The knife stand can be horizontal, vertical and made of wood, plastic, plywood and even old books. The most practical is considered to be a stand with a filler: you can choose the appropriate color and shape of the product, it lasts a long time, does not cause allergies, but requires periodic disinfection.
In second place in popularity are magnetic holders: they save space, keep knives clean and prevent the formation of rust spots on them.
Wooden coasters are considered classics, but they have several disadvantages: they absorb moisture and odors, can accumulate colonies of pathogenic bacteria in the holes, and crack over time.
If you use your imagination, you can make a stand from scrap materials - a thick glass glass with beans, rice or pasta as a filler, old books, plywood.
Knife holder with filling
You can make an original knife stand with filling with your own hands. At the same time, it would be nice for her to come up with an interesting design that would match the interior of the kitchen. For this device, you should select suitable materials and take into account some design features of the housing.
Fan stands look very interesting with a series of shades PHOTO: knifecenter.com
Making the base: possible options
The container, which will play the role of a stand for kitchen knives, can be made of different materials that differ in texture. For example, the housing for an accessory is:
- from a plastic pipe of sufficiently large diameter. Typically, a previously unused sewer pipe (residue) is used for this purpose. In order for the frame to be complete, stubs are also used. A similar DIY plastic knife stand can have a spectacular decoration in the form of a painting or an accessory;
- from wooden blocks . To do this, you will need five pieces of material of the same thickness. Using separate walls, you can form a parallelogram, which will become the basis of the stand;
- An old book or any culinary collection that you do not use can also serve as a base But there is a drawback - you cannot store wet, just washed knives in such accessories.
The stand itself can be made from other materials, for example, used wine bottles, measuring cups. Sometimes even unnecessary piggy banks are used.
Don’t forget to make a preliminary drawing PHOTO: golos.id
Types of fillers
You can use anything you can get your hands on as fillers. The main thing is to make the structure reliable, airtight and convenient for inserting tools. Among the available materials are the following.
- Bamboo sticks. A sufficient number of them will be required. It is necessary that the material occupies the space in the stand as tightly as possible, of course taking into account the fact that additional knives will be placed inside. Please note that the length must be sufficient for the blade to fit completely.
- Cereals and legumes . They look impressive in a transparent stand, especially if the layers alternate. Peas or beans of different colors are often added. This decor becomes truly interesting and accents the kitchen. Long grain rice absorbs moisture well, so you can insert knives into it immediately after washing.
- Plastic bristles from brushes . To install the knife stand inside the brush, you just need to cut it off in solid bundles. One brush may not be enough for this purpose. To seal the insert, you can use two or three tools.
- Sawdust or small wood shavings . A DIY knife holder with this filling is intended exclusively for dry tools. If you place a wet knife inside such a stand, mold will soon form inside.
Original separate stand for dessert knives PHOTO: m.123ru.net
What else to consider when choosing
When choosing, you should pay attention to the quality of the material, both the body and the filler.
- The wooden case must be made of hardwood - bamboo, cedar, beech.
- Metal – made of stainless steel, the quality of which is confirmed by certificates.
- Plastic - made from a modern material that has increased strength, stability, is evenly colored and does not emit an unpleasant odor.
As for the internal filling, check that the ends of the fibers have an even cut , otherwise the blades may be damaged.
You should also carefully study the instructions - some fillers are intended exclusively for metal knives. Undoubtedly, the main condition for the purchase is the ability to easily remove the filler for washing and disinfection.
DIY wooden knife stand
Making a wooden knife stand with your own hands is easy if you have ever encountered carpentry or carpentry work. It is important to prepare inventory, all the necessary details, so as not to miss anything during the work.
Wall-mounted shelf stand with open structure PHOTO: samodelki.org
Original separate stand for dessert knives PHOTO: m.123ru.net
Wall model in the form of a shelf
To make this model, you will need a small amount of wooden boards or blocks, as well as self-tapping screws and an electric screwdriver. A jigsaw (they work faster) or a hacksaw may come in handy. Follow the algorithm to make the accessory correctly.
- Take two boards of the same perimeter with a thickness of 15-20 mm. On one of them, make a sketch of the blades of the knives that will be stored in the stand. To do this, place the knives one by one and outline the blades themselves with a pencil.
- Do this so that in the future there is a small distance of 3-5 mm between the tools. This is done to ensure that the knives do not touch.
- Cut out the sketches, going only 2-3 mm deep. Take into account the thickness of the knife. You can make the holes a little wider.
- Then make a lattice from the second plank so that the blades of the knives are completely visible. To do this, you can install additional strips between the niches for knives.
- Attach three horizontal strips on top of them, which will serve as stops so that the knives do not fall out.
All fastening actions do not have to be performed with self-tapping screws. They are often replaced with good wood glue. After gluing, the do-it-yourself stand for kitchen knives must be left for a while for more thorough drying. As a result, excess material is removed, and the surface is sanded and varnished (optional).
Instead of a cutting board on a stand, it is appropriate to use modern gadgets for video communication PHOTO: fdforp.com
This stand is suitable for watching a video or movie on a tablet while cooking PHOTO: chipchick.com
On a note! When creating a stand from bristles, in order for the material to be glued evenly, it is necessary to install it in a circle, ending in the middle.
Tabletop model with legs
In fact, it’s quite easy to replicate factory-type wooden stands with your own hands. To do this, it is enough to have only a block of the desired shape, a chisel and a small list of tools.
- Take a block with a side of 15-20 cm. It is important that it is not hollow inside.
- Using a plane and chisels, make an inclined parallelepiped from it.
- A block cut at an angle will act as a solid stand.
- In the resulting figure, cut a groove from the outside; a small shelf-holder for a cutting board will be inserted into it.
- Then, in the upper part of the workpiece, cut several holes with a chisel or on a machine, matching the shape of the knife blade. Make as many niches as you plan to store tools.
- Then cut a rectangle with the prepared cutout from a small piece of plywood. Lubricate the groove for this shelf on the stand itself with adhesive. Next, attach the holder with the cutout to the top.
- Open the prepared stand with varnish; you can additionally decorate it with an emblem or sticker.
In such stands, knives can be placed in any convenient way. Form a pattern, for example, if the number of PHOTOS allows: fissman-group.ru
Insert the knife into the holder only after you are absolutely sure that it is dry.
On a note! Be sure to make small holes on the back of the accessory in the places where the knives will be inserted. This will allow the instruments to be well ventilated, even if drops of moisture remain after washing.
How to make a knife stand with your own hands from plywood
A homemade knife stand can be made from plywood. By the way, this is the material that everyone can find in their household. This design does not have any difficulties. It is very important to use the right equipment.
Why not use multilayer plywood to create a niche for kitchen knives PHOTO: chinasalesbay.ru
List of materials and tools
To work you will need:
- small plywood. But, of course, it is better to have some reserve;
- electric jigsaw;
- marker or paint stick;
- reliable wood glue.
If the plywood does not have a tint, then the finished stand is additionally painted. However, in most cases the model is left in the original color.
Step-by-step instructions on how to glue a knife stand in the shape of a person
Below, our editors suggest studying photos and descriptions of how to make a knife stand with your own hands.
| Illustration | Description of action |
| Create a rough sketch of the man on plywood using a thick marker that dries quickly. The shield for the stand is drawn separately, and the “warrior” separately. | |
| Take a jigsaw and cut out the shapes one by one. You can deviate a little from the drawing to make the shape of the product smoother. | |
| We make a stand on which the little man will be attached. It can be free-form. For example, a model with cut-out edges looks very interesting. | |
| Sand the edges and round them. To do this, you can use shaped cutters. | |
| We separate the man's head a little from the mane. To do this, use a grinding machine to cut off the excess so that the comb is thinner than the head. | |
| Taking into account the thickness of the blade of each knife, we make small holes with a drill. Next, use an electric blade to make a slot between the two holes. | |
| We drill a small hole in the character's outstretched hand. We do the same with both legs. We make holes in the stand at the distance of the legs. Then we insert special beads and fix the parts together. To ensure secure fastening, additionally coat with glue. |
On a note! Oversized narrow knife stands can be placed in a separate drawer from other cutlery. It is important that the cutting parts do not come into contact with any other kitchen tools.
Product options for other tools used in the kitchen
A knife in the kitchen is certainly an alternative helper, but there are other tools that we find it difficult to live without. In this section we will talk about what holders for sharpening tools and scissors can be made from. But first things first.
Elementary creation of a stand for scissors
You can make a stand for scissors with your own hands from different materials, including wood. Some people practice the following option - drilling an additional hole for inserting scissors.
Make coasters in the shape of any animal. Wooden models can then be painted with paints PHOTO: www.pinterest.fr
If you have to store a sufficient number of tools, then you can separately make a version of holders similar to those for knives. You'll just have to make the holes wider to insert the blades. Be sure to think about where the center of gravity will be located. To do this, an additional heavy metal plate is built into the platform.
Knife sharpening stand
You can make a stand for sharpening knives with your own hands from wood and metal. Also, for convenience, conventional sharpening devices are simply attached to pieces of chipboard or plywood, then screwed to the table in the workshop. In the video below you will learn how to make a simple version of a sharpening device with a holder.
Variety of sizes and shapes
In stores you can see a variety of different shapes and sizes of these stands. If you have a shortage of space, then it would be most logical to use a stand in the form of a cylinder. Also, the most popular are the classic square and rectangular shapes.
When choosing a cabinet, owners usually rely on the interior features of their kitchen.
Products whose diameter is large enough are designed to store more than six different knives. The height of such stands varies from 16 to 40 cm. In order to comfortably store large kitchen appliances, it is recommended to use a high-height stand.
Ceramic aristocracy and fragility do not allow careless treatment of the product.
