Roller blinds day - night on plastic windows: types, installation

Day-night roller blinds are an innovation that quickly gained the trust of people. That is why they take first place in the sales market and receive the approval of customers. This sun protection system is called “zebra” because of its striped color.

Such a curtain has many advantages, but one of the most important over other products in this category is regulation of the flow of sunlight. This is achieved due to the special structure and double fabric. The material for creating such products is quite specific and has a number of individual characteristics.

Operating principle

Roller blinds contain small features of classic curtains and standard blinds. In the situation of blinds, the principle of operation involves winding them onto a shaft, thereby covering the window opening. And in a roll system, day and night, the strips of fabric remain in the same plane.

The darkened part will block the sun, but, nevertheless, transmit sunlight through the light areas. If necessary, you can raise the product, and then sunlight will fill the room.

Description and design features

The day-night roller blind is a long canvas consisting of alternating strips of transparent and dense structure of the same width. The mesh strip is designed to replace the classic daytime tulle, which allows light to pass through and hides everything that happens inside the room from prying eyes until night falls.

The thicker strip is similar in quality to night curtains, which completely block out light.

To understand how something like this would look tightly on a window, you can imagine striped material that was hung on a horizontal bar. If you pull one edge, the transparent and “blank” stripes will begin to move, periodically overlapping each other.

When the tulle stripes coincide, uniform gaps open. If the mesh is covered by a dense part, then the entire surface turns into an opaque canvas.

Some brands sell such products under the name “Magic Night” curtain.

Materials and fabric

Types of fabric for roller blinds.

Cotton + polyester. By mixing two different components, natural cotton and synthetic polyester, the developer created a material that was universal in technical and operational properties.
Fabric "Skin". These are bi-fabrics consisting of plasticized fiberglass and polyvinyl chloride, the percentage ratio between which is 36 to 64.
Artificially burned. It is created using synthetic and natural fibers. It is scorched due to partial processing of the material at the production stage with soluble acids.
Blackout. It belongs to night fabrics because it is made from dense synthetic fibers.
Satin + polyester. In some cases, the outer layer of such roller blinds is treated with durable acrylic.

These are popular materials for the production of such products. Each is characterized by increased wear resistance and ease of maintenance.

Material for roller blinds

The material of roller blinds repels dust and has antistatic properties.
Fabric for roller blinds must have certain properties. Other materials are not used, since all the functionality of the rolled products will be lost. The fabric characteristics should be as follows:

dust-repellent;
antistatic;
synthetics are impregnated with Teflon.

Proper manufacturing ensures that the fabric is lightweight, it should weigh approximately 110 g/sq.m. Thanks to this, caring for curtains is simple and convenient, which adds another plus to the overall benefits. To clean them you will need a dry brush, but if they are very dirty you will have to use a wet sponge.

If the curtain is too dirty, contact a cleaning specialist as rough cleaning can damage the mechanism.

A distinctive feature between this fabric and the usual type is the structure of the structure, namely the measured alternation of light and dense stripes. Thanks to this, the fabrics are placed on top of each other and an effect is obtained, the meaning of which is contained in the name - “day-night”.

The owner of such curtains can create artificial twilight. This effect is achieved by overlaying light stripes on dense ones. Adjusting the tilt will provide the opportunity to choose the optimal lighting in the room.

Kinds

Without exception, blinds are divided into types. They are not just a fashionable decorative item, but a functional item.

Open

Such a device consists of a shaft with dense fabric attached to it, a mechanism and a strip. Products are created in different diameters, main element, type of fabric and shape. Moreover, each curtain has absolutely the same functionality.

When choosing an open type, do not forget that the larger the product, the wider the shaft diameter.

Closed

This type is characterized by the presence of a box that covers both the roll itself and the shaft. Such blinds can be either the width of the glass unit or the size of the window opening.

Cassette

The main difference from the closed one is that it does not have a box, which is designed to completely cover the shaft and blade.

Otherwise they are completely identical.

By type of control

Roller blinds come with different control mechanisms.

Using a plastic chain or cord

This is the easiest way to operate a roller blind. Height adjustment occurs through a regular chain attached to the product.

It can be installed on one of the sides of the mounts. When used strictly according to the instructions, it will last a long time.

Mechanical spring installation

This device helps lift the canvas from bottom to top. Thanks to the springs, fixation occurs automatically. Adjusting the canvas will not be a hassle for the owners.

Using an electric motor

It must be said that this is a short-lived control mechanism and is installed only on windows with hard-to-reach places. An electric motor moves the curtain.

Day-night system

Correct installation of roller blinds will allow you to effectively control the flow of light. You can do the whole process yourself thanks to short instructions. Fastening occurs as follows:

one edge is attached to the shaft (rotating);
the second is passed through the bottom and attached to the rail, which must first be fixed;
if installed correctly, the bottom bar will allow you to lay a two-layer curtain;
the mechanism is checked by a chain that controls the entire system.

If all manipulations are carried out according to the instructions, then it will be possible to regulate not only the overlap of layers on top of each other, but also the lifting height. The lock, which is built into the system for selecting the length level, is very easy to operate. For more information about window measurements and installing curtains, watch this video:

Another positive feature is the regulation of each element separately, that is, the ability to layer layers on top of each other.

Fastenings

How to install roller blinds day-night? Several types of installation are discussed below.

Mini system

In this case, the curtain is installed on each window sash. The advantage is that such a mount does not require drilling the frame in advance; anyone can handle a “mini” mount.

To prevent the filter fabric from drooping in the future, the lower guide area should be metal. Or a simple option is to attach a magnet to the bottom.

To the ceiling

As a rule, products of this design are not long and slightly touch the window sill. But there are options that cover the entire window opening and drop 10-20 centimeters below the window sill.

These sizes are enough to protect the room from direct sunlight and prying eyes.

To the ceiling

Mini system

To frame

How to hang roller blinds day and night? Depending on the type of roller blinds, the size of the indentation is determined. This can be easily done from the top point of the window frame, where the blinds will be attached.

Then the mount is installed. Such products have two types of fastening - with self-tapping screws and double-sided construction tape.

On double-sided tape without drilling

The easiest way to install. To install using double-sided tape without drilling, you will need to perform the following steps:

install the cap fasteners on the top bar of the curtain;
peel off the protective layer of double-sided tape;
press the bar tightly against the window sash or the top of the frame so that the tape sticks well;
Attach a weighting agent to the bottom of the curtain.

This completes the installation.

The design of some fasteners does not allow them to be glued exactly so that they hold well. This is due to the presence of protruding parts that can serve as a bracket. In such a case, the protruding parts must be carefully broken off. In this case, the procedure must be performed in such a way as not to harm the rest of the fastening.

Installation Features

Roller blinds day-night installation instructions allow you to fasten them in three different options.

For self-tapping screws

The metal attachments are adjusted to the window frame and screwed into the already made mounting hole using two self-tapping screws. The latches from it are attached to the shaft of the day-night roller blind, then they are pushed into standard attachments using slight pressure by hand.

The installation process is completed by securing the decorative caps from the nozzles.

Installation on brackets

For self-tapping screws

With double-sided tape

On brackets

Metal or plastic spring bracket.

The method of their installation is similar to the previous one, but instead of self-tapping screws, hinged brackets are used, which snap into classic fasteners.

With double-sided tape

Special attachments are installed on the brackets. The base is treated with alcohol for degreasing. The adhesive tape is heated using an electric hair dryer, the protective film is removed from it, and it is glued to the surface of the window frame by pressing firmly.

This system is convenient and gaining popularity because it allows you to avoid damaging windows by drilling.

Types and installation of curtains

According to the name, they are divided into two types: open and closed. Closed implies the presence of special boxes into which the curtains go. Open ones, in turn, do not hide, but remain visible. For more information about installing closed roller blinds, watch this video:

Before choosing roller blinds, consult with a specialist which type of these products will suit your window frame (window shape).

Installing curtains is easy, but unique. Installation can be carried out in any place the owner chooses. For example, laconic windows allow you to attach roller shutters to the sash. This installation is very convenient in the presence of rotary systems. Thanks to this, the window structure remains intact.

Care

In any room, dirt and dust constantly accumulate on rolls. This process cannot be avoided or managed, even if the housewife regularly performs wet cleaning around the house.

Standard curtains need to be removed; they are long and impractical, and they have to be washed regularly. A significant advantage is that they do not require special care. You need to wipe them with a damp cloth a couple of times a week.

Zebra curtains cannot be washed in a washing machine, nor can they be vacuumed. Zebra blinds can be treated with a special dust-repellent liquid, but this matter is best left to professionals.

Operating principle of day-night blinds

Unlike classic roller blinds, the mechanism of an unusual curtain provides for the simultaneous movement of two canvases to achieve an overlap effect. Both fabric strips are fixed on a rotating shaft, secured on the sides by rigid structures. The fabric has the form of a roll that can be unrolled or twisted with a plastic chain.

At the bottom of the front part of the canvas, a heavier strip is attached, which prevents the material from developing from the wind if the window is slightly open. The kit also includes guide structures on the sides (strings or plastic slats). They are fixed on the upper side blocks that hold the roll, and plastic locks on the lower level of the window. Fittings and spare parts for adjustment are supplied with the main blade.

We take the necessary measurements

Take measurements of the existing window opening or glass measurements if the roller blinds will be attached to the frame. This will allow you to correctly cut the woven fabric, which will fully match the size of the existing windows. The width of the curtains is 2-4 centimeters larger than the existing width of the opening. The length is approximately 10-15 centimeters longer than the opening.

Product advantages

Using this option in your home is the best solution. Ready-to-install blinds have a huge number of positive characteristics. Here are some of them:

Regulating the flow of light into a room is not difficult. Due to the unique design of the canvas, there is no need to lift everything, but you only need to slightly change the location of the strips.
There are no glares that appear from sunlight, which creates a unique interior.
Straight and distinct lines visually increase the space.
Day-night doors can be made to order and in the sizes required.
The surface of the canvas can be decorated with any design you like.
The color range is wide.
The product brings savings, since when purchasing blinds, you do not need to spend money on tulle or curtains, which must be washed regularly.
They are very easy to clean; just wipe them periodically with a damp cloth.
They are durable.

Advantages of roller blinds

The popularity of roller blinds is due to their many advantages. The following can be distinguished from them:

It is possible to use such roller blinds as an independent element of window design or as an addition to existing curtains. This significantly expands the scope for creativity, which allows you to realize your wildest design ideas by decorating the room to your liking.
Roller blinds, due to their functionality, simplicity of design and attractive appearance, have today almost completely replaced the blinds that were popular in the past. This design option is ideal for plastic windows, and due to its versatility it can be used in classic and modern interior design styles.
It is possible to use roller blinds with plastic double-glazed windows and wooden windows. It is possible to design windows with high quality, regardless of their material, shape and design.
Roller blinds that are correctly sized and installed with high quality will fit tightly to the windows, which solves the problem of curious glances from passers-by. In particular, such roller blinds will be relevant for owners of private cottages and residents of the first floors of high-rise buildings.
The design of the curtains allows you to completely darken the room or reduce the intensity of the bright sun. It is possible to choose a canvas with different light transmittance characteristics, which will solve the problem of room lighting during daylight hours.
Such designs are distinguished by durability, quality and wear resistance.
Throughout their entire service life, such roller blinds retain all their functionality.
The variety of options available allows you to choose them both to match the characteristics of specific windows and the style of room design.
It is possible to independently produce such roller blinds, which allows you to save on window decoration.