of the future chair. Metal pads are welded at the bottom.

Next, everything is processed with sandpaper.

Step 8. Now it's time for the walnuts. Cut the main part into 2 thick boards and sand them with sandpaper. To sand beveled edges, use sandpaper with a grit size of 100-220.

We begin to make a seat for the chair The wood is cut into 2 parts The boards are processed with sandpaper The wood also needs additional processing

Step 9. Treat the frame of the future structure with a primer, then with black paint. Finally, attach the wooden seat to the pre-drilled holes using screws.

The seat is installed, the bar stool is ready for use

Video - DIY wooden bar stool

Do-it-yourself bar - options and methods of work

A classic bar counter is a tabletop placed near a wall or furniture (one edge is attached to a vertical plane). The second edge of the bar table rests on a metal pipe.

For the table you may need:

• a wide board, and it is desirable that it is not coniferous, since the latter is too soft for work and further use of the product;
• thick plywood - this material allows you to apply any decor after manufacturing, including tiled elements, plastic or mosaic.

Drawing of a simple bar counter
The material can be taken from the same company where the custom-made furniture was made (if it was made according to sketches). If there is factory furniture in the room, you need to take a photo with you and compare it with the samples offered in stores and workshops.

It is better to purchase furniture fittings in specialized stores. The choice is wide, and the prices also vary. In particular, pipes can differ in price by three times, and this is due to the quality of the items offered.

Accessories for the bar counter

Chinese fittings can lose their appearance quite quickly, while German ones have a long warranty, up to a lifetime, which, of course, affects the price of the product. Polish products are in the middle between these groups and are therefore quite universal.

Thick board stand

If the choice of base fell on a thick board, and the pipe was already purchased at the store, you need to decide on the fasteners. You can use a stop attachment for these purposes - it is placed under the table top on the pipe, and then this place is covered with a decorative part in the form of a ring. There are other elements that you can take advantage of. When the tabletop is fixed to the wall, corners are taken, including reinforced ones. The color of the corner should match the pattern and shade of the table. At the same time, you need to install the fastening part so that it is invisible. To do this, remove a few centimeters from the edge.

The base of the tabletop can be placed on supports of any thickness

Elements that hold the shelves in weight can be placed under the solid table. If the bar is located along the plane of the wall, decorative brackets are used for fastening. A few pieces are enough for a standard countertop. The following is a brief description of the process of assembling such a structure.

One large corner or several small ones act as fasteners.

Brief job description

First, the base of the table is prepared, the edges are rounded, then it is sanded, tinted and varnished at the final stage. In addition, before starting work you will need:

• bar support;
• fixing part;
• holders.

Sanding the tabletop
First, the tabletop is placed on a support, then the corners are attached to the edge of the base. Then reinforcement with flat self-tapping screws is used. At the first stage, the work takes about seven minutes.

Attaching the table top to the wall

After the base of the rack is ready, you need to place it against the plane of the wall and mark the places where the dowels will be located. The location of the fasteners is marked on the floor. Next, a support is built according to the marks. Dowels are also placed in the wall.

The stand is placed in the selected location and secured with screws. The bar table is ready for use.

Simple bar counter

Option No3. Wooden bar stool with round seat

Another great option, but, compared to the first, much more difficult to implement. But first things first.

We are considering another option for making a bar stool

Step 1. First, prepare the necessary lumber. It is better to use a block with a section of 30x30, although in our example we use 30x40 due to the lack of a suitable one on sale. All this will cost a very reasonable amount.

First you need to buy all the necessary materials

Step 2 : Start cutting. Prepare 4 bars 45 cm long, another 4 - 57 cm.

First of all, the bars are cut

Step 3. First of all, make 2 blanks from bars of the “long-short-long” type, then glue 2 more short ones between them. By the way, in our example, in addition to clamps, clamps from a circular saw and a grinder are also used.

A pair of short bars are glued between the blanks

Step 4. Make a milling box from the leftover boards and plywood. It is necessary that the 8-gauge stud goes through the entire rack (although it is better to use larger diameter bolts to minimize vibration). In the example, the stud is tightened with nuts; the workpiece rotates inside the box when the nut is constantly tightened. Ideally, it is better to make a cutter for this, which rotates the blank by 10-15 degrees.

Stages of manufacturing a milling box

Step 5. In the end, you will carve a stand like this.

Turned stand

Step 6. Start making the seat and footrest. They will be round, their diameter will be 31 cm. For greater strength, you can glue them together from two panels, placing the lamellas across each other.

These parts are glued together from two panels

Step 7. Cut a ring from plywood using a router. With this ring you will process the outer edges of the footrest and seat, as well as the inside of the latter.

Using a plywood ring

Step 8. Something like this. The inside was milled using a copy sleeve, and the outside was done using a milling cutter with a bearing.

Photo of the manufacturing process of the seat and footrest

Step 9. Mark the footrest - place the central post in the right place, then trace the outline.

Footrest markings

Step 10. Mark in the corner where exactly the vias need to be made. By the way, a feather drill can “tear” wood; if this happens, you will be forced to putty a lot.

The locations for drilling via holes are outlined.

Step 11. Using a thin drill, mark the point where the pen tip will pass. Next, use a feather drill to make holes of the required diameter, cut out sections with a jigsaw, and then level everything with sandpaper on a block.

Stages of making a footrest for a bar stool

Advice! Experts recommend first making a plywood template and milling out the holes - in this case, you can get a higher quality cut and reduce the amount of work with sandpaper.

Step 12: This is what the wood will look like after filling the gaps left by the feather drill.

Photos of wood before and after treatment

Step 13. Glue the leg blanks from the bars.

Gluing leg blanks

Step 14: Shape them using a plywood template. Be careful and securely fasten the template with nails, otherwise it may be torn off the workpiece.

Plywood template torn from the workpiece

Step 15. Glue the crosspiece, assembled on the grooves, into the seat.

Gluing the cross into the seat

Step 16. Make similar grooves in the legs to assemble them.

Grooves are formed in the legs of the chair

Step 17: After routing the edge, begin assembly.

Finished legs of the future chair

Step 18 Sand the seat with extreme care.

Polished seat

Step 19. Pre-assemble the bar stool (without glue) to try on the parts.

The structure is assembled without glue

Step 20. Connect all the parts together.

Connecting chair parts

Step 21. After final assembly, apply stain and varnish to the glue. The result you get will definitely please you!

This is what the finished chair looks like

Table. The cost of making such a bar stool.

On a note! In general, making such a chair will cost about 1,400 rubles.

How to avoid making mistakes while working?

In any business, mistakes can be made, and this also applies to making a bar stool. Moreover, some of them can be corrected with the help of certain manipulations, while others can ruin the entire product. That is why experts recommend taking great responsibility when drawing up a preliminary diagram.

For example, it is better for beginners to take as a basis a ready-made chair project, where all dimensions are marked. After all, when taking independent measurements, you may not take into account an extra couple of centimeters, which is why the product will turn out uneven. In addition, the more accurately you can calculate the dimensions of future parts, the easier it will be to determine the required amount of material - this in turn will reduce costs.

A detailed drawing makes the work much easier

Another common mistake novice craftsmen make is the desire to make a product that is too complex. Therefore, if you do not have any experience with similar designs, then it is better to take as simple a chair as possible as a basis. Thanks to the experience of working with such a simple design, later you can easily proceed to a complex one.

In fact, you can make any bar stool design with your own hands - for a craftsman with some experience, the work process will not take too much time. The most important thing in this matter is not to rush and follow all the instructions.

You can read more about making a bar stool with your own hands in our article.

Option No4. Chic metal bar stool

Let's consider another interesting option for making a bar stool. It looks attractive and original.

Metal bar stool - decoration for your kitchen

Step 1. Draw a pre-prepared shape on a piece of thick asbestos sheet that is used for welding (red lines in the photo).

Applying markings to an asbestos sheet

Step 2. Cut according to the sketch of the workpiece, using a 2.5 cm strip.

Blanks are cut according to the sketch

Step 3. Weld the parts together, as shown in the photo below.

The parts are welded together

Step 4. Select the internal layout. Let’s be clear right away that this stage can take a lot of time. Use the same strip for shredding.

Internal layout is selected

Step 5. Weld the parts and clean them. Also, round the corners.

All elements are connected

Step 6. Proceed to the most important task - start welding the legs. Use a 3x2 cm profile for this.

The legs are welded

Step 7. In our example, the author did everything by eye, that is, he did not make a drawing, did not measure angles, etc.

Leg welding process

Step 8. First, grab the legs at 1 weld point, then gradually move them apart to the required positions.

First, the legs are welded to one weld point

Step 9. This is what you will get as a result.

This is what should happen

Step 10. Mark the level at which the footrest will be located. Try it on yourself, you need to feel comfortable. In our example, this is 45 cm from the seat.

Indicates the level of the footrest

Step 11. To make stops, use the same 3x2 cm profile.

The same profile is used for the stops

Step 12. Make tricky slant cuts for them, then weld them.

The stops are welded Another photo of the process

Result of work

Step 13. Place special plastic plugs designed for steel profiles on the legs. Although you can, as in the example, make special “heels” from wood: they will also not scratch the floor, but they can be sharpened if necessary to ensure stability for the bar stool.

Making wooden plugs for legs

Step 14. The part of the cork that will fit inside the profile should taper.

Narrowing of the inner part of the plug

Step 15. Such plugs will be held in place only by friction. No glue or screws are needed. Sand the corks to fit the legs.

Ready-made wooden plugs for legs

Step 16. The rough version of the bar stool is almost ready.

Draft version of the chair Same, top view

This is how the chair will look in the interior.

Draft version of a bar stool in the interior

Step 17. Start painting the product. First, apply a coat of primer.

Primer is applied first

Step 18: Paint everything below the seat black.

Legs painted black

Step 19. Protect the black parts of the structure with something. This way they will not get dirty during subsequent painting.

The black parts of our chair need to be protected. The legs are wrapped in film.

Step 20. In our example, such a cardinal color was chosen for the seat.

Painting the seat red

Step 21. That's it, your DIY metal bar stool is ready for use!

That's it, the metal chair is ready for use.

Video - Another option for a metal bar stool

Video - Original do-it-yourself stool

Photos of DIY bar stools

Dark wood bar stools for island kitchen Bar stool made of bars Bar stools with bicycle seats Bar stool made of metal pipes High chairs for the kitchen High three-leg stool

Rustic bar stool Wooden bar stools Elegant bar stools By the way, bar furniture is a little smaller than usual, so classic four-legged bar stools will require more space

DIY metal bar stool Simple wooden bar stool The most comfortable bar stool Pallet chairs

Photos of DIY bar stools Photos of DIY chairs

Required Tools

Before you begin, you need to stock up on the following tools:

• pencil for marking,
• roulette,
• square,
• hacksaw,
• sandpaper,
• fasteners for legs,
• drill,
• drills 3 and 6 mm,
• glue,
• self-tapping screws (5x20, 5x30, 5x80),
• bit,
• hammer,
• screwdriver

Standard dimensions of bar stools are calculated based on the distance from the bottom surface of the tabletop to the floor.